An enhanced ascorbate peroxidase 2/antibody-binding domain fusion protein (APEX2-ABD) as a recombinant target-specific signal amplifier

Development of recombinant secondary antibody mimics (rSAMs) for immunoassays through genetic fusion of monomeric alkaline phosphatase with antibody binders

In conventional immunoassays, a secondary antibody is used to amplify the signal generated by the binding of the primary antibody to the target analyte. Due to concerns regarding animal use and cost-inefficiency of secondary antibody productions, there is a significant demand for the development of recombinant secondary antibody mimics (rSAMs). Here, we developed rSAMs using a signal-generating enzyme, monomeric alkaline phosphatase (mALP), and antibody-binders, including monomeric streptavidin (mSA2) and mouse IgG1- or rabbit IgG-binding nanobodies (MG1Nb or RNb). The mALP-MG1Nb, mALP-RNb, and mALP-mSA2 were genetically constructed and produced in large quantities using bacterial overexpression systems, which reduced manufacturing costs and time without the use of animals. Each rSAM exhibited high and selective binding to its respective primary antibody, generating linear band signals corresponding to the amounts of target analytes in western blots. The rSAMs also successfully generated sigmoidal signal curves that increased as the sample concentration increased. Moreover, they generated stronger signals than conventional ALP-conjugated secondary antibodies and SA, particularly in the medium to high sample concentration range, in both indirect and sandwich-type indirect ELISAs at the same sample concentration. The rSAMs we developed here may provide new insights to develop novel immunoassay-based analytical and diagnostic tools.

Surface protein-retractive and redox-degradable mesoporous organosilica nanoparticles for enhanced cancer therapy

Targeted delivery along with controlled drug release is considered crucial in development of a drug delivery system (DDS) for efficient cancer treatment. In this paper, we present a strategy to obtain such a DDS by utilizing disulfide-incorporated mesoporous organosilica nanoparticles (MONs), which were engineered to minimize the surface interactions with proteins for better targeting and therapeutic performance. That is, after MONs were loaded with a chemodrug doxorubicin (DOX) through the inner pores, their outer surface was treated for conjugation to the glutathione-S-transferase (GST)-fused cell-specific affibody (Afb) (GST-Afb). These particles exhibited prompt responsivity to the SS bond-dissociating glutathione (GSH), which resulted in considerable degradation of the initial particle morphology and DOX release. As the protein adsorption to the MON surface appeared largely reduced, their targeting ability with GSH-stimulated therapeutic activities was demonstrated in vitro by employing two kinds of the GST-Afb protein, which target human cancer cells with the surface membrane receptor, HER2 or EGFR. Compared with unmodified control particles, the presented results show that our system can significantly enhance cancer-therapeutic outcomes of the loaded drug, offering a promising way of designing a more efficacious DDS.

Mapping Interactions between Glycans and Glycan-Binding Proteins by Live Cell Proximity Tagging

Interactions between glycans and glycan-binding proteins (GBPs) consist of weak, noncovalent, and transient binding events, making them difficult to study in live cells void of a static, isolated system. Furthermore, the glycans are often presented as protein glycoconjugates, but there are limited efforts to identify these proteins. Proximity labeling permits covalent tagging of the glycoprotein interactors to query GBP in live cells. Coupled with high-resolution mass spectrometry, it facilitates determination of the proteins bearing the interacting glycans. In this method, fusion protein constructs of a GBP of interest with a peroxidase enzyme allows for in situ spatiotemporal radical-mediated tagging of interacting glycoproteins in living cells that can be enriched for identification. Using this method, the capture and study of glycan-GBP interactions no longer relies on weak, transient interactions, and results in robust capture and identification of the interactome of a GBP while preserving the native cellular environment. This protocol focuses on (1) expression and characterization of a recombinant fusion protein consisting of a peroxidase and the GBP galectin-3, (2) corresponding in situ labeling and visualization of interactors, (3) and proteomic workflow and analysis of captured proteins for robust identification using mass spectrometry. © 2021 Wiley Periodicals LLC. Basic Protocol 1: Expression, purification, and characterization of recombinant fusion protein Alternate Protocol 1: Manual Ni-NTA purification of recombinant fusion protein Basic Protocol 2: In situ proximity labeling and evaluation by fluorescence microscopy Alternate Protocol 2: Western blot analysis of in situ proximity labeling Basic Protocol 3: Proximity labeling of cells for quantitative MS-based proteomics with tandem mass tags.

