Freezing and melting line invariants of the Lennard-Jones system

Fingerprints of ordered self-assembled structures in the liquid phase of a hard-core, square-shoulder system

We investigate the phase ordering (pattern formation) of systems of two-dimensional core-shell particles using Monte Carlo (MC) computer simulations and classical density functional theory (DFT). The particles interact via a pair potential having a hard core and a repulsive square shoulder. Our simulations show that on cooling, the liquid state structure becomes increasingly characterized by long wavelength density modulations and on further cooling forms a variety of other phases, including clustered, striped, and other patterned phases. In DFT, the hard core part of the potential is treated using either fundamental measure theory or a simple local density approximation, whereas the soft shoulder is treated using the random phase approximation. The different DFTs are benchmarked using large-scale grand-canonical-MC and Gibbs-ensemble-MC simulations, demonstrating their predictive capabilities and shortcomings. We find that having the liquid state static structure factor S(k) for wavenumber k is sufficient to identify the Fourier modes governing both the liquid and solid phases. This allows us to identify from easier-to-obtain liquid state data the wavenumbers relevant to the periodic phases and to predict roughly where in the phase diagram these patterned phases arise.

Models to predict configurational adiabats of Lennard-Jones fluids and their transport coefficients

A comparison is made between three simple approximate formulas for the configurational adiabat (i.e., constant excess entropy, sex) lines in a Lennard-Jones (LJ) fluid, one of which is an analytic formula based on a harmonic approximation, which was derived by Heyes et al. [J. Chem. Phys. 159, 224504 (2023)] (analytic isomorph line, AIL). Another is where the density is normalized by the freezing density at that temperature (freezing isomorph line, FIL). It is found that the AIL formula and the average of the freezing density and the melting density ("FMIL") are configurational adiabats at all densities essentially down to the liquid-vapor binodal. The FIL approximation departs from a configurational adiabat in the vicinity of the liquid-vapor binodal close to the freezing line. The self-diffusion coefficient, D, shear viscosity, ηs, and thermal conductivity, λ, in macroscopic reduced units are essentially constant along the AIL and FMIL at all fluid densities and temperatures, but departures from this trend are found along the FIL at high liquid state densities near the liquid-vapor binodal. This supports growing evidence that for simple model systems with no or few internal degrees of freedom, isodynes are lines of constant excess entropy. It is shown that for the LJ fluid, ηs and D can be predicted accurately by an essentially analytic procedure from the high temperature limiting inverse power fluid values (apart from at very low densities), and this is demonstrated quite well also for the experimental argon viscosity.

Melting Is Well-Known, but Is It Also Well-Understood?

Contrary to continuous phase transitions, where renormalization group theory provides a general framework, for discontinuous phase transitions such a framework seems to be absent. Although the thermodynamics of the latter type of transitions is well-known and requires input from two phases, for melting a variety of one-phase theories and models based on solids has been proposed, as a generally accepted theory for liquids is (yet) missing. Each theory or model deals with a specific mechanism using typically one of the various defects (vacancies, interstitials, dislocations, interstitialcies) present in solids. Furthermore, recognizing that surfaces are often present, one distinguishes between mechanical or bulk melting and thermodynamic or surface-mediated melting. After providing the necessary preliminaries, we discuss both types of melting in relation to the various defects. Thereafter we deal with the effect of pressure on the melting process, followed by a discussion along the line of type of materials. Subsequently, some other aspects and approaches are dealt with. An attempt to put melting in perspective concludes this review.

Vibrational model for thermal conductivity of Lennard-Jones fluids: Applicability domain and accuracy level

Exact mechanisms of thermal conductivity in liquids are not well understood, despite a rich research history. A vibrational model of energy transfer in dense simple liquids with soft pairwise interactions seems adequate to partially fill this gap. The purpose of the present paper is to define its applicability domain and to demonstrate how well it works within the identified applicability domain in the important case of the Lennard-Jones model system. The existing results from molecular dynamics simulations are used for this purpose. Additionally, we show that a freezing density scaling approach represents a very powerful tool to estimate the thermal conductivity coefficient across essentially the entire gas-liquid region of the phase diagram, including metastable regions. A simple practical expression serving this purpose is proposed.

