Challenges in preparing, preserving and detecting para-water in bulk: overcoming proton exchange and other hurdles

Spin Hyperpolarization in Modern Magnetic Resonance

Magnetic resonance techniques are successfully utilized in a broad range of scientific disciplines and in various practical applications, with medical magnetic resonance imaging being the most widely known example. Currently, both fundamental and applied magnetic resonance are enjoying a major boost owing to the rapidly developing field of spin hyperpolarization. Hyperpolarization techniques are able to enhance signal intensities in magnetic resonance by several orders of magnitude, and thus to largely overcome its major disadvantage of relatively low sensitivity. This provides new impetus for existing applications of magnetic resonance and opens the gates to exciting new possibilities. In this review, we provide a unified picture of the many methods and techniques that fall under the umbrella term "hyperpolarization" but are currently seldom perceived as integral parts of the same field. Specifically, before delving into the individual techniques, we provide a detailed analysis of the underlying principles of spin hyperpolarization. We attempt to uncover and classify the origins of hyperpolarization, to establish its sources and the specific mechanisms that enable the flow of polarization from a source to the target spins. We then give a more detailed analysis of individual hyperpolarization techniques: the mechanisms by which they work, fundamental and technical requirements, characteristic applications, unresolved issues, and possible future directions. We are seeing a continuous growth of activity in the field of spin hyperpolarization, and we expect the field to flourish as new and improved hyperpolarization techniques are implemented. Some key areas for development are in prolonging polarization lifetimes, making hyperpolarization techniques more generally applicable to chemical/biological systems, reducing the technical and equipment requirements, and creating more efficient excitation and detection schemes. We hope this review will facilitate the sharing of knowledge between subfields within the broad topic of hyperpolarization, to help overcome existing challenges in magnetic resonance and enable novel applications.

Polychromatic Excitation of Delocalized Long-Lived Proton Spin States in Aliphatic Chains

Long-lived states (LLS) involving pairs of magnetically inequivalent but chemically equivalent proton spins in aliphatic (CH_{2})_{n} chains can be excited by simultaneous application of weak selective radio frequency fields at n chemical shifts by polychromatic spin-lock induced crossing. The LLS are delocalized throughout the aliphatic chains by mixing of intrapair singlet states and by excitation of LLS comprising products of four and six spin operators. The measured lifetimes T_{LLS} in a model compound are about 5 times longer than T_{1} and are strongly affected by interactions with macromolecules.

Transverse relaxation in fixed tissue: Influence of temperature and resolution on image contrast in magnetic resonance microscopy

To describe transverse relaxation of water in fixed tissue, we propose a model of transverse relaxation accelerated by diffusion and exchange (TRADE) that assumes exchange between free (visible) and bound (invisible) water, which relax by the dipole-dipole interaction, chemical exchange, and translation in the field gradient. Depending on the prevailing mechanism, transverse relaxation time (T₂ ) of water in fixed tissue could increase (when dipole-dipole interaction prevails) or decrease with temperature (when diffusion in the field gradient prevails). Chemical exchange can make T₂ even temperature independent. Also, variation of resolution from 100 to 15 μm/pxl (or less) affects effective transverse relaxation. T₂ steadily decreases with increased resolution ( T 2 ∝ ∆ x 2 , ∆ x is the read direction resolution). TRADE can describe all of these observations (semi)quantitatively. The model has been experimentally verified on water phantoms and on formalin-fixed zebrafish, mouse brain, and rabbit larynx tissues. TRADE could help predict optimal scanning parameters for high-resolution MRM from much faster measurements at lower resolution.

Solvent-mediated isotope effects strongly influence the early stages of calcium carbonate formation: exploring D2O vs. H2O in a combined computational and experimental approach

In experimental studies, heavy water (D₂O) is employed, e.g., so as to shift the spectroscopic solvent background, but any potential effects of this solvent exchange on reaction pathways are often neglected. While the important role of light water (H₂O) during the early stages of calcium carbonate formation has been realized, studies into the actual effects of aqueous solvent exchanges are scarce. Here, we present a combined computational and experimental approach to start to fill this gap. We extended a suitable force field for molecular dynamics (MD) simulations. Experimentally, we utilised advanced titration assays and time-resolved attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. We find distinct effects in various mixtures of the two aqueous solvents, and in pure H₂O or D₂O. Disagreements between the computational results and experimental data regarding the stabilities of ion associates might be due to the unexplored role of HDO, or an unprobed complex phase behaviour of the solvent mixtures in the simulations. Altogether, however, our data suggest that calcium carbonate formation might proceed "more classically" in D₂O. Also, there are indications for the formation of new structures in amorphous and crystalline calcium carbonates. There is huge potential towards further improving the understanding of mineralization mechanisms by studying solvent-mediated isotope effects, also beyond calcium carbonate. Last, it must be appreciated that H₂O and D₂O have significant, distinct effects on mineralization mechanisms, and that care has to be taken when experimental data from D₂O studies are used, e.g., for the development of H₂O-based computer models.

