Transparent Colloids of Detonation Nanodiamond: Physical, Chemical and Biological Properties

Aqueous suspensions (colloids) containing detonation nano-diamond (DND) feature in most applications of DND and are an indispensable stage of its production; therefore, the interaction of DND with water is actively studied. However, insufficient attention has been paid to the unique physico-chemical and biological properties of transparent colloids with low DND content (≤0.1%), which are the subject of this review. Thus, such colloids possess giant dielectric permittivity which shows peculiar temperature dependence, as well as quasi-periodic fluctuations during slow evaporation or dilution. In these colloids, DND interacts with water and air to form cottonwool-like fibers comprising living micro-organisms (fungi and bacteria) and DND particles, with elevated nitrogen content due to fixation of atmospheric N2. Prolonged contact between these solutions and air lead to the formation of ammonium nitrate, sometimes forming macroscopic crystals. The latter was also formed during prolonged oxidation of fungi in aqueous DND colloids. The possible mechanism of N2 fixation is discussed, which can be attributable to the high reactivity of DND.

Estimation of Nanoparticle's Surface Electrostatic Potential in Solution Using Acid-Base Molecular Probes I: In Silico Implementation for Surfactant Micelles

Surface electrostatic potential Ψ is a key characteristic of colloid particles. Since the surface of the particles adsorbs various compounds and facilitates chemical reactions between them, Ψ largely affects the properties of adsorbed reactants and governs the flow of chemical reactions occurring between them. One of the most popular methods for estimating Ψ in hydrophilic colloids, such as micellar surfactant solutions and related systems, is the application of molecular probes, predominantly acid-base indicator dyes. The Ψ value is calculated from the difference of the probe's indices of the apparent acidity constant between the examined colloid solution and, usually, some other colloid solution with noncharged particles. Here, we show how to implement this method in silico using alchemical free energy calculations within the framework of molecular dynamics simulations. The proposed implementation is tested on surfactant micelles and is shown to predict experimental Ψ values with quantitative accuracy depending on the kind of surfactant. The sources of errors in the method are discussed, and recommendations for its application are given.

Early stages of polycrystalline diamond deposition: laser reflectance at substrates with growing nanodiamonds

The chemical vapor deposition of polycrystalline diamond (PCD) films is typically done on substrates seeded with diamond nanoparticles. Specular laser reflectance has been used in tandem with a continuous film model to monitor the thickness of these films during their deposition. However, approaches to gain information on properties that strongly affect film morphology, such as the areal density of seeds, remain largely unexplored. This work outlines a strategy for using laser reflectance measurements to refine the monitoring of film thickness during deposition, estimate the mean equivalent radii and the areal density of seeds, and estimate growth incubation periods. We present a general model based on the Rayleigh theory of scattering for laser reflectance at substrates with growing nanoparticles that captures the early stages of PCD deposition. We test our model experimentally by depositing diamond under identical conditions on silicon substrates with various seed densities and by comparing seed densities obtained by scanning electron microscopy to those determined by our strategy. We also explore the different deposition stages for which our model and a continuous film model can be used safely. In addition to providing guidelines for characterizing PCD deposition, this work may also advance the general understanding of nanoparticle growth and formation.

Steric Interaction of Polyglycerol-Functionalized Detonation Nanodiamonds

Detonation nanodiamonds have found numerous potential applications in a diverse array of fields such as biomedical imaging and drug delivery. Here, we systematically characterized non-functionalized and polyglycerol-functionalized detonation nanodiamond particles (DNPs) dispersed in aqueous suspensions at different ionic strengths (∼1.0 × 10^-7 to 1.0 × 10^-2 M) via dynamic light scattering and cryogenic transmission electron microscopy. For these colloidal suspensions, the total potential energies of interactions between a pair of DNPs were theoretically calculated using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory plus the fitting of the Boltzmann distribution to the interparticle spacing distribution of the colloidal DNPs. These investigations revealed that the non-functionalized DNPs are dispersed in aqueous media through the long-range (>10 nm) and weak (<7 k_BT) electrical double-layer repulsive interaction, while the driving force on dispersion of polyglycerol-functionalized DNPs is mostly derived from the short-range (<2 nm) and strong (∼55 k_BT) steric repulsive potential barrier generated by the polyglycerol. Moreover, our results show that the truly monodispersed and individually dispersed DNP colloids, forming no aggregates in aqueous suspensions, are available by both functionalizing DNPs by polyglycerol and increasing ionic strength of suspending media to ≳1.0 × 10^-2 M.