Approach to hyperuniformity in a metallic glass-forming material exhibiting a fragile to strong glass transition

We investigate a metallic glass-forming (GF) material (Al₉₀Sm₁₀) exhibiting a fragile-strong (FS) glass-formation by molecular dynamics simulation to better understand this highly distinctive pattern of glass-formation in which many of the usual phenomenological relations describing relaxation times and diffusion of ordinary GF liquids no longer apply, and where instead genuine thermodynamic features are observed in response functions and little thermodynamic signature is exhibited at the glass transition temperature, T_g. Given the many unexpected similarities between the thermodynamics and dynamics of this metallic GF material with water, we first focus on the anomalous static scattering in this liquid, following recent studies on water, silicon and other FS GF liquids. We quantify the "hyperuniformity index" H of our liquid, which provides a quantitative measure of molecular "jamming". To gain insight into the T-dependence and magnitude of H, we also estimate another more familiar measure of particle localization, the Debye-Waller parameter 〈u²〉 describing the mean-square particle displacement on a timescale on the order of the fast relaxation time, and we also calculate H and 〈u²〉 for heated crystalline Cu. This comparative analysis between H and 〈u²〉 for crystalline and metallic glass materials allows us to understand the critical value of H on the order of 10^-3 as being analogous to the Lindemann criterion for both the melting of crystals and the "softening" of glasses. We further interpret the emergence of FS GF and liquid-liquid phase separation in this class of liquids to arise from a cooperative self-assembly process in the GF liquid.

Scaling Properties of Liquid Dynamics Predicted from a Single Configuration: Small Rigid Molecules

Isomorphs are curves in the thermodynamic phase diagram along which structure and dynamics are invariant to a good approximation. There are two main ways to trace out isomorphs, the configurational-adiabat method and the direct-isomorph-check method. Recently a new method based on the scaling properties of forces was introduced and shown to work very well for atomic systems [T. B. Schrøder, Phys. Rev. Lett. 2022, 129, 245501]. A unique feature of this method is that it only requires a single equilibrium configuration for tracing out an isomorph. We here test generalizations of this method to molecular systems and compare to simulations of three simple molecular models: the asymmetric dumbbell model of two Lennard-Jones spheres, the symmetric inverse-power-law dumbbell model, and the Lewis-Wahnström o-terphenyl model. We introduce and test two force-based and one torque-based methods, all of which require just a single configuration for tracing out an isomorph. Overall, the method based on requiring invariant center-of-mass reduced forces works best.

Departures from perfect isomorph behavior in Lennard-Jones fluids and solids

Isomorphs are lines on a fluid or solid phase diagram along which the microstructure is invariant on affine density scaling of the molecular coordinates. Only inverse power (IP) and hard sphere potential systems are perfectly isomorphic. This work provides new theoretical tools and criteria to determine the extent of deviation from perfect isomorphicity for other pair potentials using the Lennard-Jones (LJ) system as a test case. A simple prescription for predicting isomorphs in the fluid range using the freezing line as a reference is shown to be quite accurate for the LJ system. The shear viscosity and self-diffusion coefficient scale well are calculated using this method, which enables comments on the physical significance of the correlations found previously in the literature to be made. The virial–potential energy fluctuation and the concept of an effective IPL system and exponent, n′, are investigated, particularly with reference to the LJ freezing and melting lines. It is shown that the exponent, n′, converges to the value 12 at a high temperature as ∼ T−1/2, where T is the temperature. Analytic expressions are derived for the density, temperature, and radius derivatives of the radial distribution function along an isomorph that can be used in molecular simulation. The variance of the radial distribution function and radial fluctuation function are shown to be isomorph invariant.

Configurational temperature in active matter. II. Quantifying the deviation from thermal equilibrium

This paper proposes using the configurational temperature T_{conf} for quantifying how far an active-matter system is from thermal equilibrium. We measure this "distance" by the ratio of the systemic temperature T_{s} to T_{conf}, where T_{s} is the canonical-ensemble temperature for which the average potential energy is equal to that of the active-matter system. T_{conf} is "local" in the sense that it is the average of a function, which depends only on how the potential energy varies in the vicinity of a given configuration. In contrast, T_{s} is a global quantity. The quantity T_{s}/T_{conf} is straightforward to evaluate in a computer simulation; equilibrium simulations in conjunction with a single steady-state active-matter configuration are enough to determine T_{s}/T_{conf}. We validate the suggestion that T_{s}/T_{conf} quantifies the deviation from thermal equilibrium by data for the radial distribution function of the 3D Kob-Andersen and 2D Yukawa active-matter models with active Ornstein-Uhlenbeck and active Brownian Particle dynamics. Moreover, we show that T_{s}/T_{conf}, structure, and dynamics of the homogeneous phase are all approximately invariant along the motility-induced phase separation boundary in the phase diagram of the 2D Yukawa model. The measure T_{s}/T_{conf} is not limited to active matter and can be used for quantifying how far any system involving a potential-energy function, e.g., a driven Hamiltonian system, is from thermal equilibrium.