Frozen water NMR lineshape analysis enables absolute polarization quantification

Typical magnetic resonance experiments are routinely limited by weak signal responses. In some cases, the low intrinsic sensitivity can be alleviated by the implementation of hyperpolarization technologies. Dissolution-dynamic nuclear polarization offers a means of hyperpolarizing small molecules. Hyperpolarized water is employed in several dynamic nuclear polarization studies, and hence accurate and rapid quantification of the ¹H polarization level is of utmost importance. The solid-state nuclear magnetic resonance spectrum of water acquired under dissolution-dynamic nuclear polarization conditions has revealed lineshapes which become asymmetric at high levels of ¹H polarization, which is an interesting fundamental problem in itself, but also complicates data interpretation and can prevent correct estimations of polarization levels achieved. In previous studies, attempts to simulate the ¹H spectral lineshape of water as a function of the ¹H polarization led to significant disagreement with the experimental results. Here we propose and demonstrate that such simulations, and therefore polarization quantification, can be implemented accurately, in particular by taking into account the detector dead time during ¹H signal acquisition that can lead to severe spectral distortions. Based on these findings, we employed an echo-based radiofrequency pulse sequence to achieve distortion-free ¹H spectra of hyperpolarized water, and adequate simulations of these echo-based spectra were implemented to extract the absolute ¹H polarization level from the hyperpolarized water signal only, thus alleviating the need for lengthy and insensitive measurements of thermal equilibrium signals.

Practical dissolution dynamic nuclear polarization

This review article intends to provide insightful advice for dissolution-dynamic nuclear polarization in the form of a practical handbook. The goal is to aid research groups to effectively perform such experiments in their own laboratories. Previous review articles on this subject have covered a large number of useful topics including instrumentation, experimentation, theory, etc. The topics to be addressed here will include tips for sample preparation and for checking sample health; a checklist to correctly diagnose system faults and perform general maintenance; the necessary mechanical requirements regarding sample dissolution; and aids for accurate, fast and reliable polarization quantification. Herein, the challenges and limitations of each stage of a typical dissolution-dynamic nuclear polarization experiment are presented, with the focus being on how to quickly and simply overcome some of the limitations often encountered in the laboratory.

Solid-state 1H spin polarimetry by 13CH3 nuclear magnetic resonance

Dissolution dynamic nuclear polarization is used to prepare nuclear spin polarizations approaching unity. At present, 1 H polarization quantification in the solid state remains fastidious due to the requirement of measuring thermal equilibrium signals. Line shape polarimetry of solid-state nuclear magnetic resonance spectra is used to determine several useful properties regarding the spin system under investigation. In the case of highly polarized nuclear spins, such as those prepared under the conditions of dissolution dynamic nuclear polarization experiments, the absolute polarization of a particular isotopic species within the sample may be directly inferred from the characteristics of the corresponding resonance line shape. In situations where direct measurements of polarization are complicated by deleterious phenomena, indirect estimates of polarization using coupled heteronuclear spins prove informative. We present a simple analysis of the 13 C spectral line shape of [2-13 C]sodium acetate based on the normalized deviation of the centre of gravity of the 13 C peaks, which can be used to indirectly evaluate the proton polarization of the methyl group moiety and very likely the entire sample in the case of rapid and homogeneous 1 H-1 H spin diffusion. For the case of positive microwave irradiation, 1 H polarization was found to increase with an increasing normalized centre of gravity deviation. These results suggest that, as a dopant, [2-13 C]sodium acetate could be used to indirectly gauge 1 H polarizations in standard sample formulations, which is potentially advantageous for (i) samples polarized in commercial dissolution dynamic nuclear polarization devices that lack 1 H radiofrequency hardware, (ii) measurements that are deleteriously influenced by radiation damping or complicated by the presence of large background signals and (iii) situations where the acquisition of a thermal equilibrium spectrum is not feasible.

