Plasmon-driven substitution of 4-mercaptophenylboronic acid to 4-nitrothiophenol monitored by surface-enhanced Raman spectroscopy

Plasmon-driven reactions on plasmonic nanoparticles (NPs) occur under significantly different conditions from those of classical organic synthesis and provide a promising pathway for enhancing the efficiency of various chemical processes. However, these reactions can also have undesirable effects, such as 4-mercaptophenylboronic acid (MPBA) deboronation. MPBA chemisorbs well to Ag NPs through its thiol group and can subsequently bind to diols, enabling the detection of various biological structures by surface-enhanced Raman scattering (SERS), but not upon its deboronation. To avoid this reaction, we investigated the experimental conditions of MPBA deboronation on Ag NPs by SERS. Our results showed that the level of deboronation strongly depends on both the morphology of the system and the excitation laser wavelength and power. In addition, we detected not only the expected products, namely thiophenol and biphenyl-4,4-dithiol, but also 4-nitrothiophenol (NTP). The crucial reagent for NTP formation was an oxidation product of hydroxylamine hydrochloride, the reduction agent used in Ag NP synthesis. Ultimately, this reaction was replicated by adding NaNO2 to the system, and its progress was monitored as a function of the laser power, thereby identifying a new reaction of plasmon-driven -B(OH)2 substitution for -NO2.

On-Chip Capture, Raman-Silent Polymer Labeling, and Digital Mapping Analysis of Escherichia coli O157:H7 in Beverages All-in-One

Escherichia coli O157:H7 is one of the most susceptible foodborne pathogens, easily causing food poisoning and other health risks. It is of great significance to establish a quantitative method with higher sensitivity and less time consumption for foodborne pathogens analysis. The Raman-silent signal has a good performance for avoiding interference from the food matrix so as to achieve accurate signal differentiation. In this work, we presented a preparation-mapping all-in-one method for digital mapping analysis. We prepared a functionalized Raman-silent polymer label of Escherichia coli O157:H7, which was captured on a porous 4-mercaptophenylboric acid@Ag foam chip. To improve accuracy and widen the detection range, a digital mapping quantitative strategy was employed in data extraction and processing. By transfer mapping information into digitized statistical results, the limitation of obtaining reproducible intensity values just by randomly selected spots on the substrate can be addressed. With a wide linear range of 1.0 × 101-1.0 × 105 CFU mL-1 and a limit of detection of 4.4 CFU mL-1, this all-in-one method had good sensitivity performance. Also, this method achieved good precision and selectivity in a series of experiments and was successfully applied to the analysis of beverage samples.

Phenylboronic acid modification-based novel dumbbell-shaped Au-Ag nanorod SERS substrates for ultrasensitive detection of SO42

Based on the coordination principle of Lewis acids, a 4-mercaptophenylboronic acid (4-MPBA)-modified novel dumbbell-shaped Au-Ag nanorod (4-MPBA@DS Au-AgNR) substrate was developed, which could be combined with the surface-enhanced Raman scattering (SERS) technique to detect SO42- with high sensitivity and specificity. DS Au-AgNRs synthesized in this study with a dumbbell-shaped structure were verified by finite-difference time domain (FDTD) simulation to be capable of stimulating strong localized electromagnetic enhancement (EM) at nano-edge and gap, generating a large number of "hot spots" exhibiting excellent SERS performance. The 4-MPBA modified on its surface could specifically recognize SO42-, producing a change in the spectral peak at 1382 cm-1, thus realizing highly sensitive and specific sensing of SO42-. Under optimized conditions, this SERS sensor responded rapidly to SO42- within 2 minutes and demonstrated outstanding specificity. Calculation of the ratio of the characteristic peaks at 1382 and 1070 cm-1 (I1382/I1070) enabled the quantitative detection of SO42- in the range of 1 × 10-8-1 × 10-3 M, and the detection threshold was as low as 1 nM, which was superior to those of similar detection methods. Importantly, the utility and reliability of this SERS substrate for the determination of SO42- in actual samples were evaluated using ion chromatography as the gold standard, and there was no significant difference between the two protocols (P > 0.05), and the RSD was less than 6% with a satisfactory recovery rate (97.6-102.3%). Therefore, the present protocol has the advantages of simplicity and rapidity, high sensitivity, specificity, stability, and practicability in the determination of SO42- in aqueous solution, providing a reliable solution for tracing SO42- in the fields of food safety and environmental testing.

Dual-Probe SERS Nanosensor: A Promising Approach for Sensitive and Ratiometric Detection of Glucose in Clinical Settings

Diabetes is a major global health concern, with millions of annual deaths. Monitoring glucose levels is vital for clinical management, and urine samples offer a noninvasive alternative to blood samples. Optical techniques for urine glucose sensing have gained notable traction due to their cost-effectiveness and portability. Among these methods, surface-enhanced Raman spectroscopy (SERS) has attracted considerable attention thanks to its remarkable sensitivity and multiplexing capabilities. However, challenges remain in achieving reliable quantification through SERS. In this study, an alternative approach is proposed to enhance quantification involving the use of dual probes. Each probe is encoded with unique SERS signatures strategically positioned in the biologically silent region. One probe indicates the glucose presence, while the other acts as an internal reference for calibration. This setup enables ratiometric analysis of the SERS signal, directly correlating it with the glucose concentration. The fabrication of the sensor relies on the prefunctionalization of Fe sheets using an aryl diazonium salt bearing a -C≡CH group (internal reference), followed by the immobilization of Ag nanoparticles modified with an aryl diazonium salt bearing a -B(OH)2 group (for glucose capture). A secondary probe bearing a -B(OH)2 group on one side and a -C≡N group on the other side enables the ratiometric analysis by forming a sandwich-like structure in the presence of glucose (glucose indicator). Validation studies in aqueous solutions and artificial urine demonstrated the high spectral stability and the potential of this dual-probe nanosensor for sensitive glucose monitoring in clinical settings.

