Bimetallic lanthanide complexes that display a ratiometric response to oxygen concentrations

Effective photosensitized emission of a Tb(III) complex using a β-diketonate photosensitizer and an oxygen barrier system in a thermally populated triplet state

Photosensitizer design of luminescent terbium (Tb(III)) complexes with narrow bandwidths is important for advancing luminescent materials. In this study, we report an effective photosensitizer model in a thermally populated lowest excited triplet (T1) state during Tb(III) emission. The Tb(III) complex comprises a Tb(III) ion (serving as an emission center), hexafluoroacetylacetonates (acting as photosensitizer ligands), and bulky cyclohexyl group-attached phosphine-oxide-type ligands (functioning as an oxygen barrier system). Emission properties including emission and excitation spectra, ligand-excited emission quantum yields, and emission lifetimes were evaluated in the absence and presence of oxygen. Coordination geometry structures were determined through analysing single-crystal structures. The electronic structure based on 4f-orbitals was estimated from radiative rate constants and quantum chemical calculations. The bulky phosphine oxide ligand not only provides an oxygen barrier system but also induces an electronic structural modulation based on 4f-orbitals, allowing for effective photosensitized Tb(III) emission in a thermally populated ligand T1 state in air.

Thermally-assisted photosensitized emission in a trivalent terbium complex

Luminescent lanthanide complexes containing effective photosensitizers are promising materials for use in displays and sensors. The photosensitizer design strategy has been studied for developing the lanthanide-based luminophores. Herein, we demonstrate a photosensitizer design using dinuclear luminescent lanthanide complex, which exhibits thermally-assisted photosensitized emission. The lanthanide complex comprised Tb(III) ions, six tetramethylheptanedionates, and phosphine oxide bridge containing a phenanthrene frameworks. The phenanthrene ligand and Tb(III) ions are the energy donor (photosensitizer) and acceptor (emission center) parts, respectively. The energy-donating level of the ligand (lowest excited triplet (T₁) level = 19,850 cm^-1) is lower than the emitting level of the Tb(III) ion (⁵D₄ level = 20,500 cm^-1). The long-lived T₁ state of the energy-donating ligands promoted an efficient thermally-assisted photosensitized emission of the Tb(III) acceptor (⁵D₄ level), resulting in a pure-green colored emission with a high photosensitized emission quantum yield (73%).

Tuning the Thermometric Features in 1D Luminescent EuIII and TbIII Coordination Polymers through Different Bridge Phosphine Oxide Ligands

Tb^III and Eu^III systems have been investigated as ratiometric luminescent temperature probes in luminescent coordination polymers due to Tb^III → Eu^III energy transfer (ET). To help understand how ion-ion separation, chain conformation as well as excitation channel impact their thermometric properties, herein, [Eu(tfaa)₃(μ-L)Tb(tfaa)₃]_n one-dimensional (1D) coordination polymers (tfaa^- = trifluoroacetylacetonate, and L = [(diphenylphosphoryl)R](diphenyl)phosphine oxide, R = ethyl - dppeo - or butyl - dppbo) were synthesized. The short μ-dppeo bridge ligand leads to a more linear 1D polymeric chain, while the longer μ-dppbo bridge leads to tighter packed chains. As the temperature rises from 80 K, upon direct Tb^III excitation at 488 nm, the Tb^III emission intensity decreases, while the Eu^III emission intensity increases after 160 and 200 K when L = dppeo or dppbo, respectively. The temperature-dependent emission intensities, due to Tb^III → Eu^III ET, enable the development of ratiometric luminescent temperature probes featuring maximum relative thermal sensitivity up to 3.8% K^-1 (250 K, L = dppbo, excitation at 488 nm). On the other hand, the same system displays maximum thermal sensitivity up to 3.5% K^-1 (323 K) upon ligand excitation at 300 nm. Thus, by changing the excitation channel and bridge ligand that leads to modification of the polymer conformations, the maximum relative thermal sensitivity can be tuned.