Freezing density scaling of fluid transport properties: Application to liquified noble gases

A freezing density scaling of transport properties of the Lennard-Jones fluid is rationalized in terms of the Rosenfeld's excess entropy scaling and isomorph theory of Roskilde-simple systems. Then, it is demonstrated that the freezing density scaling operates reasonably well for viscosity and thermal conductivity coefficients of liquid argon, krypton, and xenon. Quasi-universality of the reduced transport coefficients at their minima and at freezing conditions is discussed. The magnitude of the thermal conductivity coefficient at the freezing point is shown to agree remarkably well with the prediction of the vibrational model of thermal transport in dense fluids.

Hidden scale invariance in the Gay-Berne model

This paper presents a numerical study of the Gay-Berne liquid crystal model with parameters corresponding to calamitic (rod-shaped) molecules. The focus is on the isotropic and nematic phases at temperatures above unity, where we find strong correlations between the virial and potential-energy thermal fluctuations, reflecting the hidden scale invariance symmetry. This implies the existence of isomorphs, which are curves in the thermodynamic phase diagram of approximately invariant physics. We study numerically one isomorph in the isotropic phase and one in the nematic phase. In both cases, good invariance of the dynamics is demonstrated via data for the mean-square displacement and the reduced-unit time-autocorrelation functions of the velocity, angular velocity, force, torque, and first- and second-order Legendre polynomial orientational order parameters. Deviations from isomorph invariance are observed at short times for the orientational time-autocorrelation functions, which reflects the fact that the moment of inertia is assumed to be constant and thus not isomorph-invariant in reduced units. Structural isomorph invariance is demonstrated from data for the radial distribution functions of the molecules and their orientations. For comparison, all quantities were also simulated along an isochore of similar temperature variation, in which case invariance is not observed. We conclude that the thermodynamic phase diagram of the calamitic Gay-Berne model is essentially one-dimensional in the studied regions as predicted by isomorph theory, a fact that potentially allows for simplifications of future theories and numerical studies.

Gas–liquid crossover in the Lennard-Jones system

It is demonstrated that the crossover between gas- and liquid-like regions on the phase diagram of the Lennard-Jones system occurs at a fixed value of the density divided by its value at the freezing point, ρ/ ρfr ≃ 0.35. This definition is consistent with other definitions proposed recently. As a result, a very simple practical expression for the gas-to-liquid crossover line emerges.

Bridge functions of classical one-component plasmas

In a recent paper, Lucco Castello et al. [arXiv:2107.03537] performed systematic extractions of classical one-component plasma bridge functions from molecular dynamics simulations and provided an accurate parametrization that was incorporated in their isomorph-based empirically modified hypernetted chain approach for Yukawa one-component plasmas. Here the extraction technique and parametrization strategy are described in detail, while the deficiencies of earlier efforts are discussed. The structural and thermodynamic predictions of the updated version of the integral equation theory approach are compared with extensive available simulation results revealing a truly unprecedented level of accuracy in the entire dense liquid region of the Yukawa phase diagram.

Generalized hydrodynamics of the Lennard-Jones liquid in view of hidden scale invariance

In recent years lines along which structure and dynamics are invariant to a good approximation, so-called isomorphs, have been identified in the thermodynamic phase diagrams of several model liquids and solids. This paper reports computer simulation data of the transverse and longitudinal collective dynamics at different length scales along an isomorph of the Lennard-Jones system. Our findings are compared to corresponding results along an isotherm and an isochore. Confirming the theoretical prediction, the reduced-unit dynamics of the transverse momentum density is invariant to a good approximation along the isomorph on all time and length scales. Likewise, the wave-vector dependent shear-stress autocorrelation function is found to be isomorph invariant (with minor deviations at very short times). A similar invariance is not seen along the isotherm or the isochore. Using a spatially nonlocal hydrodynamic model for the transverse momentum-density time-autocorrelation function, the macroscopic shear viscosity and its wave dependence are determined, demonstrating that the shear viscosity is isomorphic invariant on all length scales studied. This analysis implies the existence of a length scale that is isomorph invariant in reduced units, i.e., which characterizes each isomorph. The transverse sound-wave velocity, the Maxwell relaxation time, and the rigidity shear modulus are also isomorph invariant. In contrast to the isomorph invariance of all aspects of the transverse dynamics, the reduced-unit dynamics of the mass density is not invariant on length scales longer than the interparticle distance. By fitting to a generalized hydrodynamic model, we extract values for the wave-vector-dependent thermal diffusion coefficient, sound attenuation coefficient, and adiabatic sound velocity. The isomorph variation of these quantities in reduced units on long length scales can be eliminated by scaling with the density-scaling exponent, a fundamental quantity in the isomorph theory framework; this is an empirical observation that remains to be explained theoretically.

