Design and Understanding of Adaptive Hydrogenation Catalysts Triggered by the H2/CO2-Formic Acid Equilibrium

An adaptive catalytic system for selective hydrogenation was developed exploiting the H2 + CO2 ⇔  HCOOH equilibrium for reversible, rapid, and robust on/off switch of the ketone hydrogenation activity of ruthenium nanoparticles (Ru NPs). The catalyst design was based on mechanistic studies and DFT calculations demonstrating that adsorption of formic acid to Ru NPs on silica results in surface formate species that prevent C═O hydrogenation. Ru NPs were immobilized on readily accessible silica supports modified with guanidinium-based ionic liquid phases (Ru@SILPGB) to generate in situ sufficient amounts of HCOOH when CO2 was introduced into the H2 feed gas for switching off ketone hydrogenation while maintaining the activity for hydrogenation of olefinic and aromatic C═C bonds. Upon shutting down the CO2 supply, the C═O hydrogenation activity was restored in real time due to the rapid decarboxylation of the surface formate species without the need for any changes in the reaction conditions. Thus, the newly developed Ru@SILPGB catalysts allow controlled and alternating production of either saturated alcohols or ketones from unsaturated substrates depending on the use of H2 or H2/CO2 as feed gas. The major prerequisite for design of adaptive catalytic systems based on CO2 as trigger is the ability to shift the H2 + CO2 ⇔  HCOOH equilibrium sufficiently to exploit competing adsorption of surface formate and targeted functional groups. Thus, the concept can be expected to be more generally applicable beyond ruthenium as the active metal, paving the way for next-generation adaptive catalytic systems in hydrogenation reactions more broadly.

Unraveling CO adsorption behaviors and its poisoning effects on ZrCo surface

Theoretical calculations are performed to elucidate the adsorption behaviors and poisoning effects of CO gas on the ZrCo surface, which drastically limits its application in hydrogen isotopic storage. Specifically, the ionic Zr-Co bond on the surface leads to unique CO adsorption structures on different sites. The CO molecule tends to prefer a tilted adsorption configuration on the Co-Co bridge site. The electronic structures, charge distributions, and bonding characteristics are further explored to study the CO adsorption properties, which obey the electron density donation and back-donation mechanism. For different CO coverages, the stepwise adsorption energies of CO increase with the increasing of coverage, reaching the saturated coverage at nCO = 11. Then, the effects of temperature and partial pressure on CO coverage are evaluated using atomic thermodynamics. The computed phase diagram shows that the ZrCo(110) surface has a stable coverage of nCO = 6 at ambient temperature under ultrahigh vacuum conditions. The pre-adsorbed CO molecules lead to the charge redistribution and the d-band center downshift on the surface, which significantly affect hydrogen adsorption and dissociation. Our results provide insights into the poisoning mechanisms of the impurity gas on ZrCo alloys, which can be beneficial for designing high-performance ZrCo-based alloys with improved poisoning tolerance.

The first-principles-based microkinetic simulation of the dry reforming of methane over Ru(0001)

As the temperature was increased, the generation rate of H₂ and CO in the DRM reaction on Ru(0001) gradually increased along with the ratio of H₂/CO generation rate.

Exploring direct and hydrogen-assisted CO activation on iridium surfaces – surface dependent activity

To understand CO activation on iridium surfaces, direct dissociation, H-assisted activation and hydrogenation to methanol were computed on the flat Ir(111) and Ir(100), corrugated Ir(110) and Ir(210), and stepped Ir(311) and Ir(221) surfaces.

Density fluctuations as door-opener for diffusion on crowded surfaces

How particles can move on a catalyst surface that, under the conditions of an industrial process, is highly covered by adsorbates and where most adsorption sites are occupied has remained an open question. We have studied the diffusion of O atoms on a fully CO-covered Ru(0001) surface by means of high-speed/variable-temperature scanning tunneling microscopy combined with density functional theory calculations. Atomically resolved trajectories show a surprisingly fast diffusion of the O atoms, almost as fast as on the clean surface. This finding can be explained by a "door-opening" mechanism in which local density fluctuations in the CO layer intermittently create diffusion pathways on which the O atoms can move with low activation energy.

