Azide and trans-cyclooctene dUTPs: incorporation into DNA probes and fluorescent click-labelling

Nitrogen-Centered Radicals Derived from Azidonucleosides

Azido-modified nucleosides have been extensively explored as substrates for click chemistry and the metabolic labeling of DNA and RNA. These compounds are also of interest as precursors for further synthetic elaboration and as therapeutic agents. This review discusses the chemistry of azidonucleosides related to the generation of nitrogen-centered radicals (NCRs) from the azido groups that are selectively inserted into the nucleoside frame along with the subsequent chemistry and biological implications of NCRs. For instance, the critical role of the sulfinylimine radical generated during inhibition of ribonucleotide reductases by 2'-azido-2'-deoxy pyrimidine nucleotides as well as the NCRs generated from azidonucleosides by radiation-produced (prehydrated and aqueous) electrons are discussed. Regio and stereoselectivity of incorporation of an azido group ("radical arm") into the frame of nucleoside and selective generation of NCRs under reductive conditions, which often produce the same radical species that are observed upon ionization events due to radiation and/or other oxidative conditions that are emphasized. NCRs generated from nucleoside-modified precursors other than azidonucleosides are also discussed but only with the direct relation to the same/similar NCRs derived from azidonucleosides.

Lanthanide Complex for Single-Molecule Fluorescent in Situ Hybridization and Background-Free Imaging

Traditional single-molecule fluorescence in situ hybridization (smFISH) methods for RNA detection often face sensitivity challenges due to the low fluorescence intensity of the probe. Also, short-lived autofluorescence complicates obtaining clear signals from tissue sections. In response, we have developed an smFISH probe using highly grafted lanthanide complexes to address both concentration quenching and autofluorescence background. Our approach involves an oligo PCR incorporating azide-dUTP, enabling conjugation with lanthanide complexes. This method has proven to be stable, convenient, and cost-effective. Notably, for the mRNA detection in SKBR3 cells, the lanthanide probe group exhibited 2.5 times higher luminescence intensity and detected 3 times more signal points in cells compared with the Cy3 group. Furthermore, we successfully applied the probe to image HER2 mRNA molecules in breast cancer FFPE tissue sections, achieving a 2.7-fold improvement in sensitivity compared to Cy3-based probes. These results emphasize the potential of time-resolved smFISH as a highly sensitive method for nucleic acid detection, free of background fluorescence interference.

Bioorthogonal Chemistry in Cellular Organelles

While bioorthogonal reactions are routinely employed in living cells and organisms, their application within individual organelles remains limited. In this review, we highlight diverse examples of bioorthogonal reactions used to investigate the roles of biomolecules and biological processes as well as advanced imaging techniques within cellular organelles. These innovations hold great promise for therapeutic interventions in personalized medicine and precision therapies. We also address existing challenges related to the selectivity and trafficking of subcellular dynamics. Organelle-targeted bioorthogonal reactions have the potential to significantly advance our understanding of cellular organization and function, provide new pathways for basic research and clinical applications, and shape the direction of cell biology and medical research.

trans-Cyclooctene- and Bicyclononyne-Linked Nucleotides for Click Modification of DNA with Fluorogenic Tetrazines and Live Cell Metabolic Labeling and Imaging

A series of 2'-deoxyribonucleoside triphosphates (dNTPs) bearing 2- or 4-linked trans-cyclooctene (TCO) or bicyclononyne (BCN) tethered through a shorter propargylcarbamate or longer triethyleneglycol-based spacer were designed and synthesized. They were found to be good substrates for KOD XL DNA polymerase for primer extension enzymatic synthesis of modified oligonucleotides. We systematically tested and compared the reactivity of TCO- and BCN-modified nucleotides and DNA with several fluorophore-containing tetrazines in inverse electron-demand Diels-Alder (IEDDA) click reactions to show that the longer linker is crucial for efficient labeling. The modified dNTPs were transported into live cells using the synthetic transporter SNTT1, incubated for 1 h, and then treated with tetrazine conjugates. The PEG3-linked 4TCO and BCN nucleotides showed efficient incorporation into genomic DNA and good reactivity in the IEDDA click reaction with tetrazines to allow staining of DNA and imaging of DNA synthesis in live cells within time periods as short as 15 min. The BCN-linked nucleotide in combination with TAMRA-linked (TAMRA = carboxytetramethylrhodamine) tetrazine was also efficiently used for staining of DNA for flow cytometry. This methodology is a new approach for in cellulo metabolic labeling and imaging of DNA synthesis which is shorter, operationally simple, and overcomes several problems of previously used methods.

