A combined experimental and theoretical approach for doxycycline sensing using simple fluorescent probe with distinct fluorescence change in wide range of interferences

Overuse of doxycycline (DOXY) can cause serious problems to human health, environment and food quality. So, it is essential to develop a new sensing methodology that is both sensitive and selective for the quantitative detection of DOXY. In our current research, we synthesized a simple fluorescent probe 4,4'-bis(benzyloxy)-1,1'-biphenyl (BBP) for the highly selective detection of doxycycline by through fluorescence spectroscopy. The probe BBP displayed ultra-sensitivity towards doxycycline due to Forster resonance energy transfer (FRET). Fluorescence spectroscopy, density functional theory (DFT), 1H NMR titration, UV-Vis, and Job's plot were used to confirm the sensing mechanism. The charge transfer between the probe and analyte was further examined qualitatively by electron density differences (EDD) and quantitively by natural bond orbital (NBO) analyses. Whereas the non-covalent nature of probe BBP towards DOXY was verified by theoretical non-covalent interaction (NCI) analysis as along with Bader's quantum theory of atoms in molecules (QTAIM) analysis. Furthermore, probe BBP was also practically employed for the detection of doxycycline in fish samples, pharmaceutical wastewater and blood samples.

Detection of Doxycycline Using Carbon Quantum dots as Probe Based on Internal Filtering Effect

The establishment of a convenient and effective detection method for doxycycline (DC) holds significant importance in drug monitoring and drug residue assessment. In this work, carbon quantum dots (CQDs) with excellent and stable luminescence performance (the quantum yield of CQDs was 21.8%) were synthesized by the melting method and employed as probes to monitor the fluorescence intensity variations before and after the introduction of DC. A fluorescence analytical method based on the internal filtration effect (IFE) was developed for DC determination. The mechanism of DC quenching CQDs was verified using fluorescence lifetime tests, absorption spectroscopy, and evaluation of internal filtration parameters. After optimizing experimental conditions, it was found that the DC concentration (CDC) exhibited a good linear relationship with the fluorescence quenching efficiency ((F0-F)/F0) of CQDs in the range of 5-30 µM. The fitted linear equation was Y = 0.01249*CDC+0.03625, R2 = 0.9987, and the detection limit was 2.343 µM (n = 8). This developed method has been successfully applied to accurately determine DC concentrations in both doxycycline hydrochloride tablets and human serum samples. It stands out for its simplicity, rapidity, and acceptable detection performance. Due to its advantages, this method holds great promise for application in the biomedical field for monitoring DC drug concentrations and ensuring quality control.

Conductive imprinted polymeric interfacially modified electrochemical sensors based on covalently bonded layer-by-layer assembly of Gr/Au with flower-like morphology for sensitive detection of 2,4,6-TCP

Polymeric membrane sensors based on molecular imprinted polymers (MIPs) have been attractive analytical tools for detecting organic species. However, the MIPs in electrochemical sensors developed so far are usually prepared by in situ polymerization of pre-polymers and non-covalent adsorption on the surface of the working electrode. Meanwhile, the MIPs in the electrochemical sensors developed are typically made of a non-conductive polymer film. This results in a relatively low current due to the lack of electron transfer. Additionally, the smoothness of the traditional electrochemical substrate results in a low specific surface area, which reduces the sensitivity of the electrochemical sensor. Here, we describe a novel electrochemical sensor with a conductive interface and MIPs modification. The electrochemical sensor was modified by covalent coupled layer by layer self-assembly with the imprinted polymer film. The incorporation of these two conductive functional materials improves the conductivity of the electrodes and provides interface support materials to obtain high specific surface area. By using 2,4,6-trichlorophenol as the model, the sensitivity of the developed conductive sensor was greatly improved compared to that of the traditional MIPs sensor. We believe that the proposed MIPs-based sensing strategy provides a general and convenient method for making sensitive and selective electrochemical sensors.

Green ecofriendly electrochemical sensing platform for the sensitive determination of doxycycline

The detection of pharmaceutical compounds in extremely low concentrations remains a challenge despite recent advancements in electrochemical sensing. In this study, a green hydrothermally synthesized nickel hydroxide-graphene hybrid material was used for the point-of-care determination of the antibiotic doxycycline (DOXY), which is a promising treatment for COVID-19 and other infections. The electrochemical sensor, based on a screen-printed electrode modified with the hybrid material, was able to detect DOXY in the range of 5.1 × 10^-8 to 1.0 × 10^-4 M, with a low detection limit of 9.6 × 10^-9 M. This approach paves the way for eco-friendly and sustainable methods of nanomaterial synthesis for electrochemical analyses, particularly in point-of-care drug monitoring, and has the potential to improve access to testing platforms.

