Array-based detection of persistent organic pollutants via cyclodextrin promoted energy transfer

Chemiluminescent Cucurbit[n]uril-Based Chemosensor for the Detection of Drugs in Biofluids

Chemiluminescence-based detection methods offer a superior signal-to-noise ratio and are commonly adopted for biosensors. This work presents the design and implementation of a supramolecular assay based on a chemiluminescent chemosensor. Specifically, an indicator displacement assay (IDA) with the supramolecular host-guest complex of chemiluminescent phenoxy 1,2-dioxetane and cucurbit[8]uril enables the low-micromolar detection of drugs in human urine and human serum samples. Cucurbit[8]uril thereby acts as a non-surfactant chemiluminescence enhancer and a synthetic receptor. Additionally, we show that adding an equimolar amount of cucurbit[8]uril to a commercially available dioxetane used in standard enzymatic chemiluminescence immunoassays enhances the chemiluminescence by more than 15 times. Finally, we demonstrate that a chemiluminescence resonance energy transfer between a unimolecular macrocyclic cucurbit[7]uril-dye conjugate and a phenoxy 1,2-dioxetane can be utilized to detect the herbicide paraquat at a micromolar concentration in aqueous media.

Rapid and sensitive screening of multiple polycyclic aromatic hydrocarbons by a reusable fluorescent sensor array

Simple and rapid sensing of polycyclic aromatic hydrocarbons (PAHs) remains a great technical challenge due to their chemical stability and structural similarity. Here, a simple, sensitive and cost-effective sensing strategy is proposed to detect multiple PAHs by utilizing the inner filter effect (IFE) and a reusable fluorescent sensor array consisting of four polyvinyl alcohol (PVA) composite carbon quantum dots (CDs) film sensors. The CDs/PVA films have a wide and tunable excitation range, which provide sufficient spectral overlap with PAHs and ensure the efficient occurrence of IFE. Under different excitations, the diverse UV absorption capacities of PAHs resulted in diverse spectral responses, enabling a unique chemical fingerprint for each PAH. Upon multivariate pattern recognition analysis, the array rendered high-throughput discrimination and sensitive quantification of 16 priority PAHs with 100% classification accuracy and detection limit as low as 57 nM. Moreover, the rapid and accurate screening of multiple environmental samples were also realized with the results consistent with high-performance liquid chromatography. This IFE-based reusable array is readily prepared, green and feasible, which exhibits great potential in environmental analysis and brings an advanced strategy to high-throughput sensing of more pollutants with similar structures and lack of recognition sites.

Monitoring the Viral Transmission of SARS-CoV-2 in Still Waterbodies Using a Lanthanide-Doped Carbon Nanoparticle-Based Sensor Array

The latest epidemic of extremely infectious coronavirus disease 2019 (COVID-19) has created a significant public health concern. Despite substantial efforts to contain severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within a specific location, shortcomings in the surveillance of predominantly asymptomatic infections constrain attempts to identify the epidemiological spread of the virus. Continuous surveillance of wastewater streams, including sewage, offers opportunities to track the spread of SARS-CoV-2, which is believed to be found in fecal waste. To demonstrate the feasibility of SARS-CoV-2 detection in wastewater systems, we herein present a novel facilely constructed fluorescence sensing array based on a panel of three different lanthanide-doped carbon nanoparticles (LnCNPs). The differential fluorescence response pattern due to the counterion-ligand interactions allowed us to employ powerful pattern recognition to effectively detect SARS-CoV-2 and differentiate it from other viruses or bacteria. The sensor results were benchmarked to the gold standard RT-qPCR, and the sensor showed excellent sensitivity (1.5 copies/μL) and a short sample-to-results time of 15 min. This differential response of the sensor array was also explained from the differential mode of binding of the LnCNPs with the surface proteins of the studied bacteria and viruses. Therefore, the developed sensor array provides a cost-effective, community diagnostic tool that could be potentially used as a novel epidemiologic surveillance approach to mitigate the spread of COVID-19.