Application of cell models to the melting and sublimation lines of the Lennard-Jones and related potential systems

Harmonic cell models (HCMs) are shown to predict the melting line of the Lennard-Jones (LJ) but not the sublimation line. In addition, even for the melting line, the HCMs are found to be physically unrealistic for inverse power potential systems near the hard-sphere limit, and for the Weeks-Chandler-Andersen system at extremely low temperatures. Despite this, the HCM accurately predicts the LJ mean-square displacement (MSD) from molecular-dynamics (MD) simulations along both lines after simple scaling corrections, to include the effects of anharmonicity and correlated dynamics of the atoms, are applied. Single caged atom molecular dynamics and Monte Carlo simulations provide further quantitative characterization of these additional effects, which go beyond harmonicity. The melting indicator and a modification of the cell model in a similar form are shown to be approximately constant along the melting line, which indicates an isomorph. The less well studied LJ sublimation line is shown not to be an isomorph, yet it still can be represented analytically very accurately by the relationship k_{B}T=aρ^{4}+bρ^{2}, where a and b are constants (k_{B} is Boltzmann's constant, T is the temperature, and ρ is the number density). This relationship has been found previously for the melting line, but the two constants have opposite signs for the sublimation and melting lines. This simple formula is also predicted using a nonharmonic static lattice expression for the pressure. The probability distribution function of the melting factor indicates departures from harmonic or Gaussian behavior in the lower wing. Nevertheless, the mean melting factor is shown to follow a simple MSD Debye-Waller factor dependence along both the melting and sublimation lines. This work combining HCM and MD simulations provides a comparison of the melting and sublimation lines of the LJ system, which could provide the foundations for a more unified statistical mechanical description of these two solid boundary lines.

Isomorph Invariance of Higher-Order Structural Measures in Four Lennard-Jones Systems

In the condensed liquid phase, both single- and multicomponent Lennard-Jones (LJ) systems obey the "hidden-scale-invariance" symmetry to a good approximation. Defining an isomorph as a line of constant excess entropy in the thermodynamic phase diagram, the consequent approximate isomorph invariance of structure and dynamics in appropriate units is well documented. However, although all measures of the structure are predicted to be isomorph invariant, with few exceptions only the radial distribution function (RDF) has been investigated. This paper studies the variation along isomorphs of the nearest-neighbor geometry quantified by the occurrence of Voronoi structures, Frank-Kasper bonds, icosahedral local order, and bond-orientational order. Data are presented for the standard LJ system and for three binary LJ mixtures (Kob-Andersen, Wahnström, NiY2). We find that, while the nearest-neighbor geometry generally varies significantly throughout the phase diagram, good invariance is observed along the isomorphs. We conclude that higher-order structural correlations are no less isomorph invariant than is the RDF.

Structure of the Lennard-Jones liquid estimated from a single simulation

Combining the recent Piskulich-Thompson approach [Z. A. Piskulich and W. H. Thompson, J. Chem. Phys. 152, 011102 (2020)JCPSA60021-960610.1063/1.5135932] with isomorph theory, from a single simulation the structure of a single-component Lennard-Jones (LJ) system is obtained at an arbitrary state point in almost the whole liquid region of the temperature-density phase diagram. The LJ system exhibits two temperature ranges where the van't Hoff assumption that energetic and entropic forces are temperature independent is valid to a good approximation. A method to evaluate the structure at an arbitrary state point along an isochore from the knowledge of structures at two temperatures on the isochore is also discussed. We argue that, in general, the structure of any hidden scale-invariant system obeying the van't Hoff assumption in the whole range of temperatures can be determined in the whole liquid region of the phase diagram from a single simulation.

