A Novel Quantum Dot-Based pH Probe for Long-Term Fluorescence Lifetime Imaging Microscopy Experiments in Living Cells

The use of two nanoparticles for quantitative pH measurements in live cells by means of fluorescence lifetime imaging microscopy (FLIM) is investigated here. These nanoparticles are based on CdSe/ZnS quantum dots (QDs), functionalized with N-acetylcysteine (CdSe/ZnS-A) and with a small peptide containing D-penicillamine and histidine (CdSe/ZnS-PH). CdSe/ZnS-A has tendency to aggregate and nonlinear pH sensitivity in a complex medium containing salts and macromolecules. On the contrary, CdSe/ZnS-PH shows chemical stability, low toxicity, efficient uptake in C3H10T1/2 cells, and good performance as an FLIM probe. CdSe/ZnS-PH also has key advantages over a recently reported probe based on a CdSe/ZnS QD functionalized with D-penicillamine (longer lifetimes and higher pH-sensitivity). A pH(±2σ) of 6.97 ± 0.14 was determined for C3H10T1/2 cells by FLIM employing this nanoprobe. In addition, the fluorescence lifetime signal remains nearly constant for C3H10T1/2 cells treated with CdSe/ZnS-PH for 24 h. These results show the promising applications of this nanoprobe to monitor the intracellular pH and cell state employing the FLIM technique.

Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications

This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.

Lanthanide-Based Optical Probes of Biological Systems

The unique photophysical properties of lanthanides, such as europium, terbium, and ytterbium, make them versatile molecular probes of biological systems. In particular, their long-lived photoluminescence, narrow bandwidth emissions, and large Stokes shifts enable experiments that are infeasible with organic fluorophores and fluorescent proteins. The ability of these metal ions to undergo luminescence resonance energy transfer, and photon upconversion further expands the capabilities of lanthanide probes. In this review, we describe recent advances in the design of lanthanide luminophores and their application in biological research. We also summarize the latest detection systems that have been developed to fully exploit the optical properties of lanthanide luminophores. We conclude with a discussion of remaining challenges and new frontiers in lanthanide technologies. The unprecedented levels of sensitivity and multiplexing afforded by rare-earth elements illustrate how chemistry can enable new approaches in biology.

Nanomedicines for Near-Infrared Fluorescent Lifetime-Based Bioimaging

Nanomedicines refer to the application of nanotechnology in disease diagnosis, treatment, and monitoring. Bioimaging provides crucial biological information for disease diagnosis and treatment monitoring. Fluorescent bioimaging shows the advantages of good contrast and a vast variety of signal readouts and yet suffers from imaging depth due to the background noise from the autofluorescence of tissue and light scattering. Near-infrared fluorescent lifetime bioimaging (NIR- FLTB) suppresses such background noises and significantly improves signal-to-background ratio. This article gives an overview of recent advances in NIR- FLTB using organic compounds and nanomaterials as contrast agent (CA). The advantages and disadvantages of each CA are discussed in detail. We survey relevant reports about NIR-FLTB in recent years and summarize important findings or progresses. In addition, emerging hybrid bioimaging techniques are introduced, such as ultrasound-modulated FLTB. The challenges and an outlook for NIR- FLTB development are discussed at the end, aiming to provide references and inspire new ideas for future nanomedicine development.

