Vacancy-Engineered 1D Nanorods with Spatially Segregated Dual Redox Sites for Visible-Light-Driven Cooperative CO2 Reduction

Cooperative CO2 photoreduction with tailored organic synthesis offers a potent avenue for harnessing concurrently generated electrons and holes, facilitating the creation of both solar fuels and specialized chemical compounds. However, controlling the crystallization and morphologies of metal-free molecular nanostructures with exceptional photocatalytic activities toward CO2 reduction remains a significant challenge. These hurdles encompass insufficient CO2 activation potential, sluggish multielectron processes, delayed charge-separation kinetics, inadequate storage of long-lived photoexcitons, unfavorable thermodynamic conditions, and the precise control of product selectivity. Here, melem oligomer 2D nanosheets (MNSs) synthesized through pyrolysis are transformed into 1D nanorods (MNRs) at room temperature with the simultaneous engineering of vacancies and morphology. Transient absorption spectral analysis reveals that vacancies in MNRs trap charges, extending charge carrier lifetimes. Additionally, carbon vacancies enhance CO2 adsorption by increasing amine functional centers. The photocatalytic performance of MNRs for CO2 reduction coupled with benzyl alcohol oxidation is approximately ten times higher (CH3OH and aromatic aldehyde production rate 27 ± 0.5 and 93 ± 0.5 mmol g-1 h-1, respectively) than for the MNSs (CH3OH and aromatic aldehyde production rate 2.9 ± 0.5 and 9 ± 0.5 mmol g-1 h-1, respectively). The CO2 reduction pathway involved the carbon-coordinated formyl pathway through the formation of *COOH and *CHO intermediates, as mapped by in situ Fourier-transform infrared spectroscopy. The superior performance of MNRs is attributed to favorable energy-level alignment, enriched amine surfaces, and unique morphology, enhancing solar-to-chemical conversion.

Efficient Solar Cells Based on Concerted Companion Dyes Containing Two Complementary Components: An Alternative Approach for Cosensitization

With the purpose to achieve panchromatic absorption for constructing efficient dye-sensitized solar cells (DSSCs), the cosensitization approach of using two dyes with complementary absorption has been developed with great success. However, this approach usually requires time-consuming optimization of a number of parameters for controlling the ratio and distribution of the two coadsorbed dyes on TiO₂ film, which limits the potentials of this strategy. We herein report an alternative approach for developing efficient DSSCs by designing a class of "concerted companion dyes" with two complementary dye components linked covalently. Thus, a newly synthesized organic dye Z2 was linked to a recently reported doubly strapped porphyrin dye XW51 through flexible chains with various lengths to afford XW60-XW63. These dyes exhibit excellent absorption and efficiencies in the range of 8.8%-11.7%. Notably, upon coadsorption with chenodeoxycholic acid, XW61 affords an impressive efficiency of 12.4%, a record for iodine electrolyte-based DSSCs, to the best of our knowledge. In addition, these dyes also exhibit the advantages of easy cell fabrication, simple optimization, as well as excellent photostability.

Understanding the effects of the co-sensitizing ratio on the surface potential, electron injection efficiency, and Förster resonance energy transfer

Multiple absorbers that function in different absorption regions (near infra-red (NIR) and UV-Visible (UV-Vis)) have been widely used in solar cell applications to enhance the light-harvesting.

Simple thiophene-bridged D-π-A type chromophores for DSSCs: a comprehensive study of their sensitization and co-sensitization properties

Herein, we report the design and synthesis of four new thiophene-bridged D-π-A configured organic dyes T1-4 comprising different donors, π-spacers and anchoring units, as potential sensitizers and co-sensitizers for DSSCs. The current work also highlights their structural, photophysical, thermal, electrochemical, theoretical, and photoelectrochemical studies, including evaluation of their structure-property relationships. The optical results revealed that the dyes T1-4 display λabs and λemi in the range of 402-461 nm and 556-575 nm, respectively, with a bandgap in the order of 2.31-2.58 eV. Furthermore, the results showed that the dyes possess all the pre-requisites to act as sensitizers/co-sensitizers. Among the tested dyes, the device based on sensitizer T2 achieved the highest PCE compared to the other three dyes, under the standard conditions. Furthermore, their co-sensitized devices were fabricated by co-adsorbing them with the well-known Ru-based MH-12 sensitizer and interestingly the co-sensitizer T3 carrying an alkoxy group and a barbituric acid anchor displayed the highest PCE of 8.79%, which is much higher than that of MH-12 alone (8.18%). Conclusively, the study furnishes a deeper understanding of the intricacies involved in the structural modification of sensitizers/co-sensitizers in achieving an enhanced performance of the devices.

Data on the porphyrin effect and influence of dopant ions on Thaumatococcus daniellii dye as sensitizer in dye-sensitized solar cells

In this work, data on the effect of porphyrin characteristic of UV/VIS absorption of Thaumatococcus daniellii (T. daniellii) dye-sensitized solar cells sensitized with different electrolytes were presented. The influence of dopants from 1 g/100 ml electrolyte: distilled water and applied time difference of 3 min is observed on the photovoltaic characteristics and performance of the deposited thin film. The output efficiency and incident photon to conversion efficiency of T. daniellii dye-sensitized solar cells was acquired and could be further used as a model for designing dye-sensitized solar models as substitute for silicon solar cells

Designing Push-Pull Porphyrins for Efficient Dye-Sensitized Solar Cells

Over the past decade, tremendous effort has been made to improve the light-harvesting ability of push-pull porphyrin dyes. Despite notable success achieved in this direction, push-pull porphyrin dyes still suffer from a poor light-harvesting efficiency owing to the lack of absorption between the Soret and Q-bands. To tackle this issue, here we design a series of push-pull porphyrin dyes with anchoring groups either at meso- or β-position using calculations based on first-principles time-dependent density functional theory. In contrast to the common perception, we find that porphyrin dyes bearing an electron-donor at the meso-position and an electron-acceptor at the β-position produce an additional extended band between the Soret and Q-bands appearing at around 500 nm due to S₀ → S₃ excitation, leading to a much higher light-harvesting performances compared to meso- and β-disubstituted ones. In addition, changing the π-conjugated linker at the acceptor site from ethylene linker (C═C) to acetylene linker (C≡C) further improves the light-harvesting ability of meso-β-porphyrin dyes, making them promising candidates for dye-sensitized solar cell application.

