Porous organic polymers-based fluorescent chemosensors for Fe(III) ions-a functional mimic of siderophores

Extended organic polymers such as amorphous Covalent Organic Polymers (COPs) and crystalline Covalent Organic Frameworks (COFs) are emerging functional polymeric materials that have recently been shown promises as luminescent materials for chemosensing applications. A wide variety of luminescence COPs and COFs have been synthesized and successfully used as fluorescence-sensing materials for hazardous environmental pollutants and toxic contaminants. This review exemplifies various COPs and COFs-based fluorescence sensors for selective sensing of Fe(III) ions. The fluorescence sensors are sorted according to their structural features and each section provides a detailed discussion on the synthesis and fluorescence sensing ability of different COPs and COFs towards Fe(III) ions. Also, this review highlights the limitations of the existing organic polymer-based chemosensors and future perspectives on translating COPs and COFs-based fluorescence sensors for the practical detection of Fe(III) ions.

Label-Free Detection of Unbound Bilirubin and Nitrophenol Explosives in Water by a Mechanosynthesized Dual Functional Zinc Complex: Recognition of Picric Acid in Various Common Organic Media

High levels of unconjugated bilirubin (UB) in serum lead to asymptomatic and neonatal jaundice and brain dysfunctions. Herein, we have reported the detection of UB at as low as 1 μM in an aqueous alkaline medium using a Zn(II) complex. The specificity of the complex has been validated by the HPLC in the concentration window 6-90 μM, which is rare. The sensory response of the probe at physiological pH against nitro explosives developed it as an instant-acting fluorosensor for picric acid (PA) and 2,4-dinitrophenol (2,4-DNP). Spectroscopic titration provided a binding constant of 4×105  M-1 with PA. The naked eye detection was found to be 15 μM. The solid-state photoluminescent nature of the complex enabled it for PA sensing in the solid phase. Interestingly, the probe remained fluorescent in various volatile and non-volatile organic solvents. As a result, it can also detect PA and 2,4-DNP in a wide range of common organic media. NMR studies revealed the coordination of PA, 2,4-DNP, and UB to the Zn(II) center of the probe, which is responsible for the observed quenching of the probe with the analytes.

An extensive experimental and DFT studies on highly selective detection of nitrobenzene through deferasirox based new fluorescent sensor

A deferasirox based substituted triazole amine sensor TAD has been synthesized for the highly selective detection of nitrobenzene in real samples. Sensor TAD exhibited selective quenching response against nitrobenzene among the other nitroaromatic compounds (NACs). Photoinduced electron transfer (PET) process was devised as plausible sensing mechanisms which was supported via UV-visible and fluorescence spectroscopy, 1H NMR titration experiment, density functional theory (DFT) analysis and Job's plot. Non-covalent interaction (NCI) analysis and Bader's quantum theory of atoms in molecules (QTAIM) analysis were performed to investigate the presence of non-covalent interactions and symmetry perturbation theory (SAPT0) was performed for energy decomposition and quantitative analysis of interaction energies between sensor TAD and NB. Furthermore, sensor TAD was practically applied for the identification of NB in real samples.

A Metal-Free Triazacoronene-Based Bimodal VOC Sensor

Developing suitable sensors for selective and sensitive detection of volatile organic compounds (VOCs) is crucial for monitoring indoor and outdoor air quality. VOCs are very harmful to our health upon inhalation or contact. Bimodal sensor materials with more than one transduction capability (optical and electrical) offer the ability to extract complementary information from the individual analyte, thus improving detection accuracy and performance. The privilege of manipulating the optoelectronic properties of the polycyclic aromatic hydrocarbon-based semiconducting materials offers rapid signal transduction in multimodal sensing applications. A thiophene-functionalized triazacoronene (TTAC) donor-acceptor-donor (D-A-D) type sensor is reported here for VOC sensing. The single-crystal X-ray structure analysis of the TTAC revealed that a distinctive supramolecular polymer architecture was formed because of cooperative π-π and intermolecular D-A interactions and exhibited rapid signal transduction upon exposure to specific VOCs. The TTAC-embedded green luminescent paper-based test strip exhibited an on-off fluorescence response upon nitrobenzene vapor exposure for 120 s. The selective and rapid response is due to the fast photoinduced electron transfer, as is evident from the time-resolved excited-state dynamics and density functional theory studies. The thick-film-based prototype chemiresistive sensor detects harmful VOCs in a custom-made gas sensing system including benzene, toluene, and nitrobenzene. The TTAC sensor rapidly responds (200 s) at relatively low temperatures (180 οC) compared to other reported metal-oxide-based sensors.