A Quantum Dot-Based FLIM Glucose Nanosensor

In the last few years, quantum dot (QD) nanoparticles have been employed for bioimaging and sensing due to their excellent optical features. Most studies have used photoluminescence (PL) intensity-based techniques, which have some drawbacks, especially when working with nanoparticles in intracellular media, such as fluctuations in the excitation power, fluorophore concentration dependence, or interference from cell autofluorescence. Some of those limitations can be overcome with the use of time-resolved spectroscopy and fluorescence lifetime imaging microscopy (FLIM) techniques. In this work, CdSe/ZnS QDs with long decay times were modified with aminophenylboronic acid (APBA) to achieve QD-APBA conjugates, which can act as glucose nanosensors. The attachment of the boronic acid moiety on the surface of the nanoparticle quenched the PL average lifetime of the QDs. When glucose bonded to the boronic acid, the PL was recovered and its lifetime was enhanced. The nanosensors were satisfactorily applied to the detection of glucose into MDA-MB-231 cells with FLIM. The long PL lifetimes of the QD nanoparticles made them easily discernible from cell autofluorescence, thereby improving selectivity in their sensing applications. Since the intracellular levels of glucose are related to the metabolic status of cancer cells, the proposed nanosensors could potentially be used in cancer diagnosis.

A smartphone-coalesced nanoprobe for high selective ammonia sensing based on the pH-responsive biomass carbon nanodots and headspace single drop microextraction

Ammonia concentration together with pH values are important and closely linked indexes for aqueous systems. Rapid on-site determination of ammonia or pH is of great significance to environmental monitoring. In this work, a pH-switchable nanoprobe based on biomass carbon dots (CDs) is developed using a smartphone as a simple and handy instrument. The CDs demonstrate sensitive pH response in wide linear ranges of 6.1-13.6, and 2.0-13.6 with colorimetric and fluorescent channels, respectively. It is the pH-induced aggregation that governs the color and fluorescence switch. With the pH evolution caused by the dissolution of ammonia, the smartphone-integrated nanoprobe is applied to ammonia detection with a broad range of 0.5-300 mM. Moreover, the headspace single drop microextraction strategy can concentrate ammonia from matrix, offering a remarkably high selectivity for ammonia determination. Finally, the practical applications of this method for ammonia analysis obtained satisfactory results.

Background-Free Fluorescence-Decay-Time Sensing and Imaging of pH with Highly Photostable Diazaoxotriangulenium Dyes

Novel fluorescent diazaoxatriangulenium (DAOTA) pH indicators for lifetime-based self-referenced pH sensing are reported. The DAOTA dyes were decorated with phenolic-receptor groups inducing fluorescence quenching via a photoinduced-electron-transfer mechanism. Electron-withdrawing chlorine substituents ensure response in the most relevant pH range (apparent p K_a^' values of ∼5 and 7.5 for the p, p-dichlorophenol- and p-chlorophenol-substituted dyes, respectively). The dyes feature long fluorescence lifetimes (17-20 ns), high quantum yields (∼60%), and high photostabilities. Planar optodes are prepared upon immobilization of the dyes into polyurethane hydrogel D4. Apart from the response in the fluorescence intensity, the optodes show pH-dependent lifetime behavior, which makes them suitable for studying 2D pH distributions with the help of fluorescence-lifetime-imaging techniques. The lifetime response is particularly pronounced for the sensors with high dye concentrations (0.5-1 wt % with respect to the polymer) and is attributed to the efficient homo-FRET mechanism.

Single-Nanoparticle Cell Barcoding by Tunable FRET from Lanthanides to Quantum Dots

Fluorescence barcoding based on nanoparticles provides many advantages for multiparameter imaging. However, creating different concentration‐independent codes without mixing various nanoparticles and by using single‐wavelength excitation and emission for multiplexed cellular imaging is extremely challenging. Herein, we report the development of quantum dots (QDs) with two different SiO₂ shell thicknesses (6 and 12 nm) that are coated with two different lanthanide complexes (Tb and Eu). FRET from the Tb or Eu donors to the QD acceptors resulted in four distinct photoluminescence (PL) decays, which were encoded by simple time‐gated (TG) PL intensity detection in three individual temporal detection windows. The well‐defined single‐nanoparticle codes were used for live cell imaging and a one‐measurement distinction of four different cells in a single field of view. This single‐color barcoding strategy opens new opportunities for multiplexed labeling and tracking of cells.

