Accessing stable zirconium carboxy-aminophosphonate nanosheets as support for highly active Pd nanoparticles

Layered Uranyl Phosphonates Encapsulating Co(II)/Mn(II)/Zn(II) Ions: Exfoliation into Nanosheets and Its Impact on Magnetic and Luminescent Properties

Layered heterometallic 5f-3d uranyl phosphonates can exhibit unique luminescent and/or magnetic properties, but the fabrication and properties of their 2D counterparts have not been investigated. Herein we report three heterobimetallic uranyl phosphonates, namely, [(UO₂ )₃ M(2-pmbH)₄ (H₂ O)₄ ] ⋅ 2H₂ O [MU, M=Co(II), CoU; Mn(II), MnU; Zn(II), ZnU; 2-pmbH₃ =2-(phosphonomethyl)benzoic acid]. They are isostructural and display two-dimensional layered structures where the M(II) centers are encapsulated inside the windows generated by the diamagnetic uranyl phosphonate layer. Each M(II) has an octahedral geometry filled with four water molecules in the equatorial positions and two phosphonate oxygen atoms in the axial positions. The uranium atoms adopt UO₇ pentagonal bipyramidal and UO₆ square bipyramidal geometries. The lattice and coordination water molecules can be released by thermal treatment and reabsorbed in a reversible manner, accompanied with changes of magnetic dynamics. Interestingly, the bulk samples of MU can be exfoliated in acetone via freezing and thawing processes forming nanosheets with single-layer or two-layer thickness (MU-ns). Magnetic studies revealed that the CoU and MnU systems exhibited field-induced slow magnetization relaxation at low temperature. Compared with crystalline CoU, the magnetic relaxation of the CoU-ns aggregates is significantly accelerated. Moreover, photoluminescence measured at 77 K showed slight red-shift of the five characteristic uranyl emission bands for ZnU-ns in comparison with those of the crystalline ZnU. This work gives the first examples of 2D materials based on 5f-3d heterometallic uranyl phosphonates and illustrates the impact of dimension reduction on their magnetic/optical properties.

Synthesis, Crystal Structure, and Antibacterial Properties of Silver-Functionalized Low-Dimensional Layered Zirconium Phosphonates

New insoluble layered zirconium phosphate carboxyaminophosphonates (ZPs), with the general formula Zr₂(PO₄)H₅[(O₃PCH₂)₂N(CH₂)_nCOO]₂·mH₂O (n = 3, 4, and 5), have been prepared and characterized. The crystal structure for n = 3 and 4 samples was determined ab initio from X-ray powder diffraction data. The structure for n = 3 was monoclinic in space group C2/c with the following unit cell parameters: a = 34.346(1) Å, b = 8.4930(2) Å, c = 9.0401(2) Å, and β = 97.15(1)°. The structure for n = 4 was triclinic in space group P1̅ with the following unit cell parameters: a = 17.9803(9) Å, b = 8.6066(4) Å, c = 9.0478(3) Å, α = 90.466(3)°, β = 94.910(4)°, and γ = 99.552(4)°. The two structures had the same connectivity as Zr phosphate glycine diphosphonate (n = 1), as previously reported. By intercalation of short amines, these layered compounds were exfoliated in single lamella or packets of a few lamellae, which formed colloidal dispersions in water. After a thorough characterization, the dispersed lamellae were functionalized with Ag nanoparticles, which were grown in situ on the surface of exfoliated lamellae. Finally, their antimicrobial activity was tested on several Gram-positive and Gram-negative bacteria. All of these systems were found to be active against the four pathogens most frequently isolated from orthopedic prosthetic infections and often causative of nosocomial infections. Interestingly, they were found to express powerful inhibitory activity even against bacterial strains exhibiting a relevant profile of antibiotic resistance such as Staphylococcus aureus ATCC 700699.

Uranyl phosphonates: crystalline materials and nanosheets for temperature sensing