Ronald C.D. Breslow (1931-2017): A career in review

Reviewed herein are key research accomplishments of Professor Ronald Charles D. Breslow (1931-2017) throughout his more than 60 year research career. These accomplishments span a wide range of topics, most notably physical organic chemistry, medicinal chemistry, and bioorganic chemistry. These topics are reviewed, as are topics of molecular electronics and origin of chirality, which combine to make up the bulk of this review. Also reviewed briefly are Breslow's contributions to the broader chemistry profession, including his work for the American Chemical Society and his work promoting gender equity. Throughout the article, efforts are made to put Breslow's accomplishments in the context of other work being done at the time, as well as to include subsequent iterations and elaborations of the research.

Fluorescence-Based Sensing of Pesticides Using Supramolecular Chemistry

The detection of pesticides in real-world environments is a high priority for a broad range of applications, including in areas of public health, environmental remediation, and agricultural sustainability. While many methods for pesticide detection currently exist, the use of supramolecular fluorescence-based methods has significant practical advantages. Herein, we will review the use of fluorescence-based pesticide detection methods, with a particular focus on supramolecular chemistry-based methods. Illustrative examples that show how such methods have achieved success in real-world environments are also included, as are areas highlighted for future research and development.

Highly sensitive detection of cobalt through fluorescence changes in β-cyclodextrin-bimane complexes

A supramolecular complex of syn-(methyl,methyl)bimane (1) and β-cyclodextrin demonstrates a sensitive (limit of detection = 0.60 nM) and selective fluorescence turn-off response in the presence of cobalt in aqueous media, with calibration curves enabling quantitation in solution and using filter papers on which bimane and cyclodextrin were adsorbed. 1H NMR spectroscopy provides insight into interactions underlying the sensor performance.

Efficient Detection and Removal of Polycyclic Aromatic Hydrocarbons Using Cyclodextrin-Modified Cellulose

Covalent functionalization of cellulose with β-cyclodextrin by succinic acid-promoted cross-linking leads to a dual-function material that efficiently promotes proximity-induced energy transfer from polycyclic aromatic hydrocarbons (PAHs) to squaraine fluorophores with high quantum yields, and removes PAHs from aqueous solution through non-covalent binding. This material, which possesses a high functionalization density (0.17 μg/mm² of cyclodextrin on cellulose), promotes energy transfer efficiencies as high as 58 % (for an anthracene donor in combination with a squaraine fluorophore acceptor), and leads to the removal of up to 91 % of a PAH (pyrene) from aqueous solution by mixing of the solution with the functionalized material. Overall, the high performance of this material in both proximity-induced energy transfer and the removal of PAHs from water means that such a method has significant potential impact in a variety of real-world environmental remediation scenarios.

Use of α-cyclodextrin to Promote Clean and Environmentally Friendly Disinfection of Phenolic Substrates via Chlorine Dioxide Treatment

The use of chlorine dioxide to disinfect drinking water and ameliorate toxic components of wastewater has significant advantages in terms of providing safe water. Nonetheless, significant drawbacks toward such usage remain. These drawbacks include the fact that toxic byproducts of the disinfection agents are often formed, and the complete removal of such agents can be challenging. Reported herein is one approach to solving this problem: the use of α-cyclodextrin to affect the product distribution in chlorine dioxide-mediated decomposition of organic pollutants. The presence of α-cyclodextrin leads to markedly more oxidation and less aromatic chlorination, in a manner that is highly dependent on analyte structure and other reaction conditions. Mechanistic hypotheses are advanced to explain the cyclodextrin effect, and the potential for use of α-cyclodextrin for practical wastewater treatment is also discussed.