Luminescent Lanthanide Complexes for Effective Oxygen-Sensing and Singlet Oxygen Generation

Oxygen quantification using luminescence has attracted considerable attention in various fields, including environmental monitoring and clinical analysis. Among the reported luminophores, trivalent lanthanide complexes have displayed characteristic narrow emission bands with high brightness. This bright emission is based on photo-sensitized energy transfer via organic triplet states. The organic triplet states in lanthanide complexes effectively react with the triplet oxygen, enabling oxygen quantification by lanthanide luminescence. Some Tb^III and Eu^III complexes with slow deactivation processes have also formed the excited state equilibrium, thus resulting in the emission-lifetime based oxygen sensing property. The combination of Tb^III /Eu^III emission, Eu^III /Sm^III emission, Eu^III /ligand phosphorescence, and ligand fluorescence/ligand phosphorescence provide the ratiometric oxygen-sensing properties. Moreover, the reaction generates singlet oxygen species which exhibit numerous applications in the photo-medical field. The ligands with large π-conjugated aromatic systems, such as porphyrin, phthalocyanine, and polyaromatic compounds, induces highly efficient oxygen generation. The combination of effective luminescence with singlet-oxygen generation by the lanthanide complexes render them suitable for photo-driven theranostics. This review summarizes the research progress of lanthanide complexes with efficient oxygen-sensing and singlet-oxygen generation properties.

Facile Solvent-Free Mechanochemical Synthesis of UI3 and Lanthanoid Iodides

Lewis base-free lanthanoid (Ln) and actinoid (An) iodides are difficult to obtain, as standard protocols describe syntheses in solutions of donor solvents which are ultimately hard to remove. We have now established a mechanochemical approach towards the synthesis of Lewis base-free f-block metal iodides with excellent yields. In particular, we describe herein the synthesis of EuI2 as an example of a divalent lanthanoid iodide, of CeI3 as an example of a trivalent lanthanoid iodide, and of UI3 as the most important actinoid iodide. Each can be obtained in high yield with minimal work-up, presenting the most efficient and simple synthetic route to access these materials to date.

Bifunctional Temperature and Oxygen Dual Probe Based on Anthracene and Europium Complex Luminescence

In this work, we synthesized a polydimethylsiloxane membrane containing two emitter groups chemically attached to the membrane structure. For this, we attached the anthracene group and the [Eu(bzac)₃] complex as blue and red emitters, respectively, in the matrix via hydrosilylation reactions. The synthesized membrane can be used as a bifunctional temperature and oxygen ratiometric optical probe by analyzing the effects that temperature changes and oxygen levels produce on the ratio of anthracene and europium(III) emission components. As a temperature probe, the system is operational in the 203-323 K range, with an observed maximum relative sensitivity of 2.06% K^-1 at 290 K and temperature uncertainties below 0.1 K over all the operational range. As an oxygen probe, we evaluated the ratiometric response at 25, 30, 35, and 40 °C. These results show an interesting approach to obtaining bifunctional ratiometric optical probes and also suggest the presence of an anthracene → europium(III) energy transfer, even though there is no chemical bonding between species.

Cyclometalated iridium-coumarin ratiometric oxygen sensors: improved signal resolution and tunable dynamic ranges

In this work we introduce a new series of ratiometric oxygen sensors based on phosphorescent cyclometalated iridium centers partnered with organic coumarin fluorophores. Three different cyclometalating ligands and two different pyridyl-containing coumarin types were used to prepare six target complexes with tunable excited-state energies. Three of the complexes display dual emission, with fluorescence arising from the coumarin ligand, and phosphorescence from either the cyclometalated iridium center or the coumarin. These dual-emitting complexes function as ratiometric oxygen sensors, with the phosphorescence quenched under O2 while fluorescence is unaffected. The use of blue-fluorescent coumarins results in good signal resolution between fluorescence and phosphorescence. Moreover, the sensitivity and dynamic range, measured with Stern-Volmer analysis, can be tuned two orders of magnitude by virtue of our ability to synthetically control the triplet excited-state ordering. The complex with cyclometalated iridium 3MLCT phosphorescence operates under hyperoxic conditions, whereas the two complexes with coumarin-centered phosphorescence are sensitive to very low levels of O2 and function as hypoxic sensors.

A europium(III)-based nanooptode for bicarbonate sensing - a multicomponent approach to sensor materials

Lanthanide luminescence contains detailed chemical information and can be used to report on several chemical analytes. This has been exploited through elaborate synthesis of responsive lanthanide complexes. Here, we report on a less elaborate approach and assemble four different nanooptodes. Europium(III) is used to sense the bicarbonate concentration. The signal from the optode was enhanced 100 times using antenna chromophore and the response was modulated by the addition of lipophilic cations.

