Fabrication of fibrillized collagen microspheres with the microstructure resembling an extracellular matrix

Novel hemoperfusion adsorbents based on collagen for efficient bilirubin removal - A thought from yellow skin of patients with hyperbilirubinemia

Hemoperfusion is a well-developed method for removing bilirubin from patients with hyperbilirubinemia. The performance of adsorbents is crucial during the process. However, most adsorbents used for bilirubin removal are not suitable for clinical applications, because they either have poor adsorption performance or limited biocompatibility. Patients with hyperbilirubinemia usually have distinctive yellow skin, indicating that collagen, a primary component of the skin, may be an effective material for absorbing bilirubin from the blood. Based on this idea, we designed and synthesized collagen (Col) and collagen-polyethyleneimine (Col-PEI) microspheres and employed them as hemoperfusion adsorbents for bilirubin removal. The microspheres have an efficient adsorption rate, higher bilirubin adsorption capacity, and competitive adsorption of bilirubin in the bilirubin/bovine serum albumin (BSA) solution. The maximum adsorption capacities of Col and Col-PEI microspheres for bilirubin are 150.2 mg/g and 258.4 mg/g, respectively, which are higher than those of most traditional polymer microspheres. Additionally, the microspheres exhibit excellent blood compatibility originating from collagen. Our study provides a new collagen-based strategy for the hemoperfusion treatment of hyperbilirubinemia.

Adipose-Derived Stem Cells in Reinforced Collagen Gel: A Comparison between Two Approaches to Differentiation towards Smooth Muscle Cells

Scaffolds made of degradable polymers, such as collagen, polyesters or polysaccharides, are promising matrices for fabrication of bioartificial vascular grafts or patches. In this study, collagen isolated from porcine skin was processed into a gel, reinforced with collagen particles and with incorporated adipose tissue-derived stem cells (ASCs). The cell-material constructs were then incubated in a DMEM medium with 2% of FS (DMEM_part), with added polyvinylalcohol nanofibers (PVA_part sample), and for ASCs differentiation towards smooth muscle cells (SMCs), the medium was supplemented either with human platelet lysate released from PVA nanofibers (PVA_PL_part) or with TGF-β1 + BMP-4 (TGF + BMP_part). The constructs were further endothelialised with human umbilical vein endothelial cells (ECs). The immunofluorescence staining of alpha-actin and calponin, and von Willebrand factor, was performed. The proteins involved in cell differentiation, the extracellular matrix (ECM) proteins, and ECM remodelling proteins were evaluated by mass spectrometry on day 12 of culture. Mechanical properties of the gels with ASCs were measured via an unconfined compression test on day 5. Gels evinced limited planar shrinkage, but it was higher in endothelialised TGF + BMP_part gel. Both PVA_PL_part samples and TGF + BMP_part samples supported ASC growth and differentiation towards SMCs, but only PVA_PL_part supported homogeneous endothelialisation. Young modulus of elasticity increased in all samples compared to day 0, and PVA_PL_part gel evinced a slightly higher ratio of elastic energy. The results suggest that PVA_PL_part collagen construct has the highest potential to remodel into a functional vascular wall.

Construction of Unsaturated Collagen Microsphere System Based on Hydrogen/Coordination Bond and Application

In this paper, unsaturated collagen microspheres (CMA-Cr/ST) were constructed from vinyl collagen (CMA, which is from leather solid waste) and chromium/synthetic tannins (Cr/ST) through hydrogen and coordination bonds and grafted on polyamide nonwoven fiber by thiol-ene click chemistry to improve the moisture absorption and permeability of nonwoven. The results showed that when the quality ratio of CMA to Cr/ST was 1:1, the magnetic stirring time was 20 min with 250 rpm at room temperature, the surface and particle size distribution of the obtained microspheres were smooth and relatively uniform, and the average particle size was 2-3 μm. When the concentrations of the microspheres and the initiators were 6 and 0.006 wt %, the irradiation time was 4 h and the grafting rate of CMA-Cr/ST on the surface of polyamide fibers would reach 31.3%. The moisture absorption and permeability of the obtained microsphere-modified polyamide nonwoven fiber (CMA-Cr/ST-S-PA) were increased. It was found that the collagen microspheres were firmly modified on the polyamide fibers by moisture and heat resistance, wash resistance, and solvent resistance studies.