Sub-4 nm Nanodiamonds from Graphene-Oxide and Nitrated Polycyclic Aromatic Hydrocarbons at 423 K

Nanodiamonds are interesting materials from the point of view of their biocompatibility and their chemical, spectroscopic, and mechanical properties. Current synthetic methods for nanodiamonds involve harsh environments, which are potentially hazardous in addition to being expensive. We report a low-temperature (423 K) hydrothermal approach to form nanodiamonds by using graphene-oxide or nitrated polycyclic aromatic hydrocarbons (naphthalene, anthracene, phenanthrene, or pyrene) as a starting material. The reaction products contain single-crystalline or twinned nanodiamonds with average diameters in the 2-3 nm range. Theoretical calculations prove that, at the nanoscale, sub-4 nm nanodiamonds may adopt a structure that is more stable than graphene-oxide and nitrated polycyclic aromatic hydrocarbons. Our findings show that sp² carbon in the polycyclic aromatic precursor can be converted to sp³ carbon under unexpectedly moderate temperature conditions by using nanoscale precursors and thus offer a low-temperature approach for the synthesis of sub-4 nm nanodiamonds.

The effect of salt and particle concentration on the dynamic self-assembly of detonation nanodiamonds in water

Detonation nanodiamonds (DNDs) are becoming increasingly important in science and technology with applications from drug delivery to tribology. DNDs are known to self-assemble into fractal-like aggregates in water, but their colloidal properties remain poorly understood. Here, the effect of salt and particle concentration on the size and shape of these aggregates is investigated using dynamic light scattering and small-angle X-ray scattering. Our results suggest the existence of two particle aggregate populations with diameters on the scale of 50 nm and 300 nm, respectively. The concentration of NaCl, in the range 0.005-1 mM, does not have a significant effect on the size or shape of the particle aggregates. The hydrodynamic radius of both aggregate populations decreases as the DND concentration increases from 0.01 to 2 mg mL^-1. At the same time, the particle aggregates become denser and their overall shape changes from disk-like to rod-like with increasing DND concentration. We identify unexpected similarities between the aggregate structures observed for DNDs and those commonly observed for concentrated colloidal particles in high salt environments, described by classical colloid aggregation theories. Our results contribute to the fundamental understanding of the colloidal properties of DNDs and pave the way for the engineering of novel nanoparticle-based systems that make use of DNDs' unique colloidal properties for future applications.

Tritium labelling to study humic substance-nanodiamond composites

Nanodiamonds produced by the detonation method are used as lubricants, polishing compositions, polymer composites, etc. To reveal how nanodiamonds differ in terms of surface properties and interact with natural organic matter, we used tritium-labelled humic substances to quantitively describe their adsorption onto the nanodiamond surface. It was shown that the adsorption of humic substances onto nanodiamonds resulted in fractionation of humic substances that was strongly dependent on the zeta potential of nanodiamonds in water but did not significantly affect the uptake of nanodiamonds by wheat seedlings. The uptake of nanodiamond particles by plants was determined by the functional composition of the particle surface.

Structural changes in colloid solutions of nanodiamond

Segregation of particles in a nanodiamond aqueous colloid due to Stokes’ law leads to re-ordering of the lattice of particles.

Nanodiamond Coating Improves the Sensitivity and Antifouling Properties of Carbon Fiber Microelectrodes

Nanodiamonds (NDs) are carbon nanomaterials with a core diamond crystalline structure and crystal defects, such as graphitic carbon and heteroatoms, on their surface. For electrochemistry, NDs are promising to increase active sites and decrease fouling, but NDs have not been studied for neurotransmitter electrochemistry. Here, we optimized ND coatings on microelectrodes and found that ND increases the sensitivity for neurotransmitters with fast-scan cyclic voltammetry detection and decreases electrochemical and biofouling. Different sizes and functionalizations of NDs were tested, and ND suspensions were drop-casted onto carbon-fiber microelectrodes (CFMEs). The 5 nm ND-H and 5 nm ND-COOH formed thick coatings, while the 15 and 60 nm ND-COOH formed more sparse coatings. With electrochemical impedance spectroscopy, 5 nm ND-H and 5 nm ND-COOH had high charge-transfer resistance, while 15 and 60 nm ND-COOH had low charge-transfer resistance. ND-COOH (15 nm) was optimal, with the best electrocatalytic properties and current for dopamine. Sensitivity was enhanced 2.1 ± 0.2 times and the limit of detection for dopamine improved to 3 ± 1 nM. ND coating increased current for other cations such as serotonin, norepinephrine, and epinephrine, but not for the anion ascorbic acid. Moreover, NDs decreased electrochemical fouling from serotonin and 5-hydroxyindoleacetic acid, and they also decreased biofouling in brain slice tissue by 50%. The current at biofouled ND-coated electrodes is similar to the signal of pristine, unfouled CFMEs. The carboxylated ND-modified CFMEs are beneficial for neurotransmitter detection because of easy fabrication, improved limit of detection, and antifouling properties.