Forward-predictive SERS-based chemical taxonomy for untargeted structural elucidation of epimeric cerebrosides

Achieving untargeted chemical identification, isomeric differentiation, and quantification is critical to most scientific and technological problems but remains challenging. Here, we demonstrate an integrated SERS-based chemical taxonomy machine learning framework for untargeted structural elucidation of 11 epimeric cerebrosides, attaining >90% accuracy and robust single epimer and multiplex quantification with <10% errors. First, we utilize 4-mercaptophenylboronic acid to selectively capture the epimers at molecular sites of isomerism to form epimer-specific SERS fingerprints. Corroborating with in-silico experiments, we establish five spectral features, each corresponding to a structural characteristic: (1) presence/absence of epimers, (2) monosaccharide/cerebroside, (3) saturated/unsaturated cerebroside, (4) glucosyl/galactosyl, and (5) GlcCer or GalCer's carbon chain lengths. Leveraging these insights, we create a fully generalizable framework to identify and quantify cerebrosides at concentrations between 10-4 to 10-10 M and achieve multiplex quantification of binary mixtures containing biomarkers GlcCer24:1, and GalCer24:1 using their untrained spectra in the models.

SERS-Active Printable Hydrogel for 3D Cell Culture and Imaging

Hydrogel-based three-dimensional (3D) cell culture systems mimic the salient elements of extracellular matrices and promote native cell function. However, high-resolution 3D cell imaging that can provide biological information about multiple features of individual cells is yet to be realized. In this context, we incorporated plasmonic gold nanoparticles (AuNPs) into an alginate/gelatin hydrogel to produce surface-enhanced Raman spectroscopy (SERS)-active hydrogel inks for the 3D printing and culturing of Vero cells. Dense incorporation of AuNPs enables production of a printed 3D grid structure with 3D SERS performance, but with no measurable adverse effects on cell growth. Label-free SERS spectra were collected within a hydrogel, and a random forest binary classifier was developed to discriminate Vero cell signals from the hydrogel background with an accuracy of 87.5%. The results suggest that SERS signals from cellular components, such as proteins, lipids, and carbohydrates, account for this discrimination. We demonstrate visualization of cell shape, location, and density by combining predicted binary maps with peak feature intensity maps in 2D and 3D. SERS images with a resolution of ≈3 μm match well with the microscopy images and show clear increases in intensity with incubation time. We suggest that 3D SERS cell imaging is a promising means to examine the effect of external cell stimuli on cellular behavior for diagnostic purposes.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

Chemical conjugation to differentiate monosaccharides by Raman and surface enhanced Raman spectroscopy

Sugars play important roles in numerous biological processes, from providing energy to modifying proteins to alter their function. Glycosylation, the attachment of a sugar residue to a protein, is the most common post translational modification. Identifying the glycans on a protein is a useful tool both for pharmaceutical development as well as probing the proteome and glycome further. Sugars, however, are difficult analytes to probe due to their isomeric nature. In this work, Raman spectroscopy and surface enhanced Raman spectroscopy (SERS) are used to identify different monosaccharide species based on the vibrational modes of these isomeric analytes. The weak scattering of the sugars was overcome through conjugation with phenylboronic acid to provide a larger Raman scattering cross section and induce slight changes in the observed spectra associated with the structure of the monosaccharides. Spontaneous Raman, SERS in flow, and static SERS detection were performed in order to discriminate between arabinose, fructose, galactose, glucose, mannose, and ribose, as well as provide a method for identification and quantification for these sugar conjugates.

Quantitative detection of dopamine in human serum with surface-enhanced Raman scattering (SERS) of constrained vibrational mode

Dopamine (DA) is a crucial neurotransmitter involved in the hormonal, nervous, and vascular systems being considered as an index to diagnose neurodegenerative diseases, including Parkinson's and Alzheimer's disease. Herein, we demonstrate the quantitative sensing of DA using the peak shift in surface-enhanced Raman scattering (SERS) of 4-mercaptophenylboronic acid (4-MPBA), resulting from the concentration of DA. To enable the signal enhancement of Raman scattering, Ag nanostructure was built with one-step gas-flow sputtering. 4-MPBA was then introduced using vapor-based deposition, acting as a reporter molecule for bonding with DA. The gradual peak-shift from 1075.6 cm^-1 to 1084.7 cm^-1 was observed with the increasing concentration of DA from 1 pM to 100nM. The numerical simulation revealed that DA bonding induced a constrained vibrational mode corresponding to 1084.7 cm^-1 instead of a C-S-coupled C-ring in-plane bending mode of 4-MPBA corresponding to 1075.6 cm^-1. Proposed SERS sensors depicted reliable DA detection in human serum and good selectivity against other analytes, including glucose, creatinine, and uric acid.

Non-enzymatic detection of glucose levels in human blood plasma by a graphene oxide-modified organic transistor sensor

We herein report an organic transistor functionalized with a phenylboronic acid derivative and graphene oxide for the quantification of plasma glucose levels, which has been achieved by the minimization of interferent effects derived from physical protein adsorption on the detection electrode.

A Schematic Colorimetric Assay for Sialic Acid Assay Based on PEG-Mediated Interparticle Crosslinking Aggregation of Gold Nanoparticles

Sialic acid (SA) is a well-known component of glycoproteins, which have applications in various functional processes on the cell's surface. The colorimetric is a simpler and more convenient method for measuring SA due to its low-cost apparatus and visual signal changes. This work focused on the unpredictable interparticle crosslinking aggregation of the functionalized gold nanoparticles (AuNPs) in complex media. We proposed a balance of the Derjaguin-Landau-Verwey-Overbeek (DLVO)-type aggregation and molecule-based interaction method to solve this problem. Here, we report a novel colorimetric assay for the determination of SA using 4-mercaptophenyl boronic acid (4-MPBA) as an analyte's recognition molecule, and negative charge PEG₄₀₀ was used to repulsive the interparticle crosslinking. The proposed sensing platform shows a linear relationship between the ratio of the absorbance intensity (A₅₂₅/A₆₆₀) and concentration of SA from 0.05 to 8 mM (R² = 0.997) and a detection limit of 48 μM was observed. The novel gold-based colorimetric sensor is easy to fabricate, reproducible in its test performance and has been successfully applied for the detection of SA in biological and healthcare product samples.