Formation of 3D tissues of primary hepatocytes using fibrillized collagen microparticles as intercellular binders

Numerous attempts have been made to organize isolated primary hepatocytes into functional three-dimensional (3D) constructs, but technologies to introduce extracellular matrix (ECM) components into such assemblies have not been fully developed. Here we report a new approach to forming hepatocyte-based 3D tissues using fibrillized collagen microparticles (F-CMPs) as intercellular binders. We created thick tissues with a thickness of ∼200 μm simply by mixing F-CMPs with isolated primary rat hepatocytes and culturing them in cell culture inserts. Owing to the incorporated F-CMPs, the circular morphology of the formed tissues was stabilized, which was strong enough to be manually manipulated and retrieved from the chamber of the insert. We confirmed that the F-CMPs dramatically improved the cell viability and hepatocyte-specific functions such as albumin production and urea synthesis in the formed tissues. The presented approach provides a versatile strategy for hepatocyte-based tissue engineering, and will have a significant impact on biomedical applications and pharmaceutical research.

Formation of Microcages from a Collagen Mimetic Peptide via Metal-Ligand Interactions

Here, the hierarchical assembly of a collagen mimetic peptide (CMP) displaying four bipyridine moieties is described. The CMP was capable of forming triple helices followed by self-assembly into disks and domes. Treatment of these disks and domes with metal ions such as Fe(II), Cu(II), Zn(II), Co(II), and Ru(III) triggered the formation of microcages, and micron-sized cup-like structures. Mechanistic studies suggest that the formation of the microcages proceeds from the disks and domes in a metal-dependent fashion. Fluorescently-labeled dextrans were encapsulated within the cages and displayed a time-dependent release using thermal conditions.

Collagen-based scaffolds: An auspicious tool to support repair, recovery, and regeneration post spinal cord injury

Spinal cord injury (SCI) is a perplexing traumatic disease that habitually gives ride to permanent disability, motor, and sensory impairment. Despite the existence of several therapeutic approaches for the injured motor or sensory neurons, they can't promote axonal regeneration. Whether prepared by conventional or rapid prototyping techniques, scaffolds can be applied to refurbish the continuity of the injured site, by creating a suitable environment for tissue repair, axonal regeneration, and vascularization. Collagen is a multi-sourced protein, found in animals skin, tendons, cartilage, bones, and human placenta, in addition to marine biomass. Collagen is highly abundant in the extracellular matrix and is known for its biocompatibility, biodegradability, porous structure, good permeability, low immunogenicity and thus is extensively applied in the pharmaceutical, cosmetic, and food industries as well as the tissue engineering field. Collagen in scaffolds is usually functionalized with different ligands and factors such as, stem cells, embryonic or human cells to augment its binding specificity and activity. The review summarizes the significance of collagen-based scaffolds and their influence on regeneration, repair and recovery of spinal cord injuries.

A novel crosslinker-free technique toward the fabrication of collagen microspheres

Injectable collagen microspheres (CMs) have the potential to be an excellent tool to deliver various modulatory agents or to be used as a cellular transporter. A drawback has been the difficulty in producing reliable and spherical CMs. A crosslinker-free method to fabricate CMs was developed using liquid collagen (LC) in a water-in-oil emulsion process with varying concentrations of surfactant span-80. Different emulsion times of up to 16-hr were utilized to produce the CMs. Visual microscopy and scanning electron microscopy were utilized to determine the morphology of the CMs. To determine the fibril nature of the CMs, focus ion beam milling, energy dispersive spectroscopy, and Fourier Transformation-Infrared spectroscopy were performed. A cell biocompatibility study was performed to assess the biocompatibility of the CMs. The results demonstrated that consistent spherical CMs were achievable by changing the span-80 concentration. The CMs were fibrilized not only at the surface, but also at the core. Both the 1- and 16-hr emulsion time demonstrated biocompatibility and it appeared that the cells preferentially adhered to the CMs. This crosslinker-free method to fabricate CMs resulted in spherical, stable, biocompatible CMs, and could be an excellent technique for multiple tissue engineering applications.

Novel Self-Assembly-Induced Gelation for Nanofibrous Collagen/Hydroxyapatite Composite Microspheres

This study demonstrates the utility of the newly developed self-assembly-induced gelation technique for the synthesis of porous collagen/hydroxyapatite (HA) composite microspheres with a nanofibrous structure. This new approach can produce microspheres of a uniform size using the droplets that form at the nozzle tip before gelation. These microspheres can have a highly nanofibrous structure due to the immersion of the droplets in a coagulation bath (water/acetone), in which the collagen aggregates in the solution can self-assemble into fibrils due to pH-dependent precipitation. Bioactive HA particles were incorporated into the collagen solutions, in order to enhance the bioactivity of the composite microspheres. The composite microspheres exhibited a well-defined spherical morphology and a uniform size for all levels of HA content (0 wt %, 10 wt %, 15 wt %, and 20 wt %). Collagen nanofibers-several tens of nanometers in size-were uniformly present throughout the microspheres and the HA particles were also well dispersed. The in vitro apatite-forming ability, assessed using the simulated body fluid (SBF) solution, increased significantly with the incorporation of HA into the composite microspheres.