Construction of a biomimetic core-shell PDA@Lac bioreactor from intracellular laccase as a nano-confined biocatalyst for decolorization

Enzymes immobilized on the surface of the carriers are difficult to maintain their conformation and high activity due to the influence of the external harsh environments. A biomimetic core-shell PDA@Lac bioreactor was constructed by depositing polydopamine (PDA) on the surface of the recombinant Escherichia coli with CotA laccase gene, and releasing intracellular laccase into the PDA shell using ultrasound to break the cell wall of the bacteria. The bioreactor provided a nano-confined environment for the laccase and accelerated the mass and electron transfer in the volume-confined space, with a 2.77-fold increase in Km compared with the free laccase. Since there was no barrier of the cell wall, the crystal violet dye can enter the bioreactor to participate in the enzymatic reaction. As a result, PDA@Lac achieved excellent decolorization performance even without ABTS as an electron mediator. Moreover, the cytoplasmic solution retained in the PDA shell promoted the enzyme's tolerance to pH, temperature and harsh environments. In addition to PDA encapsulation, carbonyl and -NH₂ groups of PDA were bound covalently with -NH₂ and -COOH on the laccase in the PDA@Lac, resulting in an extremely high laccase loading of 817.59 mg/g. Also, the relative activity of the bioreactor maintained approximately 75% after 10 cycles of reuse. In addition, the protection of the PDA shell increased the resistance of laccase to UV irradiation. This work provides a novel method of laccase immobilization for application in wastewater treatment.

Dopamine-Assisted Modification of Polypropylene Film to Attain Hydrophilic Mineral-Rich Surfaces

The presented study focuses on the modification of polypropylene (PP) film with tetraethyl orthosilicate (TEOS) under heterogeneous conditions via polydopamine/polyethylene imine (PDA/PEI) chemistry using a facile dip-coating procedure to attain hydrophilic mineral-rich surfaces. Thus, the resulting PP-based films were further immersed in ion-rich simulated body fluid (SBF) to deposit Ca-based minerals onto the film's surfaces efficiently. In addition, the chemical reaction mechanism on PP film was proposed, and mineralisation potential inspected by determination of functional groups of deposits, zeta potential, hydrophilicity and surface morphology/topography using Fourier transform infrared (FTIR) spectroscopy, streaming potential, water contact angle (WCA), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The obtained results show the improved wettability of samples on account of PDA inclusion (WCA was reduced from 103° for pure PP film to 28° for PDA-modified film), as well as the presence of functional groups, due to the PDA/PEI/TEOS surface functionalisation, increased the ability of minerals to nucleate on the PP film's surface when it was exposed to an SBF medium. Moreover, the higher surface roughness due to the silica coatings influenced the enhanced anchoring and attachment of calcium phosphate (CaP), revealing the potential of such a facile approach to modify the chemically inert PP films, being of particular interest in different fields, including regenerative medicine.

Multi-enzyme co-immobilized nano-assemblies: Bringing enzymes together for expanding bio-catalysis scope to meet biotechnological challenges

Co-immobilization of multi-enzymes has emerged as a promising concept to design and signify bio-catalysis engineering. Undoubtedly, the existence and importance of basic immobilization methods such as encapsulation, covalent binding, cross-linking, or even simple adsorption cannot be ignored as they are the core of advanced co-immobilization strategies. Different strategies have been developed and deployed to green the twenty-first century bio-catalysis. Moreover, co-immobilization of multi-enzymes has successfully resolved the limitations of individual enzyme loaded constructs. With an added value of this advanced bio-catalysis engineering platform, designing, and fabricating co-immobilized enzymes loaded nanostructure carriers to perform a particular set of reactions with high catalytic turnover is of supreme interest. Herein, we spotlight the emergence of co-immobilization strategies by bringing multi-enzymes together with various types of nanocarriers to expand the bio-catalysis scope. Following a brief introduction, the first part of the review focuses on multienzyme co-immobilization strategies, i.e., random co-immobilization, compartmentalization, and positional co-immobilization. The second part comprehensively covers four major categories of nanocarriers, i.e., carbon based nanocarriers, polymer based nanocarriers, silica-based nanocarriers, and metal-based nanocarriers along with their particular examples. In each section, several critical factors that can affect the performance and successful deployment of co-immobilization of enzymes are given in this work.