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Facile construction of an anthracene-decorated highly luminescent coordination polymer for the selective detection of explosive nitroaromatics and the mutagenic pollutant TNP

Explosive nitroaromatic compounds (epNACs) are a group of chemicals that have caused significant human casualties through terrorist attacks and they also pose health risks. For the benefit of homeland security and environmental health, there is room for advancing research on the precise detection of epNACs. Coordination polymers (CPs) successfully serve this purpose because of their binding abilities and quenching capabilities. In this regard, a one-dimensional (1D) CP [Zn(bdc)(avp)2(H2O)]n (1; H2bdc = 1,4-benzenedicarboxylic acid and avp = 4-[2-(9-anthryl)vinyl]pyridine) was synthesized, which remarkably demonstrated extremely efficient ratiometric and selective sensing capacity toward epNACs and the mutagenic pollutant 2,4,6-trinitrophenol (TNP) with a quick response. Density functional theory (DFT) calculations provided a thorough analysis of the mechanistic routes behind the quenching reaction. Herein, geometrically accessible interaction sites were strategically decorated using anthracene moieties, allowing the quick and precise detection of explosive nitro derivatives and the carcinogenic pollutant TNP with increased sensitivity.

Pyrene-bridged acenaphthenes: synthesis and properties of a diacenaphtho[1,2-e:1',2'-l]pyrene and its symmetrical nitrogen analogue

The considerable need for novel polyaromatic hydrocarbons (PAHs) for applications in the area of organic electronics remains unchanged. Diacenaphthopyrene represents a new PAH consisting of two acenaphthylene units connected by a pyrene bridge. The system is built up by Pd-catalyzed cross-coupling, followed by acid catalyzed cyclosiomerization to generate the pyrene moiety. The new fused scaffold is formed in the last step in convincing yields by means of CH-activation. We additionally synthesized one aza-pyrene based analogue. The two hitherto unknown PAHs were investigated in detail by UV-Vis and PL spectroscopy, CV measurements and DFT calculations. Based on these results, the abilities of the novel structure as well as the effect of incorporation of nitrogen were evaluated.

Recent advances in fluorescence-based chemosensing of organoarsenic feed additives using luminescence MOFs, COFs, HOFs, and QDs

Organoarsenics are low-toxicity compounds that are used widely as feed additives to promote livestock growth, enhance meat pigmentation, and fight against intestinal parasites. The organoarsenic compounds are commonly found in poultry waste and the degradation of organoarsenic produces the toxic carcinogen inorganic arsenic such as As(V) and As(III), which results in severe arsenic pollution of soil and groundwater. As a consequence, there exists a high necessity to develop suitable sensing methods for the trace detection and quantification of organoarsenic feed additives in wastewater. Among various detection methods, in particular, fluorescence-based sensing has become a popular and efficient method used extensively for sensing water contaminants and environmental contaminants. In the recent past, a wide variety of fluorescence chemosensors have been designed and employed for the efficient sensing and quantification of the concentration of organoarsenic feed additives in different environmental samples. This review article systematically highlights various fluorescence chemosensors reported to date for fluorescence-based sensing of organoarsenic feed additives. The fluorescence sensors discussed in this review are classified and grouped according to their structures and functions, and in each section, we provide a detailed report on the structure, photophysics, and fluorescence sensing properties of different chemosensors. Lastly, the future perspectives on the design and development of practically useful sensor systems for selective and discriminative sensing of organoarsenic compounds have been stated.

