Dioxygen activation and two consecutive oxidative decarboxylations of phenylpyruvate by nonheme iron(II) complexes: functional models of hydroxymandelate synthase (HMS) and CloR

Iron(II)-α-keto acid complexes of tridentate ligands on gold nanoparticles: the effect of ligand geometry and immobilization on their dioxygen-dependent reactivity

Two mononuclear nonheme iron(II)-benzoylformate (BF) complexes [(6Me₂-Me-BPA)Fe(BF)](ClO₄) (1a) and [(6Me₃-TPMM)Fe(BF)](ClO₄) (1b) of tridentate nitrogen donor ligands, bis((6-methylpyridin-2-yl)methyl)(N-methyl)amine (6Me₂-Me-BPA) and tris(2-(6-methyl)pyridyl)methoxymethane (6Me₃-TPMM), were isolated and characterized. The structural characterization of iron(II)-chloro complexes indicates that the ligand 6Me₂-Me-BPA binds to the iron(II) centre in a meridional fashion, whereas 6Me₃-TPMM behaves as a facial ligand. Both the ligands were functionalized with terminal thiol for immobilization on gold nanoparticles (AuNPs), and the corresponding iron(II) complexes [(6Me₂-BPASH)Fe(BF)(ClO₄)]@C₈Au (2a) and [(6Me₃-TPMSH)Fe(BF)(ClO₄)]@C₈Au (2b) were prepared to probe the effect of immobilization on their ability to perform bioinspired oxidation reactions. All the complexes react with dioxygen to display the oxidative decarboxylation of the coordinated benzoylformate, but the complexes supported by 6Me₃-TPMM and its thiol-appended ligand display faster reactivity compared to their analogues with the 6Me₂-Me-BPA-derived ligands. In each case, an electrophilic iron-oxygen oxidant was intercepted as the active oxidant generated from dioxygen. The immobilized complexes (2a and 2b) display enhanced O₂-dependent reactivity in oxygen-atom transfer reactions (OAT) and hydrogen-atom transfer (HAT) reactions compared to their homogeneous congeners (1a and 1b). Furthermore, the immobilized complex 2b displays catalytic OAT reactions. This study supports that the ligand geometry and immobilization on AuNPs influence the dioxygen-dependent reactivity of the complexes.

Synthesis of 2-Alkylaryl and Furanyl Acetates by Palladium Catalysed Carbonylation of Alcohols

The one-pot alkoxycarbonylation of halo-free alkylaryl and furanyl alcohols represents a sustainable alternative for the synthesis of alkylaryl and furanyl acetates. In this paper, the reaction between benzyl alcohol, chosen as a model substrate, CH3OH and CO was tested in the presence of a homogeneous palladium catalyst, an activator (isopropenyl acetate (IPAc) or dimethyl carbonate (DMC)) and a base (Cs2CO3). The influence of various reaction parameters such as the CO pressure, ligand and palladium precursor employed, mmol% catalyst load, temperature and time were investigated. The results demonstrate that decreasing the CO pressure from 50 bar to 5 bar at 130 °C for 18 h increases yields in benzyl acetate from 36% to over 98%. Further experiments were performed in the presence of piperonyl and furfuryl alcohol, interesting substrates employed for the synthesis of various fine chemicals. Moreover, furfuryl alcohol is a lignocellulosic-derived building block employed for the synthesis of functionalized furans such as 2-alkylfurfuryl acetates. Both the alcohols were successfully transformed in the corresponding acetate (yields above 96%) in rather mild reaction conditions (5–0.01 mol% catalyst, 5–2 bar CO pressure, 130 °C, 4–18h), demonstrating that the alkoxycarbonylation of alcohols represents a promising sustainable alternative to more impactful industrial practices adopted to date for the synthesis of alkylaryl and furfuryl acetates.