Smart Layer-by-Layer Polymeric Microreactors: pH-Triggered Drug Release and Attenuation of Cellular Oxidative Stress as Prospective Combination Therapy

Polymer capsules fabricated via the layer-by-layer (LbL) approach have emerged as promising biomedical systems for the release of a wide variety of therapeutic agents, owing to their tunable and controllable structure and the possibility to include several functionalities in the polymeric membrane during the fabrication process. However, the limitation of the capsules with a single functionality to overcome the challenges involved in the treatment of complex pathologies denotes the need to develop multifunctional capsules capable of targeting several mediators and/or mechanisms. Oxidative stress is caused by the accumulation of reactive oxygen species [e.g., hydrogen peroxide (H2O2), hydroxyl radicals (•OH), and superoxide anion radicals (•O2-)] in the cellular microenvironment and is a key modulator in the pathology of a broad range of inflammatory diseases. The disease microenvironment is also characterized by the presence of proinflammatory cytokines, increased levels of matrix metalloproteinases, and acidic pH, all of which could be exploited to trigger the release of therapeutic agents. In the present work, multifunctional capsules were fabricated via the LbL approach. Capsules were loaded with an antioxidant enzyme (catalase) and functionalized with a model drug (doxorubicin), which was conjugated to an amine-containing dendritic polyglycerol through a pH-responsive linker. These capsules efficiently scavenge H2O2 from solution, protecting cells from oxidative stress, and release the model drug in acidic microenvironments. Accordingly, in this work, a polymeric microplatform is presented as an unexplored combinatorial approach applicable for multiple targets of inflammatory diseases, in order to perform controlled spatiotemporal enzymatic reactions and drug release in response to biologically relevant stimuli.

Immobilization of Multi-Enzymes on Support Materials for Efficient Biocatalysis

Multi-enzyme biocatalysis is an important technology to produce many valuable chemicals in the industry. Different strategies for the construction of multi-enzyme systems have been reported. In particular, immobilization of multi-enzymes on the support materials has been proved to be one of the most efficient approaches, which can increase the enzymatic activity via substrate channeling and improve the stability and reusability of enzymes. A general overview of the characteristics of support materials and their corresponding attachment techniques used for multi-enzyme immobilization will be provided here. This review will focus on the materials-based techniques for multi-enzyme immobilization, which aims to present the recent advances and future prospects in the area of multi-enzyme biocatalysis based on support immobilization.

Mussel-Inspired pH-Switched Assembly of Capsules with an Ultrathin and Robust Nanoshell

Enclosed films, also called capsules, bearing an ultrathin and robust nanoshell have sparked much interest for use in many applications, for which facile preparation methods are urgently pursued. Inspired by the pH-programmed adhesion/cohesion of mussel-secreted foot proteins, polyphenol/polyamine capsules with an ultrathin and robust nanoshell are fabricated through a pH-switched assembly on sacrificial calcium carbonate (CaCO₃) templates. Polyphenols adhere to the templates at pH 6.0 and rapidly cohere with polyamines at pH 8.0. The pH-switched assembly process is accomplished in only a few minutes where multiple instances of electrostatic interactions and chemical conjugation between polyphenols and polyamines occur. As a result, the capsules exhibit a nanoshell thickness of ∼10 nm and a superior mechanical strength of ∼1.575 GPa (elasticity modulus). Cell mimics are prepared through encasing enzymes in the lumen and present an activity recovery of ∼70% along with little activity decline during reuse. Amine or phenolic groups on the nanoshell of capsules are then applied to induce the generation of titania or silver nanoparticles, which may expand the applications of the capsules to the photo- and biorelated realms. Our study not only deepens the understanding of the adhering process of mussels but also offers a generic method toward functional materials for diverse applications.

PG-PEI-Ag NPs-Decorated Membrane for Pretreatment of Laboratory Wastewater: Simultaneous Removal of Water-Insoluble Organic Solvents and Water-Soluble Anionic Organic Pollutants

Generally, waste liquid in laboratory can be roughly classified into organic wastewater and inorganic wastewater. However, in some experiments, organic phase and water phase are inevitably mixed together, leaving the postclassification and disposal intractable. Traditionally, we used methods like distillation and extraction to separate these two phases, however, always consuming significant amounts of labor and time and meanwhile having an unsatisfactory separation efficiency. Here, we proposed an improved processing method with a propyl gallate (PG)-polyethyleneimine (PEI)-Ag nanoparticles (NPs)-decorated membrane, possessing the special wettability designed for organic and water phase separation. Accordingly, various kinds of organic solvents/water mixtures were tested, where the PG-PEI-Ag NPs-decorated membrane was used like a common filter paper, fixed onto the funnel of the waste liquid barrel. Afterward, the two phase mixtures were poured onto the membrane; as a result, the organic phase was blocked above while the water phase was left below. All kinds of organic solvents/water mixtures showed higher than 99.90% removal efficiency. Besides, the membrane can remove water-soluble anionic organic molecules through electrostatic interaction. Thus, along the phase separation, anionic organic molecules in water can be removed simultaneously. This pretreatment of lab wastewater with the PG-PEI-Ag NPs-decorated membrane is simple and efficient, relieving the pressure of postcollection and disposal to some extent.

