Tuning fluorocarbon adsorption in new isoreticular porous coordination frameworks for heat transformation applications

Engineered Nanoporous Frameworks for Adsorption Cooling Applications

The energy demand for traditional vapor-compressed technology for space cooling continues to soar year after year due to global warming and the increasing human population's need to improve living and working conditions. Thus, there is a growing demand for eco-friendly technologies that use sustainable or waste energy resources. This review discusses the properties of various refrigerants used for adsorption cooling applications followed by a brief discussion on the thermodynamic cycle. Next, sorbents traditionally used for cooling are reviewed to emphasize the need for advanced capture materials with superior properties to improve refrigerant sorption. The remainder of the review focus on studies using engineered nanoporous frameworks (ENFs) with various refrigerants for adsorption cooling applications. The effects of the various factors that play a role in ENF-refrigerant pair selection, including pore structure/dimension/shape, morphology, open-metal sites, pore chemistry and possible presence of defects, are reviewed. Next, in-depth insights into the sorbent-refrigerant interaction, and pore filling mechanism gained through a combination of characterization techniques and computational modeling are discussed. Finally, we outline the challenges and opportunities related to using ENFs for adsorption cooling applications and provide our views on the future of this technology.

Capture Fluorocarbon and Chlorofluorocarbon from Air Using DUT-67 for Safety and Semi-Quantitative Analysis

Fluoro- and chlorofluorocabons (FC/CFCs) are important refrigerants, solvents, and fluoropolymers in industry while being toxic and carrying high global warming potential. Detection and reclamation of FC/CFCs based on adsorption technology with highly selective adsorbents is important to labor safety and environmental protection. Herein, the study reports an integrated method to combine capture, separation, enrichment, and analysis of representative FC/CFCs (chlorodifluoromethane(R22) and 1,1,1,2-tetrafluoroethane (R134a)) by using the highly stable and porous Zr-MOF, DUT-67. Gas adsorption and breakthrough experiments demonstrate that DUT-67 has high R22/R134a uptake (124/116 cm3 g-1) and excellent R22/R134a/CO2 separation performance (IAST selectivities of R22/CO2 and R134a/CO2 ranging from 51.4 to 33.3, and 31.1 to 25.8), even in rather low concentration and humid conditions. A semi-quantitative analysis protocol is set up to analyze the low concentrations of R22/R134a based on the high selective R22/R134a adsorption ability, fast adsorption kinetics, water-resistant utility, facile regeneration, and excellent recyclability of DUT-67. In situ single-crystal X-ray diffraction, theoretical calculations, and in situ diffuse reflectance infrared Fourier transform spectra have been employed to understand the adsorption mechanism. This work may provide a potential adsorbent for purge and trap technique under room temperature, thus promoting the application of MOFs for VOCs sampling and quantitative analysis.

Non-CO2 greenhouse gas separation using advanced porous materials

Global warming has become a growing concern over decades, prompting numerous research endeavours to reduce the carbon dioxide (CO2) emission, the major greenhouse gas (GHG). However, the contribution of other non-CO2 GHGs including methane (CH4), nitrous oxide (N2O), fluorocarbons, perfluorinated gases, etc. should not be overlooked, due to their high global warming potential and environmental hazards. In order to reduce the emission of non-CO2 GHGs, advanced separation technologies with high efficiency and low energy consumption such as adsorptive separation or membrane separation are highly desirable. Advanced porous materials (APMs) including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), porous organic polymers (POPs), etc. have been developed to boost the adsorptive and membrane separation, due to their tunable pore structure and surface functionality. This review summarizes the progress of APM adsorbents and membranes for non-CO2 GHG separation. The material design and fabrication strategies, along with the molecular-level separation mechanisms are discussed. Besides, the state-of-the-art separation performance and challenges of various APM materials towards each type of non-CO2 GHG are analyzed, offering insightful guidance for future research. Moreover, practical industrial challenges and opportunities from the aspect of engineering are also discussed, to facilitate the industrial implementation of APMs for non-CO2 GHG separation.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

Advances in the adsorption of heavy metal ions in water by UiO-66 composites

The innovative adsorbents known as the Metal-organic Framework (MOFs) had a high specific surface area, various structural types, and good chemical stability. MOFs have been produced through hydrothermal, mechanochemical, microwave-assisted, gelation, and other synthesis methods, and the solvothermal process is one of them that researchers frequently utilize. The UiO materials have a more comprehensive application potential than different subtypes of MOFs among the numerous MOFs that have been synthesized. The synthesis of MOFs and their composites, as well as the adsorption characteristics of UiO materials in the adsorption of various heavy metal ions, have all been examined and summarized in this study.