Ultrathin nanosheets of luminescent metal-organic frameworks or coordination polymers have been widely used for sensing ions, solvents and biomolecules but, as far as we are aware, not yet used for temperature sensing. Herein we report two luminescent uranyl phosphonates based on 2-(phosphonomethyl)benzoic acid (2-pmbH₃), namely (UO₂)(2-pmbH₂)₂ (1) and (H₃O)[(UO₂)₂(2-pmb)(2-pmbH)] (2). The former has a supramolecular layer structure, composed of chains of corner-sharing {UO₆} octahedra and {PO₃C} tetrahedra which are connected by hydrogen bonds between phosphonate and carboxylic groups. Compound 2 possesses a unique 2D anionic framework structure, where the inorganic uranyl phosphonate chains made up of {UO₇} and {PO₃C} polyhedra are cross-linked by 2-pmb^3- ligands. The carboxylic groups of 2-pmbH^2- ligands are pendant on the two sides of the layers and form hydrogen bonds between the layers. Both compounds can be exfoliated in acetone via a top-down freeze-thaw method, resulting in nanosheets of two-layer thickness. Interestingly, the photoluminescence (PL) of 1 and 2 is highly temperature sensitive. Variable temperature PL studies revealed that compounds 1 and 2 can be used as thermometers in the temperature ranges 120-300 K and 100-280 K, respectively. By doping the nanosheets into polymer matrix, 1-ns@PMMA and 2-ns@PMMA were prepared. The PL intensity of 1-ns@PMMA is insensitive to temperature, unlike that of the bulk sample. While 2-ns@PMMA exhibits similar temperature-dependent luminescence behaviour to its bulk counterpart, thereby enabling its potential application as a thermometer in the temperature range 100-280 K.

Green Synthesis of Pd Nanoparticles for Sustainable and Environmentally Benign Processes

Among transition metal nanoparticles, palladium nanoparticles (PdNPs) are recognized for their high catalytic activity in a wide range of organic transformations that are of academic and industrial importance. The increased interest in environmental issues has led to the development of various green approaches for the preparation of efficient, low-cost and environmentally sustainable Pd-nanocatalysts. Environmentally friendly solvents, non-toxic reducing reagents, biodegradable capping and stabilizing agents and energy-efficient synthetic methods are the main aspects that have been taken into account for the production of Pd nanoparticles in a green approach. This review provides an overview of the fundamental approaches used for the green synthesis of PdNPs and their catalytic application in sustainable processes as cross-coupling reactions and reductions with particular attention afforded to the recovery and reuse of the palladium nanocatalyst, from 2015 to the present.

Cobalt(II)-dianthracene Frameworks: Assembly, Exfoliation and Properties

Metal-organic frameworks containing responsive organic linkers are attractive for potential applications in sensors and molecular devices. Herein we report three cobalt(II) phosphonates incorporating responsive dianthracene linkers, namely, Co₂ (amp₂ H₂ )₂ (H₂ O)₄  ⋅ 6H₂ O (MDAF-1), Co₂ (amp₂ )(H₂ O)₄  ⋅ 2H₂ O (MDAF-2) and Co(amp₂ H₂ ) ⋅ 2H₂ O ⋅ 0.5DMF (MDAF-3), where amp₂ H₄ is pre-photodimerized 9-anthrylmethylphosphonic acid. MDAF-1 shows a layer structure in which dinuclear Co₂ (PO₃ H)₂ units are inter-connected by dianthracene ligands. In MDAF-2 and MDAF-3, inorganic chains of corner-sharing {CoO₄ } (or {CoO₆ }) and {PO₃ C} are cross-linked by dianthracene ligands into 3D frameworks. All compounds underwent thermo-induced phase transitions, first the de-solvation and then the de-dimerization of dianthracene (as well as the release of the remaining solvent molecules for MDAF-2 and -3), associated with magnetic changes. MDAF-1 can be exfoliated into single-layer nanosheets in water which show light-triggered luminescent changes.

Treatment of Wastewaters with Zirconium Phosphate Based Materials: A Review on Efficient Systems for the Removal of Heavy Metal and Dye Water Pollutants

Layered zirconium phosphate (ZrP) is a versatile material with phosphate (POH ) groups able to exchange inorganic and organic cations or to intercalate basic molecules. The present review deals with the use of this material as a sorbent for heavy metal cations or dye molecules in wastewater treatments. The possibility to combine ZrP with polymers or other inorganic materials, in order to have suitable systems for real and large scale applications, was investigated, as well as the combination with photocatalytic materials to obtain hetrogeneous photocatalysts for the capture and photodegradation of organic dye molecules.

Pyridine-d5 as a 2H NMR probe for investigation of macrostructure and pore shapes in a layered Sn(iv) phosphonate–phosphate material

Isotropic and anisotropic motions and molecular states of pyridine-d₅, adsorbed on the surface within the pores of a layered Sn(iv) phosphonate–phosphate material (1) have been characterized thermodynamically and kinetically by solid-state NMR.