Enhanced Characterization of Pyrene Binding in Mixed Cyclodextrin Systems via Fluorescence Spectroscopy

Although significant effort has been expended to analyze the binding of pyrene in β-cyclodextrin and γ-cyclodextrin, little has been published on the binding of this guest in β-cyclodextrin derivatives (methyl-β-cyclodextrin and 2-hydroxypropyl-β-cyclodextrin) or in mixtures of such derivatives, despite the fact that these derivatives are known to have different supramolecular properties that facilitate unique modes of complexation. Reported herein is a detailed spectroscopic investigation of the binding of pyrene in β-cyclodextrin derivatives and in binary mixtures of cyclodextrins. Py values, defined as the ratio of representative vibronic bands in the fluorescence emission of pyrene, were used to measure changes in the pyrene microenvironment in the presence of the cyclodextrin hosts, and indicated that unmodified β-cyclodextrin is unique in providing a fully hydrophobic environment for pyrene through the use of two cyclodextrins to bind a single pyrene guest. By comparison, both γ-cyclodextrin and modified β-cyclodextrin analogues bind pyrene in a less hydrophobic environment through 1:1 binding stoichiometries that allow for continued interactions between the incompletely encapsulated pyrene guest and the aqueous solvent system. Binary mixtures of cyclodextrins were also explored and reinforce the unique properties of the unmodified β-cyclodextrin host. Graphical Abstract The unique binding geometries of pyrene in beta-cyclodextrin and its derivatives leads to measurable fluorescence emission signals, whose information can be used to elucidate the highly structurally dependent binding geometries and stoichiometries.

Detection of anabolic steroids via cyclodextrin-promoted fluorescence modulation

Reported herein is the detection of anabolic steroids through the use of cyclodextrin-promoted interactions between the analyte of interest and a high quantum yield fluorophore, which lead to measurable, analyte-specific changes in the fluorophore emission signal. By using a variety of β-cyclodextrin derivatives (unmodified β-cyclodextrin, methyl-β-cyclodextrin, and 2-hydroxypropyl-β-cyclodextrin) in combination with high quantum yield fluorophore rhodamine 6G, we detected five anabolic steroid analytes with 100% differentiation between structurally similar analytes and micromolar level limits of detection. Overall, these results show significant potential in the development of practical, fluorescence-based steroid detection devices.

Guanidinocalix[5]arene for sensitive fluorescence detection and magnetic removal of perfluorinated pollutants

Perfluorinated alkyl substances, such as perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), are toxic materials that are known to globally contaminate water, air, and soil resources. Strategies for the simultaneous detection and removal of these compounds are desired to address this emerging health and environmental issue. Herein, we develop a type of guanidinocalix[5]arene that can selectively and strongly bind to PFOS and PFOA, which we use to demonstrate the sensitive and quantitative detection of these compounds in contaminated water through a fluorescent indicator displacement assay. Moreover, by co-assembling iron oxide nanoparticle with the amphiphilic guanidinocalix[5]arene, we are able to use simple magnetic absorption and filtration to efficiently remove PFOS and PFOA from contaminated water. This supramolecular approach that uses both molecular recognition and self-assembly of macrocyclic amphiphiles is promising for the detection and remediation of water pollution.

Colorimetric Detection of Aliphatic Alcohols in β-Cyclodextrin Solutions

The sensitive, selective, and practical detection of aliphatic alcohols is a continuing technical challenge with significant impact in public health research and environmental remediation efforts. Reported herein is the use of a β-cyclodextrin derivative to promote proximity-induced interactions between aliphatic alcohol analytes and a brightly colored organic dye, which resulted in highly analyte-specific color changes that enabled accurate alcohol identification. Linear discriminant analysis of the color changes enabled 100% differentiation of the colorimetric signals obtained from methanol, ethanol, and isopropanol in combination with BODIPY and Rhodamine dyes. The resulting solution-state detection system has significant broad-based applicability because it uses only easily available materials to achieve such detection with moderate limits of detection obtained. Future research with this sensor system will focus on decreasing limits of detection as well as on optimizing the system for quantitative detection applications.