Recent Development on Sensing Strategies for Small Molecules Detections

Sensors play a critical role in the detection and monitoring of various substances present in our environment, providing us with valuable information about the world around us. Within the field of sensor development, one area that holds particular importance is the detection of small molecules. Small molecules encompass a wide range of organic or inorganic compounds with low molecular weight, typically below 900 Daltons including gases, volatile organic compounds, solvents, pesticides, drugs, biomarkers, toxins, and pollutants. The accurate and efficient detection of these small molecules has attracted significant interest from the scientific community due to its relevance in diverse fields such as environmental pollutants monitoring, medical diagnostics, industrial optimization, healthcare remedies, food safety, ecosystems, and aquatic and terrestrial life preservation. To meet the demand for precise and efficient monitoring of small molecules, this summary aims to provide an overview of recent advancements in sensing and quantification strategies for various organic small molecules including Hydrazine, Glucose, Morpholine, Ethanol amine, Nitrosamine, Oxygen, Nitro-aromatics, Phospholipids, Carbohydrates, Antibiotics, Pesticides, Drugs, Adenosine Triphosphate, Aromatic Amine, Glutathione, Hydrogen Peroxide, Acetone, Methyl Parathion, and Thiophenol. The focus is on understanding the receptor sensing mechanism, along with the electrical, optical, and electrochemical response. Additionally, the variations in UV-visible spectral properties of the ligands upon treatment with the receptor, fluorescence and absorption titration analysis for limit of detection (LOD) determination, and bioimaging analysis are discussed wherever applicable. It is anticipated that the information gathered from this literature survey will be helpful for the perusal of innovation regarding sensing strategies.

Application of aza-BODIPY as a Nitroaromatic Sensor

Nitroaromatic explosive detection with high sensitivity and selectivity is requisite for civilian and military safety and the ecosystem. In this study, aza boron dipyrromethene (aza-BODIPY) dye was selected as a fluorescent-based chemosensor against nitroaromatic compounds (NACs) including 2,4,6-trinitrophenol (picric acid, TNP), 2,4,6-trinitrotoluene (TNT), and 2,4-dinitrotoluene (DNT). This dye molecule exhibits sharp fluorescent behavior with high quantum yields beyond the near-infrared region (NIR) and is considered as a potential candidate for the detection of NACs. O'Shea's approach was used to synthesize tetraphenyl-conjugated aza-BODIPY molecules. Quenching of fluorescence emission of aza-BODIPY at 668 nm after the exposure to NACs was investigated under acetonitrile-water and acetonitrile-ethanol solvent conditions. The quenching responses and its mechanism were examined by considering the Stern-Volmer relationship Stern-Volmer constants (K_sv) for TNP (in water), TNP (in ethanol), TNT, and DNT, which are predicted to be 1420, 1215, 1364, and 968 M^-1, respectively, all of which are sufficiently above the limit of detection (LOD) values. Thus, the present study opens up the possibility of the usage of aza-BODIPY molecules as a low-cost, light-weight sensor for the detection of NAC explosives.

Unraveling the photophysical characteristics and biological applications of vinyl sulfones as viscosity sensors

For the first time, a series of vinyl sulfone-NH2-based push-pull fluorophores (4a-4d) were introduced for their potential use in biological applications. The fluorophores 4a-4d were readily synthesized upon reduction of the corresponding vinyl sulfones-NO2 (3a-3d), which were prepared by sulfonylation of nitrostyrene. Both types of probes can be prepared in high yields through a few steps with minimal cost. In diverse solvents, probes 4a-4d exhibited fluorescence with strong emission peaking around 403-490 nm. Additionally, the fluorescence intensity of probe 4d rose approximately 85-fold with increasing viscosity. The probes 4a-4d demonstrated good stability and photostability in a broad pH range. Moreover, probes 4a-4d showed significantly improved biocompatibility compared to those derived from 3a-3d. For cell imaging applications, the developed probes 4a-4d exhibited much stronger blue fluorescence in cancer cells (HepG2) compared to 3a-3d. In addition, probes 4a-4d exhibited low cytotoxicity within 24 h toward both cancer and normal cells (HEK-293). Interestingly, probe 4d showed great sensitivity to viscosity in cancer cells. As a result, readily prepared vinyl sulfone-NH2-based push-pull fluorophores (4a-4d) offer a promising strategy for further development as cancer cell staining agents.

