Nanoleaf-derived carbon materials as a sensitivity coating for solid‑phase microextraction of polycyclic aromatic hydrocarbons

Metal-organic framework-derived carbon materials have shown extensive application in the sensitive extraction of polycyclic aromatic hydrocarbons (PAHs), but more active sites for its adsorption were still a tireless pursuit. In this study, ZIF-nanoleaf-derived carbon (NLCs) was synthesized and developed as a solid-phase microextraction (SPME) fiber (NLCs-F). The extraction performance was compared with ZIF-dodecahedron-derived carbon (DHCs) coated fiber (DHCs-F), which was prepared by only changing the ratio of the reactants. The unique morphology of NLCs provided abundant adsorption active sites for the selected PAHs, while the large average aperture facilitated selective extraction of high molecular weight analytes. Additionally, the high carbon content enhanced the strong enrichment capability for hydrophobic PAHs. Hence, the prepared NLCs-F coupled with GC-MS showed a good correlation coefficient (0.9975) in a wide linear range, low limits of detection (0.3-1.8 ng L-1), satisfactory repeatability, and reproducibility, which made it apply in the enrichment of PAHs in actual tea and coffee samples.

Synthesis of Metal-Organic Framework-Based ZIF-8@ZIF-67 Nanocomposites for Antibiotic Decomposition and Antibacterial Activities

Toxic antibiotic effluents and antibiotic-resistant bacteria constitute a threat to global health. So, scientists are investigating high-performance materials for antibiotic decomposition and antibacterial activities. In this novel research work, we have successfully designed ZIF-8@ZIF-67 nanocomposites via sol-gel and solvothermal approaches. The ZIF-8@ZIF-67 nanocomposite is characterized by various techniques that exhibit superior surface area enhancement, charge separation, and high light absorption performance. Yet, ZIF-8 has high adsorption rates and active sites, while ZIF-67 has larger pore volume and efficient adsorption and reaction capabilities, demonstrating that the ZIF-8@ZIF-67 nanocomposite outperforms pristine ZIF-8 and ZIF-67. Compared with pristine ZIF-8 and ZIF-67, the most active 6ZIF-67@ZIF-8 nanocomposite showed higher decomposition efficacy for ciprofloxacin (65%), levofloxacin (54%), and ofloxacin (48%). Scavenger experiments confirmed that •OH, •O2-, and h+ are the most active species for the decomposition of ciprofloxacin (CIP), levofloxacin (LF), and ofloxacin (OFX), respectively. In addition, the 6ZIF-67/ZIF-8 nanocomposite suggested its potential applications in Escherichia coli for growth inhibition zone, antibacterial activity, and decreased viability. Moreover, the stability test and decomposition pathway of CIP, LF, and OFX were also proposed. Finally, our study aims to enhance the efficiency and stability of ZIF-8@ZIF-67 nanocomposite and potentially enable its applications in antibiotic decomposition, antibacterial activities, and environmental remediation.

Nanoporous carbon fiber derived from Cu-BDC metal organic framework @pencil graphite as a sorbent for solid phase microextraction of acetamiprid and imidacloprid

Solid-phase microextraction (SPME) is a sample pretreatment technique for enrichment of trace level of compounds from complex matrices. The fiber coating, as an extraction phase, is the significant part of SPME, which specifying the analytical performance of the developed SPME. In this study, a novel in situ fabricated Cu@porous carbon fiber that derived from copper benzene-1,4-dicarboxylate framework@pencil graphite (Cu-BDC MOF@PG) fiber was prepared as a SPME fiber. The Cu-BDC MOF was electrodeposited on the surface of pencil graphite. The Cu@porous carbon fiber with nanoporous structure was constructed by the direct carbonization of the electrosynthesized fiber. The Cu@porous carbon fiber showed high analytical performance for direct immersion SPME (DI-SPME) of acetamiprid and imidacloprid in fruit and vegetable samples. The SPME method was coupled by high-performance liquid chromatography-ultraviolet detection (SPME-HPLC-UV) for determination of the analytes. Under the optimized condition, good linear ranges (1-500 μg L-1 and 0.5-200 μg L-1) and acceptable limits of detection (LODs = 0.30 and 0.15 μg L-1), appropriate spiking recoveries in the range 87-109.0% were attained for acetamiprid and imidacloprid, respectively. Intra- and inter-day relative standard deviations were found within the ranges of 2.35-3.46% and 3.30-3.70%, respectively. These results signify promising potential of the in situ fabricated porous carbon fiber for SPME applications. Considering that most of the pencil graphite is made of carbon, after the carbonization of the Cu-BDC MOF@PG fiber, a unified porous carbon fiber is obtained. Compared to other reported procedures, in situ direct carbonization of Cu-BDC MOF@PG fiber was a one-step and straightforward method to fabricate carbon fiber.