Identification of 15 Phthalate Esters in Commercial Cheese Powder via Cyclodextrin-Promoted Fluorescence Detection

A challenge for detecting phthalates in commercial products such as cheese powders is that the composition of the products is highly complex, and current methods for detection rely on gas chromatography-mass spectrometry, which is not portable and cannot be used by individual consumers at a time and place of their choosing. Herein, we report the development of a new method for phthalate detection in cheese powder using cyclodextrin-promoted fluorescence detection, in which the presence of the phthalate analytes leads to highly analyte-specific changes in the fluorescence emission signal of a fluorophore bound in a cyclodextrin cavity. This method relies on subtle changes in the analyte affinity for the fluorophore and the cyclodextrin cavity and provides for markedly more straightforward sample preparation procedures and an extremely rapid read-out signal, with potential for the development of portable fluorescence sensors. Using this method, we were able to detect 15 phthalate esters with highly analyte-specific responses and at concentrations as low as 0.12 μM, which is well below regulatory levels of concern. Computational investigations strongly support the observed experimental trends.

The Effects of Ultrasound on the Electro-Oxidation of Sulfate Solutions at Low pH

The electro‐oxidation of sulfate solutions is a well‐established route for the generation of powerful oxidants such as persulfate. Despite this, the effects of simultaneous ultrasound irradiation during this process has attracted little attention. Herein, we investigate the effects of a low‐intensity ultrasonic field on the generation of solution‐phase oxidants during the electro‐oxidation of sulfate solutions. Our results show that at high current densities and high sulfate concentrations, ultrasound has little effect on the Faradaic and absolute yields of solution‐phase oxidants. However, at lower current densities and sulfate concentrations, the amount of these oxidants in solution appears to decrease under ultrasonic irradiation. A mechanism explaining these results is proposed (and validated), whereby anodically‐generated sulfate and hydroxyl radicals are more effectively transported into bulk solution (where they are quenched) during sonication, whereas in the absence of an ultrasonic field these radicals combine with one another to form more persistent species (such as persulfate) that can be detected by iodometry.

Fluorescence-Based Detection of Benzene, Toluene, Ethylbenzene, Xylene, and Cumene (BTEXC) Compounds in Fuel-Contaminated Snow Environments

Reported herein is the sensitive and selective cyclodextrin-promoted fluorescence detection of benzene, toluene, ethylbenzene, xylene, and cumene (BTEXC) fuel components in contaminated snow samples collected from several locations in the state of Rhode Island. This detection method uses cyclodextrin as a supramolecular scaffold to promote analyte-specific, proximity-induced fluorescence modulation of a high-quantum-yield fluorophore, which leads to unique fluorescence responses for each cyclodextrin-analyte-fluorophore combination investigated and enables unique pattern identifiers for each analyte using linear discriminant analysis (LDA). This detection method operates with high levels of sensitivity (sub-micromolar detection limits), selectivity (100% differentiation between structurally similar compounds, such as ortho-, meta-, and para-xylene isomers), and broad applicability (for different snow samples with varying chemical composition, pH, and electrical conductivity). The high selectivity, sensitivity, and broad applicability of this method indicate significant potential in the development of practical detection devices for aromatic toxicants in complex environments.

Cyclodextrin-Promoted Fluorescence Detection of Aromatic Toxicants and Toxicant Metabolites in Commercial Milk Products

The detection of polycyclic aromatic hydrocarbons (PAHs) and their metabolites in food and in agricultural sources is an important research objective due to the PAHs' known persistence, carcinogenicity, and toxicity. PAHs have been found in the milk of lactating cows, and in the leaves and stems of plants grown in PAH-contaminated areas, thereby making their way into both cow milk and plant milk alternatives. Reported herein is the rapid, sensitive, and selective detection of 10 PAHs and PAH metabolites in a variety of cow milks and plant milk alternatives using fluorescence energy transfer from the PAH to a high quantum yield fluorophore, combined with subsequent array-based statistical analyses of the fluorescence emission signals. This system operates with high sensitivity (low micromolar detection limits), selectivity (100% differentiation even between structurally similar analytes), and general applicability (for both unmodified lipophilic PAHs and highly polar oxidized PAH metabolites, as well as for different cow and plant milk samples). These promising results show significant potential to be translated into solid-state devices for the rapid, sensitive, and selective detection of PAHs and their metabolites in complex, commercial food products.