Effective Photosensitization in Excited-State Equilibrium: Brilliant Luminescence of TbIII Coordination Polymers Through Ancillary Ligand Modifications

Molecular photosensitizers provide efficient light-absorbing abilities for photo-functional materials. Herein, effective photosensitization in excited-state equilibrium is demonstrated using five Tb^III coordination polymers. The coordination polymers are composed of Tb^III ions (emission center), hexafluoroacetylacetonato (photosensitizer ligands), and phosphine oxide-based bridges (ancillary ligands). The two types of ligand combinations induces a rigid coordination structure via intermolecular interactions, resulting in high thermal stability (with decomposition temperatures above 300 °C). Excited-triplet-state lifetimes of photosensitizer ligands (τ=120-1320 μs) are strongly dependent on the structure of the ancillary ligands. The photosensitizer with a long excited-triplet-state lifetime (τ≥1120 μs) controls the excited state equilibrium between the photosensitizer and Tb^III , allowing the construction of Tb^III coordination polymer with high Tb^III emission quantum yield (≥70 %).

Studies of pyrroloquinoline quinone species in solution and in lanthanide-dependent methanol dehydrogenases

Pyrroloquinoline quinone (PQQ) is a redox cofactor in calcium- and lanthanide-dependent alcohol dehydrogenases that has been known and studied for over 40 years. Despite its long history, many questions regarding its fluorescence properties, speciation in solution and in the active site of alcohol dehydrogenase remain open. Here we investigate the effects of pH and temperature on the distribution of different PQQ species (H₃PQQ to PQQ^3- in addition to water adducts and in complex with lanthanides) with NMR and UV-Vis spectroscopy as well as time-resolved laser-induced fluorescence spectroscopy (TRLFS). Using a europium derivative from a new, recently-discovered class of lanthanide-dependent methanol dehydrogenase (MDH) enzymes, we utilized two techniques to monitor Ln binding to the active sites of these enzymes. Employing TRLFS, we were able to follow Eu(III) binding directly to the active site of MDH using its luminescence and could quantify three Eu(III) states: Eu(III) in the active site of MDH, but also in solution as PQQ-bound Eu(III) and in the aquo-ion form. Additionally, we used the antenna effect to study PQQ and simultaneously Eu(III) in the active site.

Bright red emission with high color purity from Eu(iii) complexes with π-conjugated polycyclic aromatic ligands and their sensing applications

Eu(iii) complexes emit red light with a high color purity and have consequently attracted attention for development toward display and physical sensing applications. The characteristic pure color emission originates from the intra-4f–4f transition, and the brightness strongly depends on the electronic and steric structures of organic ligands. A large π-conjugated ligand design with a large absorption coefficient has been actively studied for achieving bright emission. The π-conjugated Eu(iii) luminophores also provide oxygen and temperature sensing properties by controlling their excited state dynamics based on π-electron systems. A comprehensive understanding of the design strategy of large π-conjugated ligands is crucial for the further development of luminescent Eu(iii) complexes. In this review, we summarize the research progress on π-conjugated Eu(iii) luminophores exhibiting bright emission and their physical sensing applications.

In this review, we summarize the research progress on π-conjugated Eu(iii) luminophores exhibiting bright emission and their physical sensing applications.

Ratiometric Luminescence Detection of Copper(I) by a Resonant System Comprising Two Antenna/Lanthanide Pairs

Selective and sensitive detection of Cu(I) is an ongoing challenge due to its important role in biological systems, for example. Herein, we describe a photoluminescent molecular chemosensor integrating two lanthanide ions (Tb³⁺ and Eu³⁺) and respective tryptophan and naphthalene antennas onto a polypeptide backbone. The latter was structurally inspired from copper-regulating biomacromolecules in Gram-negative bacteria and was found to bind Cu⁺ effectively under pseudobiological conditions (log K_Cu⁺ = 9.7 ± 0.2). Ion regulated modulation of lanthanide luminescence in terms of intensity and long, millisecond lifetime offers perspectives in terms of ratiometric and time-gated detection of Cu⁺. The role of the bound ion in determining the photophysical properties is discussed with the aid of additional model compounds.

Tuning Excited-State Properties of [2.2]Paracyclophane-Based Antennas to Ensure Efficient Sensitization of Lanthanide Ions or Singlet Oxygen Generation

The multistep synthesis of original antennas incorporating substituted [2.2]paracyclophane (pCp) moieties in the π-conjugated skeleton is described. These antennas, functionalized with an electron donor alkoxy fragment (A¹) or with a fused coumarin derivative (A²), are incorporated in a triazacyclonane macrocyclic ligand L¹ or L², respectively, for the design of Eu(III), Yb(III), and Gd(III) complexes. A combined photophysical/theoretical study reveals that A¹ presents a charge transfer character via through-space paracyclophane conjugation, whereas A² presents only local excited states centered on the coumarin-paracyclophane moiety, strongly favoring triplet state population via intersystem crossing. The resulting complexes EuL¹ and YbL² are fully emissive in red and near-infrared, respectively, whereas the GdL² complex acts as a photosensitizer for the generation of singlet oxygen.