Isomorph theory beyond thermal equilibrium

This paper generalizes isomorph theory to systems that are not in thermal equilibrium. The systems are assumed to be R-simple, i.e., to have a potential energy that as a function of all particle coordinates R obeys the hidden-scale-invariance condition U(R_a) < U(R_b) ⇒ U(λR_a) < U(λR_b). "Systemic isomorphs" are introduced as lines of constant excess entropy in the phase diagram defined by density and systemic temperature, which is the temperature of the equilibrium state point with the average potential energy equal to U(R). The dynamics is invariant along a systemic isomorph if there is a constant ratio between the systemic and the bath temperature. In thermal equilibrium, the systemic temperature is equal to the bath temperature and the original isomorph formalism is recovered. The new approach rationalizes within a consistent framework previously published observations of isomorph invariance in simulations involving nonlinear steady-state shear flows, zero-temperature plastic flows, and glass-state isomorphs. This paper relates briefly to granular media, physical aging, and active matter. Finally, we discuss the possibility that the energy unit defining the reduced quantities should be based on the systemic rather than the bath temperature.

Sound Velocities of Lennard-Jones Systems Near the Liquid-Solid Phase Transition

Longitudinal and transverse sound velocities of Lennard-Jones systems are calculated at the liquid-solid coexistence using the additivity principle. The results are shown to agree well with the "exact" values obtained from their relations to excess energy and pressure. Some consequences, in particular in the context of the Lindemann's melting rule and Stokes-Einstein relation between the self-diffusion and viscosity coefficients, are discussed. Comparison with available experimental data on the sound velocities of solid argon at melting conditions is provided.

Density fluctuations and random walks in an overdamped and supercooled simple liquid

In this work, the short-time dynamics of simple liquid is explored both analytically and numerically with the focus on the interplay between the density fluctuations in a volume surrounding a chosen particle and its random walk motion. The particles interact via the Lennard-Jones potential with parameters corresponding to liquid argon. For large times, analytical calculations based on the fluctuation theory provides an explicit expression reproducing isothermal change of the self-diffusion coefficient in liquid argon corresponding to the experimental data. These results lead to the conclusion that such behavior is based on the reduced mobility of particles reflected in their density fluctuations that can be equivalently achieved in the cases of either low temperatures and pressures (supercooling) or moderate temperatures and high pressures (overdamping).

Revisiting the Stokes-Einstein relation without a hydrodynamic diameter

We present diffusion coefficient and shear viscosity data for the Lennard-Jones fluid along nine isochores above the critical density, each involving a temperature variation of roughly two orders of magnitude. The data are analyzed with respect to the Stokes-Einstein (SE) relation, which breaks down gradually at high temperatures. This is rationalized in terms of the fact that the reduced diffusion coefficient D ̃ and the reduced viscosity η ̃ are both constant along the system's lines of constant excess entropy (the isomorphs). As a consequence, D ̃ η ̃ is a function of T/T _Ref(ρ) in which T is the temperature, ρ is the density, and T _Ref(ρ) is the temperature as a function of the density along a reference isomorph. This allows one to successfully predict the viscosity from the diffusion coefficient in the studied region of the thermodynamic phase diagram.

Perspective: Excess-entropy scaling

This article gives an overview of excess-entropy scaling, the 1977 discovery by Rosenfeld that entropy determines properties of liquids like viscosity, diffusion constant, and heat conductivity. We give examples from computer simulations confirming this intriguing connection between dynamics and thermodynamics, counterexamples, and experimental validations. Recent uses in application-related contexts are reviewed, and theories proposed for the origin of excess-entropy scaling are briefly summarized. It is shown that if two thermodynamic state points of a liquid have the same microscopic dynamics, they must have the same excess entropy. In this case, the potential-energy function exhibits a symmetry termed hidden scale invariance, stating that the ordering of the potential energies of configurations is maintained if these are scaled uniformly to a different density. This property leads to the isomorph theory, which provides a general framework for excess-entropy scaling and illuminates, in particular, why this does not apply rigorously and universally. It remains an open question whether all aspects of excess-entropy scaling and related regularities reflect hidden scale invariance in one form or other.

Liquid state isomorphism, Rosenfeld-Tarazona temperature scaling, and Riemannian thermodynamic geometry

Aspects of isomorph theory, Rosenfeld-Tarazona temperature scaling, and thermodynamic geometry are comparatively discussed on the basis of the Lennard-Jones potential. The first two approaches approximate the high-density fluid state well when the repulsive interparticle interactions become dominant, which is typically the case close to the freezing line. However, previous studies of Rosenfeld-Tarazona scaling for the isochoric heat capacity and its relation to isomorph theory reveal deviations for the temperature dependence. It turns out that a definition of a state region in which repulsive interactions dominate is required for achieving consistent results. The Riemannian thermodynamic scalar curvature R allows for such a classification, indicating predominantly repulsive interactions by R>0. An analysis of the isomorphic character of the freezing line and the validity of Rosenfeld-Tarazona temperature scaling show that these approaches are consistent only in a small state region.