Room-Temperature, Copper-Free, and Amine-Free Sonogashira Reaction in a Green Solvent: Synthesis of Tetraalkynylated Anthracenes and In Vitro Assessment of Their Cytotoxic Potentials

The multifold Sonogashira coupling of a class of aryl halides with arylacetylene in the presence of an equivalent of Cs₂CO₃ has been accomplished using a combination of Pd(CH₃CN)₂Cl₂ (0.5 mol %) and cataCXium A (1 mol %) under copper-free and amine-free conditions in a readily available green solvent at room temperature. The protocol was used to transform several aryl halides and alkynes to the corresponding coupled products in good to excellent yields. The rate-determining step is likely to involve the oxidative addition of Ar-X. The green protocol provides access to various valuable polycyclic aromatic hydrocarbons (PAHs) with exciting photophysical properties. Among them, six tetraalkynylated anthracenes have been tested for their anticancer properties on the human triple-negative breast cancer (TNBC) cell line MDA-MB-231 and human dermal fibroblasts (HDFs). The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay was performed to find out the IC₅₀ concentration and lethal dose. The compounds being intrinsically fluorescent, their cellular localization was checked by live cell fluorescence imaging. 4',6-Diamidino-2-phenylindole (DAPI) and propidium iodide (PI) staining was performed to check apoptosis and necrosis, respectively. All of these studies have shown that anthracene and its derivatives can induce cell death via DNA damage and apoptosis.

A luminescent Cu4 cluster film grown by electrospray deposition: a nitroaromatic vapour sensor

We present the fabrication and use of a film of a carborane-thiol-protected tetranuclear copper cluster with characteristic orange luminescence using ambient electrospray deposition (ESD). Charged microdroplets of the clusters produced by an electrospray tip deposit the clusters at an air-water interface to form a film. Different microscopic and spectroscopic techniques characterized the porous surface structure of the film. Visible and rapid quenching of the emission of the film upon exposure to 2-nitrotoluene (2-NT) vapours under ambient conditions was observed. Density functional theory (DFT) calculations established the favourable binding sites of 2-NT with the cluster. Desorption of 2-NT upon heating recovered the original luminescence, demonstrating the reusability of the sensor. Stable emission upon exposure to different organic solvents and its quenching upon exposure to 2,4-dinitrotoluene and picric acid showed selectivity of the film to nitroaromatic species.

Microwave-assisted C-C bond formation of diarylacetylenes and aromatic hydrocarbons on carbon beads under continuous-flow conditions

The synthesis of polycyclic aromatic compounds generally requires stoichiometric oxidants or homogeneous metal catalysts, however, the risk of contamination of inorganic residues can affect their properties. Here we present a microwave (MW)-assisted platinum on beaded activated carbon (Pt/CB)-catalyzed C-C bond formation of diarylacetylenes and aromatic hydrocarbons under continuous-flow conditions. Various fused aromatic compounds were continuously synthesized via dehydrogenative C(sp²)-C(sp²) and C(sp²)-C(sp³) bond formation with yields of up to 87% without the use of oxidants and bases. An activated, local reaction site on Pt/CB in the flow reaction channel reaching temperatures of more than three hundred degrees Celsius was generated in the catalyst cartridge by selective microwave absorption in CB with an absorption efficiency of > 90%. Mechanistic experiments of the transformation reaction indicated that a constant hydrogen gas supply was essential for activating Pt. This is an ideal reaction with minimal input energy and no waste production.