Orthogonal binding and displacement of different guest types using a coordination cage host with cavity-based and surface-based binding sites

The octanuclear Co(ii) cubic coordination cage system H (or HW if it bears external water-solubilising substituents) has two types of binding site for guests. These are (i) the partially-enclosed central cavity where neutral hydrophobic organic species can bind, and (ii) the six 'portals' in the centres of each of the faces of the cubic cage where anions bind via formation of a network of CH⋯X hydrogen bonds between the anion and CH units on the positively-charged cage surface, as demonstrated by a set of crystal structures. The near-orthogonality of these guest binding modes provides the basis for an unusual dual-probe fluorescence displacement assay in which either a cavity-bound fluorophore (4-methyl-7-amino-coumarin, MAC; λ_em = 440 nm), or a surface-bound anionic fluorophore (fluorescein, FLU; λ_em = 515 nm), is displaced and has its emission ‘switched on’ according to whether the analyte under investigation is cavity-binding, surface binding, or a combination of both. A completely orthogonal system is demonstrated based using a Hw/MAC/FLU combination: addition of the anionic analyte ascorbate displaced solely FLU from the cage surface, increasing the 515 nm (green) emission component, whereas addition of a neutral hydrophobic guest such as cyclooctanone displaced solely MAC from the cage central cavity, increasing the 440 nm (blue) emission component. Addition of chloride results in some release of both components, and an intermediate colour change, as chloride is a rare example of a guest that shows both surface-binding and cavity-binding behaviour. Thus we have a colourimetric response based on differing contributions from blue and green emission components in which the specific colour change signals the binding mode of the analyte. Addition of a fixed red emission component from the complex [Ru(bipy)₃]²⁺ (Ru) provides a baseline colour shift of the overall colour of the luminescence closer to neutral, meaning that different types of guest binding result in different colour changes which are easily distinguishable by eye.

Orthogonal binding of neutral or anionic fluorophores to the cavity or surface, respectively, of a coordination cage host allows a dual-probe displacement assay which gives a different fluorescence colorimetric response according to where analyte species bind.

Bioinspired Luminescent Europium-Based Probe Capable of Discrimination between Ag+ and Cu. Inorg Chem 2021;60:10791-10798. [PMID: 34236828 DOI: 10.1021/acs.inorgchem.1c01486]

Due to their similar coordination properties, discrimination of Cu⁺ and Ag⁺ by water-soluble luminescent probes is challenging. We have synthesized LCC4^Eu, an 18 amino acid cyclic peptide bearing a europium complex, which is able to bind one Cu⁺ or Ag⁺ ion by the side chains of two methionines, a histidine and a 3-(1-naphthyl)-l-alanine. In this system, the naphthyl moiety establishes a cation-π interaction with these cations. It also acts as an antenna for the sensitization of Eu³⁺ luminescence. Interestingly, when excited at 280 nm, LCC4^Eu behaves as a turn-on probe for Ag⁺ (+150% Eu emission) and as a turn-off probe for Cu⁺ (-50% Eu³⁺ emission). Shifting the excitation wavelength to 305 nm makes the probe responsive to Ag⁺ (+380% Eu³⁺ emission) but not to Cu⁺ or other physiological cations. Thus, LCC4^Eu is uniquely capable of discriminating Ag⁺ from Cu⁺. A detailed spectroscopic characterization based on steady-state and time-resolved measurements clearly demonstrates that Eu³⁺ sensitization relies on electronic energy transfer from the naphthalene triplet state to the Eu³⁺ excited states and that the cation-π interaction lowers the energy of this triplet state by 700 and 2400 cm^-1 for Ag⁺ and Cu⁺, respectively. Spectroscopic data point to a modulation of the efficiency of the electronic energy transfer caused by the differential red shift of the naphthalene triplet, deciphering the differential luminescence response of LCC4^Eu toward Ag⁺ and Cu⁺.

