Layer-by-Layer Fabrication of PAH/PAMAM/Nano-CaCO3 Composite Films and Characterization for Enhanced Biocompatibility

Nanoparticle production and functionalization for various biomedical uses are still challenging. Polymer composites constituted of poly(amidoamine) (PAMAM), polyallylamine hydrochloride (PAH), and calcium carbonate (CaCO₃) nanoparticles have good biocompatibility with physiological tissue and fluids, making them excellent candidates for biomedical applications. This study investigated the characteristics of polymeric/nano-CaCO₃ composite films based on a PAH/PAMAM matrix, which were fabricated through layer-by-layer synthesis on quartz glass substrates. It was found that the as-prepared elastic moduli of the resultant (PAH/PAMAM)_n-CaCO₃ (where n represents the number of bilayers) composite films varied from 1.40 to 23.70 GPa for different degrees of cross-linking when 0.1 M nano-CaCO₃ particles were incorporated into the polymer matrix. The highly cross-linked (PAH/PAMAM)₁₅-CaCO₃ composite film had the highest recorded elastic modulus of 23.70 GPa, while it was observed that for all the composite films fabricated for the present study, the addition of the nano-CaCO₃ particles approximately doubled the elastic modulus regardless of the degree of polymerization. Live/Dead assays were used to determine whether the produced composite films were compatible with human lung fibroblast cells. The findings indicate that the (PAH/PAMAM)_7.5-CaCO₃ composite film had the most positive effect on cell growth and proliferation, with the (PAH/PAMAM)₁₅-CaCO₃ composite film demonstrating significant ion transport behavior with low impedance, which was considered good for in vivo rapid cell-to-cell communication. Therefore, the (PAH/PAMAM)_7.5-CaCO₃ and (PAH/PAMAM)₁₅-CaCO₃ composite films are potential tissue engineering biomaterials, but further studies are essential to generate more data to evaluate the suitability of these composites for this and other biomedical functions.

Fabrication of Durable Superhydrophobic Surface for Versatile Oil/Water Separation Based on HDTMS Modified PPy/ZnO

Superhydrophobic materials have been widely applied in rapid removal and collection of oils from oil/water mixtures for increasing damage to environment and human beings caused by oil-contaminated wastewater and oil spills. Herein, superhydrophobic materials were fabricated by a novel polypyrrole (PPy)/ZnO coating followed by hexadecyltrimethoxysilane (HDTMS) modification for versatile oil/water separation with high environmental and excellent reusability. The prepared superhydrophobic surfaces exhibited water contact angle (WCA) greater than 150° and SA less than 5°. The superhydrophobic fabric could be applied for separation of heavy oil or light oil/water mixtures and emulsions with the separation efficiencies above 98%. The coated fabric also realized highly efficient separation with harsh environmental solutions, such as acid, alkali, salt, and hot water. The superhydrophobic fabric still remained, even after 80 cycles of separation and 12 months of storage in air, proving excellent durability. These novel superhydrophobic materials have indicated great development potentials for oil/water separation in practical applications.

Supramolecular dendrimer-containing layer-by-layer nanoassemblies for bioapplications: current status and future prospects

This review provides a comprehensive and critical overview of the supramolecular dendrimer-containing multifunctional layer-by-layer nanoassemblies driven by a multitude of intermolecular interactions for biological and biomedical applications.

Rapid Processing of Bottlebrush Coatings through UV-Induced Cross-Linking

Bottlebrush polymers can be used to introduce novel surface properties including hydrophilicity, stimuli-responsiveness, and reduced friction forces. However, simple, general, and efficient approaches to cross-linking bottlebrush polymer films and coatings are limited. Here, we report that bottlebrush polymers with an unsaturated polynorbornene backbone and thiol-terminated side chains can be cross-linked on demand by UV irradiation to produce uniform and insoluble bottlebrush polymer coatings. To quantify the kinetics and efficiency of cross-linking by UV exposure (254 nm), we measured the normalized residual thickness (NRT) of bottlebrush and linear polymer films after UV exposure and solvent washing. For bottlebrush polymers with thiol-terminated polystyrene (PS) side chains, the NRT exceeded 60% for a UV dose of 1.0 J/cm², while unfunctionalized linear PS required a dose of 7.9 J/cm² to achieve similar NRT values. Rapid UV-induced cross-linking of the bottlebrush PS was attributed to the thiol-ene coupling of the thiol-terminated side chains with the unsaturated polynorbornene backbones, as demonstrated through FTIR measurements and control studies involving bottlebrush polymers with saturated backbones. To establish the broader applicability of this approach, UV-induced cross-linking was demonstrated for thin films of bottlebrush polymers with thiol-terminated poly(methyl acrylate) (BB-PMMA-SH) side chains and those with poly(ethylene glycol) (BB-PEG) and poly(lactic acid) (BB-PLA) side chains which do not contain thiol end groups. UV-induced cross-linking of BB-PEG and BB-PLA films required the use of a multifunctional thiol additive. Finally, we demonstrated that bottlebrush polymer multilayers can be fabricated through sequential deposition and UV-induced cross-linking of different bottlebrush polymer chemistries. The cross-linking process outlined in this work is simple, general, and efficient and produces solvent-resistant coatings that preserve the unique properties and functions of bottlebrush polymers.

