2D protein arrays induce 3D in vivo-like assemblies of cells

A Microfluidic Multisize Spheroid Array for Multiparametric Screening of Anticancer Drugs and Blood-Brain Barrier Transport Properties

Physiological-relevant in vitro tissue models with their promise of better predictability have the potential to improve drug screening outcomes in preclinical studies. Despite the advances of spheroid models in pharmaceutical screening applications, variations in spheroid size and consequential altered cell responses often lead to nonreproducible and unpredictable results. Here, a microfluidic multisize spheroid array is established and characterized using liver, lung, colon, and skin cells as well as a triple-culture model of the blood-brain barrier (BBB) to assess the effects of spheroid size on (a) anticancer drug toxicity and (b) compound penetration across an advanced BBB model. The reproducible on-chip generation of 360 spheroids of five dimensions on a well-plate format using an integrated microlens technology is demonstrated. While spheroid size-related IC50 values vary up to 160% using the anticancer drugs cisplatin (CIS) or doxorubicin (DOX), reduced CIS:DOX drug dose combinations eliminate all lung microtumors independent of their sizes. A further application includes optimizing cell seeding ratios and size-dependent compound uptake studies in a perfused BBB model. Generally, smaller BBB-spheroids reveal an 80% higher compound penetration than larger spheroids while verifying the BBB opening effect of mannitol and a spheroid size-related modulation on paracellular transport properties.

Monitoring tissue-level remodelling during inflammatory arthritis using a three-dimensional synovium-on-a-chip with non-invasive light scattering biosensing

Rheumatoid arthritis is a chronic, systemic joint disease in which an autoimmune response translates into an inflammatory attack resulting in joint damage, disability and decreased quality of life. Despite recent introduction of therapeutic agents such as anti-TNFα, even the best current therapies fail to achieve disease remission in most arthritis patients. Therefore, research into the mechanisms governing the destructive inflammatory process in rheumatoid arthritis is of great importance and may reveal novel strategies for the therapeutic interventions. To gain deeper insight into its pathogensis, we have developed for the first time a three-dimensional synovium-on-a-chip system in order to monitor the onset and progression of inflammatory synovial tissue responses. In our study, patient-derived primary synovial organoids are cultivated on a single chip platform containing embedded organic-photodetector arrays for over a week in the absence and presence of tumor-necrosis-factor. Using a label-free and non-invasive optical light-scatter biosensing strategy inflammation-induced 3D tissue-level architectural changes were already detected after two days. We demonstrate that the integration of complex human synovial organ cultures in a lab-on-a-chip provides reproducible and reliable information on how systemic stress factors affect synovial tissue architectures.

Single-Cell Probe Force Studies to Identify Sox2 Overexpression-Promoted Cell Adhesion in MCF7 Breast Cancer Cells

The replacement of the cantilever tip by a living cell in Atomic Force Microscopy (AFM) experiments permits the direct quantification of cell-substrate and cell-cell adhesion forces. This single-cell probe force measurement technique, when complemented by microscopy, allows controlled manipulation of the cell with defined location at the area of interest. In this work, a setup based on two glass half-slides, a non-fouling one with bacterial S-layer protein SbpA from L. sphaericus CMM 2177 and the second with a fibronectin layer, has been employed to measure the adhesion of MCF7 breast cancer cells to fibronectin films (using SbpA as control) and to other cells (symmetric vs. asymmetric systems). The measurements aimed to characterize and compare the adhesion capacities of parental cells and cells overexpressing the embryonic transcription factor Sox2, which have a higher capacity for invasion and are more resistant to endocrine therapy in vivo. Together with the use of fluorescence techniques (epifluorescence, Total Internal Fluorescence Microscopy (TIRF)), the visualization of vinculin and actin distribution in cells in contact with fibronectin surfaces is enabled, facilitating the monitoring and quantification of the formation of adhesion complexes. These findings demonstrate the strength of this combined approach to assess and compare the adhesion properties of cell lines and to illustrate the heterogeneity of adhesive strength found in breast cancer cells.