The design of responsive luminescent lanthanide probes and sensors

The principles of the design of responsive luminescent probes and sensors based on lanthanide emission are summarised, based on a mechanistic understanding of their mode of action. Competing kinetic pathways for deactivation of the excited states that occur are described, highlighting the need to consider each of the salient quenching processes. Such an analysis dictates the choice of both the ligand and its integral sensitising moiety for the particular application. The key aspects of quenching involving electron transfer and vibrational and electronic energy transfer are highlighted and exemplified. Responsive systems for pH, pM, pX and pO₂ and selected biochemical analytes are distinguished, according to the nature of the optical signal observed. Signal changes include both simple and ratiometric intensity measurements, emission lifetime variations and the unique features associated with the observation of circularly polarised luminescence (CPL) for chiral systems. A classification of responsive lanthanide probes is introduced. Examples of the operation of probes for reactive oxygen species, citrate, bicarbonate, α₁-AGP and pH are used to illustrate reversible and irreversible transformations of the ligand constitution, as well as the reversible changes to the metal primary and secondary coordination sphere that sensitively perturb the ligand field. Finally, systems that function by modulation of dynamic quenching of the ligand or metal excited states are described, including real time observation of endosomal acidification in living cells, rapid urate analysis in serum, accurate temperature assessment in confined compartments and high throughput screening of drug binding to G-protein coupled receptors.

Electron transfer pathways in photoexcited lanthanide(iii) complexes of picolinate ligands

A series of luminescent lanthanide(iii) complexes consisting of 1,4,7-triazacyclononane frameworks and three secondary amide-linked carbostyril antennae were synthesised. The metal binding sites were augmented with two pyridylcarboxylate donors yielding octadentate ligands. The antennae carried methyl, methoxymethyl or trifluoromethyl substituents in their 4-positions, allowing for a range of excited state energies and antenna electronic properties. The ¹H NMR spectra of the Eu(iii) complexes were found to be analogous to each other. Similar results were obtained in the solid-state by single-crystal X-ray crystallography, which showed the structures to have nine-coordinate metal ions with heavily distorted tricapped trigonal prismatic geometries. Steady-state and time-resolved luminescence spectroscopy showed that the antennae could sensitize both Tb(iii) and Eu(iii), however, quantum yields were lower than in other octadentate complexes lacking pyridylcarboxylate. Complexes with more electron-poor pyridines were less emissive even when equipped with the same antenna. The oxidation and reduction potentials of the antennae and the pyridinecarboxylates, respectively, were determined by cyclic voltammetry. The obtained values were consistent with electron transfer from the excited antenna to the pyridine providing a previously unexplored quenching pathway that could efficiently compete with energy transfer to the lanthanide. These results show the crucial impact that photophysically innocent ligand binding sites can have on lanthanide luminescence.

Combining the Best of Two Chelating Titans: A Hydroxypyridinone-Decorated Macrocyclic Ligand for Efficient and Concomitant Complexation and Sensitized Luminescence of f-Elements

An ideal chelator for f-elements features rapid kinetics of complexation, high thermodynamic stability, and slow kinetics of dissociation. Here we present the facile synthesis of a macrocyclic ligand bearing four 1-hydroxy-2-pyridinone units linked to a cyclen scaffold that rapidly forms thermodynamically stable complexes with lanthanides (Sm³⁺ , Eu³⁺ , Tb³⁺ , Dy³⁺ ) and a representative late actinide (Cm³⁺ ) in aqueous media and concurrently sensitizes them. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed an increase in the Ln/An-O bond lengths following the trend Cm>Eu>Tb and EXAFS data were compatible with time-resolved luminescence studies, which indicated one to two water molecules in the inner metal coordination sphere of Eu(III) and two water molecules for the Cm(III) complex. Spectrofluorimetric ligand competition titrations against DTPA confirmed the high thermodynamic stability of DOTHOPO complexes, with pM values between 19.9(1) and 21.9(2).

Tuning the anion binding properties of lanthanide receptors to discriminate nucleoside phosphates in a sensing array

The development of synthetic receptors for the selective binding and discrimination of anions in water requires an understanding of how anions interact with these synthetic receptors. Molecules designed to differentiate nucleoside phosphate anions (e.g. ATP, ADP, GTP, GDP, UDP) under physiological conditions could underpin exciting new sensing tools for biomedical research and drug discovery, but it is very challenging due to the similarities in anion structure, size and charge. We present a series of lanthanide-based anion receptors and establish key structural elements that impact on nucleoside phosphate anion binding and sensing. Structural evidence of anion binding using X-ray crystallographic and NMR data, supported by DFT calculations indicate the binding modes between the lanthanide complexes and certain phosphoanions, revealing a bidentate (α-, γ-) binding mode to ATP. We further use four of the receptors to allow discrimination of eight nucleoside phosphate anions in the first array-based assay using lanthanide complexes, taking advantage of the multiple emission bands and long emission lifetimes associated with luminescent lanthanide complexes.