Phase Controlled Synthesis of Pt Doped Co Nanoparticle Composites Using a Metal-Organic Framework for Fischer–Tropsch Catalysis

Recently, metal nanoparticles embedded in porous carbon composite materials have been playing a significant role in a variety of fields as catalyst supports, sensors, absorbents, and in energy storage. Porous carbon composite materials can be prepared using various synthetic methods; recent efforts provide a facile way to prepare the composites from metal-organic frameworks (MOFs) by pyrolysis. However, it is usually difficult to control the phase of metal or metal oxides during the synthetic process. Among many types of MOF, recently, cobalt-based MOFs have attracted attention due to their unique catalytic and magnetic properties. Herein, we report the synthesis of a Pt doped cobalt based MOF, which is subsequently converted into cobalt nanoparticle-embedded porous carbon composites (Pt@Co/C) via pyrolysis. Interestingly, the phase of the cobalt metal nanoparticles (face centered cubic (FCC) or hexagonal closest packing (HCP)) can be controlled by tuning the synthetic conditions, including the temperature, duration time, and dosage of the reducing agent (NaBH4). The Pt doped Co/C was characterized using various techniques including PXRD (powder X-ray diffraction), XPS (X-ray photoelectron spectroscopy), gas sorption analysis, TEM (transmission electron microscopy), and SEM (scanning electron microscopy). The composite was applied as a phase transfer catalyst (PTC). The Fischer-Tropsch catalytic activity of the Pt@Co/C (10:1:2.4) composite shows 35% CO conversion under a very low pressure of syngas (1 MPa). This is one of the best reported conversion rates at low pressure. The 35% CO conversion leads to the generation of various hydrocarbons (C1, C2–C4, C5, and waxes). This catalyst may also prove useful for energy and environmental applications.

Dense CO Adlayers as Enablers of CO Hydrogenation Turnovers on Ru Surfaces

High CO* coverages lead to rates much higher than Langmuirian treatments predict because co-adsorbate interactions destabilize relevant transition states less than their bound precursors. This is shown here by kinetic and spectroscopic data-interpreted by rate equations modified for thermodynamically nonideal surfaces-and by DFT treatments of CO-covered Ru clusters and lattice models that mimic adlayer densification. At conditions (0.01-1 kPa CO; 500-600 K) which create low CO* coverages (0.3-0.8 ML from in situ infrared spectra), turnover rates are accurately described by Langmuirian models. Infrared bands indicate that adlayers nearly saturate and then gradually densify as pressure increases above 1 kPa CO, and rates become increasingly larger than those predicted from Langmuir treatments (15-fold at 25 kPa and 70-fold at 1 MPa CO). These strong rate enhancements are described here by adapting formalisms for reactions in nonideal and nearly incompressible media (liquids, ultrahigh-pressure gases) to handle the strong co-adsorbate interactions within the nearly incompressible CO* adlayer. These approaches show that rates are enhanced by densifying CO* adlayers because CO hydrogenation has a negative activation area (calculated by DFT), analogous to how increasing pressure enhances rates for liquid-phase reactions with negative activation volumes. Without these co-adsorbate effects and the negative activation area of CO activation, Fischer-Tropsch synthesis would not occur at practical rates. These findings and conceptual frameworks accurately treat dense surface adlayers and are relevant in the general treatment of surface catalysis as it is typically practiced at conditions leading to saturation coverages of reactants or products.

Adsorption and Dissociation of CO2 on Ru(0001)

The adsorption and dissociation of carbon dioxide on a Ru(0001) single crystal surface was investigated by reflection-absorption infrared spectroscopy (RAIRS) and temperature-programmed desorption (TPD) spectroscopy for CO₂ adsorbed at 85 K. RAIRS spectroscopy shows that the adsorption of CO₂ on a Ru(0001) single crystal is partially dissociative, resulting in CO₂ and CO. The CO vibrational mode was also observed to split into two distinct modes, indicating two general populations of CO present at the surface. Furthermore, a time-dependent blue-shift is observed, which is characteristic of increasing CO surface coverage. TPD showed that coverages of up to 0.3 ML were obtained, and no evidence for chemisorption of oxygen on ruthenium was found.

Mechanism of coverage dependent CO adsorption and dissociation on the Mo(100) surface

The mechanism of coverage dependent CO adsorption and dissociation on the Mo(100) surface was investigated using periodic density functional theory. Structure optimization and frequency calculation were carried out using the GGA-PBE method and a p(3 × 3) supercell model. Energetic data have been obtained using the revised PBE method and the PBE optimized structures. CO adsorption prefers tilted adsorption configuration at the 4-fold hollow sites at low coverage and tilted and atop configurations at high coverage. The computed C-O stretching frequencies of the tilted and atop adsorbed CO molecules agree very well with the experimental results. Starting from the saturation coverage, five binding states have been found: two for molecular (α) CO adsorption and three for dissociative (β) CO adsorption, which are in agreement with the temperature-programmed desorption experiments. In addition, CO prefers dissociation with very low barriers in all coverages as long as free sites are available and is coverage independent; this nicely explains the observed CO dissociation at very low temperatures. All such agreements validate our computational methods and provide the basis of further studies.

Theoretical insights into the effect of terrace width and step edge coverage on CO adsorption and dissociation over stepped Ni surfaces

We rationalized Ni(211) as a representative model for stepped surfaces and explored the effect of coverage on CO activation.

An ab initio molecular dynamics study of D2 dissociation on CO-precovered Ru(0001)

In dynamics studies of hydrogen dissociation on CO pre-covered Ru(0001) the simulation cell size is important for describing energy exchange.