Azide-modified Nucleosides as Versatile Tools for Bioorthogonal Labeling and Functionalization

Azide-modified nucleosides are important building blocks for RNA and DNA functionalization by click chemistry based on azide-alkyne cycloaddition. This has put demand on synthetic chemistry to develop approaches for the preparation of azide-modified nucleoside derivatives. We review here the available methods for the synthesis of various nucleosides decorated with azido groups at the sugar residue or nucleobase, their incorporation into oligonucleotides and cellular RNAs, and their application in azide-alkyne cycloadditions for labelling and functionalization.

[4+2] and [2+4] cycloaddition reactions on single- and double-stranded DNA: a dual-reactive nucleoside

Here we report dual reactivity of diene-modified duplex DNA containing 5-(1,3-butadienyl)-2'-deoxyuridine “BDdU”. Regular-electron demand [4+2] cycloaddition proceeded upon addition of a maleimide, whereas inversed-electron demand [2+4] cycloaddition occurred upon addition...

Manipulating Chemical Processes by Pseudosolid Spatial Limitation

It is always preferred to perform chemical processes in liquid or gas phases because of the merits of operation convenience, reaction efficiency, and component homogeneity. However, tremendous efforts have to be made to purify the final product and minimize procedure losses unless a well-defined chemical mechanism is found. Herein, an unconventional chemical functioning system accommodating molecule-in-pseudosolid manipulation is reported. It entails the properties of enhanced molecular effective collision and directional guidance for delicate chemical reaction spatial controls. This design achieves facilitated rates on multicomponent chemical reactions with pros of unique simultaneous final product separation through intrapseudosolid spatial limitation. Localized homogeneous component mixing, pronounced molecular collision, and pure product separation happening in this action surmount the obstacles of conventional chemical operation with a straightforward sketch. A path toward fine chemistry is therefore paved, where traditional thoughts on beneficial reaction environments may be reconsidered.

Expanding the chemical functionality of DNA nanomaterials generated by rolling circle amplification

Rolling circle amplification (RCA) is a powerful tool for the construction of DNA nanomaterials such as hydrogels, high-performance scaffolds and DNA nanoflowers (DNFs), hybrid materials formed of DNA and magnesium pyrophosphate. Such DNA nanomaterials have great potential in therapeutics, imaging, protein immobilisation, and drug delivery, yet limited chemistry is available to expand their functionality. Here, we present orthogonal strategies to produce densely modified RCA products and DNFs. We provide methods to selectively modify the DNA component and/or the protein cargo of these materials, thereby greatly expanding the range of chemical functionalities available to these systems. We have used our methodology to construct DNFs bearing multiple surface aptamers and peptides capable of binding to cancer cells that overexpress the HER2 oncobiomarker, demonstrating their potential for diagnostic and therapeutic applications.

1,3-Diketone-Modified Nucleotides and DNA for Cross-Linking with Arginine-Containing Peptides and Proteins

Linear or branched 1,3-diketone-linked thymidine 5'-O-mono- and triphosphate were synthesized through CuAAC click reaction of diketone-alkynes with 5-azidomethyl-dUMP or -dUTP. The triphosphates were good substrates for KOD XL DNA polymerase in primer extension synthesis of modified DNA. The nucleotide bearing linear 3,5-dioxohexyl group (HDO) efficiently reacted with arginine-containing peptides to form stable pyrimidine-linked conjugates, whereas the branched 2-acetyl-3-oxo-butyl (PDO) group was not reactive. Reaction with Lys or a terminal amino group formed enamine adducts that were prone to hydrolysis. This reactive HDO modification in DNA was used for bioconjugations and cross-linking with Arg-containing peptides or proteins (e.g. histones).

