Ni(II)-Based Metallosupramolecular Polymer with Carboxylic Acid Groups: A Stable Platform for Smooth Imidazole Loading and the Anhydrous Proton Channel Formation

The Ni(II)-based metallosupramolecular polymer with carboxylic acid groups (polyNi) was synthesized via a 1:1 complexation of Ni(II) salt with (4,4'-(9,9-dihexyl-9H-fluorene-2,7-diyl)bis(pyridine-2,6-dicarboxylic acid) for the first time. The divalent state of Ni(II) in the polymer was confirmed by the X-ray absorption fine structure analysis. Smooth loading of imidazole molecules into polyNi proceeded with the help of the carboxylic acid groups to form the imidazole-loaded polyNi (polyNi-Im). Thermogravimetric analysis of polyNi-Im revealed that approximately three imidazole molecules were incorporated per repeating unit of polyNi. The Fourier transform infrared spectrum of polyNi-Im showed a new peak at 3219 cm-1, which shows an ∼73 cm-1 enhancement to -N-H of pristine imidazole. The peak suggests the formation of an imidazolium cation in the polymer. Powder X-ray diffraction indicated no degradation of the polymer structure during the imidazole loading because the diffraction pattern of polyNi-Im was almost the same as that of polyNi except for the presence of peaks corresponding to the imidazole molecules. Interestingly, the scanning electron microscopy measurement showed a large morphological change to uniform spherical particles by loading imidazole to the polymer. PolyNi-Im exhibited good proton conductivity (1.05 × 10-2 mS/cm) at a high temperature (120 °C), which is around 7 orders of magnitude higher than that of pristine polyNi because of the proton conduction pathway formation along the polymer chains by the incorporated imidazole molecules.

Reversible four-color electrochromism triggered by the electrochemical multi-step redox of Cr-based metallo-supramolecular polymers

Four color electrochromism (yellow, magenta, blue, and navy) has been achieved in Cr(iii)-based metallo-supramolecular polymers (polyCr), which were synthesized by 1 : 1 complexation of Cr ions and 1,4-di[[2,2′:6′,2′′-terpyridin]-4′-yl]benzene (L).

Modulation of a coordination structure in a europium(iii)-based metallo-supramolecular polymer for high proton conduction

Developing high proton conducting solid materials is significant in the field of fuel cells. A europium(iii)-based metallo-supramolecular polymer with uncoordinated carboxylic acids (PolyEu-H) was successfully synthesized by modifying the synthesis conditions. The proton conductivity was enhanced with increasing the relative humidity (RH) from 30 to 95% RH. PolyEu-H showed about 10⁴ times higher proton conductivity than the polymer with coordinated carboxylic acids (PolyEu) and about 400 times higher than the polymer without carboxylic acids (PolyEu-2). The proton conductivity of PolyEu-H reached 4.45 × 10⁻² S cm⁻¹ at 95% RH and 25 °C and 5.6 × 10⁻² S cm⁻¹ at 75 °C. The activation energy, E_a was ultralow (0.04 eV), which indicates proton conduction based on the Grotthuss mechanism. The results indicate that efficient proton conduction occurs through proton channels formed by moisture in PolyEu-H.

Developing high proton conducting solid materials is significant in the field of fuel cells. We firstly synthesized europium(iii)-based metallo-supramolecular polymer with uncoordinated carboxylic acids (PolyEu-H), for high proton conduction.

One-Dimensional Anhydrous Proton Conducting Channel Formation at High Temperature in a Pt(II)-Based Metallo-Supramolecular Polymer and Imidazole System

One dimensional (1D) Pt(II)-based metallo-supramolecular polymer with carboxylic acids (polyPtC) was synthesized using a new asymmetrical ditopic ligand with a pyridine moiety bearing two carboxylic acids. The carboxylic acids in the polymer successfully served as apohosts for imidazole loaded in the polymer interlayer scaffold to generate highly ordered 1D imidazole channels through the metallo-supramolecular polymer chains. The 1D structure of imidazole loaded polymer (polyPtC-Im) was analyzed in detail by thermogravimetric analysis, powder X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and ultraviolet-visible and photoluminescence spectroscopic measurements. PolyPtC-Im exhibited proton conductivity of 1.5 × 10^-5 S cm^-1 at 120 °C under completely anhydrous conditions, which is 6 orders of magnitude higher than that of the pristine metallo-supramolecular polymer.

Solvent free mechanochemical synthesis of Eu3+ complex and its luminescent sensing of trace water and temperature

A solid state Eu(iii) complex was synthesized by a mechanochemical method and used for luminescent sensing of trace water and temperature.

Proton Conductive Nanosheets Formed by Alignment of Metallo-Supramolecular Polymers

Linear Fe(II)-based metallo-supramolecular polymer chains were precisely aligned by the simple replacement of the counteranion with an N,N'-bis(4-benzosulfonic acid)perylene-3,4,9,10-tetracarboxylbisimide (PSA) dianion, which linked the polymer chains strongly. A parallel alignment of the polymer chains promoted by the PSA dianions yielded nanosheets formation. The nanosheets' structure was analyzed with FESEM, HRTEM, UV-vis, and XRD in detail. The nanosheets showed more than 5 times higher proton conductivity than the original polymer due to the smooth ionic conduction through the aligned polymer chains. The complex impedance plot with two semicircles also suggested the presence of grain boundaries in the polymer nanosheets.

Copper(ii) complexes with phosphorylated 1,10-phenanthrolines: from molecules to infinite supramolecular arrays

Supramolecular architectures based on copper(ii) complexes with diethoxyphosphoryl substituted 1,10-phenanthrolines are reported.