Zirconium Carboxyaminophosphonate Nanosheets as Support for Ag Nanoparticles

A layered insoluble inorganic-organic solid, namely zirconium phosphate glycine-N,N-bismethylphosphonate, was used to prepare dispersions of nanosheets to support active metals such as metallic silver nanoparticles and zinc ions. Zr phosphate-phosphonate microcrystals were first exfoliated with methylamine to produce a stable colloidal dispersion and then the methylamine was removed by treatment with hydrochloric acid. The obtained colloidal dispersion of Zr phosphate-phosphonate nanosheets was used to immobilize silver or zinc cations, via ion exchange, with the acidic protons of the sheets. The layered matrix showed a great affinity for the metal cations up taking all the added cations. The treatment of the dispersions containing silver ions with ethanol yielded metal silver nanoparticles grafted on the surface of the layered host. The samples were characterized by X-ray powder diffraction, elemental analysis transmission electron microscopy, and selected samples were submitted to antimicrobial tests. The nanocomposites based on Ag nanoparticles showed good bactericidal properties against the bacterial reference strain Staphylococcus epidermidis (S. epidermidis).

Assessment of Chitosan Based Catalyst and their Mode of Action

Introduction:

The popularity of chitosan is increasing among the researchers due to its environment friendly nature, high activity and easy approachability. Chitosan based catalysts are not only the most active and selective in catalytic reaction, but their “green” accessibility also makes them promising in organic catalysis. Chitosan is commonly extracted from chitin by alkaline deacetylation and it is the second abundant biopolymer in nature after cellulose. Chitosan based catalysts are advantageous by means of non-metallic activation as it involves small organic molecules. The robustness, nontoxicity, the lack of metal leaching possibility, inertness towards moisture and oxygen, easy handling and storage are the main advantages of organocatalysts. Traditional drawbacks associated with the metal-based heterogeneous catalysts, like longer reaction times during any synthesis, metal-leaching after every reaction and structural instability of the catalyst for prolonged recycling experiments are also very negligible for chitosan based catalysts. Besides, these catalysts can contribute more in catalysis due to their reusability and these special features increase their demand as the functionalized and profitable catalysts.

Objective:

The thorough description about the preparation of organocatalysts from chitosan and their uniqueness and novel activities in various famous reactions includes as the main aim of this review. Reusable and recycle nature of chitosan based organocatalysts gain the advantages over traditional and conventional catalyst which is further discussed over here.

Methods and Discussions:

In this article only those reactions are discussed where chitosan has been used both as support in heterogeneous catalysts or used as a catalyst itself without any co-catalyst for some reactions. Owing to its high biodegradability, nontoxicity, and antimicrobial properties, chitosan is widely-used as a green and sustainable polymeric catalyst in vast number of the reactions. Most of the preparations of catalyst have been achieved by exploring the complexation properties of chitosan with metal ions in heterogeneous molecular catalysis. Organocatalysis with chitosan is primarily discussed for carbon-carbon bond-forming reactions, carbon dioxide fixation through cyclo- addition reaction, condensation reaction and fine chemical synthesis reactions. Furthermore, its application as an enantioselective catalyst is also considered here for the chiral, helical organization of the chitosan skeleton. Moreover, another advantage of this polymeric catalyst is its easy recovery and reusability for several times under solvent-free conditions which is also explored in the current article.

Conclusion:

Important organocatalyzed reactions with either native chitosan or functionalized chitosan as catalysts have attracted great attention in the recent past. Also, chitosan has been widely used as a very promising support for the immobilization of catalytic metals for many reactions. In this review, various reactions have been discussed which show the potentiality of chitosan as catalyst or catalyst support.

New Directions in Metal Phosphonate and Phosphinate Chemistry

In September 2018, the First European Workshop on Metal Phosphonates Chemistry brought together some prominent researchers in the field of metal phosphonates and phosphinates with the aim of discussing past and current research efforts and identifying future directions. The scope of this perspective article is to provide a critical overview of the topics discussed during the workshop, which are divided into two main areas: synthesis and characterisation, and applications. In terms of synthetic methods, there has been a push towards cleaner and more efficient approaches. This has led to the introduction of high-throughput synthesis and mechanochemical synthesis. The recent success of metal–organic frameworks has also promoted renewed interest in the synthesis of porous metal phosphonates and phosphinates. Regarding characterisation, the main advances are the development of electron diffraction as a tool for crystal structure determination and the deployment of in situ characterisation techniques, which have allowed for a better understanding of reaction pathways. In terms of applications, metal phosphonates have been found to be suitable materials for several purposes: they have been employed as heterogeneous catalysts for the synthesis of fine chemicals, as solid sorbents for gas separation, notably CO2 capture, as materials for electrochemical devices, such as fuel cells and rechargeable batteries, and as matrices for drug delivery.