Parametric study and process modeling for metronidazole removal by rhombic dodecahedron ZIF-67 crystals

Metronidazole (MNZ) is an extensively used antibiotic against bacterial infections for humans and farm animals. Prevention of antibiotics discharge is essential to prevent adverse environmental and health impacts. A member of metal-organic frameworks, zeolite imidazole framework-67 with cobalt sulfate precursor (ZIF-67-SO4) and exceptional physio-chemical properties was prepared via room temperature precipitation to adsorb MNZ. The study framework was designed by Box-Behnken Design to evaluate the effect of pH, ZIF-67-SO4 dose, and contact time on adsorption efficiency. The polynomial model fitted the adsorption system indicated the optimal condition for 97% MNZ removal occurs at pH = 7, adsorbent dosage = 1 g/L, and mixing time = 60 min. The model also revealed that the removal increased with contact time and decreased at strong pH. Equilibrium and kinetic study also indicated the adsorption of MNZ followed the intra-particle diffusion model and the Langmuir isotherm model with a qmax = 63.03 mg/g. The insignificant loss in removal efficacy in use-reuse adsorption cycles reflected the practical viability of ZIF-67-SO4.

Novel ZIF-67-derived Co@CNTs nanocomposites as effective adsorbents for removal of tetracycline and sulfadiazine antibiotics

Tetracycline (TCC) and sulfadiazine (SDZ) are two of the most consumed antibiotics for human therapies and bacterial infection treatments in aquafarming fields, but their accumulative residues can result in negative effects on water and aquatic microorganisms. Removal techniques are therefore required to purify water before use. Herein, we concentrate on adsorptive removal of TCC and SDZ using cobalt@carbon nanotubes (Co@CNTs) derived from Co-ZIF-67. The presence of CNTs on the edge of nanocomposites was observed. Taguchi orthogonal array was designed with four variables including initial concentration (5-20 mg L^-1), dosage (0.05-0.2 g L^-1), time (60-240 min), and pH (2-10). Concentration and pH were found to be main contributors to adsorption of tetracycline and sulfadiazine, respectively. The optimum condition was found at concentration 5 mg L^-1, dosage 0.2 g L^-1, contact time 240 min, and pH 7 for both TCC and SDZ removals. Confirmation tests showed that Co@CNTs-700 removed 99.6% of TCC and 97.3% of SDZ with small errors (3-5.5%). Moreover, the kinetic and isotherm were studied, which kinetic and isotherm data were best fitted with pseudo second-order model and Langmuir. Maximum adsorption capacity values for TCC and SDZ were determined at 118.4-174.1 mg g^-1 for 180 min. We also proposed the main role of interactions such as hydrogen bonding, π-π stacking, and electrostatic attraction in the adsorption of antibiotics. With high adsorption performance, Co@CNTs-700 is expected to remove antibiotics efficiently from wastewater.

Rapid adsorption of triclosan and p-chloro-m-xylenol by nitrogen-doped magnetic porous carbon

Contamination of water resources with organic substances like phenolic fungicides is undesirable due to the improvement of living standards, the huge production of chemicals, the heavy consumption of daily chemical products, and the growth of the population. In this study, Co-based zeolitic imidazole framework-67 (ZIF-67(Co)) was synthesized using the "one-pot method," and the best Co-based N-doped magnetic porous carbon (Co-NPC) was prepared by ZIF-67(Co) carbonization in an atmosphere of N₂. The materials were tested using an X-ray diffractometer (XRD), scanning electron microscope (SEM), infrared spectroscopy (IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), N₂ adsorption-desorption, and magnetization analysis. These characterizations indicated that the Co-NPC was successfully prepared. With the original morphology of ZIF-67(Co) crystals, the Co-NPC also has good porosity, magnetic properties, and a large specific surface area. In water, Co-NPC-800 has a good adsorption capacity for triclosan (TCS) and p-chloro-m-xylenol (PCMX), which are kinds of aromatic fungicides. The adsorption of Co-NPC-800 on both reached equilibrium within 3 min, which is in accordance with the quasi-second-order kinetic model. At 298 K, the maximum adsorption capacity of Co-NPC-800 for TCS and PCMX was 163 and 39 mg·g^-1, respectively. The adsorption of TCS and PCMX by Co-NPC-800 is a spontaneous endothermic process with reduced entropy. The combination of Co-NPC-800 and phenols come from multiple actions of electrostatic, π-π, and hydrogen bond effects. Moreover, Co-NPC-800 can be regenerated through simple washing and can be reused at least three times by a magnet. The Co-NPC-800 has good porosity, large specific surface area, comparable adsorption capacity, rapid adsorption time, so it could be broadly used in sewage treatments and other environmental fields.