A water-soluble small molecular fluorescent sensor based on phosphazene platform for selective detection of nitroaromatic compounds

Nitro-aromatic compounds have a deleterious effect on the environment and they are extremely explosive. Therefore, societal concern about exposure to nitro-aromatic compounds encourages researchers to develop selective and sensitive detection platforms for nitro-aromatic compounds in recent years. In this paper, a new 100% water-soluble cyclotriphosphazene-based bridged naphthalene material (4) was prepared as a small molecule fluorescent sensor for ultra-selective detection of nitro-aromatic compounds. The chemical structure of 4 was extensively characterized by mass spectrometry and nuclear magnetic resonance spectroscopies (³¹P, ¹³C, ¹H). The photo-physical properties of the newly developed sensing system were investigated by steady-state fluorescence and UV-Vis absorption spectroscopies. The fluorescence sensor behaviors were extensively evaluated after treatment with the most commonly used metal cations, anions, competitive aromatic compounds, saccharides, and organic acids. The developed fluorescent sensing system (4) demonstrated ultra-selective fluorescence "turn-off" signal change toward nitro-aromatic compounds while other tested competitive species caused negligible changes. To evaluate selectivity, time-resolved, steady-state 3D-fluorescence and UV-Vis absorption spectroscopies were used in fully aqueous media. Moreover, theoretical calculations (density functional theory and time-dependent density functional theory) were applied and discussed to identify fluorescence sensing mechanisms toward nitroaromatic compounds for the presented sensing system.

Recent advances in fluorescence chemosensors for ammonia sensing in the solution and vapor phases

Developing low-cost and reliable sensor systems for the detection of trace amounts of toxic gases is an important area of research. Ammonia (NH₃) is a commonly produced industrial chemical and a harmful colorless pungent gas released from various manufacturing and processing industries. Continuous exposure to NH₃ vapor causes serious menace to human health, microorganisms, and the ecosystem. Exposure to relatively higher concentrations of NH₃ severely affects the respiratory system and leads to kidney failure, nasal erosion ulcers, and gastrointestinal diseases. Excessive accumulation of NH₃ in the biosphere can cause various metabolic disruptions. As a consequence of this, therefore, suitable sensing methods for selective detection and quantification of trace amounts of NH₃ are of utmost need to protect the environment and living systems. Given this, there have been significant research advances in the preceding years on the development of fluorescence chemosensors for efficient sensing and monitoring of the trace concentration of NH₃ both in solution and vapor phases. This review article highlights several fluorescence chemosensors reported until recently for sensing and quantifying NH₃ in the vapor phase or ammonium ions (NH₄⁺) in the solution phase. The wide variety of fluorescence chemosensors discussed in this article are systematically gathered according to their structures, functional properties, and fluorescence sensing properties. Finally, the usefulness and existing challenges of using the fluorescence-based sensing method for NH₃ detection and the future perspective on this research area have also been highlighted.

A Highly Efficient Fluorescent Sensor Based on AIEgen for Detection of Nitrophenolic Explosives

The detection of nitrophenolic explosives is important in counterterrorism and environmental protection, but it is still a challenge to identify the nitroaromatic compounds among those with a similar structure. Herein, a simple tetraphenylethene (TPE) derivative with aggregation-induced emission (AIE) characteristics was synthesized and used as a fluorescent sensor for the detection of nitrophenolic explosives (2, 4, 6-trinitrophenol, TNP and 2, 4-dinitrophenol, DNP) in water solution and in a solid state with a high selectivity. Meanwhile, it was found that only hydroxyl containing nitrophenolic explosives caused obvious fluorescence quenching. The sensing mechanism was investigated by using fluorescence titration and ¹H NMR spectra. This simple AIE-active probe can potentially be applied to the construction of portable detection devices for explosives.