Metal-Organic-Framework-Based Enzymatic Microfluidic Biosensor via Surface Patterning and Biomineralization

Recently, the biomineralization of enzyme in metal-organic-framework (enzyme-MOF) composite have shown a great potential to increase enzymes stability without compromising their activity; hence, it is desirable for its applications in biosensing devices. Nonetheless, most of the enzyme-MOF research has been focusing on enzyme encapsulation in particle form, which limits its synthesis flexibility for practical applications because of its requirement for postsynthesis immobilization onto solid support. Therefore, to develop a diagnostic device out of the biomineralized enzyme, surface patterning and integration of microfluidic system offers many advantages. In this work, mussel-inspired polydopamine/polyethyleneimine (PDA/PEI) coating is employed to pattern enzyme-MOF in microfluidic channels and exploit the wettability gradient for "pumpless transportation" effect. As a proof of concept, we combine a cascade reaction of glucose oxidase (GOx) and horseradish peroxidase (HRP) enzymes to detect glucose into a patterned zeolitic imidazole framework-8 (ZIF-8) thin film on a flexible polymeric substrate. The results show that the ZIF-8/GOx&HRP in situ composites on PDA/PEI patterns have good acid and thermal stability compared with samples without ZIF-8. ZIF-8/GOx&HRP in situ shows high selectivity toward glucose, linear sensitivity of 0.00303 Abs/μM, and the limit of detection of 8 μM glucose concentration. An unexpected benefit of this approach is the ability of the ZIF-8 thin-film structure to provide a diffusion limiting effect for substrate influx, thus, producing high range of linear response range (8 μM to 5 mM of glucose). This work provides insights into the spatial location of the enzymes in MOF thin films and the potential of such patterning techniques for MOF-based biosensors using other types of biological elements such as antibodies and aptamers.

Untemplated Resveratrol-Mediated Polydopamine Nanocapsule Formation

Nanocapsules can be designed for applications including drug delivery, catalysis, and biological imaging. The mussel-inspired material polydopamine is a promising shell layer for nanocapsules because of its free radical scavenging capacity, ability to react with a broad range of functional molecules, lack of toxicity, and biodegradability. Previous reports of polydopamine nanocapsule formation have relied on a templating approach. Herein, we report a template-free approach to polydopamine nanocapsule formation in the presence of resveratrol, a naturally occurring anti-inflammatory and antioxidant compound found in red wine and grapes. Synthesis of nanocapsules occurs spontaneously in an ethanolic resveratrol/dopamine·HCl solution at pH 8.5. UV-vis absorbance spectroscopy and X-ray photoelectron spectroscopy indicate that resveratrol is incorporated into the nanocapsules. We also observed the formation of a soluble fluorescent dopamine-resveratrol adduct during synthesis, which was identified by high-performance liquid chromatography, UV-vis spectroscopy, and electrospray ionization mass spectrometry. Using transmission electron microscopy and dynamic light scattering, we studied the influence of solvent composition, dopamine concentration, and resveratrol/dopamine ratio on the nanocapsule diameter and shell thickness. The resulting nanocapsules have excellent free radical scavenging activity as measured by a 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay. Our work provides a convenient pathway by which resveratrol, and possibly other hydrophobic bioactive compounds, may be encapsulated within polydopamine nanocapsules.

Dopamine-assisted co-deposition: An emerging and promising strategy for surface modification

Mussel-inspired chemistry based on polydopamine (PDA) deposition has been developed as a facile and universal method for the surface modification of various materials. However, the inherent shortcomings of PDA coatings still impede their practical applications in the development of functional materials. In this review, we introduce the recent progress in the emerging dopamine-assisted co-deposition as a one-step strategy for functionalizing PDA-based coatings, and improving them in the aspects of deposition rate, morphology uniformity, surface wettability and chemical stability. The co-deposition mechanisms are categorized and discussed according to the interactions of dopamine or PDA with the introduced co-component. We also emphasize the influence of these interactions on the properties of the resultant PDA-based coatings. Meanwhile, we conclude the representative potential applications of those dopamine-assisted co-deposited coatings in material science, especially including separation membranes and biomaterials. Finally, some important issues and perspectives for theoretical study and applications are briefly discussed.