Carborane- or Metallacarborane-Linked Nucleotides for Redox Labeling. Orthogonal Multipotential Coding of all Four DNA Bases for Electrochemical Analysis and Sequencing

We report a series of 2'-deoxyribonucleoside triphosphates bearing dicarba-nido-undecaborate ([C₂B₉H₁₁]^1-), [3,3'-iron-bis(1,2-dicarbollide)]^- (FESAN, [Fe(C₂B₉H₁₁)₂]^2-) or [3,3'-cobalt-bis(1,2-dicarbollide)]^- (COSAN, [Co(C₂B₉H₁₁)₂]^2-) groups prepared either through the Sonogashira cross-coupling or the CuAAC click reaction. The modified dN^XTPs were substrates for KOD XL DNA polymerase in enzymatic synthesis of modified DNA through primer extension (PEX). The nido-carborane- and FESAN-modified nucleotides gave analytically useful oxidation signals in square-wave voltammetry and were used for redox labeling of DNA. The redox-modified DNA probes were prepared by PEX using tailed primers and were hybridized to electrode (gold or glassy carbon) containing capture oligonucleotides. The combination of nido-carborane- and FESAN-linked nucleotides with 7-ferrocenylethynyl-7-deaza-dATP and 7-deaza-dGTP allowed polymerase synthesis of DNA fully modified at all four nucleobases, and each of the redox labels gave four differentiable and ratiometric signals in voltammetry. Thus, the combination of these four redox labels constitutes the first fully orthogonal redox coding of all four canonical nucleobases, which can be used for determination of nucleobase composition of short DNA stretches in one simple PEX experiment with electrochemical readout.

A Hitchhiker's Guide to Click-Chemistry with Nucleic Acids

Click chemistry is an immensely powerful technique for the fast and efficient covalent conjugation of molecular entities. Its broad scope has positively impacted on multiple scientific disciplines, and its implementation within the nucleic acid field has enabled researchers to generate a wide variety of tools with application in biology, biochemistry, and biotechnology. Azide-alkyne cycloadditions (AAC) are still the leading technology among click reactions due to the facile modification and incorporation of azide and alkyne groups within biological scaffolds. Application of AAC chemistry to nucleic acids allows labeling, ligation, and cyclization of oligonucleotides efficiently and cost-effectively relative to previously used chemical and enzymatic techniques. In this review, we provide a guide to inexperienced and knowledgeable researchers approaching the field of click chemistry with nucleic acids. We discuss in detail the chemistry, the available modified-nucleosides, and applications of AAC reactions in nucleic acid chemistry and provide a critical view of the advantages, limitations, and open-questions within the field.

Modified nucleoside triphosphates in bacterial research for in vitro and live-cell applications

Modified nucleoside triphosphates (NTPs) are invaluable tools to probe bacterial enzymatic mechanisms, develop novel genetic material, and engineer drugs and proteins with new functionalities. Although the impact of nucleobase alterations has predominantly been studied due to their importance for protein recognition, sugar and phosphate modifications have also been investigated. However, NTPs are cell impermeable due to their negatively charged phosphate tail, a major hurdle to achieving live bacterial studies. Herein, we review the recent advances made to investigate and evolve bacteria and their processes with the use of modified NTPs by exploring alterations in one of the three moieties: the nucleobase, the sugar and the phosphate tail. We also present the innovative methods that have been devised to internalize NTPs into bacteria for in vivo applications.

Nucleotide-Bearing Benzylidene-Tetrahydroxanthylium Near-IR Fluorophore for Sensing DNA Replication, Secondary Structures and Interactions

Thymidine triphosphate bearing benzylidene-tetrahydroxanthylium near-IR fluorophore linked to the 5-methyl group via triazole was synthesized through the CuAAC reaction and was used for polymerase synthesis of labelled DNA probes. The fluorophore lights up upon incorporation to DNA (up to 348-times) presumably due to interactions in major groove and the fluorescence further increases in the single-stranded oligonucleotide. The labelled dsDNA senses binding of small molecules and proteins by a strong decrease of fluorescence. The nucleotide was used as a light-up building block in real-time PCR for detection of SARS-CoV-2 virus.