A Novel Triphenylamine-Based Flavonoid Fluorescent Probe with High Selectivity for Uranyl in Acid and High Water Systems

Developing a fluorescent probe for UO₂²⁺, which is resistant to interference from other ions such as Cu²⁺ and can be applied in acidic and high-water systems, has been a major challenge. In this study, a "turn-off" fluorescent probe for triamine-modified flavonoid derivatives, 2-triphenylamine-3-hydroxy-4H-chromen-4-one (abbreviated to HTPAF), was synthesized. In the solvent system of dimethyl sulfoxide:H₂O (abbreviated to DMSO:H₂O) (v/v = 5:95 pH = 4.5), the HTPAF solution was excited with 364 nm light and showed a strong fluorescence emission peak at 474 nm with a Stokes shift of 110 nm. After the addition of UO₂²⁺, the fluorescence at 474 nm was quenched. More importantly, there was no interference in the presence of metal ions (Pb²⁺, Cd²⁺, Cr³⁺, Fe³⁺, Co²⁺, Th⁴⁺, La³⁺, etc.), especially Cu²⁺ and Al³⁺. It is worth noting that the theoretical model for the binding of UO₂²⁺ to HTPAF was derived by more detailed density functional theory (DFT) calculations in this study, while the coordination mode was further verified using HRMS, FT-IR and ¹HNMR, demonstrating a coordination ratio of 1:2. In addition, the corresponding photo-induced electron transfer (PET) fluorescence quenching mechanism was also proposed.

Rhenium(I)-Based Heteroleptic Pentagonal Toroid-Shaped Metallocavitands: Self-Assembly and Molecular Recognition Studies

A family of neutral, heteroleptic, dinuclear M₂LL'-type pentagonal toroid-shaped metallomacrocycles (1-8) were synthesized using flexible ditopic N donors (Lⁿ = L¹-L²), rigid bis-chelating ligands (H₂-L' = H₂-E), and Re₂(CO)₁₀ in a one-pot solvothermal self-assembly approach. The ligands and the metallomacrocycles were characterized using ATR-IR, electrospray ionization mass spectrometry, nuclear magnetic resonance, ultraviolet-visible, and emission spectroscopy methods. The molecular structures of 1, 2, 4, 6, and 7 were confirmed by an X-ray diffraction study and are similar to those of calix[5]arene. The cyclic inner cavities of the metallomacrocycles accommodate toluene/mesitylene/acetone/chlorobenzene as guest molecules that are stabilized by cumulative C-H···π and π···π interactions with the cyclic framework of metallomacrocycle. The photophysical properties of the ligands and the metallomacrocycles were studied. The host-guest recognition properties of metallocavitands 1, 2, 7, and 8 as a model host with phenol and nitrobenzene derivatives as guest molecules were studied by emission spectroscopy methods.

γ-Cyclodextrin-based [2]rotaxane stoppered with gold(I)-ethynyl complexation: phosphorescent sensing for nitroaromatics

A [2]rotaxane is assembled by γ-cyclodextrin (γ-CD) with threaded 1,4-diethynylbiphenyl and bulky Au(I)-phosphine stoppers. The phosphorescence of the [2]rotaxane has been observed in aerated aqueous solution and found to be quenched by nitroaromatics due to γ-CD-based co-binding, providing a sensitive approach towards explosive-sensing.

Fabrication and application of 2,4,6-trinitrophenol sensors based on fluorescent functional materials

2,4,6-Trinitrophenol (TNP) has been widely used for a long time. The adverse effects of TNP on ecological environment and human health have promoted researchers to develop various methods for detecting TNP. Among multifarious technologies utilized for the TNP detection, fluorescence strategy based on different functional materials has become an effective and efficient method attributed to its merits such as preferable sensitivity and selectivity, rapid response speed, simple operation, and lower cost, which is also the focus of review. This review summarizes the development status of fluorescence sensors for TNP in a detailed and systematic way, especially focusing on the research progress since 2015. The sensing properties of fluorescent materials for TNP are the core of this review, including nanomaterials, organic small molecules, emerging supramolecular systems, aggregation induced emission materials and others. Moreover, the development direction and prospect of fluorescence sensing method in the field of TNP detection are introduced and discussed at the end of review.