Balanced Coexistence of Reversible and Irreversible Covalent Bonds in a Conductive Triple Polymeric Network Enables Stretchable Hydrogels with High Toughness and Adhesiveness

The application of soft hydrogels to stretchable devices has attracted increasing attention in deformable bioelectronics owing to their unique characteristic, "modulus matching between materials and organs". Despite considerable progress, their low toughness, low conductivity, and absence of tissue adhesiveness remain substantial challenges associated with unstable skin-interfacing, where body movements undesirably disturb electrical signal acquisitions. Herein, we report a material design of a highly tough strain-dissipative and skin-adhesive conducting hydrogel fabricated through a facile one-step sol-gel transition and its application to an interactive human-machine interface. The hydrogel comprises a triple polymeric network where irreversible amide linkage of polyacrylamide with alginate and dynamic covalent bonds entailing conjugated polymer chains of poly(3,4-ethylenedioxythiophene)-co-(3-thienylboronic acid) are simultaneously capable of high stretchability (1300% strain), efficient strain dissipation (36,209 J/m²), low electrical resistance (590 Ω), and even robust skin adhesiveness (35.0 ± 5.6 kPa). Based on such decent characteristics, the hydrogel was utilized as a multifunctional layer for successfully performing either electrophysiological cardiac/muscular on-skin sensors or an interactive stretchable human-machine interface.

Is Raman the best strategy towards the development of non-invasive continuous glucose monitoring devices for diabetes management?

Diabetes has no well-established cure; thus, its management is critical for avoiding severe health complications involving multiple organs. This requires frequent glycaemia monitoring, and the gold standards for this are fingerstick tests. During the last decades, several blood-withdrawal-free platforms have been being studied to replace this test and to improve significantly the quality of life of people with diabetes (PWD). Devices estimating glycaemia level targeting blood or biofluids such as tears, saliva, breath and sweat, are gaining attention; however, most are not reliable, user-friendly and/or cheap. Given the complexity of the topic and the rise of diabetes, a careful analysis is essential to track scientific and industrial progresses in developing diabetes management systems. Here, we summarize the emerging blood glucose level (BGL) measurement methods and report some examples of devices which have been under development in the last decades, discussing the reasons for them not reaching the market or not being really non-invasive and continuous. After discussing more in depth the history of Raman spectroscopy-based researches and devices for BGL measurements, we will examine if this technique could have the potential for the development of a user-friendly, miniaturized, non-invasive and continuous blood glucose-monitoring device, which can operate reliably, without inter-patient variability, over sustained periods.

Glucose detection through surface-enhanced Raman spectroscopy: A review

Glucose detection is of vital importance to diabetes diagnosis and treatment. Optical approaches in glucose sensing have received much attention in recent years due to the relatively low cost, portable, and mini-invasive or non-invasive potentials. Surface enhanced Raman spectroscopy (SERS) endows the benefits of extremely high sensitivity because of enhanced signals and specificity due to the fingerprint of molecules of interest. However, the direct detection of glucose through SERS was challenging because of poor adsorption of glucose on bare metals and low cross section of glucose. In order to address these challenges, several approaches were proposed and utilized for glucose detection through SERS. This review article mainly focuses on the development of surface enhanced Raman scattering based glucose sensors in recent 10 years. The sensing mechanisms, rational design and sensing properties to glucose are reviewed. Two strategies are summarized as intrinsic sensing and extrinsic sensing. Four general categories for glucose sensing through SERS are discussed including SERS active platform, partition layer functionalized surface, boronic acid based sensors, and enzymatic reaction based biosensors. Finally, the challenges and outlook for SERS based glucose sensors are also presented.

Determination of the Influence of Various Factors on the Character of Surface Functionalization of Copper(I) and Copper(II) Oxide Nanosensors with Phenylboronic Acid Derivatives

In this work, we attempt to determine the influence of the oxidation state of copper [Cu(I) vs Cu(II)], the nature of the interface (solid/aqueous vs solid/air), the incubation time, and the structure of N-substituted phenylboronic acids (PBAs) functionalizing the surface of copper oxide nanostructures (NSs) on the mode of adsorption. For this purpose, 4-[(N-anilino)(phosphono)-S-methyl]phenylboronic acid (1-PBA) and its two analogues (2-PBA and bis{1-PBA}) and the copper oxide NSs were synthesized in a surfactant-/ion-free solution via a synthetic route that allows controlling the size and morphology of NSs. The NSs were characterized by scanning electron microscopy, ultraviolet-visible spectroscopy, Raman spectroscopy, and X-ray diffraction, which confirmed the formation of spherical Cu2O nanoparticles (Cu2ONPs) with a size of 1.5 μm to 600 nm crystallized in a cubic cuprite structure and leaf-like CuO nanostructures (CuONSs) with dimensions of 80-180 nm in width and 400-700 nm in length and crystallized in a monoclinic structure. PBA analogues were deposited on the surface of the copper oxide NSs, and adsorption was investigated using surface-enhanced Raman spectroscopy (SERS). The changes in the orientation of the molecule relative to the substrate surface caused by the abovementioned factors were described, and the signal enhancement on the copper oxide NSs was determined. This is the first study using vibrational spectroscopy for these compounds.

Glucose Detection of 4-Mercaptophenylboronic Acid-Immobilized Gold-Silver Core-Shell Assembled Silica Nanostructure by Surface Enhanced Raman Scattering

The importance of glucose in many biological processes continues to garner increasing research interest in the design and development of efficient biotechnology for the sensitive and selective monitoring of glucose. Here we report on a surface-enhanced Raman scattering (SERS) detection of 4-mercaptophenyl boronic acid (4-MPBA)-immobilized gold-silver core-shell assembled silica nanostructure (SiO₂@Au@Ag@4-MPBA) for quantitative, selective detection of glucose in physiologically relevant concentration. This work confirmed that 4-MPBA converted to 4-mercaptophenol (4-MPhOH) in the presence of H₂O₂. In addition, a calibration curve for H₂O₂ detection of 0.3 µg/mL was successfully detected in the range of 1.0 to 1000 µg/mL. Moreover, the SiO₂@Au@Ag@4-MPBA for glucose detection was developed in the presence of glucose oxidase (GOx) at the optimized condition of 100 µg/mL GOx with 1-h incubation time using 20 µg/mL SiO₂@Au@Ag@4-MPBA and measuring Raman signal at 67 µg/mL SiO₂@Au@Ag. At the optimized condition, the calibration curve in the range of 0.5 to 8.0 mM was successfully developed with an LOD of 0.15 mM. Based on those strategies, the SERS detection of glucose can be achieved in the physiologically relevant concentration range and opened a great promise to develop a SERS-based biosensor for a variety of biomedicine applications.