Cross-linking cellular nucleic acids via a target-directing double click reagent

Bioorthogonal ligation reactions are powerful tools for characterizing DNA metabolism, DNA-protein binding interactions, and they even provide new leads for therapeutic strategies. Nucleoside analogs can deliver bioorthogonal functional groups into chromatin via cellular metabolic pathways, however, insufficient phosphorylation by endogenous kinases often limits the efficiency of their incorporation. Even when successfully metabolized into biopolymers, steric hindrance of the modified nucleotide by chromatin can inhibit subsequent click reactions. In this chapter, we describe methods that overcome these limitations. Nucleotide monophosphate triesterers can bypass the need for cellular nucleoside kinase activity and thereby enable efficient incorporation of azide groups into cellular DNA. Steric access to and modification of the azide groups within natively folded chromatin can then be accomplished using a bioorthogonal "intercalating reagent" comprised of a cationic Sondheimer diyne that reversibly intercalates into duplexes where it undergoes tandem, strain-promoted cross-linking of two azides to give DNA-DNA interstrand crosslinks or DNA-fluorophore conjugation, depending on the relative number and spatial orientation of the azide groups in the DNA.

Site-Selective and Rewritable Labeling of DNA through Enzymatic, Reversible, and Click Chemistries

Current methods for bioconjugation rely on the introduction of stable linkers that lack the required versatility to perform sequential functionalizations. However, sequential manipulations are an increasing requirement in chemical biology because they can underpin multiple analyses of the same sample to provide a wider understanding of cell behavior. Here, we present a new method to site-selectively write, remove, and rewrite chemical functionality to a biomolecule, DNA in this case. Our method combines the precision and robustness of methyltransferase-directed labeling with the reversibility of acyl hydrazones and the efficiency of click chemistry. Underpinning the method is a new S-adenosyl-l-methionine derivative to site-selectively label DNA with a bifunctional chemical handle containing an acyl hydrazone-linker and a terminal azide. Functional tags are conjugated via the azide and can be removed (i.e., untagged) when needed at the acyl hydrazone via exchange with hydroxyl amine. The formed hydrazide-labeled DNA is a versatile intermediate that can be either rewritten to reset the original chemical handle or covalently reacted with a permanent tag. This ability to write, tag, untag, and permanently tag DNA is exploited to sequentially introduce two fluorescent dyes on DNA. Finally, we demonstrate the potential of the method by developing a protocol to sort labeled DNA using magnetic beads, with subsequent amplification of the sorted DNA sample for further analysis. The presented method opens new avenues for site-selective bioconjugation and should underpin integrative approaches in chemical biology where sequential functionalizations of the same sample are required.

Triazine-Modified 7-Deaza-2'-deoxyadenosines: Better Suited for Bioorthogonal Labeling of DNA by PCR than 2'-Deoxyuridines

6-Ethynyl-1,2,4-triazine is a small bioorthogonally reactive group we applied for fluorescent labeling of oligonucleotides by Diels-Alder reactions with inverse electron demand. We synthetically attached this functional group to the 7-position of 7-deaza-2'-deoxyadenosine triphosphate and to the 5-position of 2'-deoxyuridine triphosphate. Both modified nucleotide triphosphates were used in comparison for primer extension experiments (PEX) and PCR amplification to finally yield multilabeled oligonucleotides by the postsynthetic reaction with a highly reactive bicyclo[6.1.0]nonyne-rhodamine conjugate. These experiments show that 6-ethynyl-1,2,4-triazine is much better tolerated by the DNA polymerase when attached to the 7-position of 7-deaza-2'-deoxyadenosine in comparison to the attachment at the 5-position of 2'-deoxyuridine. This became evident both by PAGE analysis of the PCR products and real-time kinetic observation of DNA polymerase activity during primer extension using switchSENSE. Generally, our results imply that bioorthogonal labeling strategies are better suited for 7-deaza-2'-adenosines than conventional and available 2'-deoxyuridines.

Copper-free dual labeling of DNA by triazines and cyclopropenes as minimal orthogonal and bioorthogonal functions

Two different and small functions for inverse electron demand Diels–Alder reactions were applied for dual labeling of DNA: the 1,2,4-triazine was attached to the 5-position of 2′-deoxyuridine, and the 1-methylcyclopropene to the 7-position of 7-deaza-2′-deoxyadenosine.

Two different and small functions for inverse electron demand Diels–Alder reactions were applied for dual labeling of DNA: the 1,2,4-triazine was attached to the 5-position of 2′-deoxyuridine triphosphate, and the 1-methylcyclopropene to the 7-position of 7-deaza-2′-deoxyadenosine triphosphate. These two modified nucleotides were sequence-selectively incorporated into oligonucleotides by DNA polymerases. These products were labeled by two different fluorescent dyes using postsynthetic reactions that are not only bioorthogonal in general, but also mutually orthogonal.