Detection of Organochlorine Pesticides in Contaminated Marine Environments via Cyclodextrin-Promoted Fluorescence Modulation

The development of practical and robust detection methods for pesticides is an important research objective owing to the known toxicity, carcinogenicity, and environmental persistence of these compounds. Pesticides have been found in bodies of water that are located near areas where pesticides are commonly used and easily spread to beaches, lakes, and rivers; affect the species living in those waterways; and harm humans who come into contact with or eat fish from such water. Reported herein is the rapid, sensitive, and selective detection of four organochlorine pesticides in a variety of water sources across the state of Rhode Island using cyclodextrin-promoted fluorescence detection. This method relies on the ability of cyclodextrin to promote analyte-specific fluorescence modulation of a high quantum yield fluorophore when a pesticide is in close proximity, combined with subsequent array-based statistical analyses of the measurable changes in the emission signals. This system operates with high sensitivity (low micromolar detection limits), selectivity (100% differentiation between structurally similar analytes), and general applicability (for different water samples with varying salinity and pH as well as for different water temperatures).

Towards Rational Chemosensor Design through Improved Understanding of Experimental Parameter Variation and Tolerance in Cyclodextrin-Promoted Fluorescence Detection

We have previously developed a highly efficient fluorescence-based toxicant-detection method that operates in complex environments to detect aromatic toxicants and toxicant metabolites with high sensitivity and selectivity. This method relies on the ability of γ-cyclodextrin to act as a supramolecular scaffold, and uses a variety of non-covalent interactions between the cyclodextrin, toxicant, and fluorophore to enable efficient detection. Reported herein is an investigation of the effect of various experimental parameters, including host concentration, temperature, pH, salt, and solvent, on the observed energy-transfer efficiencies. These results advance our understanding of γ-cyclodextrin-based association complexes and provide crucial information for the development of fluorescence-based sensors using such complexation and the resultant fluorescence-based detection.

Efficient Fluorescence Detection of Aromatic Toxicants and Toxicant Metabolites in Human Breast Milk

Once chemical contaminants are released into the environment, there are a number of concerns that arise regarding the environmental persistence of the contaminants, their known and suspected toxicities, and their potential disruption to the ecosystem. One class of contaminants that is of continuing concern is polycyclic aromatic hydrocarbons (PAHs), persistent organic pollutants that are significant components of oil spills. PAHs have been found in the breast milk of nursing mothers living in oil spill affected regions, and can harm the nursing children. We report herein the sensitive and selective detection of 10 PAHs and PAH metabolites in human breast milk using fluorescence energy transfer from the PAH to a high quantum yield fluorophore, and array-based statistical analyses of the resulting fluorescence responses. This detection system was able to separate and identify the PAHs with 100% success in human breast milk and at concentrations as low as 0.17 μM. These results have significant implications in public health and in the monitoring and mitigation of environmental disasters.

Array-based detection of isomeric and analogous analytes employing synthetically modified fluorophore attached β-cyclodextrin derivatives

Improved selectivity and sensitivity using covalent fluorophore–cyclodextrin analogues resulted in 100% successful classification for five classes of analytes.

A highly versatile fluorenone-based macrocycle for the sensitive detection of polycyclic aromatic hydrocarbons and fluoride anions

Reported herein is the high yielding synthesis of a new fluorenone-based triazolophane and its sensing capabilities for polycyclic aromatic hydrocarbons (PAHs) and fluoride anions.

Rapid and efficient pesticide detection via cyclodextrin-promoted energy transfer

Cyclodextrins facilitate non-covalent fluorescence energy transfer from a variety of pesticides to high quantum-yield fluorophores, resulting in a rapid, sensitive detection scheme for these compounds with detection limits as low as two micromolar. Such a facile detection tool has significant potential applications in agriculture and public health research.

Selective detection of non-aromatic pesticides via cyclodextrin-promoted fluorescence modulation

The introduction of pesticides to a cyclodextrin-fluorophore solution leads to highly specific fluorescence changes that are used for pesticide detection.