Hybrid Coordination Networks for Removal of Pollutants from Wastewater

The adsorption properties of two coordination polymers, resulting from the reaction of divalent metal (Ca²⁺ or Co²⁺) salts with (2-carboxyethyl)(phenyl)phosphinic acid, are presented in this paper. The structural and textural characterization before and after adsorption experiments is presented. The adsorbent materials were prepared using the hydrothermal procedure. The compound Ca[O₂P(CH₂CH₂COOH)(C₆H₅)]₂ (CaCEPPA) has a layered topology, with the phenyl groups oriented into the interlayer space and crystallizes in the monoclinic system. Compound Co₂[(O₂P(CH₂CH₂COO)(C₆H₅)(H₂O)]₂·2H₂O (CoCEPPA) has a 1D structure composed of zig-zag chains. The adsorption performances of CaCEPPA and CoCEPPA materials were tested in the removal of cadmium and lead from aqueous solutions. The optimum pH of ions adsorption was found to be five for both adsorbent materials. Pseudo-first and second-order kinetic models were used for fitting kinetic experimental data, and Langmuir and Freundlich isotherms were used for modeling the equilibrium experimental data. The pseudo-second-order kinetic model and Langmuir isotherm best described the adsorption of Cd and Pb ions onto the studied materials, judging from the results of the error function (correlation coefficient, sum of square error, chi-square test, and average relative error) analysis. The studied materials present a higher affinity for Cd ions compared with the adsorption capacity developed for the removal of Pb ions from aqueous solutions. CoCEPPA showed the highest adsorption performance in the removal process of metal ions from aqueous solutions compared with CaCEPPA (q_m = 54.9 mg Cd²⁺/g of CoCEPPA, q_m = 36.5 mg Cd²⁺/g of CaCEPPA).

Manipulating Pore Topology and Functionality to Promote Fluorocarbon-Based Adsorption Cooling

ConspectusWith the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudocompression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus, increases in this working capacity directly translate to a more compact and efficient cooling system. However, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given the ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular-level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorbate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. This atomic level understanding of sorbate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we have made strides toward engineering designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.

Hydroxypropyl-β-cyclodextrin-polyurethane/graphene oxide magnetic nanoconjugates as effective adsorbent for chromium and lead ions

In this work, hydroxypropyl-β-cyclodextrin-polyurethane magnetic nanoconjugates/reduced graphene oxide (HPMNPU/GO) supramolecules were prepared. The adsorbent was characterized using FTIR and SEM. The adsorbent was evaluated for its efficiency to remove Cr⁶⁺ and Pb²⁺ from aqueous solutions through batch adsorption studies following a Definitive Screening Design (DSD). Effects of solution pH, contact time, adsorbent dosage, initial metal concentration, ionic strength, GO/NC ratio and temperature on Cr ⁶⁺ and Pb ²⁺ adsorption were investigated. Optimization of the adsorption process was done using a desirability function of the Design Expert V11 software. A good agreement between experimental and predicted data proved the efficiency of this model for prediction of real optimum point. The batch experiments implied that the pseudo-second-order model (lowest sum of square error (SSE) values and correlation coefficients (R²) > 0.999) was better to describe the adsorption kinetics of Cr⁶⁺ and Pb²⁺ onto the HPMNPU/GO.

Homocoupling Reactions of Azoles and Their Applications in Coordination Chemistry

Pyrazole, a member of the structural class of azoles, exhibits molecular properties of interest in pharmaceuticals and materials chemistry, owing to the two adjacent nitrogen atoms in the five-membered ring system. The weakly basic nitrogen atoms of deprotonated pyrazoles have been applied in coordination chemistry, particularly to access coordination polymers and metal-organic frameworks, and homocoupling reactions can in principle provide facile access to bipyrazole ligands. In this context, we summarize recent advances in homocoupling reactions of pyrazoles and other types of azoles (imidazoles, triazoles and tetrazoles) to highlight the utility of homocoupling reactions in synthesizing symmetric bi-heteroaryl systems compared with traditional synthesis. Metal-free reactions and transition-metal catalyzed homocoupling reactions are discussed with reaction mechanisms in detail.