About Solid Phase vs. Liquid Phase in Suzuki-Miyaura Reaction

A critical review of conclusions about the putative heterogeneous mechanism in the Suzuki-Miyaura coupling by supported Pd solids is reported. In the first section, the turnover frequencies (TOF) of 20 well-established homogeneous catalysts are shown to be in the range 200 to 1,000,000,000 h − 1 . The evidences used to prove a heterogeneous mechanism are discussed and another interpretation is proposed, hypothesizing that only the leached species are responsible for the catalytic reaction, even at ppb levels. Considering more than 40 published catalytic systems for which liquid phase Pd content have been reported, activities have been computed based on leached Pd concentrations and are shown to be in the range TOF 150 to 70,000,000 h − 1 . Such values are compatible with those found for the well-established homogeneous catalysts which questions the validity of the conclusions raised by many papers about the heterogeneous (solid) nature of Suzuki-Miyaura catalysis. Last, a tentative methodology is proposed which involves the rational use of well-known tests (hot-filtration test, mercury test…) to help to discriminate between homogeneous and heterogeneous mechanisms.

Polymorphic layered copper phosphonates: exfoliation and proton conductivity studies

α-Cu(4-cnappH)(H₂O) (α-Cu-1), α-Cu(4-cnappH)(H₂O)·0.5H₂O (α-Cu-2) and β-Cu(4-cnappH)(H₂O) (β-Cu) [4-cnappH₃ = (4-carboxynaphthalen-1-yl)phosphonic acid] are polymorphic layered compounds. Proton conduction is more favorable in α-Cu-2 than in α-Cu-1, but exfoliation into nanosheets decreases the conductivity.

Guest Molecules in a Layered Microporous Tin(IV) Phosphonate-Phosphate Material: Solid State NMR Studies

There is little systematic understanding of pore surfaces in layered microporous metal(IV) phosphate-phosphonate materials and their interactions with guest molecules. In this paper, we show how to probe the mobility of guest molecules in such poorly crystalline systems using multinuclear solid-state NMR and relaxation time measurements. Anisotropic motions of benzene- d₆ molecules absorbed on the pore walls of material Sn(O₃PC₆H₄PO₃)_0.85(O₃POH)_0.33 (1) have been recognized as the fast in-plane C₆ rotation due to metal-π interactions with pore walls. The benzene- d₆ absorption enthalpy due to Sn···π interactions has been determined as -Δ H = 5.9 kcal/mol. Specific interactions between pyridine and the pore walls of 1 have been observed as immobile pyridine, the population of which grows strongly at low temperatures to show thermodynamic parameters -Δ H of 5.0 kcal/mol and Δ S of -11.0 e.u. It has been suggested that these parameters characterize N···H-OP hydrogen bonding as a driving force for accumulation of immobile pyridine molecules in pores of compound 1.

Layered metal(IV) phosphonate materials: Solid-state 1 H, 13 C, 31 P NMR spectra and NMR relaxation

Multinuclear solid-state NMR and powder X-ray diffraction data collected for phosphonate materials Zr(O₃ PC₆ H₄ PO₃ ) · 3.6H₂ O and Sn(O₃ PC₆ H₄ PO₃ )_0.85 (O₃ POH)_0.30  · 3.09H₂ O have resulted in the layered structure, where the phosphonic acids cross-link the layers. The main structural motif (the 111 connectivity in the PO₃ group) has been established by determination of chemical shift anisotropy parameters for phosphorus nuclei in the phosphonate groups. An analysis of the variable-temperature ³¹ P T₁ measurements and the shapes of the phosphorus resonances in the ³¹ P static NMR spectra have resulted in the dipolar mechanism of the phosphorus spin-lattice relaxation, where the rotating phenylene rings reorient dipolar vectors P^… H as a driving force of the relaxation process. It has been found that water protons do not affect the ³¹ P T₁ times. The activation energy of the phenylene rotation in both compounds has been determined as low as 12.5 kJ/mol. The interpretation of the phosphorus relaxation data has been independently confirmed by the measurements of ¹ H T₁ times for protons of the phenylene rings.

Definition of green synthetic tools based on safer reaction media, heterogeneous catalysis, and flow technology

Green/Sustainable Chemistry is the scientific platform where chemists are contributing from different areas to develop modern and efficient processes aimed at minimizing the environmental impact of chemical production. To reach these goals scientists, from both academia and industry, need to strongly focus their fundamental and innovative research towards the application of modern principles of Green Chemistry. In this contribution a description of our efforts in this direction is presented.

Starch assisted palladium(0) nanoparticles as in situ generated catalysts for room temperature Suzuki–Miyaura reactions in water

The in situ generated PdNPs show excellent catalytic activity in Suzuki–Miyaura cross coupling reaction of electronically diversified arylbromides and arylboronic acids in water at room temperature with low catalyst loading.