Quaternary PdCuNiP Porous Nanosheets with Enhanced Electrochemical Performance in the Ethanol Oxidation Reaction

The ability to manipulate metal electrocatalysts with satisfactory performance for the ethanol oxidation reaction (EOR) is promising but still unsatisfactory for practical application in direct ethanol fuel cells. Beyond traditional metal-metal alloys, we herein report a novel metal-nonmetal alloy electrocatalyst that takes advantage of quaternary PdCuNiP alloy composition and the ultrathin/porous nanosheet (NS) structure. The optimized PdCuNiP porous NSs feature more undercoordinated active sites and modified electron/function structures, enabling better antipoisoning ability. Under alkaline conditions, this electrocatalyst shows excellent electrochemical EOR performance with a high EOR activity of 4.05 A mg_Pd^-1 and a low activation energy of 21.2 kJ mol^-1, comparable to the state-of-the-art electrocatalysts reported in the literature. Meanwhile, PdCuNiP porous NSs are electrocatalytically active for electrochemical oxidation of other fuels (methanol, glycerol, and glucose), highlighting their great potential for various direct alcohol fuel cells. The findings reported here may put forward some insights into designing new functional electrocatalysts for various fuel cell electrocatalysis and beyond.

Low Pt-Doped Crystalline/Amorphous Heterophase Pd12P3.2 Nanowires as Efficient Catalysts for Methanol Oxidation

Pd-based catalysts are attractive anodic electrocatalysts for direct methanol fuel cells owing to their low cost and natural abundance. However, they suffer from sluggish reaction kinetic and insufficient electroactivity in methanol oxidation reaction (MOR). In this work, we developed a facile one-pot approach to fabricate low Pt-doped Pd₁₂P_3.2 nanowires with crystalline/amorphous heterophase (termed Pt-Pd₁₂P_3.2 NWs) for MOR. The unique crystalline/amorphous heterophase structures promote the catalytic activity by the plentiful active sites at the phase boundaries and/or interfaces and the synergistic effect between different phases. Moreover, the incorporation of trace Pt into Pd lattices modifies the electronic structure and improves the electron transfer ability. Therefore, the obtained Pt-Pd₁₂P_3.2 NWs display significantly enhanced electrocatalytic performance toward MOR with the mass activity of 2.35 A mg_Pd+Pt^-1, which is 9.0, 2.9, and 2.0 times higher than those of the commercial Pd/C (0.26 A mg_Pd^-1), Pd₁₂P_3.2 NWs (0.82 A mg_Pd^-1), and commercial Pt/C (1.19 A mg_Pt^-1). The high mass activity enables the Pt-Pd₁₂P_3.2 NWs to be the promising Pd-based catalysts for MOR.

Emerging interstitial/substitutional modification of Pd-based nanomaterials with nonmetallic elements for electrocatalytic applications

Palladium (Pd)-based nanomaterials have been identified as potential candidates for various types of electrocatalytic reaction, but most of them typically exhibit unsatisfactory performances. Recently, extensive theoretical and experimental studies have demonstrated that the interstitial/substitutional modification of Pd-based nanomaterials with nonmetallic atoms (H, B, C, N, P, S) has a significant impact on their electronic structure and thus leads to the rapid development of one kind of promising catalyst for various electrochemical reactions. Considering the remarkable progress in this area, we highlight the most recent progress regarding the innovative synthesis and advanced characterization methods of nonmetallic atom-doped Pd-based nanomaterials and provide insights into their electrochemical applications. What's more, the unique structure- and component-dependent electrochemical performance and the underlying mechanisms are also discussed. Furthermore, a brief conclusion about the recent progress achieved in this field as well as future perspectives and challenges are provided.

B-Doped PdRu nanopillar assemblies for enhanced formic acid oxidation electrocatalysis

Adjusting the morphology and composition of Pd-based materials is a promising strategy to improve their performance for the electrocatalytic formic acid oxidation reaction (FAOR). In this work, we report the preparation of B-doped PdRu nanopillar assemblies (B-PdRu NPAs) by a two-step method using NaBH4 as the boron dopant. On combining the hyper-branched structure and the multi-component synergistic effect, B-PdRu NPAs achieve a high mass activity of 1.09 mA μg-1Pd for the FAOR and retain 73.19% of the initial activity after 500 cycles, which is superior to undoped counterparts. The proposed synthesis strategy provides a simple method for the synthesis of metal-nonmetal nanomaterials with desired composition and design structure for electrocatalytic fields.