Enhancing 31P NMR relaxation rates with a kinetically inert gadolinium complex

The kinetically stable heptadentate gadolinium complex Gd.pDO3A (1.Gd) demonstrates significant 31P nuclear magnetic resonance (NMR) relaxation enhancement of biologically relevant phosphate species; adenosine triphosphate (ATP), phosphocreatine (PCr) and inorganic phosphate. Gd.pDO3A (1.Gd) binds these species in fast exchange, enabling the relaxation of the bulk phosphate species in solution. This gives rise to 31P relaxation enhancements up to 250-fold higher than those observed for 31P relaxation enhancements with the commercial MRI contrast agent Gd.DOTA (DOTAREM), 2. Gd.pDO3A-like complexes may have potential applications as 31P magnetic resonance contrast agents, since shortening the T1 relaxation time of phosphate species would reduce the time needed to acquire 31P-MR spectra.

Solvatochromic dual luminescence of Eu–Au dyads decorated with chromophore phosphines

Chromophore-containing phosphines produce highly solvatochromic gold(i) fluorophores. Their combination with red-emitting Eu centers offers a facile approach to dual emissive complexes with widely tunable luminescence characteristics.

Near-IR Luminescent YbIII Coordination Polymers Composed of Pyrene Derivatives for Thermostable Oxygen Sensors

Oxygen-sensitive and near-infrared (NIR) luminescent Yb^III coordination polymers incorporating ligands based on pyrene derivatives were synthesized: Yb^III -TBAPy and Yb^III -TIAPy (TBAPy: 1,3,6,8-tetrakis(p-benzoate)pyrene; TIAPy: 1,3,6,8-tetrakis(3,5-isophthalic acid)pyrene). The coordination structures of these materials have been characterized by means of electrospray ionization mass spectrometry, X-ray diffraction analysis, and thermogravimetric analysis. Moreover, the porous structure of Yb^III -TIAPy has been evaluated by measuring its N₂ adsorption isotherm. The NIR luminescence properties of Yb^III -TBAPy and Yb^III -TIAPy have been examined by acquiring emission spectra and determining emission lifetimes under air or argon and in vacuo. Yb^III -TIAPy exhibited high thermal stability (with a decomposition temperature of 400 °C), intense luminescence (with an emission quantum yield under argon of 6.6 %), and effective oxygen-sensing characteristics. These results suggest that NIR luminescent Yb^III coordination polymers prepared using pyrene derivatives could have applications in novel thermo-stable oxygen sensors.

Chirality transfer between hexaazamacrocycles in heterodinuclear rare earth complexes

Both the chiral hexaazamacrocyle L1 based on trans-1,2-diaminocyclohexane and the achiral hexaazamacrocyle L2 based on ethylenediamine form lanthanide(iii) dinuclear μ-hydroxo bridged complexes which have been characterized by NMR and CD spectroscopy. The homodinuclear complexes of the type [Ln₂(L1)₂(μ-OH)₂](NO₃)₄ (Ln = Nd^III, Eu^III, Tb^III and Yb^III) have been synthesized in the enantiopure form and the X-ray crystal structures of Nd^III, Eu^III and Yb^III derivatives have been determined. The heterodinuclear cationic complexes [Ln(L1)Ln'(L2)(μ-OH)₂X₂]ⁿ⁺ have been generated and characterized in solution by using the mononuclear complexes of L1 and L2 as substrates. While the formation of [LnLn'(L1)₂(μ-OH)₂X₂]ⁿ⁺ dinuclear complexes is accompanied by chiral narcissistic self-sorting, the formation of [Ln(L1)Ln'(L2)(μ-OH)₂X₂]ⁿ⁺ dinuclear complexes is accompanied by the sizable sociable self-sorting of macrocyclic units. The homodinuclear complexes [Y₂(L1)₂(μ-OH)₂X₂]ⁿ⁺ and [Ln₂(L2)₂(μ-OH)₂X₂]ⁿ⁺ (Ln = Dy^III, Pr^III and Nd^III) are CD silent in the visible region due to the lack of f-f transitions and the presence of an achiral ligand, respectively. In contrast, the heterodinuclear [Y(L1^S)Ln(L2)(μ-OH)₂X₂]ⁿ⁺ complexes give rise to CD signals arising from the f-f transitions because of the chirality transfer from the L1 macrocyclic unit to the L2 macrocyclic unit.