Biodistribution studies of ultrasmall silicon nanoparticles and carbon dots in experimental rats and tumor mice

Ultrasmall clearable nanoparticles possess enormous potential as cancer imaging agents. In particular, biocompatible silicon nanoparticles (Si NPs) and carbon quantum dots (CQDs) hold great potential in this regard. Their facile surface functionalization easily allows the introduction of different labels for in vivo imaging. However, to date, a thorough biodistribution study by in vivo positron emission tomography (PET) and a comparative study of Si vs. C particles of similar size are missing. In this contribution, ultrasmall (size <5 nm) Si NPs and CQDs were synthesized and characterized by high-resolution transmission electron microscopy (HR-TEM), Fourier-transform infrared (FTIR), absorption and steady-state emission spectroscopy. Subsequent functionalization of NPs with a near-infrared dye (Kodak-XS-670) or a radiolabel (64Cu) enabled a detailed in vitro and in vivo study of the particles. For radiolabeling experiments, the bifunctional chelating agent S-2-(4-isothiocyanatobenzyl)-1,4,7-triazacyclononane-1,4,7-triacetic acid (p-SCN-Bn-NOTA) was conjugated to the amino surface groups of the respective NPs. Efficient radiolabeling of NOTA-functionalized NPs with the positron emitter 64Cu was found. The biodistribution and PET studies showed a rapid renal clearance from the in vivo systems for both variants of the nanoparticles. Interestingly, the different derivatives investigated exhibited significant differences in the biodistribution and pharmacokinetic properties. This can mostly be attributed to different surface charge and hydrophilicity of the NPs, arising from the synthetic strategy used to prepare the particles.

Fluorescence lifetime based bioassays

Fluorescence lifetime (FLT) is a robust intrinsic property and material constant of fluorescent matter. Measuring this important physical indicator has evolved from a laboratory curiosity to a powerful and established technique for a variety of applications in drug discovery, medical diagnostics and basic biological research. This distinct trend was mainly driven by improved and meanwhile affordable laser and detection instrumentation on the one hand, and the development of suitable FLT probes and biological assays on the other. In this process two essential working approaches emerged. The first one is primarily focused on high throughput applications employing biochemical in vitro assays with no requirement for high spatial resolution. The second even more dynamic trend is the significant expansion of assay methods combining highly time and spatially resolved fluorescence data by fluorescence lifetime imaging. The latter approach is currently pursued to enable not only the investigation of immortal tumor cell lines, but also specific tissues or even organs in living animals. This review tries to give an actual overview about the current status of FLT based bioassays and the wide range of application opportunities in biomedical and life science areas. In addition, future trends of FLT technologies will be discussed.

Ultrasmall inorganic nanoparticles: State-of-the-art and perspectives for biomedical applications

Ultrasmall nanoparticulate materials with core sizes in the 1-3nm range bridge the gap between single molecules and classical, larger-sized nanomaterials, not only in terms of spatial dimension, but also as regards physicochemical and pharmacokinetic properties. Due to these unique properties, ultrasmall nanoparticles appear to be promising materials for nanomedicinal applications. This review overviews the different synthetic methods of inorganic ultrasmall nanoparticles as well as their properties, characterization, surface modification and toxicity. We moreover summarize the current state of knowledge regarding pharmacokinetics, biodistribution and targeting of nanoscale materials. Aside from addressing the issue of biomolecular corona formation and elaborating on the interactions of ultrasmall nanoparticles with individual cells, we discuss the potential diagnostic, therapeutic and theranostic applications of ultrasmall nanoparticles in the emerging field of nanomedicine in the final part of this review.

Intracellular Zn(2+) detection with quantum dot-based FLIM nanosensors

Fluorescence Lifetime Imaging Microscopy (FLIM) has been employed for the detection of intracellular Zn(2+) levels, implicated in various signalling pathways, using a family of quantum dot (QD) nanosensors. The sensing mechanism was based on photoinduced electron transfer (PET) between an azacycle receptor group and the QD nanoparticles.