Plasma membrane anchored nanosensor for quantifying endogenous production of H2O2 in living cells

Hydrogen peroxide (H₂O₂) is one of the main second messengers involved in signaling pathways controlling cell metabolism. During tumorigenesis H₂O₂ is generated on the extracellular space by membrane-associated NADPH oxidases and superoxide dismutase to stimulate cell proliferation and preservation of the transformed state. Accordingly, a characteristic feature of malignant cells is overproduction of H₂O₂ in the extracellular milieu and the subsequent absorption in the cytosol. Since the most significant gradients of endogenous extracellular H₂O₂ can be observed only in a very shallow region of the fluid in contact with the plasma membrane, we show here the use of a newly designed nanosensor anchored to the outer cell surface and capable of quantifying H₂O₂ at nanometer distance from the membrane proteins responsible for its production. This biosensor is built upon gold nanoparticles functionalized with a H₂O₂-sensitive boronate compound that is probed using surface enhanced Raman spectroscopy (SERS). The highly localized information obtained on the cell surface by SERS analysis is combined with analytical methods of redox biology to estimate the associated levels of intracellular H₂O₂ responsible for cell signaling. The results obtained from A549 lung cancer cell line show localized spots on the cell surface at concentration up to 12 μM, associated to intracellular concentration up to 5.1 nM.

Ag-Nanowire Bundles with Gap Hot Spots Synthesized in Track-Etched Membranes as Effective SERS-Substrates

This paper presents a cost-effective approach for the template-assisted electrodeposition fabrication of substrates for surface-enhanced Raman scattering (SERS) with metal nanowires (NWs) grown in pores of polymer track-etched membranes (TM). This technique allows the synthesis of NWs array with its certain surface density and diameter (from dozen to hundreds of nm). NWs length also may be varied (order of μm) by controlling deposition time. Here we grow vertical Ag-NWs which are leaning towards their nearest neighbors, forming self-assembled bundles whose parameters depend on the NW aspect ratio (length to diameter). We show that in such bundles there are “hot spots” in the nm-gaps between NWs tips. Computer simulations have demonstrated a strong enhancement of the electric field within these hot spots; thus, the Raman signal is markedly amplified for analyte molecules placed directly inside the gaps. We have experimentally proved the potential of this SERS-technique on the example of 4-Mercaptophenylboronic acid (4-MPBA). For 4-MPBA the maximal enhancement of Raman signal was found at NWs length of ~1.6 μm and diameter of ~100 nm. The effect is higher (up to twice) if “wet” substrate is used just immediately after the TM polymer removal so that the tips are brought to lean after analyte exposure. We suggest this new type of nanostructured SERS-substrates as a base of effective sensing of extremely low concentration of analytes.

Au@Ag nanoparticle sensor for sensitive and rapid detection of glucose

A sensitive SERS sensor based on Au@Ag nanoparticles for rapid glucose detection (5 min) via tuning of the plasmonic properties.

The influence of 2-acrylamidephenylboronic acid on the phase behaviour of its copolymers with N-isopropylacrylamide in aqueous solution

In this study, we report the synthesis and phase behaviour of statistical p(N-isopropylacrylamide-co-2-acrylamidephenylboronic acid), P(NIPAM-co-2-AAPBA) copolymers.

Plasmon-driven protodeboronation reactions in nanogaps

Boronic acids are the key compounds in Suzuki coupling reactions and in the detection of monosaccharides. The C-B bond cleavage deboronation is an important side reaction that lowers the Suzuki coupling reaction yield and even disables saccharide detection. Here, we report that protodeboronation occurs for 4-mercaptophenylboronic acid (MPBA) within narrow nanogaps between gold nanoparticles (AuNPs) and planar gold substrates. The irradiation of such nanoparticle-on-mirror (NPoM) systems at 785 nm drives the protodeboronation reaction to form benzenethiol (BT). Wavelength-dependence experiments, combined with dark-field single-particle scattering spectroscopy, reveal that excitation of the bonding dipole plasmon mode of the NPoM leads to the best efficiency. Among the excited plasmon decay pathways, the generation of hot charge carriers induces the protodeboronation of MPBA. The possibility of plasmonic thermal reactions is ruled out because external heating of the substrates does not cause the reaction to take place. A comparison of the reaction yield under ambient, Ar, and oxygen gas conditions reveals that hot charge carriers directly transfer to MPBA, which subsequently produces BT, but the presence of oxygen promotes the reaction by opening another hot-electron transfer channel. The protodeboronation reaction of MPBA is an important addition to the catalog of plasmon-driven chemical reactions, not only because the reaction is relevant to organic and analytical chemistry but also because it deepens our understanding of the hot carrier dynamics at the interface between plasmonic nanoparticles and molecules.

Development of affinity between target analytes and substrates in surface enhanced Raman spectroscopy for environmental pollutant detection

Environmental pollution has long been a social concern due to the variety of pollutants and their wide distribution, persistence and being detrimental to health. It is therefore necessary to develop rapid and sensitive strategies to trace and detect these compounds. Among various detection methodologies, surface enhanced Raman spectroscopy (SERS) has become an attractive option as it enables accurate analyte identification, simple sample preparation, rapid detection and ultra-high sensitivity without any interference from water. For SERS detection, an essential yet challenging step is the effective capture of target analytes onto the surface of metal nanostructures with a high intensity of enhanced electromagnetic field. This review has systematically summarized recent advances in developing affinity between targets and the surface of SERS substrates via direct adsorption, hydrophobic functional groups, boronate affinity, metal organic frameworks (MOFs), DNA aptamers and molecularly imprinted polymers (MIPs). At the end of this review, technical limitations and outlook have been provided, with suggestions on optimizing SERS techniques for real-world applications in environmental pollutant detection.