Development of Recombinant Immunoglobulin G-Binding Luciferase-Based Signal Amplifiers in Immunoassays

In general immunoassays, secondary antibodies are covalently linked with enzymes and bind to the Fc region of target-bound primary antibodies to amplify signals of low-abundant target molecules. The antibodies themselves are obtained from large mammals and are further modified with enzymes. In this study, we developed novel recombinant immunoglobulin G (IgG)-binding luciferase-based signal amplifiers (rILSAs) by genetically fusing luciferase (Nluc) with antimouse IgG1 nanobody (MG1Nb) and antibody-binding domain (ABD), individually or together, in a mix-and-match manner. We obtained three different highly pure rILSAs in large quantities using a bacterial overexpression system and one-step purification. Mouse-specific rILSA, MG1Nb-Nluc, and rabbit-specific rILSA, Nluc-ABD, selectively bound to target-molecule-bound mouse IgG1 and rabbit IgG primary antibodies, whereas the bispecific rILSA, MG1Nb-Nluc-ABD, mutually bound to both mouse IgG1 and rabbit IgG primary antibodies. All rILSAs exhibited an outstanding signal-amplifying capability comparable to those of conventional horseradish-peroxidase-conjugated secondary antibodies, regardless of the target molecules, in various immunoassay formats, such as enzyme-linked immunosorbent assay, Western blot, and lateral flow assays. Each rILSA was selected for its own individual purpose and applied to various types of target analytes, in combination with a variety of target-specific primary antibodies, effectively minimizing the use of animals as well as reducing the costs and time associated with the production and chemical conjugation of signal-amplifying enzymes.

Ultrastructure of light-activated axons following optogenetic stimulation to produce late-phase long-term potentiation

Analysis of neuronal compartments has revealed many state-dependent changes in geometry but establishing synapse-specific mechanisms at the nanoscale has proven elusive. We co-expressed channelrhodopsin2-GFP and mAPEX2 in a subset of hippocampal CA3 neurons and used trains of light to induce late-phase long-term potentiation (L-LTP) in area CA1. L-LTP was shown to be specific to the labeled axons by severing CA3 inputs, which prevented back-propagating recruitment of unlabeled axons. Membrane-associated mAPEX2 tolerated microwave-enhanced chemical fixation and drove tyramide signal amplification to deposit Alexa Fluor dyes in the light-activated axons. Subsequent post-embedding immunogold labeling resulted in outstanding ultrastructure and clear distinctions between labeled (activated), and unlabeled axons without obscuring subcellular organelles. The gold-labeled axons in potentiated slices were reconstructed through serial section electron microscopy; presynaptic vesicles and other constituents could be quantified unambiguously. The genetic specification, reliable physiology, and compatibility with established methods for ultrastructural preservation make this an ideal approach to link synapse ultrastructure and function in intact circuits.

Protein Chemical Labeling Using Biomimetic Radical Chemistry

Chemical labeling of proteins with synthetic low-molecular-weight probes is an important technique in chemical biology. To achieve this, it is necessary to use chemical reactions that proceed rapidly under physiological conditions (i.e., aqueous solvent, pH, low concentration, and low temperature) so that protein denaturation does not occur. The radical reaction satisfies such demands of protein labeling, and protein labeling using the biomimetic radical reaction has recently attracted attention. The biomimetic radical reaction enables selective labeling of the C-terminus, tyrosine, and tryptophan, which is difficult to achieve with conventional electrophilic protein labeling. In addition, as the radical reaction proceeds selectively in close proximity to the catalyst, it can be applied to the analysis of protein–protein interactions. In this review, recent trends in protein labeling using biomimetic radical reactions are discussed.

Periplasmic Nanobody-APEX2 Fusions Enable Facile Visualization of Ebola, Marburg, and Mĕnglà virus Nucleoproteins, Alluding to Similar Antigenic Landscapes among Marburgvirus and Dianlovirus

We explore evolved soybean ascorbate peroxidase (APEX2) as a reporter when fused to the C-termini of llama nanobodies (single-domain antibodies, sdAb; variable domains of heavy chain-only antibodies, VHH) targeted to the E. coli periplasm. Periplasmic expression preserves authentic antibody N-termini, intra-domain disulphide bond(s), and capitalizes on efficient haem loading through the porous E. coli outer membrane. Using monomeric and dimeric anti-nucleoprotein (NP) sdAb cross-reactive within the Marburgvirus genus and cross-reactive within the Ebolavirus genus, we show that periplasmic sdAb–APEX2 fusion proteins are easily purified at multi-mg amounts. The fusions were used in Western blotting, ELISA, and microscopy to visualize NPs using colorimetric and fluorescent imaging. Dimeric sdAb–APEX2 fusions were superior at binding NPs from viruses that were evolutionarily distant to that originally used to select the sdAb. Partial conservation of the anti-Marburgvirus sdAb epitope enabled the recognition of a novel NP encoded by the recently discovered Mĕnglà virus genome. Antibody–antigen interactions were rationalized using monovalent nanoluciferase titrations and contact mapping analysis of existing crystal structures, while molecular modelling was used to reveal the potential landscape of the Mĕnglà NP C-terminal domain. The sdAb–APEX2 fusions also enabled live Marburgvirus and Ebolavirus detection 24 h post-infection of Vero E6 cells within a BSL-4 laboratory setting. The simple and inexpensive mining of large amounts of periplasmic sdAb–APEX2 fusion proteins should help advance studies of past, contemporary, and perhaps Filovirus species yet to be discovered.