Electron-Mediated Aminyl and Iminyl Radicals from C5 Azido-Modified Pyrimidine Nucleosides Augment Radiation Damage to Cancer Cells

Two classes of azido-modified pyrimidine nucleosides were synthesized as potential radiosensitizers; one class is 5-azidomethyl-2'-deoxyuridine (AmdU) and cytidine (AmdC), while the second class is 5-(1-azidovinyl)-2'-deoxyuridine (AvdU) and cytidine (AvdC). The addition of radiation-produced electrons to C5-azido nucleosides leads to the formation of π-aminyl radicals followed by facile conversion to σ-iminyl radicals either via a bimolecular reaction involving intermediate α-azidoalkyl radicals in AmdU/AmdC or by tautomerization in AvdU/AvdC. AmdU demonstrates effective radiosensitization in EMT6 tumor cells.

Clickable PNA Probes for Imaging Human Telomeres and Poly(A) RNAs

The ability to bind strongly to complementary nucleic acid sequences, invade complex nucleic acid structures, and resist degradation by cellular enzymes has made peptide nucleic acid (PNA) oligomers as very useful hybridization probes in molecular diagnosis. For such applications, the PNA oligomers have to be labeled with appropriate reporters as they lack intrinsic labels that can be used in biophysical assays. Although solid-phase synthesis is commonly used to attach reporters onto PNA, development of milder and modular labeling methods will provide access to PNA oligomers labeled with a wider range of biophysical tags. Here, we describe the establishment of a postsynthetic modification strategy based on bioorthogonal chemical reactions in functionalizing PNA oligomers in solution with a variety of tags. A toolbox composed of alkyne- and azide-modified monomers were site-specifically incorporated into PNA oligomers and postsynthetically click-functionalized with various tags, ranging from sugar, amino acid, biotin, to fluorophores, by using copper(I)-catalyzed azide-alkyne cycloaddition, strain-promoted azide-alkyne cycloaddition, and Staudinger ligation reactions. As a proof of utility of this method, fluorescent PNA hybridization probes were developed and used in imaging human telomeres in chromosomes and poly(A) RNAs in cells. Taken together, this simple approach of generating a wide range of functional PNA oligomers will expand the use of PNA in molecular diagnosis.

Intercalation-enhanced "Click" Crosslinking of DNA

DNA-DNA cross-linking agents constitute an important family of chemotherapeutics that non-specifically react with endogenous nucleophiles and therefore exhibit undesirable side effects. Here we report a cationic Sondheimer diyne derivative "DiMOC" that exhibits weak, reversible intercalation into duplex DNA (K_d =15 μm) where it undergoes tandem strain-promoted cross-linking of azide-containing DNA to give DNA-DNA interstrand crosslinks (ICLs) with an exceptionally high apparent rate constant k_app =2.1×10⁵  m^-1  s^-1 . This represents a 21 000-fold rate enhancement as compared the reaction between DIMOC and 5-(azidomethyl)-2'-deoxyuridine (AmdU) nucleoside. As single agents, 5'-bispivaloyloxymethyl (POM)-AmdU and DiMOC exhibited low cytotoxicity, but highly toxic DNA-DNA ICLs were generated by metabolic incorporation of AmdU groups into cellular DNA, followed by treatment of the cells with DiMOC. These results provide the first examples of intercalation-enhanced bioorthogonal chemical reactions on DNA, and furthermore, the first strain-promoted double click (SPDC) reactions inside of living cells.

2-Allyl- and Propargylamino-dATPs for Site-Specific Enzymatic Introduction of a Single Modification in the Minor Groove of DNA

A series of 2-alkylamino-2'-deoxyadenosine triphosphates (dATP) was prepared and found to be substrates for the Therminator DNA polymerase, which incorporated only one modified nucleotide into the primer. Using a template encoding for two consecutive adenines, conditions were found for incorporation of either one or two modified nucleotides. In all cases, addition of a mixture of natural dNTPs led to primer extension resulting in site-specific single modification of DNA in the minor groove. The allylamino-substituted DNA was used for the thiol-ene addition, whereas the propargylamino-DNA for the CuAAC click reaction was used to label the DNA with a fluorescent dye in the minor groove. The approach was used to construct FRET probes for detection of oligonucleotides.