Dioxygen Activation and Mandelate Decarboxylation by Iron(II) Complexes of N4 Ligands: Evidence for Dioxygen-Derived Intermediates from Cobalt Analogues

The isolation, characterization, and dioxygen reactivity of monomeric [(TPA)M^II(mandelate)]⁺ (M = Fe, 1; Co, 3) and dimeric [(BPMEN)₂M^II₂(μ-mandelate)₂]²⁺ (M = Fe, 2; Co, 4) (TPA = tris(2-pyridylmethyl)amine and BPMEN = N¹,N²-dimethyl-N¹,N²-bis(pyridin-2-yl-methyl)ethane-1,2-diamine) complexes are reported. The iron(II)- and cobalt(II)-mandelate complexes react with dioxygen to afford benzaldehyde and benzoic acid in a 1:1 ratio. In the reactions, one oxygen atom from dioxygen is incorporated into benzoic acid, but benzaldehyde does not derive any oxygen atom from dioxygen. While no O₂-derived intermediate is observed with the iron(II)-mandelate complexes, the analogous cobalt(II) complexes react with dioxygen at a low temperature (-80 °C) to generate the corresponding cobalt(III)-superoxo species (S), a key intermediate implicated in the initiation of mandelate decarboxylation. At -20 °C, the cobalt(II)-mandelate complexes bind dioxygen reversibly leading to the formation of μ-1,2-peroxo-dicobalt(III)-mandelate species (P). The geometric and electronic structures of the O₂-derived intermediates (S and P) have been established by computational studies. The intermediates S and P upon treatment with a protic acid undergo decarboxylation to afford benzaldehyde (50%) with a concomitant formation of the corresponding μ-1,2-peroxo-μ-mandelate-dicobalt(III) (P1) species. The crystal structure of a peroxide species isolated from the cobalt(II)-carboxylate complex [(TPA)Co^II(MPA)]⁺ (5) (MPA = 2-methoxyphenylacetate) supports the composition of P1. The observations of the dioxygen-derived intermediates from cobalt complexes and their electronic structure analyses not only provide information about the nature of active species involved in the decarboxylation of mandelate but also shed light on the mechanistic pathway of two-electron versus four-electron reduction of dioxygen.

Tuning the stereoelectronic factors of iron(II)-2-aminophenolate complexes for the reaction with dioxygen: oxygenolytic C-C bond cleavage vs. oxidation of complex

Oxidative C-C bond cleavage of 2-aminophenols mediated by transition metals and dioxygen is a topic of great interest. While the oxygenolytic C-C bond cleavage reaction relies on the inherent redox non-innocent property of 2-aminophenols, the metal complexes of 2-aminophenolates often undergo 1e-/2e- oxidation events (metal or ligand oxidation), instead of the direct addition of O2 for subsequent C-C bond cleavage. In this work, we report the isolation, characterization and dioxygen reactivity of a series of ternary iron(ii)-2-aminophenolate complexes [(TpPh,Me)FeII(X)], where X = 2-amino-4-tert-butylphenolate (4-tBu-HAP) (1); X = 2-amino-4,6-di-tert-butylphenolate (4,6-di-tBu-HAP) (2); X = 2-amino-4-nitrophenolate (4-NO2-HAP)(3); and X = 2-anilino-4,6-di-tert-butylphenolate (NH-Ph-4,6-di-tBu-HAP) (4) supported by a facial tridentate nitrogen donor ligand (TpPh,Me = hydrotris(3-phenyl-5-methylpyrazol-1-yl)borate). Another facial N3 ligand (TpPh2 = hydrotris(3,5-diphenyl-pyrazol-1-yl)borate) has been used to isolate an iron(ii)-2-anilino-4,6-di-tert-butylphenolate complex (5) for comparison. Both [(TpPh,Me)FeII(4-tBu-HAP)] (1) and [(TpPh,Me)FeII(4,6-di-tBu-HAP)] (2) undergo regioselective oxidative aromatic ring fission reaction of the coordinated 2-aminophenols to the corresponding 2-picolinic acids in the reaction with dioxygen. In contrast, complex [(TpPh,Me)FeII(4-NO2-HAP)] (3) displays metal based oxidation to form an iron(iii)-2-amidophenolate complex. Complexes [(TpPh,Me)FeII(NH-Ph-4,6-di-tBu-HAP)] (4) and [(TpPh2)FeII(NH-Ph-4,6-di-tBu-HAP)] (5) react with dioxygen to undergo 2e- oxidation with the formation of the corresponding iron(iii)-2-iminobenzosemiquinonato radical species implicating the importance of the -NH2 group in directing the C-C bond cleavage reactivity of 2-aminophenols. The systematic study presented in this work unravels the effect of the electronic and structural properties of the redox non-innocent 2-aminophenolate ring and the supporting ligand on the C-C bond cleavage reactivity vs. the metal/ligand oxidation of the complexes. The study further reveals that proper modulation of the stereoelectronic factors enables us to design a well synchronised proton transfer (PT) and dioxygen binding events for complexes 1 and 2 that mimic the structure and function of the nonheme enzyme 2-aminophenol-1,6-dioxygenase (APD).