On the Effect of Modified Carbohydrates on the Size and Shape of Gold and Silver Nanostructures

Gold (Au) and silver (Ag) nanostructures have widespread utilization from biomedicine to materials science. Therefore, their synthesis with control of their morphology and surface chemistry have been among the hot topics over the last decades. Here, we introduce a new approach relying on sugar derivatives that work as reducing, stabilizing, and capping agents in the synthesis of Au and Ag nanostructures. These sugar derivatives are utilized alone and as mixture, resulting in spherical, spheroid, trigonal, polygonic, and star-like morphologies. The synthesis approach was further tested in the presence of acetate and dimethylamine as size- and shape-directing agents. With the use of transmission electron microscopy (TEM), selected area electron diffraction (SAED), x-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet-visible (UV-vis) absorption spectroscopy techniques, the particle size, shape, assembly, aggregation, and film formation characteristics were evaluated. NPs’ attributes were shown to be tunable by manipulating the sugar ligand selection and sugar ligand/metal-ion ratio. For instance, with an imine side group and changing the sugar moiety from cellobiose to lactose, the morphology of the Ag nanoparticles (NPs) transformed from well dispersed cubic to rough and aggregated. The introduction of acetate and dimethylamine further extended the growth pattern and morphological properties of these NPs. As examples, L5 AS, G5AS, and S5AS ligands formed spherical or sheet-like structures when used alone, which upon the use of these additives transformed into larger multicore and rough NPs, revealing their significant effect on the NP morphology. Selected samples were tested for their stability against protein corona formation and ionic strength, where a high chemical stability and resistance to protein coating were observed. The findings show a promising, benign approach for the synthesis of shape- and size-directed Au and Ag nanostructures, along with a selection of the chemistry of carbohydrate-derivatives that can open new windows for their applications.

Analytical techniques for the detection of glycated haemoglobin underlining the sensors

The increase in concentrations of blood glucose results arise in the proportion of glycated haemoglobin. Therefore, the percentage of glycated haemoglobin in the blood could function as a biomarker for the average glucose level over the past three months and can be used to detect diabetes. The study of glycated haemoglobin tends to be complex as there are about three hundred distinct assay techniques available for evaluating glycated haemoglobin which contributes to some differences in the recorded values from the similar samples. This review outlines distinct analytical methods that have evolved in the recent past for precise recognition of the glycated - proteins.

Multiplex Surface-Enhanced Raman Scattering Identification and Quantification of Urine Metabolites in Patient Samples within 30 min

Successful translation of laboratory-based surface-enhanced Raman scattering (SERS) platforms to clinical applications requires multiplex and ultratrace detection of small biomarker molecules from a complex biofluid. However, these biomarker molecules generally exhibit low Raman scattering cross sections and do not possess specific affinity to plasmonic nanoparticle surfaces, significantly increasing the challenge of detecting them at low concentrations. Herein, we demonstrate a "confine-and-capture" approach for multiplex detection of two families of urine metabolites correlated with miscarriage risks, 5β-pregnane-3α,20α-diol-3α-glucuronide and tetrahydrocortisone. To enhance SERS signals by 10¹²-fold, we use specific nanoscale surface chemistry for targeted metabolite capture from a complex urine matrix prior to confining them on a superhydrophobic SERS platform. We then apply chemometrics, including principal component analysis and partial least-squares regression, to convert molecular fingerprint information into quantifiable readouts. The whole screening procedure requires only 30 min, including urine pretreatment, sample drying on the SERS platform, SERS measurements, and chemometric analyses. These readouts correlate well with the pregnancy outcomes in a case-control study of 40 patients presenting threatened miscarriage symptoms.

Enzyme-Assist-Interference-Free Strategy for Raman Selective Determination of Sialic Acid

Abnormal physiological levels of sialic acid (SA) could be used to diagnosis cancer progression stages. In this work, we describe an enzyme-assist-interference-free strategy for Raman selective determination of SA in serum. First, we assemble gold nanoparticles (Au NPs) onto the indium tin oxide glass (ITO) to construct an ITO/Au two-dimension substrate. Through modification of 4-mercaptoboric acid (4-MPBA) onto the surface of ITO/Au, the SA response plate is prepared due to the reversible esterification bond. In this strategy, a sandwich structure is rationally designed as ITO/Au/4-MPBA/SA/4-MPBA/Au to enhance the Raman scattering. The Raman detection linear concentration of SA ranged from 2.5 × 10^-7 to 1.5 × 10^-6 M, and a limit of detection about 1.2 × 10^-7 M could be achieved. Considering the presence of glucose (Glu) in physiological fluid, we introduce glucose oxidase to remove the interference from Glu and realize the accurate determination of SA. The proposed novel Raman rapid method provides an ultrasensitive and interference-free protocol for the early diagnosis of cancer.

Reusable Silicon-Based SERS Chip for Ratiometric Analysis of Fluoride Ion in Aqueous Solutions

An innovative ratiometric surface-enhanced Raman scattering (SERS) sensor using a 4-mercaptoboric acid (4-MPBA)-modified silver nanoparticle-decorated silicon wafer (Si@Ag NPs chip) was proposed for the ultrasensitive determination of F^- ions in aqueous solutions. The principle of sensing strategy is based on fluoride-induced structural symmetry breaking and charge redistribution of phenylboronic acid, leading to a band shift of the C-C stretching mode of 4-MPBA from 1589 to 1576 cm^-1. Accordingly, a ratiometric signal of the area ratio (A₁₅₇₆/A₁₅₈₉) between the fluoride-bond MPBA molecules and unoccupied MPBA molecules can be used for the quantitative response of F^- ions. In comparison with other SERS-based sensing methods, this ratiometric method can avoid a large error resulting from the inhomogeneity of substrates. Under the optimized analytical conditions, the proposed SERS sensor possesses a quick response to F^- ions within 2 min and exhibits high selectivity for F^- ions with the determination limit of 10^-8 M, which is over 3 orders of magnitude lower than the World Health Organization (WHO) guideline value for F^- ions in drinking water. Of particular significance, the present sensor features favorable recyclability, which preserves suitable reproducibility during 6-time cyclic determination of F^- ions. The practical utility of this sensing system for the determination of F^- ions was tested with real water and toothpaste samples, and the results demonstrate that this sensor shows high recoveries (90-110%). Given its simple principle and easy operation, the present silicon-based SERS sensor could serve as a promising sensor for various practical applications.