Covalent triazine-based frameworks for efficient solid-phase microextraction of phthalic acid esters from food-contacted plastics

Owing to various health threats associated with phthalic acid esters (PAEs), this category of endocrine-disrupting compounds has attracted more and more public scrutiny. However, the efficient preconcentration of PAEs from complex food-contacted plastics still remains challenging. Herein, three covalent triazine-based frameworks (CTFs) were constructed by facile Friedel-Crafts reactions of cyanuric chloride (CC), with triptycene (TPC), fluorene (FL) and 1,3,5-triphenylbenzene (TPB), respectively. Three CTFs were then employed as solid-phase microextraction (SPME) coatings for the extraction of PAEs. Benefiting from the large surface area and high pore volume, the newly-synthesized CC-TPC based SPME method exhibited large enrichment factors (978-2210), low limits of detection (0.027-0.10 ng g ^- 1), satisfactory linear ranges (0.09-20 ng g ^- 1), acceptable repeatabilities (4.3-9.6%) and high relative recoveries (92.0-104.6%).

Utilization of montmorillonite nanocomposite incorporated with natural biopolymers and benzyl functionalized dicationic imidazolium based ionic liquid coated fiber for solid-phase microextraction of organochlorine pesticides prior to GC/MS and GC/ECD

A novel montmorillonite clay (MMT) bionanocomposite modified with chitosan (CH), carboxymethyl cellulose (CMC), and benzylimidazolium based dicationic ionic liquid with tetraethylene glycol linker (DIL) was fabricated on stainless steel wire by in situ process. The MMT-CH-CMC-DIL coated solid-phase microextraction (SPME) fiber was examined for the determination of organochlorine pesticides (OCPs) in real samples by HS-SPME-GC method using mass spectrometry (MS) and electron capture detector (ECD). Under optimized conditions, the proposed method exhibited low limits of detection (0.5 ng L^-1 with MS and 0.1 ng L^-1 with ECD detection), good linearities (R² = 0.9972-0.9993 with MS and 0.9987-0.9998 with ECD detection), favorable single-fiber repeatability, and fiber-to-fiber reproducibility (less than 8.2% and 9.9% for both types of detection) and high reusability around 125 cycles. Recovery studies were carried out for OCPs in tap water, green tea, and milk samples to verify the applicability of the developed SPME-GC method.

[Research progress in application of metal-organic framework-derived materials to sample pretreatment]

Sample pretreatment technology plays a vital role throughout the analysis of complex samples. Sample pretreatment can not only increase the concentration of trace targets in the sample, but also effectively eliminate interference from the sample matrix in instrumental analysis. Adsorbent materials are a key component of sample pretreatment technology. Therefore, the development of efficient and stable new adsorbent materials has acquired significance in research on pretreatment technology. Porous materials are advantageous for use in diverse applications, such as in adsorbents, when they possess controllable nanostructures, a tailored pore surface chemistry, and abundant porosity, and are inexpensive. Particularly in recent years, porous materials derived from metal-organic frameworks (MOFs) feature excellent properties, such as diverse morphology and structure, adjustable pore size, high specific surface area, good thermal stability, and chemical resistance. MOF-derived materials, when used as adsorbents for sample pretreatment, offer the following advantages: (1) The porous materials derived from MOFs typically possess a larger specific surface area than other porous materials. This characteristic is beneficial to improve the extraction capacity and extraction efficiency via an increase in the contact area between the materials and targets; (2) The microscopic porous structure of MOF-derived materials can be easily tuned (by controlling the temperature and time during pyrolysis, gas atmosphere, and heating rate), which is conducive to improve the selectivity of sample pretreatment methods; (3) The metal active sites can be evenly distributed. Owing to the ordered distribution of metal ions in the precursor MOFs and a good periodic framework structure, the metal active sites of the derivatives formed can still maintain a corresponding distance. These metal active sites will not form agglomerates and affect the extraction performance; conversely, other porous materials often require extremely complicated processes to achieve a uniform distribution; (4) Heteroatoms such as nitrogen and sulfur can be easily doped on the framework of MOF-derived porous materials. This doping enables the materials to induce additional interactions such as hydrogen bonding and π-π stacking for adsorbing target analytes. The excellent properties of MOF-derived materials make them promising for use in sample pretreatment. Novel sample pretreatment methods that use MOF-derived materials are constantly being developed. However, the use of MOF-derived materials is limited by the complex preparation process and high production cost of MOF precursors, along with difficulties in mass production. Further, the precise design or functionalization of MOF-derived materials according to the characteristics of targets is a new direction with immense challenges as well as application potential. This review summarizes the application of MOF-derived materials in sample pretreatment methods, including dispersive solid phase extraction (dSPE), magnetic solid phase extraction (MSPE), solid phase microextraction (SPME), stir bar sorptive extraction (SBSE), and dispersive micro solid phase extraction (DMSPE). The preparation methods, functional control, and enrichment efficiencies of various MOF-derived materials are also reviewed. Finally, the application prospects of MOF-derived materials in sample pretreatment are discussed to provide a clear outlook and reference for further related research.