Go it alone: four-electron oxidations by mononuclear non-heme iron enzymes

This review discusses the current mechanistic understanding of a group of mononuclear non-heme iron-dependent enzymes that catalyze four-electron oxidation of their organic substrates without the use of any cofactors or cosubstrates. One set of enzymes acts on α-ketoacid-containing substrates, coupling decarboxylation to oxygen activation. This group includes 4-hydroxyphenylpyruvate dioxygenase, 4-hydroxymandelate synthase, and CloR involved in clorobiocin biosynthesis. A second set of enzymes acts on substrates containing a thiol group that coordinates to the iron. This group is comprised of isopenicillin N synthase, thiol dioxygenases, and enzymes involved in the biosynthesis of ergothioneine and ovothiol. The final group of enzymes includes HEPD and MPnS that both carry out the oxidative cleavage of the carbon-carbon bond of 2-hydroxyethylphosphonate but generate different products. Commonalities amongst many of these enzymes are discussed and include the initial substrate oxidation by a ferric-superoxo-intermediate and a second oxidation by a ferryl species.

Aerobic alcohol oxidation and oxygen atom transfer reactions catalyzed by a nonheme iron(ii)-α-keto acid complex

An iron(ii)-benzoylformate complex of a monoanionic facial tridentate ligand catalyzes the aerobic oxidation of sulfides to sulfoxides, alkenes to epoxides, and alcohols to the corresponding carbonyl compounds.

α-Ketoglutarate-dependent enzymes catalyze many important biological oxidation/oxygenation reactions. Iron(iv)–oxo intermediates have been established as key oxidants in these oxidation reactions. While most reported model iron(ii)–α-keto acid complexes exhibit stoichiometric reactivity, selective oxidation of substrates with dioxygen catalyzed by biomimetic iron(ii)–α-keto acid complexes remains unexplored. In this direction, we have investigated the ability of an iron(ii) complex [(Tp^Ph,Me)Fe^II(BF)] (1) (Tp^Ph,Me = hydrotris(3-phenyl-5-methylpyrazolyl)borate and BF = monoanionic benzoylformate) to catalyze the aerobic oxidation of organic substrates. An iron–oxo oxidant, intercepted in the reaction of 1 with O₂, selectively oxidizes sulfides to sulfoxides, alkenes to epoxides, and alcohols to the corresponding carbonyl compounds. The oxidant from 1 is able to hydroxylate the benzylic carbon of phenylacetic acid to afford mandelic acid with the incorporation of one oxygen atom from O₂ into the product. The iron(ii)–benzoylformate complex oxidatively converts phenoxyacetic acids to the corresponding phenols, thereby mimicking the function of iron(ii)–α-ketoglutarate-dependent 2,4-dichlorophenoxyacetate dioxygenase (TfdA). Furthermore, complex 1 exhibits catalytic aerobic oxidation of alcohols and oxygen atom transfer reactions with multiple turnovers.