High Stability Thiol-Coated Gold Nanostars Monolayers with Photo-Thermal Antibacterial Activity and Wettability Control

The adhesion and proliferation of bacteria on abiotic surfaces pose challenges in both health care and industrial applications. Gold nanostars (GNSs) monolayers grafted on glass have demonstrated to exert antibacterial action due to their photo-thermal features. Here, these GNS layers were further functionalized using thiols monolayers, in order to impart different wettability to the surfaces and thus adding a feature that could help to fight bacterial proliferation. Thiol that has different functional groups was used and the thiol-protected surfaces were characterized by means of UV-vis spectroscopy, contact angles, SEM and surface enhanced Raman spectroscopy (SERS). We verified that (i) coating with the proper thiol allows us to impart high hydrophilicity or hydrophobicity to the surfaces (with contact angle values ranging from 10 to 120°); (ii) GNS monolayers are strongly stabilized by functionalization with thiols, with shelf stability increasing from a few weeks to more than three months and (iii) photo-thermal features and subsequent antibacterial effects caused by hyperthermia are not changed by thiols layers, allowing us to kill at least 99.99% of representative bacterial strains.

Designing dendronic-Raman markers for sensitive detection using surface-enhanced Raman spectroscopy

Surface-Enhanced Raman Spectroscopy (SERS) is well-established as a tool for bio-diagnostics but is often limited by analyte sensitivity and the need for specialized substrates. Signal enhancement can be achieved by attaching multiple Raman markers to a single analyte. Dendronic frameworks with multiple Raman markers attached to the periphery offer an opportunity to examine this idea. In this article, dendrons with thiophenol groups on their periphery were synthesized and tested as a SERS analyte. For this study, simple gold nanoparticles (∼60 nm) were used as a substrate. A 102 fold enhancement in detection was observed upon going from a mono-thiophenol (MT) to a tetra-thiophenol (TT). Dendronic Raman markers increased the probability of SERS occurrence at lower concentrations when compared to a single Raman active molecule. This strategy extends the applicability of SERS, as these analyte molecules can be just mixed or drop-casted on any kind of SERS substrate.

Aggregation of Gold Nanoparticles Caused in Two Different Ways Involved in 4-Mercaptophenylboronic Acidand Hydrogen Peroxide

The difference in gold nanoparticle (AuNPs) aggregation caused by different mixing orders of AuNPs, 4-mercaptophenylboronic acid (4-MPBA), and hydrogen peroxide (H₂O₂) has been scarcely reported. We have found that the color change of a ((4-MPBA + AuNPs) + H₂O₂) mixture caused by H₂O₂ is more sensitive than that of a ((4-MPBA + H₂O₂) + AuNPs) mixture. For the former mixture, the color changes obviously with H₂O₂ concentrations in the range of 0~0.025%. However, for the latter mixture, the corresponding H₂O₂ concentration is in the range of 0~1.93%. The mechanisms on the color change originating from the aggregation of AuNPs occurring in the two mixtures were investigated in detail. For the ((4-MPBA + H₂O₂) + AuNPs) mixture, free 4-MPBA is oxidized by H₂O₂ to form bis(4-hydroxyphenyl) disulfide (BHPD) and peroxoboric acid. However, for the ((4-MPBA+AuNPs) + H₂O₂) mixture, immobilized 4-MPBA is oxidized by H₂O₂ to form 4-hydroxythiophenol (4-HTP) and boric acid. The decrease in charge on the surface of AuNPs caused by BHPD, which has alarger steric hindrance, is poorer than that caused by -4-HTP, and this is mainly responsible for the difference in the aggregation of AuNPs in the two mixtures. The formation of boric acid and peroxoboric acid in the reaction between 4-MPBA and H₂O₂ can alter the pH of the medium, and the effect of the pH change on the aggregation of AuNPs should not be ignored. These findings not only offer a new strategy in colorimetric assays to expand the detection range of hydrogen peroxide concentrations but also assist in deepening the understanding of the aggregation of citrate-capped AuNPs involved in 4-MPBA and H₂O₂, as well as in developing other probes.

Glucose Sensing Using Surface-Enhanced Raman-Mode Constraining

Diabetes mellitus is a chronic disease, and its management focuses on monitoring and lowering a patient's glucose level to prevent further complications. By tracking the glucose-induced shift in the surface-enhanced Raman-scattering (SERS) emission of mercaptophenylboronic acid (MPBA), we have demonstrated fast and continuous glucose sensing in the physiologically relevant range from 0.1 to 30 mM and verified the underlying mechanism using numerical simulations. Bonding of glucose to MPBA suppresses the "breathing" mode of MPBA at 1071 cm^-1 and energizes the constrained-bending mode at 1084 cm^-1, causing the dominant peak to shift from 1071 to 1084 cm^-1. MPBA-glucose bonding is also reversible, allowing continuous tracking of ambient glucose concentrations, and the MPBA-coated substrates showed very stable performance over a 30 day period, making the approach promising for long-term continuous glucose monitoring. Using Raman-mode-constrained, miniaturized SERS implants, we also successfully demonstrated intraocular glucose measurements in six ex vivo rabbit eyes within ±0.5 mM of readings obtained using a commercial glucose sensor.

A graphene aptasensor for biomarker detection in human serum

This paper presents an affinity graphene nanosensor for detection of biomarkers in undiluted and non-desalted human serum. The affinity nanosensor is a field-effect transistor in which graphene serves as the conducting channel. The graphene surface is sequentially functionalized with a nanolayer of the polymer polyethylene glycol (PEG) and a biomarker-specific aptamer. The aptamer is able to specifically bind with and capture unlabeled biomarkers in serum. A captured biomarker induces a change in the electric conductivity of the graphene, which is measured in a buffer of optimally chosen ionic strength to determine the biomarker concentration. The PEG layer effectively rejects nonspecific adsorption of background molecules in serum while still allowing the aptamer to be readily accessible to serum-borne biomarkers and increases the effective Debye screening length on the graphene surface. Thus, the aptamer-biomarker binding sensitively changes the graphene conductivity, thereby achieving specific and label-free detection of biomarkers with high sensitivity and without the need to dilute or desalt the serum. Experimental results demonstrate that the graphene nanosensor is capable of specifically capturing human immunoglobulin E (IgE), used as a representative biomarker, in human serum in the concentration range of 50 pM-250 nM, with a resolution of 14.5 pM and a limit of detection of 47 pM.