Graphene Oxide Membranes for Isotopic Water Mixture Filtration: Preparation, Physicochemical Characterization, and Performance Assessment

There is an increasing demand for nuclear reactors, driven by the global need for low CO₂ producing energy sources. The use of light (H₂O) or heavy water (D₂O) in a nuclear reactor environment produces radioactive tritiated heavy (HTO, DTO) water as an inevitable contaminant. Considering the need for tritiated water removal and also the high commercial value of purified water isotopes, technologies that can efficiently separate isotopic mixtures of water in nuclear reactors are highly desirable. This study presents an experimental approach for producing graphene oxide (GO) membranes and assessing their performance in the filtration of isotopic water mixtures. Specifically, using D₂O/H₂O mixtures as model systems, we investigate the effect of physicochemical properties of GO, as well as membrane preparation conditions on membrane filtration efficiency. We find that membranes assembled using larger GO platelets of lower oxidation level generally exhibit higher deuterated water (HDO, D₂O) rejection and filtrate flux. Moreover, membrane preparation conditions have a strong impact on the interlayer space between stacked GO nanoplatelets in the membrane, hence as a direct effect on filtration performance. Our experimental results also show a strong, nonmonotonic dependence of separation performance on operating temperature, as well as the existence of local temperature optima. Our work provides guidelines for simple and scalable preparation of GO membranes with very good mechanical stability, capable of achieving efficient separation of isotopic water.

Spin Thermometry: A Straightforward Measure of Millikelvin Deuterium Spin Temperatures Achieved by Dynamic Nuclear Polarization

Dynamic nuclear polarization of samples at low temperatures, typically between 1.2 and 4.2 K, allows one to achieve spin temperatures of as low as 2 mK so that for many nuclear isotopes the high-temperature approximation is violated for the nuclear Zeeman interaction. This leads to characteristic asymmetries in powder spectra. We show that the line shapes due to the quadrupolar couplings of deuterium spins present in virtually all solvents used for such experiments (DNP juice) allow the quick yet accurate determination of the deuterium spin temperature or, equivalently, the deuterium polarization. The observation of quadrupolar echoes excited by small flip-angle pulses allows one to monitor the build-up and decay of the positive or negative deuterium polarization.

Orientation-Dependent Proton Relaxation of Water Molecules Trapped in Solids: Crystallites with Long-Lived Magnetization

The longitudinal spin-lattice relaxation properties of water molecules trapped in a static powdered polycrystalline sample of barium chlorate monohydrate are investigated by means of solid-state ¹H NMR spectroscopy. Different portions of the inhomogeneous Pake pattern that are associated with crystallites at different orientations with respect to the external magnetic field show either a mono- or a biexponential recovery. At high field (9.4 T), the chemical shift anisotropy is the main interaction that is responsible for the inhomogeneity of the relaxation rates. A theoretical description of rapid two-site hopping about the H-O-H bisector in the framework of Liouville space agrees very well with the experimental evidence. Numerical simulations predict a distribution of monoexponential time constants associated with individual single-crystal orientations. Overlapping signals give rise to biexponential recovery. This is confirmed experimentally by ¹H NMR spectra of static single crystals.

Application and methodology of dissolution dynamic nuclear polarization in physical, chemical and biological contexts

Dissolution dynamic nuclear polarization (d-DNP) is a versatile method to enhance nuclear magnetic resonance (NMR) spectroscopy. It boosts signal intensities by four to five orders of magnitude thereby providing the potential to improve and enable a plethora of applications ranging from the real-time monitoring of chemical or biological processes to metabolomics and in-cell investigations. This perspectives article highlights possible avenues for developments and applications of d-DNP in biochemical and physicochemical studies. It outlines how chemists, biologists and physicists with various fields of interest can transform and employ d-DNP as a powerful characterization method for their research.

Cross-term Splittings Due to the Orientational Inequivalence of Proton Magnetic Shielding Tensors: Do Water Molecules Trapped in Crystals Hop or Tunnel?