Detection of Residual 2-Phenylphenol on Lemon Rind by Electrochemically Deposited Poly(hydroxybenzaldehyde) and Poly(hydroxybenzoic acid) Polymeric Stackings as Electrode Modifiers

This study explores the characteristics of electrodeposition of the three hydroxybenzaldehyde isomers and selected hydroxybenzoic acids (4-hydroxybenzoic acid, salicylic acid, 3,5-dihydroxybenzoic acid) from mesityl oxide solvent. Similar to recent advances of this solvent, used by electrochemical studies, the carbon-carbon double bond had significant influence on the formation of polymers from the outlined molecules. In case of most substrates the peak currents increased to a steady-state but electropolymerization of some substrates caused significant deactivation. Scanning electron microscopic and complementary voltammetric studies facilitated that the electrochemically formed polymers are present on the electrode surface in stackings. In viewpoint of analysis of 2-phenylphenol, the modifying deposit formed from 4-hydroxybenzaldehyde was the best with 5 µM detection limit obtained with differential pulse voltammetry. Furthermore, a new procedure was chosen for the involvement of a cavitand derivative into the organic layers with the purpose to improve the layer selectivity (subsequent electrochemical polymerization in an other solution). Further studies showed that in this way the sensitivities of as-modified electrodes were a little worse than without this step, thus indicating that application of this step is disadvantageous. Recovery studies of 2-phenylphenol were carried out on lemon rind without any treatment, and it was compared with the case when the outer yellow layer was removed by rasping. The inner tissues showed very high adsorption affinity towards 2-phenylphenol.

A robust molecularly imprinted electrochemiluminescence sensor based on a Ni–Co nanoarray for the sensitive detection of spiramycin

A simple and robust molecularly imprinted electrochemiluminescence sensor for the detection of spiramycin is fabricated based on Ni–Co LDH nanoarrays and is directly used as a sensor platform.

A recyclable tetracycline imprinted polymeric SPR sensor: in synergy with itaconic acid and methacrylic acid

A novel tetracycline (TC) imprinted polymer was prepared in visible light via synergy of dual functional group monomers methacrylic acid (MAA) and itaconic acid (IA) for selective detection of TC in urine and milk samples.

Molecularly Imprinted Polymers in Electrochemical and Optical Sensors

Molecular imprinting is the process of template-induced formation of specific recognition sites in a polymer. Synthetic receptors prepared using molecular imprinting possess a unique combination of properties such as robustness, high affinity, specificity, and low-cost production, which makes them attractive alternatives to natural receptors. Improvements in polymer science and nanotechnology have contributed to enhanced performance of molecularly imprinted polymer (MIP) sensors. Encouragingly, recent years have seen an increase in high-quality publications describing MIP sensors for the determination of biomolecules, drugs of abuse, and explosives, driving toward applications of this technology in medical and forensic diagnostics. This review aims to provide a focused overview of the latest achievements made in MIP-based sensor technology, with emphasis on research toward real-life applications.

A dual-emission nano-rod MOF equipped with carbon dots for visual detection of doxycycline and sensitive sensing of MnO4−

Herein, ethanediamine-modified carbon dots (CDs) were encapsulated into luminescent MOF(Eu), which was designed for a dual-emission hybrid material (CDs@MOF(Eu)) with diverse fluorescence applications. This material exhibited high selectivity and sensitivity towards doxycycline. With an increasing concentration of doxycycline, the blue light emission of CDs could be quenched, whereas the red light emission of MOF(Eu) was enhanced. In view of this result, more convenient “test paper” was used first as a new tool for doxycycline detection, the colour of which turned from blue-purple to red as observed by the naked eyes under 365 nm UV-irradiation. This hybrid material also was a probe for sensing MnO₄⁻ with a low limit of detection and good anti-interference performance. We propose that CDs can improve detection sensitivity compared with the original MOF(Eu). The possible sensing mechanism was discussed in detail. Importantly, the feasibility of this composite for sensing doxycycline in a simulated biological system and sensing MnO₄⁻ in tap water was investigated.

A dual-emission hybrid material could detect doxycycline and MnO₄⁻ sensitively. Test paper was regarded initially as a tool for doxycycline visual detection. A lower LOD of MnO₄⁻ showed that carbon dots can accelerate quenching speed of MOF(Eu).

A novel fluorescent sensor based on sulfur and nitrogen co-doped carbon dots with excellent stability for selective detection of doxycycline in raw milk

Sulfur and nitrogen co-doped carbon dots obtained from casein exhibited excellent sensitivity and selectivity for the detection of doxycycline.

Molecularly Imprinted Membranes: Past, Present, and Future

More than 80 years ago, artificial materials with molecular recognition sites emerged. The application of molecular imprinting to membrane separation has been studied since 1962. Especially after 1990, such research has been intensively conducted by membranologists and molecular imprinters to understand the advantages of each technique with the aim of constructing an ideal membrane, which is still an active area of research. The present review aims to be a substantial, comprehensive, authoritative, critical, and general-interest review, placed at the cross section of two broad, interconnected, practical, and extremely dynamic fields, namely, the fields of membrane separation and molecularly imprinted polymers. This review describes the recent discoveries that appeared after repeated and fertile collisions between these two fields in the past three years, to which are added the worthy acknowledgments of pioneering discoveries and a look into the future of molecularly imprinted membranes. The review begins with a general introduction in membrane separation, followed by a short theoretical section regarding the basic principles of mass transport through a membrane. Following these general aspects on membrane separation, two principles of obtaining polymeric materials with molecular recognition properties are reviewed, namely, molecular imprinting and alternative molecular imprinting, followed the methods of obtaining and practical applications for the particular case of molecularly imprinted membranes. The review continues with insights into molecularly imprinted nanofiber membranes as a promising, highly optimized type of membrane that could provide a relatively high throughput without a simultaneous unwanted reduction in permselectivity. Finally, potential applications of molecularly imprinted membranes in a variety of fields are highlighted, and a look into the future of membrane separations is offered.