Conformational sensitivity of surface selection rules for quantitative Raman identification of small molecules in biofluids

Biofluid analysis by surface-enhanced Raman scattering (SERS) is usually hindered by nonspecific interferences. It is challenging to drive targeted molecules towards sensitive areas with specific capture and quantitative recognition in complex biofluids. Herein, a highly specific and quantitative SERS analyzer for small molecule dopamine (DA) in serum is demonstrated on a portable Raman device by virtue of a transducer of mercaptophenylboronic acid (MPBA) and a site-directed decoration of plasmonic Ag dendrites on a superhydrophobic surface. Theoretical simulations of molecular vibrations and charge distributions demonstrate the predomination of Raman surface selection rules in molecular reorientation upon the binding of DA. This recognition event is translated into ratiometric changes in the spectral profile which evidences excellent capability on SERS quantitation. The rules can well distinguish DA from its common interferents including fructose, glucose, sucrose and ascorbic acid which all generate weak but completely opposite spectral changes. Moreover, benefitting from the wettability difference, the target DA in diluted serum can be specifically enriched on a transducer-capped Ag surface, and the adsorption of other interferences is resisted by superhydrophobic features. It paves a new way for labelling a single SERS tag to simultaneously realize the identification and quantification of small molecules in complex biological media.

Plasmon-Triggered Hot-Spot Excitation on SERS Substrates for Bacterial Inactivation and in Situ Monitoring

Bacterial sensing and inactivating is one of the key steps to prevent bacterial propagation and transfer. Here, using Ag nanoparticle-grafted tungsten oxide films (WO₃/Ag), we developed a multifunctional platform that may act as a surface-enhanced Raman spectroscopy substrate for sensitively capturing and counting bacteria. Moreover, we demonstrated that the use of photon-triggered surface plasmon resonance of Ag on the WO₃ surface resulted in a significantly improved photocatalytic activity under visible light (638 nm). The photogenerated reactive oxygen species have been shown to be efficient in the inactivation of bacteria, and the bacteria inactivation process could be monitored in situ by Raman spectroscopy. On the basis of the obtained Raman results and fluorescence measurements of green fluorescence protein expressing bacteria, the active species triggered by hot spots was demonstrated to account for broken cell walls. The bacterial cell contents subsequently leaked out, leading to cell degradation. Potentially, our work may provide a promising strategy for capturing and monitoring the bactericidal process at low concentration and, specifically, may help in the investigation of related inactivation approaches and mechanisms.

Facing Challenges in Real-Life Application of Surface-Enhanced Raman Scattering: Design and Nanofabrication of Surface-Enhanced Raman Scattering Substrates for Rapid Field Test of Food Contaminants

Surface-enhanced Raman scattering (SERS) is capable of detecting a single molecule with high specificity and has become a promising technique for rapid chemical analysis of agricultural products and foods. With a deeper understanding of the SERS effect and advances in nanofabrication technology, SERS is now on the edge of going out of the laboratory and becoming a sophisticated analytical tool to fulfill various real-world tasks. This review focuses on the challenges that SERS has met in this progress, such as how to obtain a reliable SERS signal, improve the sensitivity and specificity in a complex sample matrix, develop simple and user-friendly practical sensing approach, reduce the running cost, etc. This review highlights the new thoughts on design and nanofabrication of SERS-active substrates for solving these challenges and introduces the recent advances of SERS applications in this area. We hope that our discussion will encourage more researches to address these challenges and eventually help to bring SERS technology out of the laboratory.

Different strategies for detection of HbA1c emphasizing on biosensors and point-of-care analyzers

Measurement of glycosylated hemoglobin (HbA1c) is a gold standard procedure for assessing long term glycemic control in individuals with diabetes mellitus as it gives the stable and reliable value of blood glucose levels for a period of 90-120 days. HbA1c is formed by the non-enzymatic glycation of terminal valine of hemoglobin. The analysis of HbA1c tends to be complicated because there are more than 300 different assay methods for measuring HbA1c which leads to variations in reported values from same samples. Therefore, standardization of detection methods is recommended. The review outlines the current research activities on developing assays including biosensors for the detection of HbA1c. The pros and cons of different techniques for measuring HbA1c are outlined. The performance of current point-of-care HbA1c analyzers available on the market are also compared and discussed. The future perspectives for HbA1c detection and diabetes management are proposed.

Identification of breast cancer through spectroscopic analysis of cell-membrane sialic acid expression

Identification of specific and reliable biomarkers or unique characteristics is significant for cancer molecular diagnosis and cancer therapeutic assessment. As a biomarker, sialic acid expression in human biofluid or on cell surface is one of interest to determine the tumor malignancy and metastasis since it involves in many crucial metabolic processes. In this work, we aimed to develop a molecular diagnosis method to make it possible to distinguish human breast cancer and normal tissues by capturing rich spectral features of phenyboronic acid-based nanoprobe (MPBA@AgNP) when it binds to sialic acid on cell surface. We analyzed and found that the marker bands at 1074 and 1570 cm^-1 recorded by Surface-enhanced Raman spectroscopy (SERS) displayed discernible spectral differences in vitro cell lines. Density functional theory (DFT) was further used to explore and support the detailed changes of vibrational modes affected by sialic acid. This method is generally applicable by testing three types of in vitro cell lines (HepG2, Hela, BNL.CL2) and one pair of the tissue sections (cancer tissue and normal tissue) from the human breast regions. Besides, the area under receiver operating characteristic (ROC) curves for 1074 and 1572 cm^-1 are 0.9419 and 0.9023, confirming determination of the specific molecular expression by the spectral features holds potential promise for improving cancer detection accuracy. Furthermore, sialic acid expression and distribution acquired of breast tissues by confocal SERS mapping further indicated our method is possible for cancer early diagnosis and toward to real-time in vivo study.