A Flexible-Robust Copper(II) Metal-Organic Framework Constructed from a Fluorinated Ligand for CO2/R22 Capture

A flexible-robust copper(II) metal-organic framework, denoted as LIFM-100, has been successfully synthesized using a fluorinated linear dicarboxylate to link copper ions. LIFM-100 exhibits a breathing effect, which can transform reversibly between a large form (lp) and a narrow form (np) from single crystal to single crystal. In addition, LIFM-100 shows good thermal and chemical stability. By the introduction of trifluoromethyl functional groups and uncoordinated carboxyl acids, LIFM-100 features a good CO₂/R22 adsorption/separation performance at 298 K, showing potential in natural gas purification and CO₂/R22 capture.

Molecular Insight into Fluorocarbon Adsorption in Pore Expanded Metal-Organic Framework Analogs

The rapid growth in the global energy demand for space cooling requires the development of more efficient environmental chillers for which adsorption-based cooling systems can be utilized. Here, in this contribution, we explore sorbents for chiller use via a pore-engineering concept to construct analogs of the 1-dimensional pore metal-organic framework MOF-74 by using elongated organic linkers and stereochemistry control. The prepared pore-engineered MOFs show remarkable equilibrium adsorption of the selected fluorocarbon refrigerant that is translated to a modeled adsorption-based refrigeration cycle. To probe molecular level interactions at the origin of these unique adsorption properties for this series of Ni-MOFs, we combined in situ synchrotron X-ray powder diffraction, neutron powder diffraction, X-ray absorption spectroscopy, calorimetry, Fourier transform infrared techniques, and molecular simulations. Our results reveal the coordination of fluorine (of CH2F in R134a) to the nickel(II) open metal centers at low pressures for each Ni-MOF analog and provide insight into the pore filling mechanism for the full range of the adsorption isotherms. The newly designed Ni-TPM demonstrates exceptional R134a adsorption uptake compared to its parent microporous Ni-MOF-74 due to larger engineered pore size/volume. The application of this adsorption performance toward established chiller conditions yields a working capacity increase for Ni-TPM of about 400% from that of Ni-MOF-74, which combined with kinetics directly correlates to both a higher coefficient of performance and a higher average cooling capacity generated in a modeled chiller.

Hydrophobic Metal-Organic Frameworks: Assessment, Construction, and Diverse Applications

Tens of thousands of metal-organic frameworks (MOFs) have been developed in the past two decades, and only ≈100 of them have been demonstrated as porous and hydrophobic. These hydrophobic MOFs feature not only a rich structural variety, highly crystalline frameworks, and uniform micropores, but also a low affinity toward water and superior hydrolytic stability, which make them promising adsorbents for diverse applications, including humid CO2 capture, alcohol/water separation, pollutant removal from air or water, substrate-selective catalysis, energy storage, anticorrosion, and self-cleaning. Herein, the recent research advancements in hydrophobic MOFs are presented. The existing techniques for qualitatively or quantitatively assessing the hydrophobicity of MOFs are first introduced. The reported experimental methods for the preparation of hydrophobic MOFs are then categorized. The concept that hydrophobic MOFs normally synthesized from predesigned organic ligands can also be prepared by the postsynthetic modification of the internal pore surface and/or external crystal surface of hydrophilic or less hydrophobic MOFs is highlighted. Finally, an overview of the recent studies on hydrophobic MOFs for various applications is provided and suggests the high versatility of this unique class of materials for practical use as either adsorbents or nanomaterials.

Porous metal-organic frameworks for gas storage and separation: Status and challenges

Gases are widely used as energy resources for industry and our daily life. Developing energy cost efficient porous materials for gas storage and separation is of fundamentally and industrially important, and is one of the most important aspects of energy chemistry and materials. Metal-organic frameworks (MOFs), representing a novel class of porous materials, feature unique pore structure, such as exceptional porosity, tunable pore structures, ready functionalization, which not only enables high density energy storage of clean fuel gas in MOF adsorbents, but also facilitates distinct host-guest interactions and/or sieving effects to differentiate different molecules for energy-efficient separation economy. In this review, we summarize and highlight the recent advances in the arena of gas storage and separation using MOFs as adsorbents, including progresses in MOF-based membranes for gas separation, which could afford broader concepts to the current status and challenges in this field.

Highly efficient removal of Pb2+ by a sandwich structure of metal–organic framework/GO composite with enhanced stability

Sandwich-structured MIL-101(Fe)/GO was successfully synthesized by a one-step hydrothermal method, and exhibited a high adsorption capacity and fast adsorption kinetics.