Electron microscopy using the genetically encoded APEX2 tag in cultured mammalian cells

Electron microscopy (EM) is the premiere technique for high-resolution imaging of cellular ultrastructure. Unambiguous identification of specific proteins or cellular compartments in electron micrographs, however, remains challenging because of difficulties in delivering electron-dense contrast agents to specific subcellular targets within intact cells. We recently reported enhanced ascorbate peroxidase 2 (APEX2) as a broadly applicable genetic tag that generates EM contrast on a specific protein or subcellular compartment of interest. This protocol provides guidelines for designing and validating APEX2 fusion constructs, along with detailed instructions for cell culture, transfection, fixation, heavy-metal staining, embedding in resin, and EM imaging. Although this protocol focuses on EM in cultured mammalian cells, APEX2 is applicable to many cell types and contexts, including intact tissues and organisms, and is useful for numerous applications beyond EM, including live-cell proteomic mapping. This protocol, which describes procedures for sample preparation from cell monolayers and cell pellets, can be completed in 10 d, including time for APEX2 fusion construct validation, cell growth, and solidification of embedding resins. Notably, the only additional steps required relative to a standard EM sample preparation are cell transfection and a 2- to 45-min staining period with 3,3-diaminobenzidine (DAB) and hydrogen peroxide (H₂O₂).

RAC-tagging: Recombineering And Cas9-assisted targeting for protein tagging and conditional analyses

A fluent method for gene targeting to establish protein tagged and ligand inducible conditional loss-of-function alleles is described. We couple new recombineering applications for one-step cloning of gRNA oligonucleotides and rapid generation of short-arm (~1 kb) targeting constructs with the power of Cas9-assisted targeting to establish protein tagged alleles in embryonic stem cells at high efficiency. RAC (Recombineering And Cas9)-tagging with Venus, BirM, APEX2 and the auxin degron is facilitated by a recombineering-ready plasmid series that permits the reuse of gene-specific reagents to insert different tags. Here we focus on protein tagging with the auxin degron because it is a ligand-regulated loss-of-function strategy that is rapid and reversible. Furthermore it includes the additional challenge of biallelic targeting. Despite high frequencies of monoallelic RAC-targeting, we found that simultaneous biallelic targeting benefits from long-arm (>4 kb) targeting constructs. Consequently an updated recombineering pipeline for fluent generation of long arm targeting constructs is also presented.

A Recombinant Secondary Antibody Mimic as a Target-specific Signal Amplifier and an Antibody Immobilizer in Immunoassays

We construct a novel recombinant secondary antibody mimic, GST-ABD, which can bind to the Fc regions of target-bound primary antibodies and acquire multiple HRPs simultaneously. We produce it in tenth of mg quantities with a bacterial overexpression system and simple purification procedures, significantly reducing the manufacturing cost and time without the use of animals. GST-ABD is effectively conjugated with 3 HRPs per molecule on an average and selectively bind to the Fc region of primary antibodies derived from three different species (mouse, rabbit, and rat). HRP-conjugated GST-ABD (HRP-GST-ABD) is successfully used as an alternative to secondary antibodies to amplify target-specific signals in both ELISA and immunohistochemistry regardless of the target molecules and origin of primary antibodies used. GST-ABD also successfully serves as an anchoring adaptor on the surface of GSH-coated plates for immobilizing antigen-capturing antibodies in an orientation-controlled manner for sandwich-type indirect ELISA through simple molecular recognition without any complicated chemical modification.

Development of an antibody-binding modular nanoplatform for antibody-guided targeted cell imaging and delivery

A polyvalent antibody-binding lumazine synthase protein cage nanoparticle (ABD–AaLS) is constructed by genetically fusing lumazine synthase and antibody-binding domains. ABD–AaLS effectively displays targeting antibodies in an orientation-controlled manner.

Plug-and-playable fluorescent cell imaging modular toolkits using the bacterial superglue, SpyTag/SpyCatcher

Simple plug-and-playable fluorescent cell imaging modular toolkits are established and target cells are visualized with selective colors on demand.