Ab Initio Investigation of the Adsorption and Dissociation of O2 on Cu-Skin Cu3Au(111) Surface

Surface adsorption and dissociation processes can have a decisive impact on the catalytic properties of metal alloys. We have used density functional theory to investigate the adsorption and dissociation of O2 on Cu-skin Cu3Au(111) surface. The calculated results show that the b-f(h)-b adsorption configuration is the most energetically favorable on the Cu-skin Cu3Au(111) surface. For O2 dissociation, there are two thermodynamically favorable dissociation paths. One path is from b-f-b to two O atoms in hcp sites, and the other path is from b-h-b to two O atoms in fcc sites. Moreover, the stability of O2 adsorption is higher and the dissociation energy barrier of the adsorbed O2 is lower as compared to those on the Cu(111) surface. This theoretical work provides valuable guidance for the practical application of Cu-Au alloys as highly efficient CO oxidation catalysts.

Adsorbate-Induced Segregation of Cobalt from PtCo Nanoparticles: Modeling Au Doping and Core AuCo Alloying for the Improvement of Fuel Cell Cathode Catalysts

Platinum, when used as a cathode material for the oxygen reduction reaction, suffers from high overpotential and possible dissolution, in addition to the scarcity of the metal and resulting cost. Although the introduction of cobalt has been reported to improve reaction kinetics and decrease the precious metal loading, surface segregation or complete leakage of Co atoms causes degradation of the membrane electrode assembly, and either of these scenarios of structural rearrangement eventually decreases catalytic power. Ternary PtCo alloys with noble metals could possibly maintain activity with a higher dissolution potential. First-principles-based theoretical methods are utilized to identify the critical factors affecting segregation in Pt-Co binary and Pt-Co-Au ternary nanoparticles in the presence of oxidizing species. With a decreasing share of Pt, surface segregation of Co atoms was already found to become thermodynamically viable in the PtCo systems at low oxygen concentrations, which is assigned to high charge transfer between species. While the introduction of gold as a dopant caused structural changes that favor segregation of Co, creation of CoAu alloy core is calculated to significantly suppress Co leakage through modification of the electronic properties. The theoretical framework of geometrically different ternary systems provides a new route for the rational design of oxygen reduction catalysts.

Bimetallic PtAu electrocatalysts for the oxygen reduction reaction: challenges and opportunities

Highly active, durable oxygen reduction reaction (ORR) electrocatalysts have an essential role in promoting the continuous operation of advanced energy technologies such as fuel cells and metal-air batteries. Considering the scarce reserve of Pt and its unsatisfactory overall performance, there is an urgent demand for the development of new generation ORR electrocatalysts that are substantially better than the state-of-the-art supported Pt-based nanocatalysts, such as Pt/C. Among various nanostructures, bimetallic PtAu represents one unique alloy system where highly contradictory performance has been reported. While it is generally accepted that Au may contribute to stabilizing Pt, its role in modulating the intrinsic activity of Pt remains unclear. This perspective will discuss critical structural issues that affect the intrinsic ORR activities of bimetallic PtAu, with an eye on elucidating the origin of seemingly inconsistent experimental results from the literature. As a relatively new class of electrodes, we will also highlight the performance of dealloyed nanoporous gold (NPG) based electrocatalysts, which allow a unique combination of structural properties highly desired for this important reaction. Finally, we will put forward the challenges and opportunities for the incorporation of these advanced electrocatalysts into membrane electrode assemblies (MEA) for actual fuel cells.

Optimization of gold-palladium core-shell nanowires towards H2O2 reduction by adjusting shell thickness

Designable bimetallic core-shell nanoparticles exhibit superb performance in many fields including industrial catalysis, energy conversion and chemical sensing, due to their outstanding properties associated with their tunable electronic structure. Herein, Au-Pd core-shell (Au_richPd@AuPd_rich) nanowires (NWs) were synthesized through a one-pot facile chemical reduction method in the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. The thickness of the Pd shell could be adjusted by directly controlling the Au/Pd feeding ratio while maintaining the nanowire morphology. The as-obtained Au₇₅Pd₂₅ core-shell NWs with a thin Pd_rich shell showed significantly enhanced activities towards the reduction of hydrogen peroxide with the sensitivity reaching 338 μA cm^-2 mM^-1 and a linear range up to 10 mM. In sum, Pd shell thickness could be used to adjust the electronic structure, thereby optimizing the catalytic activity.

Thermal Properties and Segregation Behavior of Pt Nanowires Modified with Au, Ag, and Pd Atoms: A Classical Molecular Dynamics Study

Platinum nanowires (NWs) have been reported to be catalytically active toward the oxygen reduction reaction (ORR). The edge modification of Pt NWs with metals M (M = Au, Ag, or Pd) may have a positive impact on the overall ORR activity by facilitating diffusion of adsorbed oxygen, O_ads, and hydroxyl groups, OH_ads, between the {001} and {111} terraces. In the present study, we have employed classical molecular dynamics simulations to investigate the segregation behavior of Au, Ag, and Pd decorating the edges of Pt NWs. We observe that, under vacuum conditions, Pd prefers to diffuse toward the core rather than stay on the NW surface. Ag and Au atoms are mobile at temperatures as low as 900 K; they remain on the surface but do not appear to be preferentially more stable at edge sites. To effect segregation of Au and Ag atoms toward the edge, we propose annealing in the presence of different reactive gas environments. Overall, our study suggests potential experimental steps required for the synthesis of Pt nanowires and nanoparticles with improved O_ads and OH_ads interfacet diffusion rates and consequently an improved ORR activity.