Cyclometalated iridium-BODIPY ratiometric O2 sensors

Here we introduce a new class of ratiometric O2 sensors for hypoxic environments. Two-component structures composed of phosphorescent cyclometalated Ir(iii) complexes and the well-known organic fluorophore BODIPY have been prepared by the 1 : 1 reaction of bis-cyclometalated iridium synthons with pyridyl-substituted BODIPY compounds. Two different cyclometalating ligands are used, which determine the relative energies of the iridium-centered and BODIPY-centered excited states, and the nature of the linker between iridium and BODIPY also has a small influence on the photoluminescence. Some of the conjugates exhibit dual emission, with significant phosphorescence from the iridium site and fluorescence from the BODIPY, and thus function as ratiometric oxygen sensors. Oxygen quenching experiments demonstrate that as O2 is added the phosphorescence is quenched while the fluorescence is unaffected, with dynamic ranges that are well suited for hypoxic sensing (pO2 < 160 mmHg).

Life sensors: current advances in oxygen sensing by lanthanide complexes

Oxygen is essential for life. Inspired by the importance of oxygen, we present this critical and current review on lanthanide-based oxygen sensors.

Effects of europium spectral probe interchange in Ln-dyads with cyclen and phen moieties

Antenna-lanthanide energy transfer is investigated via a bimetallic complex with one silent and one probe lanthanide ion, when their positions are interchanged in the complex.

Multimetallic Lanthanide Complexes: Using Kinetic Control To Define Complex Multimetallic Arrays

Kinetically inert lanthanide complexes are proving to be highly effective building blocks for the preparation of complex heterometallic architectures, allowing complete control of metal ion domains, which cannot be achieved under thermodynamic control. Kinetic stability may render perceivable labile coordination bonds more durable than several types of covalent interactions. For complexes in clinical use, the significance of kinetic stability cannot be overstated, and this Account treats the topic accordingly. Kinetically inert complexes can be used as building blocks for elaborate synthesis. For instance, it is now possible to prepare heterometallic lanthanide complexes containing two or more different lanthanide ions by linking kinetically robust complexes together. This approach can yield bimetallic (f-f' or d-f) and trimetallic (f-f'-f″) lanthanide complexes. In this Account, we describe our studies exploiting the slow dissociation of lanthanide complexes derived from 1,4,7,10-tetraazadodecane-1,4,7,10-tetraacetic acid (DOTA) related ligands to link complexes together through synthetic manipulation of pendent groups on the ligand skeleton or through coordination of bridging donor groups to a d-block metal center. In the course of this work, we have developed a variety of such methods, ranging from peptide coupling and diazotization to Ugi and click chemistry and have also explored the use of alternative strategies that combine orthogonal protecting group chemistry with sequential complexation of different lanthanide ions or that use self-assembly to deliver well-defined multimetallic systems. These well-defined bimetallic systems also have considerable scope for exploitation. Since the earliest studies, it has been clear that there is potential for application in the burgeoning field of molecular imaging. Heterometallic lanthanide complexes can be used as single-molecule bimodal imaging agents through incorporation of MRI active and luminescent components. Alternatively, conventional luminescence methods can be exploited in conjunction with lanthanide luminescence. In the simplest cases, a single lanthanide can be used to achieve a switchable response in combination with a transition metal complex. Bimetallic f-f' complexes allow the full potential of the approach to be realized in systems in which one lanthanide responds to changes in the concentration of an analyte, while a second lanthanide center can be used to define the concentration of the probe itself. This offers a new solution to the old dichotomy of ratiometric imaging that can potentially be applied widely.

ESIPT-Modulated Emission of Lanthanide Complexes: Different Energy-Transfer Pathways and Multiple Responses

Two series of isostructural lanthanide coordination complexes, namely, LIFM-42(Ln) (Ln=Eu, Tb, Gd, in which LIFM stands for the Lehn Institute of Functional Materials) and LIFM-43(Ln) (Ln=Er, Yb), were synthesized through the self-assembly of an excited-state intramolecular proton transfer (ESIPT) ligand, 5-[2-(5-fluoro-2-hydroxyphenyl)-4,5-bis(4-fluorophenyl)-1H-imidazol-1-yl]isophthalic acid (H₂ hpi2cf), with different lanthanide ions. In the coordination structures linked by the ligands and oxo-bridged Ln^III ₂ clusters (for LIFM-42(Ln) series) or isolated Ln^III ions (for LIFM-43(Ln) series), the ESIPT ligand can serve as both the host and antenna for protecting and sensitizing the photoluminescence (PL) of Ln^III ions. Meanwhile, the -OH⋅⋅⋅N active sites on the ligands are vacant, which provides availability to systematically explore the PL behavior of Ln complexes with ESIPT interference. Based on the accepting levels of different lanthanide ions, energy transfer can occur from the T₁ (K*) or T₁ (E*) (K*=excited keto form, E*=excited enol form) excited states of the ligand. Furthermore, the sensitized lanthanide luminescence in both visible and near-infrared regions, as well as the remaining K* emission of the ligand, can be modulated by the ESIPT responsiveness to different solvents, anions, and temperature.