Antioxidant functionalized polymer capsules to prevent oxidative stress

Polymeric capsules exhibit significant potential for therapeutic applications as microreactors, where the bio-chemical reactions of interest are efficiently performed in a spatial and time defined manner due to the encapsulation of an active biomolecule (e.g., enzyme) and control over the transfer of reagents and products through the capsular membrane. In this work, catalase loaded polymer capsules functionalized with an external layer of tannic acid (TA) are fabricated via a layer-by-layer approach using calcium carbonate as a sacrificial template. The capsules functionalised with TA exhibit a higher scavenging capacity for hydrogen peroxide and hydroxyl radicals, suggesting that the external layer of TA shows intrinsic antioxidant properties, and represents a valid strategy to increase the overall antioxidant potential of the developed capsules. Additionally, the hydrogen peroxide scavenging capacity of the capsules is enhanced in the presence of the encapsulated catalase. The capsules prevent oxidative stress in an in vitro inflammation model of degenerative disc disease. Moreover, the expression of matrix metalloproteinase-3 (MMP-3), and disintegrin and metalloproteinase with thrombospondin motif-5 (ADAMTS-5), which represents the major proteolytic enzymes in intervertebral disc, are attenuated in the presence of the polymer capsules. This platform technology exhibits potential to reduce oxidative stress, a key modulator in the pathology of a broad range of inflammatory diseases.

STATEMENT OF SIGNIFICANCE

Oxidative stress damages important cell structures leading to cellular apoptosis and senescence, for numerous disease pathologies including cancer, neurodegeneration or osteoarthritis. Thus, the development of biomaterials-based systems to control oxidative stress has gained an increasing interest. Herein, polymer capsules loaded with catalase and functionalized with an external layer of tannic acid are fabricated, which can efficiently scavenge important reactive oxygen species (i.e., hydroxyl radicals and hydrogen peroxide) and modulate extracellular matrix activity in an in vitro inflammation model of nucleus pulposus. The present work represents accordingly, an important advance in the development and application of polymer capsules with antioxidant properties for the treatment of oxidative stress, which is applicable for multiple inflammatory disease targets.

New Approach for the Synthesis of Nanozirconia Fortified Microcapsules

Robust poly(urea-formaldehyde) (PUF) microcapsules with composite shells comprising zirconia (ZrO₂) nanopowder incorporated in PUF were fabricated via a novel and facile one-pot synthesis. ZrO₂ nanopowder was chosen because it owns one of the highest mechanical strengths among ceramics. The nanopowder was predispersed in the core material to combine encapsulation and fortification into a single process. In the core, the well-dispersed nanopowder migrated to the interface, where PUF polymerization took place. The mechanical strength of the microcapsule with nano-ZrO₂ incorporated in the shell (42% by weight) is three times greater than that of the microcapsule without ZrO₂. In a preliminary application wherein the microcapsules were embedded in a model of poly(vinyl alcohol) (PVA) membrane, the PVA specimen exhibited a higher ultimate tensile strength when fortified microcapsules were embedded than when unfortified microcapsules were used.

Preparation and property of epoxy resins-penetrated aligned carbon nanotube bundle hybrid microcapsules for self-healing polymers

The epoxy resins-penetrated aligned carbon nanotube bundle (ACNTsB) hybrid system (epoxy@ACNTsB) was prepared by soaking ACNTsB in the acetone solution of epoxy resins. Epoxy@ACNTsB was encapsulated in aqueous solution containing an amine curing agent to prepare hybrid microcapsules (MCs). The structure and morphology of MCs were characterized by Fourier transform infrared spectroscopy, scanning electronic microscopy, transmission electron microscopy, and laser scanning confocal microscopy. The thermal properties of MCs were carried out by differential scanning calorimetry and thermogravimetric analysis. The solvent resistance of MCs in acetone was also investigated. The results show that MCs exhibit high initial decomposition of temperatures (266°C). The content of epoxy resin in MCs is about 74% and the polymer film thickness of MCs is from 1 to 2 μm. MCs show high thermal and chemical stability below 200°C and excellent solvent resistance. MCs embedded in cyanate ester (CE) resins can significantly toughen the matrix. The fracture MCs can release the epoxy resins under heating condition, and the released epoxy resins can react with the reactive –OCN group/triazine rings in the CE matrix to rebond the crack surfaces. When the temperature schedule of 100°C/1 h + 200°C/2 h is applied, 10–15 wt% MCs can recover from 82.7% to 99.8% of the original fracture toughness of CE matrix.

Facile one-pot assembly of adhesive phenol/FeIII/PEI complexes for preparing magnetic hybrid microcapsules

Magnetic organic–inorganic hybrid microcapsules consisting of plant phenols, polyethylenimine and Fe^III ion complexes were prepared in a facile one-pot way.