Unveiling Synergistic Effects of Interstitial Boron in Palladium-Based Nanocatalysts for Ethanol Oxidation Electrocatalysis

Alloying is one of the most promising routes for tuning the physicochemical properties of noble metal-based nanocatalysts and thus improving their (electro)catalytic performance. Despites numerous achievements, bimetallic and trimetallic nanoalloys have still been thoroughly studied for the past two decades. In this study, metalloid boron (B) was alloyed within palladium (Pd)-based nanocatalysts to promote the electrochemical ethanol oxidation reaction (EOR) in alkaline media. The optimum PdCuB nanocatalyst exhibited remarkable electrochemical EOR activity (5.83 A mg_Pd^-1) and good operation stability (both cycling and chronoamperometric studies). Mechanistic studies in both pure KOH and a KOH/ethanol mixture attributed superior EOR performance to positive synergistic effects of B in Pd-based nanocatalysts that kinetically accelerated the removal of poisoning ethoxy intermediates (the rate-determining step of EOR). They included (i) an electronic effect that changed the electronic structure of Pd and thus weakened the adsorption of poisoning ethoxy intermediates, (ii) a bifunctional effect that facilitated the adsorption of OH_ads and thus kinetically accelerated the further oxidation of poisoning intermediates, and (iii) a structural effect in which smaller B interstitially inserted into Pd-based nanocrystals and thus suppressed the physical Ostwald ripening processes.

Highly branched and defect-rich PdP nanosheets for ethanol oxidation electrocatalysis

Highly branched, defect-rich, and ultrathin PdP alloy nanosheets with enhanced electrocatalytic ethanol oxidation reaction (EOR) performance.

Ternary Palladium-Boron-Phosphorus Alloy Mesoporous Nanospheres for Highly Efficient Electrocatalysis

Alloying palladium (Pd) catalysts with various metalloid and nonmetal elements can improve their catalytic performance in different chemical reactions. However, current nanosynthesis methods can only generate Pd alloys containing one metalloid or nonmetal, which limits the types of element combinations that may be used to improve Pd-based nanocatalysts. Herein, we report a simple soft-templating synthetic strategy to co-alloy Pd with the metalloid boron (B) and the nonmetal phosphorus (P) to generate ternary PdBP mesoporous nanospheres (MSs) with three-dimensional dendritic frameworks. We use a one-step aqueous synthesis method where dimethylamine borane and sodium hypophosphite serve as the B and P sources, respectively, as well as the co-reducing agents to drive the nucleation and growth of ternary PdBP alloy on a sacrificial dioctadecyldimethylammonium chloride template. The concentration of metalloid to nonmetal and the diameters of dendritic MSs can be tailored. The synthetic protocol is also extended to other multicomponent PdMBP alloy MSs to generate different types of dendritic mesoporous frameworks. Boron and phosphorus are known to accelerate the kinetics of the electrochemical oxygen reduction reaction (ORR) and alcohol oxidation reactions (AORs), because their alloys promote the decomposition of oxygen-containing intermediates on Pd surfaces. The dendritic mesoporous morphology of the ternary PdBP MSs also accelerates electron/mass transfer and exposes numerous active sites, enabling better performance in the ORR and AORs. Extending the surfactant-templating synthetic route to multiple types of elements will enable the generation of libraries of multicomponent metal-metalloid-nonmetal alloy nanostructures with functions that are suitable for various targeted applications.

White phosphorus derived PdAu–P ternary alloy for efficient methanol electrooxidation

Ternary PdAu–P electrocatalysts are obtained by a novel white-phosphorus derived reduction method, exhibiting an excellent electrocatalytic performance for methanol electrooxidation.

Palladium–nickel catalysts based on ordered titanium dioxide nanorod arrays with high catalytic peformance for formic acid electro-oxidation

Here, a novel DFAFC anode catalyst is presented. Due to the 3D catalytic structure and alloying effect, the mass activity and long-term stability of the Pd₂Ni₃–TiO₂ towards FAO are higher than that of Pd–TiO₂ and commercial PdC.

Fabrication of Pd/P nanoparticle networks with high activity for methanol oxidation

The as-prepared Pd/P nanoparticle networks efficiently exhibit electrocatalytic activity and stability for methanol oxidation.