Water molecules trapped in crystals of barium chlorate monohydrate have been investigated by magic-angle spinning (MAS) proton NMR spectroscopy in the temperature range 110-300 K. At high temperatures, a single spinning sideband pattern is observed. Below 150 K, however, two interleaved spinning sideband manifolds appear, with distinct centerbands that do not coincide with the average isotropic chemical shift seen at high temperatures. This hitherto unknown "cross-term splitting" results from the interplay of the homonuclear dipole-dipole coupling and two anisotropic proton shielding tensors that have identical principal components but nonequivalent orientations. The resulting cross terms cannot be averaged out by rotation about the magic angle. The analysis of the exchange-induced broadening, coalescence, and narrowing of the cross-term splitting in MAS spectra allows one to estimate the rate of exchange of the two protons between 140 and 190 K. The experimental data is compared with ²H and ¹H NMR studies of the same sample reported in the literature. Density functional theory methods are utilized to estimate the thermal activation energy for a 2-fold hopping process of proton exchange about the H-O-H bisector. The Bell-Limbach model allows one to take into account contributions due to incoherent quantum tunneling in the low-temperature regime.

Long-lived water clusters in hydrophobic solvents investigated by standard NMR techniques

Unusual physical characteristics of water can be easier explained and understood if properties of water clusters are revealed. Experimental investigation of water clusters has been reported by highly specialized equipment and/or harsh experimental conditions and has not determined the properties and the formation processes. In the current work, we used standard ¹H-NMR as a versatile and facile tool to quantitatively investigate water clusters in the liquid phase under ambient conditions. This approach allows collection of data regarding the formation, long lifetime, stability, and physical properties of water clusters, as a cubic octamer in the liquid phase.

Generating para-water from para-hydrogen: A Gedankenexperiment

A novel conceptual approach is described that is based on the transfer of hyperpolarization from para-hydrogen in view of generating a population imbalance between the two spin isomers of H₂O. The approach is analogous to SABRE (Signal Amplification By Reversible Exchange) and makes use of the transfer of spin order from para-hydrogen to H₂O in a hypothetical organometallic complex. The spin order transfer is expected to be most efficient at avoided level crossings. The highest achievable enrichment levels of para- and ortho-water are discussed.

Spin-Isomer Conversion of Water at Room Temperature and Quantum-Rotor-Induced Nuclear Polarization in the Water-Endofullerene H_{2}O@C_{60}

Water exists in two forms, para and ortho, that have nuclear spin states with different symmetries. Here we report the conversion of fullerene-encapsulated para water to ortho water. The enrichment of para water at low temperatures is monitored via changes in the electrical polarizability of the material. Upon rapid dissolution of the material in toluene the excess para water converts to ortho water. In H_{2}^{16}O@C_{60} the conversion leads to a slow increase in the NMR signal. In H_{2}^{17}O@C_{60} the conversion gives rise to weak signal enhancements attributed to quantum-rotor-induced nuclear spin polarization. The time constants for the para-to-ortho conversion of fullerene-encapsulated water in ambient temperature solution are estimated as 30±4  s for the ^{16}O isotopolog of water, and 16±3  s for the ^{17}O isotopolog.

Discovery of a Unique Sinusoidal Frequency for the Effective Magnetic Treatment of Brackish Water

Magnetic treatment of aqueous solutions containing dissolved CaCO3 is known to affect its precipitation exerted by heating or raising the pH of the solution. In this work, experiments have been performed on two kinds of water: (a) a simulated water containing only CaCO3 as dissolved salt and (b) a real brackish water sample of high total hardness from an industrial area containing a wide range of impurity salts. It has been discovered for the first time that using a sinusoidal magnetic field, treatment at a frequency of ca. 150 kHz (for a range of 0–1000 kHz) results in the maximum calcite precipitation independent of the initial water composition. The discovered phenomenon could be explained based on the resonance taking place due to the synchronization of the induced magnetic field with the proton exchange rate of water molecules.

Collisional cross-section of water molecules in vapour studied by means of 1H relaxation in NMR

In gas phase, collisions that affect the rotational angular momentum lead to the return of the magnetization to its equilibrium (relaxation) in Nuclear Magnetic Resonance (NMR). To the best of our knowledge, the longitudinal relaxation rates R₁ = 1/T₁ of protons in H₂O and HDO have never been measured in gas phase. We report R₁ in gas phase in a field of 18.8 T, i.e., at a proton Larmor frequency ν₀ = 800 MHz, at temperatures between 353 and 373 K and pressures between 9 and 101 kPa. By assuming that spin rotation is the dominant relaxation mechanism, we estimated the effective cross-section σ_J for the transfer of angular momentum due to H₂O-H₂O and HDO-D₂O collisions. Our results allow one to test theoretical predictions of the intermolecular potential of water in gas phase.