Proton-Gated Rectification Regimes in Nanofluidic Diodes Switched by Chemical Effectors

During the last decade, nanofluidic devices based on solid-state nanopores and nanochannels have come into scene in materials science and will not leave anytime soon. One of the main reasons for this is the excellent control over ionic transport exerted by such devices that promises further important advances when integrated into more complex molecular devices. As a result, pH, temperature, and voltage-regulated devices have been obtained. However, nowadays, there is still a necessity for molecule-driven nanofluidic devices. Here, a sugar-regulated pH-responsive nanofluidic diode is presented obtained by surface modification of conical polycarbonate nanochannels with electropolymerized 3-aminophenylboronic acid. Control over the ionic transport has been achieved by a successful decoration of asymmetric nanochannels with integrated molecular systems. The as-synthesized boronate-appended zwitterionic polymer exhibits an acid-base equilibrium that depends on the concentration of sugar, which ultimately acts as a chemical effector setting different pH-dependent rectification regimes. As a result, the same nanodevice can perform completely different proton-regulated nanofluidic operations, i.e., anion-driven rectification, cation-driven rectification, and no rectification, by simply varying the concentration of fructose in the electrolyte solution.

Development of an electrophoretic method based on nanostructured materials for HbA1c determination

Glycosylated hemoglobin (HbA1c) detection is performed routinely in hospitals as it is the most widespread confirmatory diagnosis of diabetes mellitus. Here we present a novel CE method for measuring HbA1c by introducing silica nanoparticles (NPs) modified with a boronic acid derivative (sugar loadings of 51 ± 2 μg/mg) as pseudo-stationary phase. Before the sample injection, SiO₂ NP─B(OH)₂ were introduced via pressure. Electrophoretic separation was explored through variation of the buffer pH and separation voltage, being the best separation, resolution and shorter separation time achieved with a 25 mM phosphate buffer pH 6.5. The calibration curve obtained was expressed as Area = 182.05%^-1 × HbA1c - 377.02; R²  = 0.9826, using a UV/VIS absorbance detector at 415 nm (diode array). No interferences were observed from carbamylated or acetylated hemoglobin and the method shows a noteworthy stability. A paired t-test was applied to compare the developed CE method with a commercial HbA1c test and no significant variations have been observed at a 90% significance level.

An antibody-free assay for simultaneous capture and detection of glycoproteins by surface enhanced Raman spectroscopy

A single-step reaction, antibody-free assay for simultaneous capture and detection of glycoproteins by SERS spectroscopy.

Surface-enhanced Raman spectroscopy study on the structure changes of 4-Mercaptophenylboronic Acid under different pH conditions

4-Mercaptophenylboronic Acid (4-MPBA) plays pivotal role in various fields. The orientation and existing form of the 4-MPBA strongly depend on the pH value of the media. The general aim of this work is to obtain information about the structure changes of 4-MPBA absorbed on Ag nanoparticles in different pH environment. Surface-enhanced Raman spectroscopy (SERS) technique is a simple and rapid method to study adsorption phenomena at molecule level. The investigation is done by means of SERS. In order to interpret the experimental information, a series of SERS spectra is carried out. The relative intensities of the totally symmetric (a₁ mode) and non-totally symmetric (b₂ mode) bands in the SERS spectra of 4-MPBA change depend on the environmental pH values, which is a manifestation of charge transfer (CT) processes. The degree of charge transfer increases with the pH value of the media changing from acidity to alkalinity. The structure changes of MPBA had been carried out in different pH environment. We envision that this approach will be of great significance in related fields of 4-MPBA-involved detection.

Real-Time Monitoring of Insulin Using a Graphene Field-Effect Transistor Aptameric Nanosensor

This paper presents an approach to the real-time, label-free, specific, and sensitive monitoring of insulin using a graphene aptameric nanosensor. The nanosensor is configured as a field-effect transistor, whose graphene-based conducting channel is functionalized with a guanine-rich IGA3 aptamer. The negatively charged aptamer folds into a compact and stable antiparallel or parallel G-quadruplex conformation upon binding with insulin, resulting in a change in the carrier density, and hence the electrical conductance, of the graphene. The change in the electrical conductance is then measured to enable the real-time monitoring of insulin levels. Testing has shown that the nanosensor offers an estimated limit of detection down to 35 pM and is functional in Krebs-Ringer bicarbonate buffer, a standard pancreatic islet perfusion medium. These results demonstrate the potential utility of this approach in label-free monitoring of insulin and in timely prediction of accurate insulin dosage in clinical diagnostics.

High-Precision Profiling of Sialic Acid Expression in Cancer Cells and Tissues Using Background-Free Surface-Enhanced Raman Scattering Tags

Precise profiling of the sialic acid (SA) expression on the membrane of cancer cells is critical for early identification of cancers and assessment of cancer metastasis. However, the complex physiological environments often result in false positives with currently available imaging technologies. Herein, we have established a background-free surface-enhanced Raman scattering (SERS) imaging platform that allows high-precision profiling of SA expression in cancer cells and differentiation of clinically relevant cancer tissues with various metastasis degrees. Three-dimensional Raman imaging technique provided a deeper insight into visualizing the probe distribution and thus the SA expression at the single-cell level, without destructing the cells. This noninvasive, high-precision imaging technique could favor early diagnosis, staging, and monitoring therapeutic responses of cancers that are highly essential in clinical settings.

Sculpturing patterns of plasmonic silver nanoprisms by means of photocatalytic lithography

The controlled shaping of nanoparticles' morphology is one of the pillars of nanotechnology. Here, we demonstrate that photocatalytic lithography, a technique already proved to be useful in materials science, can act as a dry etching technique for noble metal nanoparticles. Triangular silver nanoprisms are self-assembled on titanium dioxide films and photocatalytically shaped into discoidal particles upon irradiation with near-UV light. The obtained patterned surfaces show a dramatically different surface-enhanced Raman scattering response, suggesting the utility of our approach for the development of sensors. The photocatalytic nature of the particle shaping is demonstrated and a plausible mechanism drawn by performing photocatalysis in different configurations (direct and remote) and by irradiating in different solvents.