Zeolitic imidazolate frameworks in analytical sample preparation

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.

Magnetic porous carbons derived from cobalt(ii)-based metal–organic frameworks for the solid-phase extraction of sulfonamides

A highly porous magnetic C/Co-SIM-1 carbon obtained via a simple carbonization process as a promising material for the simultaneous extraction of sulfonamides.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.

Synthesis of nanoporous poly-melamine-formaldehyde (PMF) based on Schiff base chemistry as a highly efficient adsorbent

This study proposes the construction of nanoporous poly-melamine-formaldehyde (PMF) through the Schiff base condensation reaction of paraformaldehyde and melamine. The PMF nanoparticles showed a good adsorption capability to some benzene-ring-containing dyes including acid fuchsine, nigrosine, and methyl orange. Moreover, the as-prepared PMF nanoparticles were employed as the coating adsorbent for the solid-phase microextraction (SPME) of seven volatile fatty acids (VFAs) with high enrichment factors. A PMF-assisted SPME method was established for the enrichment of VFAs from environmental water samples with satisfactory recoveries (88.5%-102.0%) and acceptable precisions (relative standard deviations <10.9%). This contribution might furnish an advanced benchmark for the exploitation of new porous organic polymers as the effective adsorbents for SPME or other fields of utilization.

Metal-Organic Framework-Derived Hollow Carbon Nanocubes for Fast Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Developing novel coating materials for fast and sensitive solid-phase microextraction (SPME) is highly desired but few are achieved. In this work, a new material of metal-organic framework (MOF)-derived hollow carbon nanocubes (HCNCs) was prepared as a fiber coating material for SPME. The HCNC-coated fiber (denoted as HCNCs-F) exhibited a better enrichment performance than solid carbon nanocube (SCNC)-coated fiber (denoted as SCNCs-F) and commercial fibers based on the abundant active sites of the hollow structure, hydrophobic interactions, and π-π interactions. Moreover, because of the reduced mass-transport lengths of the hollow mesoporous structure, the HCNCs-F demonstrated a faster mass transfer compared with the SCNCs-F. The HCNCs-F was used to determine the six hydrophobic polycyclic aromatic hydrocarbons (PAHs) with wide linear ranges (10-2000 ng L^-1 for naphthalene and 5-2000 ng L^-1 for the other five analytes), good reproducibility (relative standard deviation < 8.8%), and low detection limits (0.03-0.70 ng L^-1). Finally, the HCNCs-F was successfully applied for the determination of PAHs from the real water samples. It can be concluded from the results that MOF-derived hollow carbon materials are promising candidates for the fast SPME and can be used for practical applications in analytical chemistry.

Simple preparation of magnetic metal-organic frameworks composite as a "bait" for phosphoproteome research

Phosphospecific enrichment techniques and mass spectrometry (MS) are primary tools for comprehending the cellular phosphoproteome. In this work, a rational and extremely facile route to synthesize the magnetic metal-organic frameworks (mMOFs) was employed and the prepared composite was first utilized as a "bait" for selective enrichment of phosphopeptides. Typically, the mMOFs was synthesized via electrostatic self-assembly between the negatively charged Fe₃O₄ magnetic nanoparticles (MNPs) and positively charged MIL-101(Fe). The obtained Fe₃O₄/MIL-101(Fe) composite possessed well-defined structures, rough surface, highly specific surface area and excellent magnetic property. To demonstrate their ability for enrichment of phosphopeptides, we applied Fe₃O₄/MIL-101(Fe) as a "bait" to capture the phosphopeptides from standard protein digestion and practical samples. The enriched phosphopeptides were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The MS results show that the Fe₃O₄/MIL-101(Fe) exhibits superior enrichment performance for phosphopeptides with low detectable concentration assessed to be 8 fmol, selectivity investigated to be 1:1000 using β-casein/bovine serum albumin mixture and enrichment recovery evaluated to be 89.8%. Based on these excellent properties, the prepared composite was used to enrich the phosphopeptides from tilapia eggs biological samples for the first time. A total number of 51 phosphorylation sites were identified from the digest of tilapia eggs proteins, suggesting the excellent potential of Fe₃O₄/MIL-101(Fe) composite in the practical application.

A nanoporous carbon material derived from pomelo peels as a fiber coating for solid-phase microextraction

A novel nanoporous carbon derived from a biomass source was prepared and used as an SPME fiber coating.