Communication: Simple liquids' high-density viscosity

This paper argues that the viscosity of simple fluids at densities above that of the triple point is a specific function of temperature relative to the freezing temperature at the density in question. The proposed viscosity expression, which is arrived at in part by reference to the isomorph theory of systems with hidden scale invariance, describes computer simulations of the Lennard-Jones system as well as argon and methane experimental data and simulation results for an effective-pair-potential model of liquid sodium.

Communication: Glass transition and melting lines of an ionic liquid

The phase diagram of the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesufonyl)imide, [Pyrr_1,4][NTf₂], was explored by synchroton X-ray diffraction and Raman scattering measurements as a function of temperature and pressure. Glass transition T_g(p) and melting T_m(p) temperatures were obtained from atmospheric pressure up to ca. 2.0 GPa. We found that both the T_g(p) and T_m(p) curves follow essentially the same pressure dependence. The similarity of pressure coefficients, dT_g/dp ≈ dT_m/dp, is explained within the non-equilibrium thermodynamics approach for the glass transition by assuming that one of the Ehrenfest equations is appropriated for T_g(p), whereas T_m(p) follows the Clausius-Clapeyron equation valid for the first-order transitions. The results highlight that ionic liquids are excellent model systems to address fundamental questions related to the glass transition.

Isomorph theory of physical aging

This paper derives and discusses the configuration-space Langevin equation describing a physically aging R-simple system and the corresponding Smoluchowski equation. Externally controlled thermodynamic variables like temperature, density, and pressure enter the description via the single parameter T_s/T, in which T is the bath temperature and T_s is the "systemic" temperature defined at any time t as the thermodynamic equilibrium temperature of the state point with density ρ(t) and potential energy U(t). In equilibrium, T_s ≅ T with fluctuations that vanish in the thermodynamic limit. In contrast to Tool's fictive temperature and other effective temperatures in glass science, the systemic temperature is defined for any configuration with a well-defined density, even if it is not close to equilibrium. Density and systemic temperature define an aging phase diagram, in which the aging system traces out a curve. Predictions are discussed for aging following various density-temperature and pressure-temperature jumps from one equilibrium state to another, as well as for a few other scenarios. The proposed theory implies that R-simple glass-forming liquids are characterized by the dynamic Prigogine-Defay ratio being equal to unity.

Pair Potential That Reproduces the Shape of Isochrones in Molecular Liquids

Many liquids have curves (isomorphs) in their phase diagrams along which structure, dynamics, and some thermodynamic quantities are invariant in reduced units. A substantial part of their phase diagrams is thus effectively one dimensional. The shapes of these isomorphs are described by a material-dependent function of density, h(ρ), which for real liquids is well approximated by a power law, ρ(γ). However, in simulations, a power law is not adequate when density changes are large; typical models, such as Lennard-Jones liquids, show that γ(ρ) ≡ d ln h(ρ)/d ln ρ is a decreasing function of density. This article presents results from computer simulations using a new pair potential that diverges at a nonzero distance and can be tuned to give a more realistic shape of γ(ρ). Our results indicate that the finite size of molecules is an important factor to take into account when modeling liquids over a large density range.

Thermodynamics of freezing and melting

Although the freezing of liquids and melting of crystals are fundamental for many areas of the sciences, even simple properties like the temperature–pressure relation along the melting line cannot be predicted today. Here we present a theory in which properties of the coexisting crystal and liquid phases at a single thermodynamic state point provide the basis for calculating the pressure, density and entropy of fusion as functions of temperature along the melting line, as well as the variation along this line of the reduced crystalline vibrational mean-square displacement (the Lindemann ratio), and the liquid's diffusion constant and viscosity. The framework developed, which applies for the sizable class of systems characterized by hidden scale invariance, is validated by computer simulations of the standard 12-6 Lennard-Jones system.

Melting is a classic first-order phase transition, but an accurate thermodynamic description is still lacking. Here, Pedersen et al. develop a theory, validated by simulations of the Lennard-Jones system, for the melting thermodynamics applicable to all systems characterized by hidden scale invariance.