Porphyrin-sensitized solar cells: systematic molecular optimization, coadsorption and cosensitization

As a promising low-cost solar energy conversion technique, dye-sensitized solar cells have undergone spectacular development since 1991. For practical applications, improvement of power conversion efficiency has always been one of the major research topics. Porphyrins are outstanding sensitizers endowed with strong sunlight harvesting ability in the visible region and multiple reaction sites available for functionalization. However, judicious molecular design in consideration of light-harvest, energy levels, operational dynamics, adsorption geometry and suppression of back reactions is specifically required for achieving excellent photovoltaic performance. This feature article highlights some of the recently developed porphyrin sensitizers, especially focusing on the systematic dye structure optimization approach in combination with coadsorption and cosensitization methods in pursuing higher efficiencies. Herein, we expect to provide more insights into the structure-performance correlation and molecular engineering strategies in a stepwise manner.

Highly efficient stereoscopic phenothiazine dyes with different anchors for dye-sensitized solar cells

For DSSCs based on stereoscopic phenothiazine dyes, JA6 with a cyanoacrylic acid anchor shows the highest PCE of 7.34%.

Access to small molecule semiconductors via C–H activation for photovoltaic applications

Reporting ruthenium carboxylate-catalysed single step oxidative cross coupling that challenges the conventional Stille and Suzuki coupling reactions, to afford BT and MFBT derivatives.

Role of Co-Sensitizers in Dye-Sensitized Solar Cells

Co-sensitization is a popular route towards improved efficiency and stability of dye-sensitized solar cells (DSSCs). In this context, the power conversion efficiency (PCE) values of DSSCs incorporating Ru- and porphyrin-based dyes can be improved from 8-11 % to 11-14 % after the addition of additives, co-adsorbents, and co-sensitizers that reduce aggregation and charge recombination in the device. Among the three supporting material types, co-sensitizers play a major role to enhance the performance and stability of DSSCs, which is requried for commercialization. In this Minireview, we highlight the role co-sensitizers play in improving photovoltaic performance of devices containing Ru- and porphyrin-based sensitizers.

Stepwise co-sensitization of two metal-based sensitizers: probing their competitive adsorption for improving the photovoltaic performance of dye-sensitized solar cells

How to graft co-sensitizers with different strengths such as LP-2 and N719 onto TiO₂ surfaces for enhancing the performance of dye-sensitized solar cells (DSSCs) has been investigated in detail.

Filled and empty states of Zn-TPP films deposited on Fe(001)-p(1×1)O

Zn-tetraphenylporphyrin (Zn-TPP) was deposited on a single layer of metal oxide, namely an Fe(001)-p(1×1)O surface. The filled and empty electronic states were measured by means of UV photoemission and inverse photoemission spectroscopy on a single monolayer and a 20 monolayer thick film. The ionization energy and the electron affinity of the organic film were deduced and the interface dipole was determined and compared with data available in the literature.

Thermally-induced single-crystal-to-single-crystal transformations from a 2D two-fold interpenetrating square lattice layer to a 3D four-fold interpenetrating diamond framework and its application in dye-sensitized solar cells

In this work, a rare 2D → 3D single-crystal-to-single-crystal transformation (SCSC) is observed in metal-organic coordination complexes, which is triggered by thermal treatment. The 2D two-fold interpenetrating square lattice layer [Cd(IBA)2]n (1) is irreversibly converted into a 3D four-fold interpenetrating diamond framework {[Cd(IBA)2(H2O)]·2.5H2O}n (2) (HIBA = 4-(1H-imidazol-1-yl)benzoic acid). Consideration is given to these two complexes with different interpenetrating structures and dimensionality, and their influence on photovoltaic properties are studied. Encouraged by the UV-visible absorption and HOMO-LUMO energy states matched for sensitizing TiO2, the two complexes are employed in combination with N719 in dye-sensitized solar cells (DSSCs) to compensate absorption in the ultraviolet and blue-violet region, offset competitive visible light absorption of I3(-) and reducing charge the recombination of injected electrons. After co-sensitization with 1 and 2, the device co-sensitized by 1/N719 and 2/N719 to yield overall efficiencies of 7.82% and 8.39%, which are 19.94% and 28.68% higher than that of the device sensitized only by N719 (6.52%). Consequently, high dimensional interpenetrating complexes could serve as excellent co-sensitizers and have application in DSSCs.

New indole based co-sensitizers for dye sensitized solar cells exceeding 10% efficiency

In this work, we report the molecular engineering and synthesis of three novel indole co-sensitizers DBA-3, DBA-4 and DBA-5 with D–D–A (donor–donor–acceptor) architecture.

High performance dye-sensitized solar cell from a cocktail solution of a ruthenium dye and metal free organic dye

A Ru-based dye K-60 and a metal free D–A organic dye Y1 have been employed for the fabrication of a mixed dye sensitized solar cell (MDSSCs) system.