Theoretical Investigations on the Detecting Mechanism of a Typical 2,4,6-Trinitrophenol Fluorescence Sensor and Its Design Strategy

Fluorescence sensors based on small organic molecules are drawing increasing attention. In this contribution, the underlying detection mechanism of a typical fluorescence sensor for 2,4,6-trinitrophenol (TNP) based on fluorescence quenching is comprehensively investigated. The TNP molecule is proved to plant an intermolecular electron transfer state (dark state) below the bright state. Strong π-π interaction is observed between the sensor and TNP, which provides considerable orbital overlaps between the sensor and analyte. Electron transfer from the sensor to analyte is facilitated by such a strong interaction, which quenches the sensor's fluorescence. The design strategy for such TNP sensors is proposed based on the detection mechanism, and a series of new sensors is designed, which is likely to have better sensitivity than the original sensor.

Water-soluble ionic liquid as a fluorescent probe towards distinct binding and detection of 2,4,6-trinitrotoluene and 2,4,6-trinitrophenol in aqueous medium

Owing to the escalating threat of criminal activities and pollution aroused by 2,4,6-trinitrotoluene (TNT) and 2,4,6-trinitrophenol (TNP), development of a proficient sensor for the detection of these explosives is highly demanded. Herein, a water-soluble ionic liquid-tagged fluorescent probe, 1-ethyl-3-(3-formyl-4-hydroxybenzyl)-1H-benzimidazol-3-ium chloride (EB-IL) has been designed and synthesized for the detection of TNT and TNP in 100% aqueous medium. The EB-IL fluorescent probe displayed strong cyan-blue fluorescence at 500 nm which gets quenched upon the addition of TNT/TNP over other concomitant nitro-compounds. The distinct binding response of EB-IL towards TNT could be due to the formation of hydrogen bonding between the acidic proton of benzimidazolium (C2-H) and nitro group of TNT. Meanwhile, the selective binding of TNP with EB-IL could be due to the exchange of counter Cl^- anion of EB-IL with picrate anion. The fluorescence quenching of EB-IL by TNT could be attributed to the resonance energy transfer (RET) and that of TNP is ascribed to the anion-exchange process. The developed sensor is extremely selective and sensitive towards TNT and TNP with high quenching constants of 1.94 × 10⁵ M^-1 and 2.32 × 10⁶ M^-1 and shows a lower detection limit of 159 nM and 282 nM, respectively.

Pyrene-Functionalized Fluorescent Nanojars: Synthesis, Mass Spectrometric, and Photophysical Studies

Nanojars are a class of supramolecular coordination complexes based on pyrazolate, Cu2+, and OH- ions that self-assemble around highly hydrophilic anions and serve as efficient anion binding and extraction agents. In this work, the synthesis, characterization, and photophysical properties of pyrene-functionalized fluorescent nanojars are presented. Three pyrene derivatives, 4-(pyren-1-yl)pyrazole (HL1), 4-(5-(pyren-1-yl)pent-4-yn-1-yl)pyrazole (HL2), and 4-(3-(pyrazol-4-yl)propyl)-1-(pyren-1-yl)-1,2,3-triazole (HL3), and the corresponding nanojars were synthesized and characterized using nuclear magnetic resonance spectroscopy and mass spectrometry. Electronic absorption, steady-state, and time-resolved fluorescence measurements were carried out to understand the interaction between the pyrene fluorophore and copper nanojars. Optical absorption measurements have shown minor ground state interaction between the fluorophore and nanojars. The fluorescence of pyrene is significantly quenched when attached to nanojars, suggesting strong contribution from the paramagnetic Cu2+ ions. Significant static quenching is observed in the case of L1, when pyrene is directly bound to the nanojar, whereas in the case of L2 and L3, when pyrene is attached to the nanojars using flexible tethers, both static and dynamic quenching are observed.