DNA Primer Extension with Cyclopropenylated 7-Deaza-2'-deoxyadenosine and Efficient Bioorthogonal Labeling in Vitro and in Living Cells

A deoxyadenosine triphosphate (dATP) analogue for DNA labeling was synthesized with the 1-methylcyclopropene (1MCP) group at the 7-position of 7-deaza-2'-deoxyadenosine and applied for primer extension experiments. The real-time kinetic data reveals that this 1MCP-modified dATP analogue is incorporated into DNA much faster than that of the similarly 1MCP-modified deoxyuridine triphosphate (dUTP) analogue. The postsynthetic fluorescent labeling of these oligonucleotides works efficiently according to PAGE analysis, and can be applied for immobilization of a functional antibody on a surface. Site-specific labeling at two different positions in DNA was achieved and the bioorthogonality of the postsynthetic fluorescent labeling was demonstrated in living HeLa cells.

In Vivo Incorporation of Azide Groups into DNA by Using Membrane-Permeable Nucleotide Triesters

Metabolic incorporation of bioorthogonal functional groups into cellular nucleic acids can be impeded by insufficient phosphorylation of nucleosides. Previous studies found that 5azidomethyl-2'-deoxyuridine (AmdU) was incorporated into the DNA of HeLa cells expressing a low-fidelity thymidine kinase, but not by wild-type HeLa cells. Here we report that membrane-permeable phosphotriester derivatives of AmdU can exhibit enhanced incorporation into the DNA of wild-type cells and animals. AmdU monophosphate derivatives bearing either 5'-bispivaloyloxymethyl (POM), 5'-bis-(4-acetoxybenzyl) (AB), or "Protide" protective groups were used to mask the phosphate group of AmdU prior to its entry into cells. The POM derivative "POM-AmdU" exhibited better chemical stability, greater metabolic incorporation efficiency, and lower toxicity than "AB-AmdU". Remarkably, the addition of POM-AmdU to the water of zebrafish larvae enabled the biosynthesis of azide-modified DNA throughout the body.

Synthesis of Dihydroxyalkynyl and Dihydroxyalkyl Nucleotides as Building Blocks or Precursors for Introduction of Diol or Aldehyde Groups to DNA for Bioconjugations

(3,4-Dihydroxybut-1-ynyl)uracil, -cytosine and -7-deazaadenine 2'-deoxyribonucleoside triphosphates (dNTPs) were prepared by direct aqueous Sonogashira cross-coupling of halogenated dNTPs with dihydroxybut-1-yne and converted to 3,4-dihydroxybutyl dNTPs through catalytic hydrogenation. Sodium periodate oxidative cleavage of dihydroxybutyl-dUTP gave the desired aliphatic aldehyde-linked dUTP, whereas the oxidative cleavage of the corresponding deazaadenine dNTP gave a cyclic aminal. All dihydroxyalkyl or -alkynyl dNTPs and the formylethyl-dUTP were good substrates for DNA polymerases and were used for synthesis of diol- or aldehyde-linked DNA. The aldehyde linked DNA was used for the labelling or bioconjugations through hydrazone formation or reductive aminations.

Pyrimidine Nucleosides with a Reactive (β-Chlorovinyl)sulfone or (β-Keto)sulfone Group at the C5 Position, Their Reactions with Nucleophiles and Electrophiles, and Their Polymerase-Catalyzed Incorporation into DNA

Transition-metal-catalyzed chlorosulfonylation of 5-ethynylpyrimidine nucleosides provided (E)-5-(β-chlorovinyl)sulfones A, which undergo nucleophilic substitution with amines or thiols affording B. The treatment of vinyl sulfones A with ammonia followed by acid-catalyzed hydrolysis of the intermediary β-sulfonylvinylamines gave 5-(β-keto)sulfones C. The latter reacts with electrophiles, yielding α-carbon-alkylated or -sulfanylated analogues D. The 5'-triphosphates of A and C were incorporated into double-stranded DNA, using open and one-nucleotide gap substrates, by human or Escherichia coli DNA-polymerase-catalyzed reactions.