Nanospace within metal-organic frameworks for gas storage and separation

Porous metal-organic frameworks (MOFs), also known as porous coordination polymers, represent a new class of porous materials, and one of their striking features lies in their tunable, designable, and functionalizable nanospace. This nanospace within MOFs provides virtually plenty of room for imagination, allowing designed incorporation of different size, shape, and functionalities for targeted gas storage and separation applications. Furthermore, the features of high porosities, tunable framework structures and pore sizes, and immobilized functional sites enable MOF materials to fully make use of their nanopore space for gas storage, to optimize their sieving effects, and to differentiate their interactions with gas molecules for gas separation. In this review article, we highlight some recent significant advances in developing microporous MOFs for some of the most important gas storage and separation applications.

Sensing and capture of toxic and hazardous gases and vapors by metal–organic frameworks

This review summaries recent progress in the luminescent detection and adsorptive removal of harmful gases and vapors by metal–organic frameworks, as well as the principles and strategies guiding the design of these materials.

Mesoporous Metal-Organic Frameworks with Exceptionally High Working Capacities for Adsorption Heat Transformation

Pore size is one of the most important parameters of adsorbents, and mesoporous materials have received intense attention for large guests. Here, a series of mesoporous coordination polymers underlying a new framework prototype for fast expansion of pore size is reported and the profound effect of pore size on adsorption heat transformation is demonstrated. Three isostructural honeycomb-like frameworks are designed and synthesized by combining ditopic linear metal oxalate chains and triangular tris-pyridine ligands. Changing the ligand bridging length from 5.5 to 8.6 and 9.9 Å gives rise to effective pore diameter from 20 to 33 and 37 Å, surface area from 2096 to 2630 and 2749 m² g^-1 , and pore volume from 1.19 to 1.93 and 2.36 cm³ g^-1 , respectively. By virtue of the unique and tunable isotherm shape of mesopores, exceptionally large working capacity up to 1.19 g g^-1 or 0.38 g cm^-3 for adsorption heat transformation can be achieved using R-134a (1,1,1,2-tetrafluroethane) as a working fluid.

A functionalized metal-organic framework decorated with O- groups showing excellent performance for lead(ii) removal from aqueous solution

A novel MOF decorated with O^– groups was elaborately constructed and showed excellent performance for Pb²⁺ removal.

Heavy metal ions are highly toxic and widely spread as environmental pollutants. New strategies are being developed to efficiently remove these toxic ions. Herein, we use the intrinsic advantages of metal–organic frameworks (MOFs) and develop a porous Zn(ii)-based MOF decorated with O^– groups for the removal of Pb²⁺. Benefiting from its multiple porosity, sufficient adsorption sites and strong affinity, the activated MOF material exhibits an ultrahigh Pb²⁺ uptake capacity (616.64 mg g^–1), surpassing all those of reported MOF adsorbents. Moreover, it can selectively capture Pb²⁺ with high efficiency (>99.27%) against background ions. Even in the presence of a high concentration of competitive ions, such as Ca²⁺ or Mg²⁺, effective removal (>99.21%) can also be achieved in a short time. The excellent removal performance demonstrates the strong electrostatic attraction and coordination interaction between the highly accessible O^– groups and Pb²⁺. The possible adsorption mechanism was systematically verified by zeta potential, FT-IR and XPS studies. Our work reveals the enormous potential of functionalized MOFs as an appealing platform to construct sorbent materials.

Separation of C2/C1 hydrocarbons through a gate-opening effect in a microporous metal–organic framework

Here we report highly selective C2 separation from methane in a porous metal–organic framework.

Stepwise engineering of pore environments and enhancement of CO2/R22 adsorption capacity through dynamic spacer installation and functionality modification

Stepwise dynamic spacer installation and post-synthetic covalent modifications are combined to fine tune the gas adsorption properties MOFs.

Nontoxic and renewable metal–organic framework based on α-cyclodextrin with efficient drug delivery

Two new nontoxic α-CD based compounds were synthesized by different method, which contain different left-handed helix and exhibit efficient drug loading capacity and sustained release behaviors.

Alkyl group-directed assembly of coordination polymers based on bis-(4-imidazol-1-yl-phenyl)-amine and their photocatalytic properties

Four new coordination polymers have been solvothermally synthesized to explore their diverse networks and photocatalytic properties.

Three Zn(ii)/Cd(ii)/Mn(ii) coordination polymers based on a 2-hydroxy-N-(1H-tetrazol-5-yl) benzamide ligand: structures, and magnetic and photoluminescence properties

Three transition metal complexes of the amide decorated tetrazolate are reported that include an interdigitated 3-D structure with 1-D channels.

Tuning oxygen-sensing behaviour of a porous coordination framework by a guest fluorophore

A new oxygen-sensing material with desirable excitation/emission characteristics was achieved by using a simple guest fluorophore.