Shining light on the antenna chromophore in lanthanide based dyes

Lanthanide based dyes and assays exploit the antenna effect, where a sensitiser-chromophore is used as a light harvesting antenna and subsequent excited state energy transfer populates the emitting lanthanide centred excited state. A rudimentary understanding of the design criteria for designing efficient dyes and assays based on the antenna effect is in place. By preparing kinetically inert lanthanide complexes based on the DO3A scaffold, we are able to study the excited state energy transfer from a 7-methoxy-coumarin antenna chromophore to europium(iii) and terbium(iii) centred excited states. By contrasting the photophysical properties of complexes of metal centres with and without accessible excited states, we are able to separate the contributions from the heavy atom effect, photoinduced electron transfer quenching, excited state energy transfer and molecular conformations. Furthermore, by studying the photophysical properties of the antenna chromophore, we can directly monitor the solution structure and are able to conclude that excited state energy transfer from the chromophore singlet state to the lanthanide centre does occur.

Highly luminescent lanthanide complexes sensitised by tertiary amide-linked carbostyril antennae

The replacement of the secondary amide linker that carries the sensitizing carbostyril antenna with a tertiary amide in luminescent Eu and Tb complexes dramatically increases the lanthanide emission quantum yields.

Investigating subtle 4f vs. 5f coordination differences using kinetically inert Eu(iii), Tb(iii), and Cm(iii) complexes of a coumarin-appended 1,4,7,10-tetraazacyclododecane-1,4,7-triacetate (DO3A) ligand

Coumarin appended DO3A complexes of Cm(iii), Eu(iii), and Tb(iii) show that more than ionic radius determines the coordination chemistry of the f-elements.

Rationalizing substituent effects in 1-azathioxanthone photophysics

The influence of an electron donating substituent on the photophysical properties of 1-azathioxanthone dyes has been investigated using optical spectroscopy and theoretical models. The motivation behind the study is based on the fact that thioxanthones are efficient triplet sensitizers, and thus promising sensitizers for lanthanide centered emission. By adding an aza group to one of the phenyl ring systems, direct coordination to a lanthanide center becomes possible, which makes azathoixanthones great candidates as antenna chromophores in lanthanide(III) based dyes. Here, three 1-azathioxanthone derivatives have been synthesized targeting efficient triplet formation following absorption in the visible range of the spectrum. This is achieved by adding methoxy groups to the 1-azathioxanthone core. The derivatives were characterized using absorption, emission, and time-gated emission spectroscopy, where fluorescent quantum yields, singlet and triplet excited states lifetimes were determined. The experimentally determined photophysical properties of the three 1-azathioxanthone compounds are contrasted to those of the parent thioxanthone and is rationalized using the Strickler-Berg equation, Hückel MO theory, and Dewar's rules in combination with computational chemistry. We find that the transition energies follow predictions, but that the overall photophysical properties are determined by the relative energies as well as the nature of the involved states in both the singlet and the triplet excited state manifolds.

Luminescent Tb(iii) and Sm(iii) complexes with a 1,4,7-triazacyclononane-based tris-aryloxide ligand for high-performance oxygen sensors

This paper presents (i) a high-performance Tb(iii)-based oxygen sensor (1^Tb/PS) and (ii) a lanthanide(iii)-based colorimetric luminescent oxygen sensor (1^TbSm/PS).

A ratiometric sensor for DNA based on a dual emission Ru(dppz) light-switch complex

Herein we describe the DNA binding properties of two new water-soluble ruthenium complexes; experimental and computational data reveal that both complexes display dual emission from MLCT and LLCT excited states.

Sensitisation of visible and NIR lanthanide emission by InPZnS quantum dots in bi-luminescent hybrids

The synthesis of stable hybrid nanoparticles combining InPZnS@ZnSe/ZnS quantum dots (QDs) and grafted lanthanide complexes has been performed using two different approaches in organic and aqueous media. The final bi-luminescent hybrids exhibit Ln(III) (Ln = Eu and Yb) centred luminescence upon QD excitation, suggesting that an energy transfer occurs from the QD to the lanthanide.