Effect of Spheroidal Age on Sorafenib Diffusivity and Toxicity in a 3D HepG2 Spheroid Model

The enhanced predictive power of 3D multi-cellular spheroids in comparison to conventional monolayer cultures makes them a promising drug screening tool. However, clinical translation for pharmacology and toxicology is lagging its technological progression. Even though spheroids show a biological complexity resembling native tissue, standardization and validation of drug screening protocols are influenced by continuously changing physiological parameters during spheroid formation. Such cellular heterogeneities impede the comparability of drug efficacy studies and toxicological screenings. In this paper, we demonstrated that aside from already well-established physiological parameters, spheroidal age is an additional critical parameter that impacts drug diffusivity and toxicity in 3D cell culture models. HepG2 spheroids were generated and maintained on a self-assembled ultra-low attachment nanobiointerface and characterized regarding time-dependent changes in morphology, functionality as well as anti-cancer drug resistance. We demonstrated that spheroidal aging directly influences drug response due to the evolution of spheroid micro-structure and organo-typic functions, that alter inward diffusion, thus drug uptake.

A Self-Assembled Antifouling Nano-Biointerface for the Generation of Spheroids

Several techniques have been established over the last decades to produce three-dimensional (3D) cellular spheroids and each method has its advantages and limitations. The unique self-assembly properties of surface layer (S-layer) proteins have already been applied to a broad range of life science applications. The bacterial S-layer protein SbpA displays a strong antifouling behavior when recrystallized on planar surfaces and offers the opportunity to induce 3D cell aggregation. In this chapter, an S-layer nanointerface is presented as novel ultralow attachment material for the formation of functional spheroids of reproducible sizes. The system is compatible with standard microwell plates and enables long-term 3D cell culture and in situ monitoring of cellular viability. Moreover, this facile and stable biointerface has potential for use in toxicity screening assays and represents an alternative to conventional materials like polyethylene glycol (PEG), agarose, or hydrogel surfaces.

Life under Continuous Streaming: Recrystallization of Low Concentrations of Bacterial SbpA in Dynamic Flow Conditions

The well-known bacterial S-layer protein SbpA from Lysinibacillus sphaericus CCM2177 induces spontaneous crystal formation via cooperative self-assembly of the protein subunits into an ordered supramolecular structure. Recrystallization occurs in the presence of divalent cations (i.e., Ca2+) and finally leads to producing smooth 2-D crystalline coatings composed of squared (p4) lattice structures. Among the factors interfering in such a process, the rate of protein supply certainly plays an important role since a limited number of accessible proteins might turn detrimental for film completion. Studies so far have mostly focused on high SbpA concentrations provided under stopped-flow or dynamic-flow conditions, thus omitting the possibility of investigating intermediate states, in which dynamic flow is applied for more critical concentrations of SbpA (i.e., 25, 10, and 5 µg/mL). In this work, we have characterized both physico-chemical and topographical aspects of the assembly and recrystallization of SbpA protein in such low concentration conditions by means of in situ Quartz Crystal Microbalance with Dissipation (QCMD) and atomic force microscopy (AFM) measurements, respectively. On the basis of these experiments, we can confirm how the application of a dynamic flow influences the formation of a closed and crystalline protein film from low protein concentrations (i.e., 10 µg/mL), which otherwise would not be formed.