Selective Detection of Picric Acid and Pyrosulfate Ion by Nickel Complexes Offering a Hydrogen-Bonding-Based Cavity

This work describes the synthesis and characterization of three mononuclear nickel complexes supported with amide-based pincer ligands. All three complexes presented an H-bonding-based cavity due to the migration of amidic protons to the appended heterocyclic rings that formed H-bonds with the metal-ligated solvent molecule(s). These complexes functioned as the nanomolar chemosensors for the detection of picric acid and pyrosulfate ion as inferred by the detailed absorption and emission spectral studies while further supported with FTIR, NMR, and mass spectra of the isolated products. We also illustrate a few practical detection methods for the sensing of picric acid in the solution state as the naked-eye colorimetric methods and in the solid state by employing polystyrene films.

Multi-fold Sonogashira coupling: a new and convenient approach to obtain tetraalkynyl anthracenes with tunable photophysical properties

For the first time, a direct single-step one-pot route to access nine new symmetric tetraalkynylated anthracenes via Pd(CH₃CN)₂Cl₂/cataCXium®A catalyzed tetra-fold Sonogashira coupling is reported. Five of these tetraalkynylated anthracenes have been crystallographically characterized, with two of them exhibiting multiple interactions that significantly shorten the inter-planar distances in the solid-state structure. The rich photophysical properties exhibited by these molecules hold immense promise for future applications in sensors and optoelectronic devices. Two of the considered tetraalkynylated anthracenes comprising a D-π-A-π-D motif demonstrate solvatochromism and halochromism, with one of them showing a low bandgap of 1.79 eV. The remaining compounds demonstrate bandgaps in the range of 1.79-2.04 eV.

Role of the Weak Interactions during the 2,4,6-Trinitrophenol Detecting Process of a Fluorescein-Based Sensor

Achieving fast and precise fluorescence sensing of 2,4,6-trinitrophenol (TNP) is of fundamental importance for homeland security and environment protection. Weak interactions between the sensor and an analyte always play a critical role, which is capable of affecting the photophysics of the sensor. This study performs a thorough investigation on the effects of the weak interaction between TNP and a typical fluorescein-based sensor. The photophysics of the sensor before and after interacting with TNP is fully discussed by analyzing the potential energy surface (PES) of the sensor and rate constants of the excited-state dynamic processes. TNP is found to affect the PES greatly, which plants an intermolecular electron transfer state (dark state) below the bright state. The π-π interaction is proved to induce considerable orbital overlaps between the analyte and the sensor, which facilitates the electron transfer process and generates the dark state.

A multi-colorimetric probe to discriminate between heavy metal cations and anions in DMSO-H2O with high selectivity for Cu2+ and CN-: study of logic functions and its application in real samples

A ditopic multi-colorimetric probe based on the phenylpridyl-thioic moiety (EN) was synthesized via a Schiff base reaction mechanism and characterized using ¹H NMR and UV-vis spectroscopy. The colorimetric analyses carried out revealed that EN was capable of discriminating between a number of heavy metal cations via coordination induced charge transfer, as well as between anions through hydrogen bonding induced charge transfer, in DMSO–H₂O (9 : 1). In particular, the ditopic probe could spectrally and colorimetrically recognize the most toxic heavy metal cations of Cd²⁺, Pb²⁺ and Hg²⁺, among others, in DMSO–H₂O. Additionally, EN was selective and sensitive to the presence of CN⁻, F⁻, AcO⁻ and H₂PO₄⁻ in the same solvent system as cations. The reversibility and reproducibility studies showed that EN exhibited complementary IMP/INH logic functions, based on colour and spectral switching (ON/OFF), modulated by F⁻/Al³⁺. The real time application of the probe was tested on food grade products to detect the presence of F⁻ in toothpastes and mouthwash dissolved in water, as well as cations in underground water (normally saline), which displayed substantial responses. Thus, EN displayed an excellent scope of response and can thus be developed for real time sensing kits, which could be used instantly in on-field analysis. Theoretical studies were conducted to complement the experimental work.

A ditopic multi-colorimetric probe based on the phenylpridyl-thioic moiety (EN) was synthesized via a Schiff base reaction mechanism and characterized using ¹H NMR and UV-vis spectroscopy.