Colloids of detonation nanodiamond particles for advanced applications

Nanodiamond (ND) is one of the most attractive allotropic modification of carbon due to their unique physical and chemical properties. In the present review the current state of science and technology in the field of NDs is analyzed. ND can be used in various application and in different form e.g. as a dispersion phase in suspension, as a filler in composites, etc., so the sedimentation stability of ND in different media are under scrutiny. Thus, theoretical aspects of ND suspension coagulation mechanisms and the methods avoiding it were considered. The dependence of rheological behavior on particles modification was discussed as well. Various methods for the preparation and modification of NDs to obtain particles of various sizes on a nanometer scale with different physicochemical properties were reviewed. The area of practical application for NDs was considered on the example of polymer composites. The various manufacturing methods, mechanical properties and medical aspects for thermosetting, thermoplastic and elastomer ND composites were summarized.

Interaction of Polymethine Dyes with Detonation Nanodiamonds

Among cationic, anionic, and merocyanine polymethine dyes, the binding to detonation nanodiamond (DND) colloid particles in hydrosol occurs only for negatively charged dye species. This, in view of the positive ζ-potential of the DND used in this study, suggests the predominance of electrostatic interactions over other intermolecular forces in such systems. Indeed, after decorating the merocyanine and the cationic dye by one and two negatively charged sulfopropyl groups, respectively, so that the net charge of their colored species becomes negative, the compounds also demonstrate affinity to the DND particles. In all cases, the binding of dyes to DND is accompanied by a decrease in fluorescence intensity and a bathochromic shift of their absorption and fluorescence bands. A quantitative study of the dyes adsorption on the DND nanoparticles as performed using the Küster-Freundlich and Langmuir equations reveals some peculiarities of their attaching to the DND aggregates and allows estimating the specific area of the DND particles at a concentration of 0.0212 wt/vol %.

Nanodiamonds: Minuscule gems that ferry antineoplastic drugs to resistant tumors

Remarkable efforts are currently devoted to the area of nanodiamonds (NDs) research due to their superior properties viz: biocompatibility, minute size, inert core, and tunable surface chemistry. The use of NDs for the delivery of anticancer drugs has been at the forefront of NDs applications owing to their ability to increase chemosensitivity, sustain drug release, and minimize drug side effects. Accelerated steps towards the move of NDs from bench side to bedside have been recently witnessed. In this review, the effects of NDs production and purification techniques on NDs' final properties are discussed. Special concern is given to studies focusing on NDs use for anticancer drug delivery, stability enhancement and mediated targeted delivery. The aim of this review is to put the results of studies oriented towards NDs-mediated anticancer drug delivery side by side such that the reader can assess the potential use of NDs in clinics and follow up the upcoming results of clinical testing of NDs on animals and humans.

Fixation of atmospheric nitrogen by nanodiamonds

Very dilute aqueous colloids of a detonation-produced nanodiamond or an ultrafine synthetic diamond react with N₂ to yield solids containing fixed nitrogen.

High-yield fabrication and properties of 1.4 nm nanodiamonds with narrow size distribution

Detonation nanodiamonds (DNDs) with a typical size of 5 nm have attracted broad interest in science and technology. Further size reduction of DNDs would bring these nanoparticles to the molecular-size level and open new prospects for research and applications in various fields, ranging from quantum physics to biomedicine. Here we show a controllable size reduction of the DND mean size down to 1.4 nm without significant particle loss and with additional disintegration of DND core agglutinates by air annealing, leading to a significantly narrowed size distribution (±0.7 nm). This process is scalable to large quantities. Such molecular-sized DNDs keep their diamond structure and characteristic DND features as shown by Raman spectroscopy, infrared spectroscopy, STEM and EELS. The size of 1 nm is identified as a limit, below which the DNDs become amorphous.

Salt-Assisted Ultrasonic Deaggregation of Nanodiamond

We report a new facile, inexpensive, and contaminant-free technique of salt-assisted ultrasonic deaggregation (SAUD) of nanodiamond into single-digit particles stable in aqueous colloidal solution in a wide pH range. The technique utilizes the energy of ultrasound to break apart nanodiamond aggregates in sodium chloride aqueous slurry. In contrast to current deaggregation techniques, which introduce zirconia contaminants into nanodiamond, the single-digit nanodiamond colloids produced by SAUD have no toxic or difficult-to-remove impurities and are therefore well-suited to produce nanodiamonds for numerous applications, including theranostics, composites, and lubrication, etc. Requiring only aqueous slurry of sodium chloride and standard horn sonicator, and yielding highly pure well-dispersed nanodiamond colloids, the technique is an attractive alternative to current nanodiamond deaggregation protocols and can be easily implemented in any laboratory or scaled up for industrial use.