Hybrids of Polymer Multilayers, Lipids, and Nanoparticles: Mimicking the Cellular Microenvironment

Here we address research directions and trends developed following novel concepts in 2D/3D self-assembled polymer structures established in the department led by Helmuth Möhwald. These functional structures made of hybrids of polymer multilayers, lipids, and nanoparticles stimulated research in the design of the cellular microenvironment. The composition of the extracellular matrix (ECM) and dynamics of biofactor presentation in the ECM can be recapitulated by the hybrids. Proteins serve as models for protein-based biofactors such as growth factors, cytokines, hormones, and so forth. A fundamental understanding of complex intermolecular interactions and approaches developed for the externally IR-light-triggered release offers a powerful tool for controlling the biofactor presentation. Pure protein beads made via a mild templating on vaterite CaCO₃ crystals can mimic cellular organelles in terms of the compartmentalization of active proteins. We believe that an integration of the approaches developed and described here offers a strong tool for engineering and mimicking both extra- and intracellular microenvironments.

A New Way to Promote Molecular Drug Release during Medical Treatment: A Polyelectrolyte Matrix on a Piezoelectric-Dielectric Energy Conversion Substrate

Enhanced drug releases in a timely manner during urgent medical treatments would significantly enhance the prognosis of patients. Inspired by the facilitated molecular transports by the potentials, an enhanced drug release strategy driven by mechanical disturbances that widely exist in medical treatment processes is proposed. This strategy is enabled by a functional material comprised of multilayers of dendrimers as the drug reservoir, which are built on a piezoelectric-dielectric flexible film with reduced graphene oxide fillers. The generated voltages are higher and last longer than that in regular piezoelectric films. Photochemical crosslinking leads to a stable drug matrix which is even sustained in electric fields and high ionic strengths. The device enhances releases of positively, negatively, and zwitterionically charged molecules in response to mechanical stimuli and supports high cell viabilities. An illustrative application is demonstrated by preparing the material on the surface of a gastric lavage tube. The results show that the release of antiemetic drug increased by 200% within 60 min in response to forces mimicking human swallowing. This study contributes an integrative material that can realize electrically triggered releases that are previously only realized using complicated electrochemical setups. It is believed that this material can facilitate medicine applications in various emergent situations.

Layer-by-layer Polyelectrolytes Coating of Alginate Microgels for Sustained Release of Sodium Benzoate and Zosteric Acid

The potential of sustaining release of very small (Mw < 250 g/mol) hydrophilic drugs up to several days from layer-by-layer (LbL) polyelectrolyte coated alginate microgels (Alg-Ms) was investigated. One purpose is to minimize post-surgical adhesions, which develop in 12 h to 3 days after surgery. The LbL polyelectrolyte layer would serve as a diffusion barrier for their release. The LbL polyelectrolyte bilayers were prepared using poly(allylamine) (PAH) and poly(styrene sulfonate) (PSS). Sodium benzoate (NaB, Mw = 144 g/mol) and zosteric acid (ZA, Mw = 244 g/mol), two anti-inflammatory and anti-microbial compounds, were used as model drugs. A higher number of PAH/PSS bilayer lead to a greater sustained release of both drugs, and with 4 bilayers, the release of NaB and ZA was prolonged from 24 h to 72 h and 120 h, respectively. Fitting the data to the Ritger-Peppas' equation showed that as the bilayer number increased, the release constant and/or exponent decreased, indicating the LbL PAH/PSS bilayer effectively reduced the permeability of these two very small hydrophilic drugs. The ability to prolong the release of such small hydrophilic molecules, which has rarely been investigated previously, would find broad applications in fields such as anti-adhesion treatment and antifouling coatings.

Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications

Covalent layer-by-layer (LbL) assembly is a powerful method used to construct functional ultrathin films that enables nanoscopic structural precision, componential diversity, and flexible design. Compared with conventional LbL films built using multiple noncovalent interactions, LbL films prepared using covalent crosslinking offer the following distinctive characteristics: (i) enhanced film endurance or rigidity; (ii) improved componential diversity when uncharged species or small molecules are stably built into the films by forming covalent bonds; and (iii) increased structural diversity when covalent crosslinking is employed in componential, spacial, or temporal (labile bonds) selective manners. In this review, we document the chemical methods used to build covalent LbL films as well as the film properties and applications achievable using various film design strategies. We expect to translate the achievement in the discipline of chemistry (film-building methods) into readily available techniques for materials engineers and thus provide diverse functional material design protocols to address the energy, biomedical, and environmental challenges faced by the entire scientific community.

