Ru(II)-Catalyzed C-H Amination of 1,2,3-Benzotriazinones with Azide Compounds

A Ru(II)-catalyzed directed C-H amination of 1,2,3-benzotriazinones with azide compounds has been reported. The reaction has a wide substrate scope of organic azides with good results and represents a useful pathway to the construction of versatile heterocyclic amino products. In addition, the method can be used for the phthalazinones, highlighting the synthetic practicability of the strategy.

Rhodium-catalyzed three-component C(sp3)/C(sp2)-H activation enabled by a two-fold directing group strategy

Rh-catalyzed three-component C(sp3)/C(sp2)-H activation has been achieved through a two-directing group strategy. This protocol provides a convenient and efficient pathway for the construction of diverse 8-alkyl quinoline derivatives in one-pot. Furthermore, mechanistic studies revealed that the first C-H amidation was significantly faster than the sequential C-H alkylation.

Transition-Metal-Catalyzed Directed C-H Functionalization in/on Water

Directing group assisted C-H bond functionalization using transition-metal-catalysis has emerged as a reliable synthetic tool for the construction of regioselective carbon-carbon/heteroatom bonds. Off late, "in/on water directed transition-metal-catalysis", though still underdeveloped, has appeared as one of the prominent themes in sustainable organic chemistry. This article covers the advancements, mechanistic insights and application of the sustainable directed C-H bond functionalization of (hetero)arenes in/on water in the presence of transition-metal-catalysis.

Palladium-Catalyzed C(sp3)-H Biarylation of 8-Methyl Quinolines with Cyclic Diaryliodonium Salts to Access Functionalized Biaryls and Fluorene Derivatives

Herein, we have developed the cyclic diaryliodonium salts as biarylating agents in the C(sp³)-H functionalization using 8-methyl quinoline as the intrinsic directing group. The oxidant-free reaction produces a vast array of the biarylated products with iodo functionality that can be further functionalized. Additionally, intramolecular C(sp³)-H functionalization in a stepwise manner under palladium-catalyzed conditions produced the fluorene derivatives in excellent yields.

Transition-Metal-Catalyzed, Coordination-Assisted Functionalization of Nonactivated C(sp3)-H Bonds

Transition-metal-catalyzed, coordination-assisted C(sp³)-H functionalization has revolutionized synthetic planning over the past few decades as the use of these directing groups has allowed for increased access to many strategic positions in organic molecules. Nonetheless, several challenges remain preeminent, such as the requirement for high temperatures, the difficulty in removing or converting directing groups, and, although many metals provide some reactivity, the difficulty in employing metals outside of palladium. This review aims to give a comprehensive overview of coordination-assisted, transition-metal-catalyzed, direct functionalization of nonactivated C(sp³)-H bonds by covering the literature since 2004 in order to demonstrate the current state-of-the-art methods as well as the current limitations. For clarity, this review has been divided into nine sections by the transition metal catalyst with subdivisions by the type of bond formation. Synthetic applications and reaction mechanism are discussed where appropriate.

Thioether-Directed NiH-Catalyzed Remote γ-C(sp3)-H Hydroamidation of Alkenes by 1,4,2-Dioxazol-5-ones

A NiH-catalyzed thioether-directed cyclometalation strategy is developed to enable remote methylene C-H bond amidation of unactivated alkenes. Due to the preference for five-membered nickelacycle formation, the chain-walking isomerization initiated by the NiH insertion to an alkene can be terminated at the γ-methylene site remote from the alkene moiety. By employing 2,9-dibutyl-1,10-phenanthroline (L4) as the ligand and dioxazolones as the reagent, the amidation occurs at the γ-C(sp³)-H bonds to afford the amide products in up to 90% yield (>40 examples) with remarkable regioselectivity (up to 24:1 rr).

Synergetic copper/TEMPO-catalysed benzylic C–H imidation with N-fluorobenzenesulfonimide at room temperature and tandem conversions with alcohols or arenes

A remote carbamate-directed benzylic C–H imidation with NFSI at room temperature through synergetic CuCl-TEMPO catalysis and tandem alkoxylation or arylation with alcohols or arenes are described.

Rh(III)-Catalyzed C(sp3)-H Acetoxylation of 8-Methylquinolines

A mild and efficient Rh(III)-catalyzed aliphatic C-H acetoxylation directed by quinolines has been developed with widespread functional groups, including various halogens, which usually can provide precursors for further organic synthesis but easily results in selectivity issues in the Pd- and Ni-catalyzed reaction. Interestingly, Ac₂O plays an essential role in promoting the transformation.

Recent trends in catalytic sp3 C-H functionalization of heterocycles

Heterocycles are a ubiquitous substructure in organic small molecules designed for use in materials and medicines. Recent work in catalysis has focused on enabling access to new heterocycle structures by sp³ C-H functionalization on alkyl side-chain substituents-especially at the heterobenzylic position-with more than two hundred manuscripts published just within the last ten years. Rather than describing in detail each of these reports, in this mini-review we attempt to highlight gaps in existing techniques. A semi-quantitative overview of ongoing work strongly suggests that several specific heterocycle types and bond formations outside of C-C, C-N, and C-O have been almost completely overlooked.