Novel biodegradable and non-fouling systems for controlled-release based on poly(ε-caprolactone)/Quercetin blends and biomimetic bacterial S-layer coatings

Quercetin is a strong antioxidant with low bioavailability due to its high crystallinity. A further drawback is that Quercetin has potentially toxic effects at high concentrations. To improve this low water solubility, as well as control the concentration of the flavonoid in the body, Quercetin is incorporated into a polymeric matrix to form an amorphous solid dispersion (ASD) stable enough to resist the recrystallization of the drug. For this purpose, miscible poly(ε-caprolactone) (PCL) and Quercetin (Q) blends are prepared, provided that they have complementary interacting groups. For compositions in which the flavonoid remains in an amorphous state thanks to the interactions with polymer chains, various PCL/Q drug release platforms are fabricated: micrometric films by solvent casting, nanometric films by spin coating, and nanofibers by electrospinning. Then, the potential use of bacterial S-layer proteins as release-preventive membranes is tested on PCL–Quercetin blends, due to their ability to construct a biomimetic coating including nanometric pores. For all the platforms, the SbpA coating can maintain a stable release under the toxicity level of Quercetin. Accordingly, a PCL/Q system with an S-layer coating allows the design of versatile bioavailable Quercetin eluting devices that prevent toxicity and biofouling issues.

S-Layer coating on PCL–Quercetin miscible blends acts as a release controller from films and scaffolds, as well as antifouling agent.

Optimized alamarBlue assay protocol for drug dose-response determination of 3D tumor spheroids

The assessment of drug-dose responses is vital for the prediction of unwanted toxicological effects in modern medicine. Three-dimensional (3D) cell cultures techniques can provide in vivo-like spheroids and microtissues that resemble natural tumor function. However, formation of necrotic core and diffusion limitation of chemical compounds within these models can reduce the reproducibility and precision of standard bioassay protocols used to test two-dimensional (2D) cell cultures. Nonetheless, the accurate prediction of detrimental effects of test compounds based on functional bioassays is essential for the development of new efficient therapeutic strategies. For instance, alamarBlue^® is a widely-used commercially available redox indicator dye that can evaluate metabolic activity and cellular health status in a single-step procedure however, suitability and optimization of this bioassay must be determined for each individual application scenario. Here, we optimized the standard alamarBlue^® proliferation/viability protocol for tumor spheroid cultures to enhance assay precision during toxicological drug screening. We optimized the original protocol of alamarBlue^® assay that usually suggests an incubation time of 2-4 hours. The key modifications of the protocol for spheroid cultures are as follows: •Aspiration of cell culture medium before drug exposure.•Replacement of drug-supplemented medium with 10% (v/v) alamarBlue^® reagent mixed with culture medium.•Increase of incubation period to 24 h at 37 °C protected from light.

Development of a Multifunctional Nanobiointerface Based on Self-Assembled Fusion-Protein rSbpA/ZZ for Blood Cell Enrichment and Phenotyping

We present a multifunctional nanobiointerface for blood cell capture and phenotyping applications that features both excellent antifouling properties and high antibody activity. Multifunctionality is accomplished by modifying polymeric materials using self-assembled S-layer fusion-protein rSbpA/ZZ to immobilize high density antibodies at the two protein A binding sites of the rSbpA/ZZ nanolattice structure. Controlled orientation and alignment of the antibodies reduced antibody consumption 100-fold and increased cell capture efficiency 4-fold over standard methodologies. Cell analysis in complex samples was made possible by the remarkable antifouling properties of the rSbpA domain, while at the same time reducing unspecific binding and forgoing tedious blocking procedures. An automated microfluidic in situ cell analysis platform for isolation and phenotyping of primary peripheral blood mononuclear cells was developed as practical application. Results obtained using our automated microfluidic cell analysis platform showed that the multifunctional nanobiointerface can discriminate among T helper and cytotoxic T cells, and thymocytes. Additionally, on-chip cell capture under flow conditions using a high affinity CD 3 selective nanobiointerface preferentially isolated cells with strong surface marker expression. This means that our dynamic microfluidic cell purification method allows the enrichment of 773 CD 8 positive cytotoxic T cells out of a total blood cell population of 7728 PBMCs, which is an increase in cell enrichment of 8-fold with a purity of 85%.