Controlled Interfacial Permeation, Nanostructure Formation, Catalytic Efficiency, Signal Enhancement Capability, and Cell Spreading by Adjusting Photochemical Cross-Linking Degrees of Layer-by-Layer Films

Interfacial properties including permeation, catalytic efficiency, Raman signal enhancement capabilities, and cell spreading efficiencies are important features that determine material functionality and applications. Here, we propose a facile method to adjust the above-mentioned properties by controlling the cross-linking degrees of multilayer using a photoactive molecule. After treating the cross-linked films in basic solutions, films with different cross-linking degrees presented varying residue thicknesses and film morphologies. As a result, these different films possessed distinct molecular loading and release characteristics. In addition, gold nanoparticles (AuNPs) of different morphological traits were generated by redox reactions coupled with diffusion within these films. The AuNP-polyelectrolyte obtained from the polyelectrolyte films of the medium cross-linking degrees displayed the highest catalytic efficiency and signal enhancement capabilities. Furthermore, cells responded to the variation of film cross-linking degrees, and on the films with the highest cross-linking degree, cells adhered with the highest speed. We expect this report to provide a general interfacial material engineering strategy for material designs.

Using a biocompatible diazidecrosslinker to fabricate a robust polyelectrolyte multilayer film with enhanced effects on cell proliferation

Due to the noncovalent interactions between the layers of polyelectrolyte films, the layer-by-layer assembled multilayered films always face the challenge of low film stiffness and chemical stability under extreme conditions. To handle this issue, we incorporated 4,4'-diazostilbene-2,2'-disulfonic acid disodium salt (DAS) as a crosslinker and subsequently photocrosslinked the layers of a poly(allylamine hydrochloride)/catalase multilayered film. The results showed that DAS could stabilize the prepared film in a manner similar to the traditional cross-linker glutaraldehyde. The multilayered film showed good biocompatibility with a positive effect on cell proliferation. Therefore, by using the commercially available DAS crosslinker, we provide a synthesis-free and biocompatible method to stabilize polyelectrolyte multilayers for broad and significant applications in biological fields, e.g., varying crosslinking density to adjust the mechanical strength of biomaterials, stabilizing susceptible biofilms, or introducing functional groups onto cell membranes.

Free-standing few-layered graphene oxide films: selective, steady and lasting permeation of organic molecules with adjustable speeds

A variety of small molecules with diameters around 1 nm possess a range of functions, such as antibiotic, antimicrobic, anticoagulant, pesticidal and chemotherapy effects, making these molecules especially useful in various applications ranging from medical treatment to environmental microbiological control. However, the long-term steady delivery (release or permeation) of these small molecules with adjustable and controllable speeds has remained an especially challenging task. In this study, we prepared covalently cross-linked free-standing few-layered GO films using a layer-by-layer technique in combination with photochemical cross-linkages, and achieved a controlled release of positively charged, negatively charged, and zwitterionic small molecules with adjustable and controllable speeds. The steady delivery of the small molecule lasted up to 9 days. Other functionalities, such as graphene-enhanced Raman spectra and electrochemical properties that could also be integrated or employed in delivery systems, were also studied for our films. We expect the special molecular delivery properties of our films to lead to new possibilities in drug/fertilizer delivery and environmental microbiological control applications.

Introducing a high gravity field to enhance infiltration of small molecules into polyelectrolyte multilayers

Loading functional small molecules into nano-thin films is fundamental to various research fields such as membrane separation, molecular imprinting, interfacial reaction, drug delivery etc. Currently, a general demand for enhancing the loading rate without affecting the film structures exists in most infiltration phenomena. To handle this issue, we have introduced a process intensification method of a high gravity technique, which is a versatile energy form of mechanical field well-established in industry, into the investigations on diffusion/infiltration at the molecular level. By taking a polyelectrolyte multilayer as a model thin film and a photo-reactive molecule, 4,4'-diazostilbene-2,2'-disulfonic acid disodium salt (DAS), as a model small functional molecule, we have demonstrated remarkably accelerated adsorption/infiltration of DAS into a poly(allylamine hydrochloride) (PAH)/poly(acrylic acid) (PAA) multilayer by as high as 20-fold; meanwhile, both the film property of the multilayer and photoresponsive-crosslinking function of DAS were not disturbed. Furthermore, the infiltration of DAS and the surface morphology of the multilayer could be tuned based on their high dependence on the intensity of the high gravity field regarding different rotating speeds. The mechanism of the accelerated adsorption/infiltration under the high gravity field was interpreted by the increased turbulence of the diffusing layer with the thinned laminar boundary layer and the stepwise delivery of the local concentration gradient from the solution to the interior of the multilayer. The introduction of mechanical field provides a simple and versatile strategy to address the paradox of the contradictory loading amount and loading rate, and thus to promote applications of various membrane processes.