Inverse electron demand Diels-Alder reactions in chemical biology

The emerging inverse electron demand Diels-Alder (IEDDA) reaction stands out from other bioorthogonal reactions by virtue of its unmatchable kinetics, excellent orthogonality and biocompatibility. With the recent discovery of novel dienophiles and optimal tetrazine coupling partners, attention has now been turned to the use of IEDDA approaches in basic biology, imaging and therapeutics. Here we review this bioorthogonal reaction and its promising applications for live cell and animal studies. We first discuss the key factors that contribute to the fast IEDDA kinetics and describe the most recent advances in the synthesis of tetrazine and dienophile coupling partners. Both coupling partners have been incorporated into proteins for tracking and imaging by use of fluorogenic tetrazines that become strongly fluorescent upon reaction. Selected notable examples of such applications are presented. The exceptional fast kinetics of this catalyst-free reaction, even using low concentrations of coupling partners, make it amenable for in vivo radiolabelling using pretargeting methodologies, which are also discussed. Finally, IEDDA reactions have recently found use in bioorthogonal decaging to activate proteins or drugs in gain-of-function strategies. We conclude by showing applications of the IEDDA reaction in the construction of biomaterials that are used for drug delivery and multimodal imaging, among others. The use and utility of the IEDDA reaction is interdisciplinary and promises to revolutionize chemical biology, radiochemistry and materials science.

A Mild Aqueous Sonogashira Reaction as a Fluorescent Labeling Strategy for 5-Bromide-2'-Deoxyuridine

C5-modified uridines are a valuable class of nucleoside analogues, both as potent chemotherapy agents and through their use as the conjunction site in DNA labeling strategies. As an important C5-modified uridine, BrdU has been used in cell proliferation assays since the 1980s. Currently, the detection of BrdU relies on traditional immunostaining; however, this approach has its limitations. Thus, it is desirable, albeit difficult, to develop chemistry methods to fluorescently label BrdU in a cellular context. In the present study, we report our efforts toward developing a robust chemistry methodology for BrdU fluorescent labeling. The Sonogashira reaction was chosen as the key reaction, and various alkynyl groups (aliphatic or aryl) containing fluorescent dyes were synthesized to cross-couple with BrdU. Various bases and catalyst systems were screened to evaluate the optimum conditions. A mild aqueous Sonogashira reaction (K₂PdCl₄, S-Phos, n-Bu₄N⁺OH^-, Sodium d-isoascorbate, EtOH/H₂O = 1:1, 37 °C, Ar) was obtained to enable high-yielding BrdU fluorescent labeling.

Site-specific one-pot triple click labeling for DNA and RNA

We report site-specific triple click labeling for DNA and RNA in a one-pot setup by performing inverse electron demand Diels–Alder reaction and strain-promoted and copper catalyzed click reactions sequentially.

Chemoselective Modification of Vinyl DNA by Triazolinediones

A new method for the post-synthetic modification of nucleic acids was developed that involves mixing a phenyl triazolinedione (PTAD) derivative with DNA containing a vinyl nucleobase. The resulting reactions proceeded through step-wise mechanisms, giving either a formal [4+2] cycloaddition product, or, depending on the context of nucleobase, PTAD addition along with solvent trapping to give a secondary alcohol in water. Catalyst-free addition between PTAD and the terminal alkene of 5-vinyl-2'-deoxyuridine (VdU) was exceptionally fast, with a second-order rate constant of 2×10³  m^-1  s^-1 . PTAD derivatives selectively reacted with VdU-containing oligonucleotides in a conformation-selective manner, with higher yields observed for G-quadruplex versus duplex DNA. These results demonstrate a new strategy for copper-free bioconjugation of DNA that can potentially be used to probe nucleic acid conformations in cells.

Synthesis of chemically modified DNA

Naturally occurring DNA is encoded by the four nucleobases adenine, cytosine, guanine and thymine. Yet minor chemical modifications to these bases, such as methylation, can significantly alter DNA function, and more drastic changes, such as replacement with unnatural base pairs, could expand its function. In order to realize the full potential of DNA in therapeutic and synthetic biology applications, our ability to 'write' long modified DNA in a controlled manner must be improved. This review highlights methods currently used for the synthesis of moderately long chemically modified nucleic acids (up to 1000 bp), their limitations and areas for future expansion.