Nanoscale mechanism of the stabilization of nanoporous gold by alloyed platinum

Nanoporous gold (NPG) is usually made by electrochemical dealloying of Ag from binary AgAu alloys. The resulting nanoscale ligaments are not very stable, and tend to coarsen with time by surface self-diffusion, especially in electrolyte, which may lead to inferior electrocatalytic properties. Addition of a small amount of Pt to the precursor alloy is known to refine and stabilize the nanoporous product (NPG-Pt). However, the mechanisms by which Pt serves to refine the microstructure remain poorly understood. The present study aims to expand our knowledge of the role of Pt by examining NPG-Pt at atomic resolution with Atom Probe Tomography (APT), as well as by aberration-corrected Transmission Electron Microscopy. Atomic level observation of Pt enrichment on ligament surfaces sheds light on the underlying mechanisms that give rise to Pt's refining effect. Owing to improved Ag retention with higher Pt content, NPG-Pt₁ (made by dealloying Ag₇₇Au₂₂Pt₁) was shown to have the highest surface area-to-volume ratio, compared to NPG-Pt₃ (made by dealloying Ag₇₇Au₂₀Pt₃). Quantitative estimates reveal up to 5-fold enrichment of Pt at nanoligament surfaces, compared to the precursor content, in NPG-Pt. The interface between the dealloyed layer and the substrate was captured by APT, for the first time. The findings of this investigation add insight into the functionality of NPG-Pt and its prospective catalytic performance.

Computational Screening of Doped α-MnO2 Catalysts for the Oxygen Evolution Reaction

Minimizing energy and materials costs for driving the oxygen evolution reaction (OER) is paramount for the commercialization of water electrolysis cells and rechargeable metal-air batteries. Structural stability, catalytic activity, and electronic conductivity of pure and doped α-MnO₂ for the OER are studied using density functional theory calculations. As model surfaces, we investigate the (110) and (100) facets, on which three possible active sites are identified: a coordination unsaturated, a bridge, and a bulk site. For pure and Cr-, Fe-, Co-, Ni-, Cu-, Zn-, Cd-, Mg-, Al-, Ga-, In-, Sc-, Ru-, Rh-, Ir-, Pd-, Pt-, Ti-, Zr-, Nb-, and Sn-doped α-MnO₂ , the preferred valence at each site is imposed by adding/subtracting electron donors (hydrogen atoms) and electron acceptors (hydroxy groups). From a subset of stable dopants, Pd-doped α-MnO₂ is identified as the best catalyst and the only material that can outperform pristine α-MnO₂ . Different approaches to increase the bulk electron conductivity of semiconducting α-MnO₂ are discussed.

A facile and surfactant-free route for nanomanufacturing of tailored ternary nanoalloys as superior oxygen reduction reaction electrocatalysts

Laser ablation synthesis in solution-galvanic replacement reaction (LASiS-GRR) enables tuning of elemental ratios and bonding properties for Pt based ternary nanoalloys as ORR electrocatalysts.

Decoupling strain and ligand effects in ternary nanoparticles for improved ORR electrocatalysis

Ternary Pt–Au–M (M = 3d transition metal) nanoparticles show reduced OH adsorption energies and improved activity for the oxygen reduction reaction (ORR) compared to pure Pt nanoparticles, as obtained by density functional theory.

Effect of Sb Segregation on Conductance and Catalytic Activity at Pt/Sb-Doped SnO2 Interface: A Synergetic Computational and Experimental Study

Antimony-doped tin dioxide (ATO) is considered a promising support material for Pt-based fuel cell cathodes, displaying enhanced stability over carbon-based supports. In this work, the effect of Sb segregation on the conductance and catalytic activity at Pt/ATO interface was investigated through a combined computational and experimental study. It was found that Sb-dopant atoms prefer to segregate toward the ATO/Pt interface. The deposited Pt catalysts, interestingly, not only promote Sb segregation, but also suppress the occurrence of Sb(3+) species, a charge carrier neutralizer at the interface. The conductivity of ATO was found to increase, to a magnitude close to that of activated carbon, with an increment of Sb concentration before reaching a saturation point around 10%, and then decrease, indicating that Sb enrichment at the ATO surface may not always favor an increment of the electric current. In addition, the calculation results show that the presence of Sb dopants in ATO has little effect on the catalytic activity of deposited three-layer Pt toward the oxygen reduction reaction, although subsequent alloying of Pt and Sb could lower the corresponding catalytic activity. These findings help to support future applications of ATO/Pt-based materials as possible cathodes for proton exchange membrane fuel cell applications with enhanced durability under practical applications.