Synthesis, structure, morphology, magnetism, and magnetocaloric-effect studies of (La1−xPrx)0.7Sr0.3MnO3 nanocrystalline perovskites

Single-Phase (La1–xPrx)0.7Sr0.3MnO3 (x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) perovskites were synthesized by the sol–gel method followed by sintering at 700 °C for 5 h. Samples with x = 0.0–0.4 are found to crystallize into rhombohedral structure (R-3c space group) while the ones with x = 0.6–1.0 crystallize into orthorhombic structure (Pbnm space group). The average particle size of the samples was in the range of 21–44 nm. All samples exhibit a ferromagnetic to paramagnetic second-order magnetic phase transition at Curie temperature, which is found to decrease linearly with increasing the Pr concentration. The magnetic coercivity was found to be small (~ 10 Oe) for all the samples, at T < TC. The experimental effective paramagnetic moment (µeff) is found to increase with increasing x from 3.99 µB (x = 0.0) to 5.05 µB (x = 1.0). The magnitude of the maximum magnetic entropy change (−ΔSM)max. and the relative cooling power (RCP) for the samples having orthorhombic structure increases as x increases reaching a maximum value of 4.67 J/kg.K and 574 J/kg at ΔµoH = 9 T for x = 1.0. While the ones with the rhombohedral structure have the maximum values of (−ΔSM)max. and RCP of 4.63 J/kg.K and 472 J/kg at ΔµoH = 9 T are for x = 0.2. The large values of (−ΔSM)max. and RCP (at room temperature (RT)) and the wider temperature range of −ΔSM for the sample with x = 0.6 suggests that this compound may be considered as magnetic refrigerant material at RT, and the other compounds can be candidates in the vicinity of RT.

Smart Bone Graft Composite for Cancer Therapy Using Magnetic Hyperthermia

Magnetic hyperthermia (MHT) is a therapy that uses the heat generated by a magnetic material for cancer treatment. Magnetite nanoparticles are the most used materials in MHT. However, magnetite has a high Curie temperature (Tc~580 °C), and its use may generate local superheating. To overcome this problem, strontium-doped lanthanum manganite could replace magnetite because it shows a Tc near the ideal range (42–45 °C). In this study, we developed a smart composite formed by an F18 bioactive glass matrix with different amounts of Lanthanum-Strontium Manganite (LSM) powder (5, 10, 20, and 30 wt.% LSM). The effect of LSM addition was analyzed in terms of sinterability, magnetic properties, heating ability under a magnetic field, and in vitro bioactivity. The saturation magnetization (M_s) and remanent magnetization (M_r) increased by the LSM content, the confinement of LSM particles within the bioactive glass matrix also caused an increase in Tc. Calorimetry evaluation revealed a temperature increase from 5 °C (composition LSM5) to 15 °C (LSM30). The specific absorption rates were also calculated. Bioactivity measurements demonstrated HCA formation on the surface of all the composites in up to 15 days. The best material reached 40 °C, demonstrating the proof of concept sought in this research. Therefore, these composites have great potential for bone cancer therapy and should be further explored.

The Efficiency of Pd Addition and Sr Substitution on La1−xSrxMnO3 to Remove Ventilation Air Methane in a Catalytic Flow Reversal Reactor

Ventilation air methane (VAM) is the main cause of greenhouse gas emissions in coal mining. Catalytic flow reverse reactor (CFRR) is widely used in VAM to mitigate methane emissions. In this study, palladium (Pd) and La1−xSrxMnO3 were used as catalysts in a CFRR. Different types of catalysts were prepared by loading La0.8Sr0.2MnO3, La0.9Sr0.1MnO3, and 0.1%Pd-La0.9Sr0.1MnO3 on a cordierite honeycomb reactor coated with γ-Al2O3 to compare their performances. In addition, this study compared the performance of the three catalysts in an 800 °C reactor based on different methane inlet concentrations, inlet speeds, and conversion times. The results showed: (1) 0.1% addition of Pd increased methane conversion. (2) La0.8Sr0.2MnO3 had higher efficiency at lower methane inlet concentrations, whereas La0.9Sr0.1MnO3 was more efficient at higher methane concentrations. This study demonstrates that a higher Sr loading is worth implementing only when the methane concentration of VAM is lower than 0.6%. (3) To achieve a higher methane conversion efficiency, the inlet velocity of methane should also be considered.