Bio-orthogonal Fluorescent Labelling of Biopolymers through Inverse-Electron-Demand Diels-Alder Reactions

Bio-orthogonal labelling schemes based on inverse-electron-demand Diels-Alder (IEDDA) cycloaddition have attracted much attention in chemical biology recently. The appealing features of this reaction, such as the fast reaction kinetics, fully bio-orthogonal nature and high selectivity, have helped chemical biologists gain deeper understanding of biochemical processes at the molecular level. Listing the components and discussing the possibilities and limitations of these reagents, we provide a recent snapshot of the field of IEDDA-based biomolecular manipulation with special focus on fluorescent modulation approaches through the use of bio-orthogonalized building blocks. At the end, we discuss challenges that need to be addressed for further developments in order to overcome recent limitations and to enable researchers to answer biomolecular questions in more detail.

Chloroacetamide-Linked Nucleotides and DNA for Cross-Linking with Peptides and Proteins

Nucleotides, 2'-deoxyribonucleoside triphosphates (dNTPs), and DNA probes bearing reactive chloroacetamido group linked to nucleobase (cytosine or 7-deazadaenine) through a propargyl tether were prepared and tested in cross-linking with cysteine- or histidine-containing peptides and proteins. The chloroacetamide-modifed dNTPs proved to be good substrates for DNA polymerases in the enzymatic synthesis of modified DNA probes. Modified nucleotides and DNA reacted efficiently with cysteine and cysteine-containing peptides, whereas the reaction with histidine was sluggish and low yielding. The modified DNA efficiently cross-linked with p53 protein through alkylation of cysteine and showed potential for cross-linking with histidine (in C277H mutant of p53).

A clickable UTP analog for the posttranscriptional chemical labeling and imaging of RNA

The development of robust tools and practical RNA labeling strategies that would facilitate the biophysical analysis of RNA in both cell-free and cellular systems will have profound implications in the discovery of new RNA diagnostic tools and therapeutic strategies. In this context, we describe the development of a new alkyne-modified UTP analog, 5-(1,7-octadinyl)uridine triphosphate (ODUTP), which serves as an efficient substrate for the introduction of a clickable alkyne label into RNA transcripts by bacteriophage T7 RNA polymerase and mammalian cellular RNA polymerases. The ODU-labeled RNA is effectively used by reverse transcriptase to produce cDNA, a property which could be utilized in expanding the chemical space of a RNA library in the aptamer selection scheme. Further, the alkyne label on RNA provides a convenient tool for the posttranscriptional chemical functionalization with a variety of biophysical tags (fluorescent, affinity, amino acid and sugar) by using alkyne-azide cycloaddition reaction. Importantly, the ability of endogenous RNA polymerases to specifically incorporate ODUTP into cellular RNA transcripts enabled the visualization of newly transcribing RNA in cells by microscopy using click reactions. In addition to a clickable alkyne group, ODU contains a Raman scattering label (internal disubstituted alkyne), which exhibits characteristic Raman shifts that fall in the Raman-silent region of cells. Our results indicate that an ODU label could potentially facilitate two-channel visualization of RNA in cells by using click chemistry and Raman spectroscopy. Taken together, ODU represents a multipurpose ribonucleoside tool, which is expected to provide new avenues to study RNA in cell-free and cellular systems.

Efficient enzymatic synthesis and dual-colour fluorescent labelling of DNA probes using long chain azido-dUTP and BCN dyes

A sterically undemanding azide analogue of dTTP (AHP dUTP) with an alkyl chain and ethynyl attachment to the nucleobase was designed and incorporated into DNA by primer extension, reverse transcription and polymerase chain reaction (PCR). An azide-modified 523 bp PCR amplicon with all 335 thymidines replaced by AHP dU was shown to be a perfect copy of the template from which it was amplified. Replacement of thymidine with AHP dU increases duplex stability, accounting in part for the high incorporation efficiency of the azide-modified triphosphate. Single-stranded azide-labelled DNA was conveniently prepared from PCR products by λ-exonuclease digestion and streptavidin magnetic bead isolation. Efficient fluorescent labelling of single and double-stranded DNA was carried out using dyes functionalized with bicyclo[6.1.0]non-4-yne (BCN) via the strain-promoted alkyne-azide cycloaddition (SPAAC) reaction. This revealed that the degree of labelling must be carefully controlled to achieve optimum fluorescence and avoid fluorescence quenching. Dual-coloured probes were obtained in a single tube fluorescent labelling reaction; and varying the ratios of the two dyes provides a simple method to prepare DNA probes with unique fluorescent signatures. AHP dUTP is a versatile clickable nucleotide with potentially wide applications in biology and nanotechnology including single molecule studies and synthesis of modified aptamer libraries via SELEX.