Cobalt-catalyzed ring-opening addition of azabenzonorbornadienes via C(sp3)–H bond activation of 8-methylquinoline

The first ring-opening addition of a benzylic C(sp³)–H bond to azabenzonorbornadienes is demonstrated.

Ligand-free iron-catalyzed benzylic C (sp3)–H amination of methylarenes with N-fluorobenzenesulfonimide

The first biocompatible iron-catalyzed benzylic C (sp³)–H amination of methylarenes with NFSI under ligand and additional oxidant free conditions is described.

Site-selective C(sp3)–H amination of thioamide with anthranils under Cp*CoIII catalysis

Synthetically versatile anthranils as a bifunctional amino source have been employed for the first time to enable direct amination on unactivated C(sp³)–H bonds of thioamides under Cp*Co^III catalysis.

Rh(iii)-Catalyzed straightforward arylation of 8-methyl/formylquinolines using diazo compounds

A straightforward Rh(iii)-catalyzed general strategy was developed for the introduction of naphthol/phenol moieties to 8-methyl and formylquinolines using diazonaphthalen-2(1H)-ones/quinone diazides.

Cobalt-catalysed unactivated C(sp3)–H amination: two-state reactivity and multi-reference electronic character

A remarkable two-state reactivity scenario and an unusual multi-reference character have been computationally found in Co-catalysed C(sp³)–H amination. In addition, the investigation on the additive, aminating reagent, metal center, and auxiliary ligand provides implications for development of new catalytic C–H functionalization systems.

A comprehensive overview of directing groups applied in metal-catalysed C-H functionalisation chemistry

The present review is devoted to summarizing the recent advances (2015-2017) in the field of metal-catalysed group-directed C-H functionalisation. In order to clearly showcase the molecular diversity that can now be accessed by means of directed C-H functionalisation, the whole is organized following the directing groups installed on a substrate. Its aim is to be a comprehensive reference work, where a specific directing group can be easily found, together with the transformations which have been carried out with it. Hence, the primary format of this review is schemes accompanied with a concise explanatory text, in which the directing groups are ordered in sections according to their chemical structure. The schemes feature typical substrates used, the products obtained as well as the required reaction conditions. Importantly, each example is commented on with respect to the most important positive features and drawbacks, on aspects such as selectivity, substrate scope, reaction conditions, directing group removal, and greenness. The targeted readership are both experts in the field of C-H functionalisation chemistry (to provide a comprehensive overview of the progress made in the last years) and, even more so, all organic chemists who want to introduce the C-H functionalisation way of thinking for a design of straightforward, efficient and step-economic synthetic routes towards molecules of interest to them. Accordingly, this review should be of particular interest also for scientists from industrial R&D sector. Hence, the overall goal of this review is to promote the application of C-H functionalisation reactions outside the research groups dedicated to method development and establishing it as a valuable reaction archetype in contemporary R&D, comparable to the role cross-coupling reactions play to date.

Transition Metal-Catalyzed C-H Amination: Scope, Mechanism, and Applications

Catalytic transformation of ubiquitous C-H bonds into valuable C-N bonds offers an efficient synthetic approach to construct N-functionalized molecules. Over the last few decades, transition metal catalysis has been repeatedly proven to be a powerful tool for the direct conversion of cheap hydrocarbons to synthetically versatile amino-containing compounds. This Review comprehensively highlights recent advances in intra- and intermolecular C-H amination reactions utilizing late transition metal-based catalysts. Initial discovery, mechanistic study, and additional applications were categorized on the basis of the mechanistic scaffolds and types of reactions. Reactivity and selectivity of novel systems are discussed in three sections, with each being defined by a proposed working mode.

Cp*Rh(iii)-catalyzed C(sp3)–H alkylation of 8-methylquinolines in aqueous media

A mild and efficient approach for the cross-coupling reaction of 8-methylquinolines with a range of allylic alcohols in water as a solvent under rhodium(iii) catalysis is described.

C(sp3)–H amination of 8-methylquinolines with azodicarboxylates under Rh(iii) catalysis: cytotoxic evaluation of quinolin-8-ylmethanamines

The rhodium(iii)-catalyzed C(sp³)–H amination reaction of 8-methylquinolines and azodicarboxylates is described for the construction of quinolin-8-ylmethanamine derivatives, which were evaluated for in vitro cytotoxicity.

Rhodium(iii)-catalyzed regio- and stereoselective benzylic α-fluoroalkenylation with gem-difluorostyrenes

Rh(iii)-Catalyzed fluoroalkenylation of a benzylic C–H bond has been realized under mild conditions with high regio- and stereoselectivity.

Insight into the mechanism and site-selectivity of Rh2II,II(esp)2-catalyzed intermolecular C–H amination

The mechanisms and site-selective determinants of Rh₂^II,II(esp)₂-catalyzed intermolecular C–H bond aminations of three isoamylbenzene-derived substrates, p-R–C₆H₄(CH₂)₂CH(CH₃)₂ (R = OCH₃, H, CF₃), have been investigated by the density functional theory (BPW91) method.

Copper-catalyzed intermolecular amidation of 8-methylquinolines with N-fluoroarylsulfonimides via Csp3–H activation

An efficient Cu-catalyzed intermolecular amidation of 8-methylquinolines with N-fluoroarylsulfonimides via Csp³–H activation has been developed.