Multifunctionality of lanthanum-strontium manganite nanopowder

Manganites are multifunctional materials which are widely used in both technology and devices. In this article, new prospects of their use as nanoparticles for various types of applications are demonstrated. For that, the ferromagnetic nanopowder of La_0.6Sr_0.4MnO₃ has been synthesized by the sol-gel method with a subsequent annealing at 700-900 °C. The crystal structure, phase composition and morphology of nanoparticles as well as magnetic, magnetothermal and electrocatalytic properties have been studied comprehensively. The critical sizes of superparamagnetic, single-domain, and multi-domain states have been determined. It has been established that an anomalously wide temperature range of magnetocaloric properties is associated with an additional contribution to the magnetocaloric effect from superparamagnetic nanoparticles. The maximum values of the specific loss power are observed in the relaxation hysteresis region near the magnetic phase transition temperature. The electrochemical stability and features of the decomposition of nanoparticles in 1 M KOH and Na₂SO₄ electrolytes have been determined. A decrease in the particle size contributes to an increase in electrocatalytic activity for overall water splitting. Magnetocaloric and electrocatalytic results of the work indicate the prospects for obtaining the possibility of changing the temperature regime of electrocatalysis using contactless heating or cooling.

Recent advancements in manganite perovskites and spinel ferrite-based magnetic nanoparticles for biomedical theranostic applications

Recently, magnetic nanoparticles (MNPs) based on manganite perovskites (La_1-xSr_xMnO₃ or LSMO) and/or spinel ferrites (i.e. SPFs with the formula MFe₂O₄; M=Co, Mg, Mn, Ni and Zn and mixed SPFs (e.g. Co-Zn, Mg-Mn, Mn-Zn and/or Ni-Zn)) have garnered great interest in magnetic hyperthermia therapy (MHT) as heat-inducing agents due to their tuneable magnetic properties including Curie temperature (T _c) to generate controllable therapeutic temperatures (i.e. 42 °C-45 °C)-under the application of an alternating magnetic field (AMF)-for the treatment of cancer. In addition, these nanoparticles are also utilized in magnetic resonance imaging (MRI) as contrast-enhancing agents. However, the employment of the LSMO/SPF-based MNPs in these MHT/MRI applications is majorly influenced by their inherent properties, which are mainly tuned by the synthesis factors. Therefore, in this review article, we have systematically discussed the significant chemical methods used to synthesize the LSMO/SPF-based MNPs and their corresponding intrinsic physicochemical properties (size/shape/crystallinity/dispersibility) and/or magnetic properties (including saturation magnetization (M _s)/T _c). Then, we have analyzed the usage of these MNPs for the effective imaging of cancerous tumors via MRI. Finally, we have reviewed in detail the heating capability (in terms of specific absorption rate) of the LSMO/SPF-based MNPs under calorimetric/biological conditions for efficient cancer treatment via MHT. Herein, we have mainly considered the significant parameters-such as size, surface coating (nature and amount), stoichiometry, concentration and the applied AMFs (including amplitude (H) and frequency (f))-that influence the heat induction ability of these MNPs.

Hyperthermia properties of hyaluronic acid-coated La0.7Sr0.3−xBaxMnO3 nanoparticles

The heating efficiency of LSMO nanoparticles for hyperthermia was improved drastically by doping Ba ions.

Interplay between superparamagnetic and blocked behavior in an ensemble of lanthanum–strontium manganite nanoparticles

Magnetic nanoparticles constitute promising tools for addressing medical and health-related issues based on the possibility to obtain various kinds of responses triggered by safe remote stimuli.

Improving the crystallinity and magnetocaloric effect of the perovskite La0.65Sr0.35MnO3 using microwave irradiation

MW heating produces materials that are superior in terms of both structure and magnetic properties.

LSMO Nanoparticles Coated by Hyaluronic Acid for Magnetic Hyperthermia

Magnetic hyperthermia with the treating temperature range of 41-46 °C is an alternative therapy for cancer treatment. In this article, lanthanum strontium manganates (La_1-x Sr _x MnO₃, 0.25 ≤ × ≤ 0.35) magnetic nanoparticles coated by hyaluronic acid (HA) which possesses the ability of targeting tumor cells were prepared by a simple hydrothermal method combined with a high-energy ball milling technique. The crystal structure, morphology, magnetic properties of the HA-coated magnetic nanoparticles (MNPs), and their heating ability under alternating magnetic field were investigated. It was found the HA-coated La_0.7Sr_0.3MnO₃, with particle diameter of ~100 nm, Curie temperature of 45 °C at a concentration 6 mg/ml, gave the optimal induction heating results. The heating temperature saturates at 45.7 °C, and the ESAR is 5.7 × 10^-3 W/g · kHz · (kA/m²) which is much higher than other reported results.