Recent Progress of Transition Metal Selenides for Electrochemical Oxygen Reduction to Hydrogen Peroxide: From Catalyst Design to Electrolyzers Application

Hydrogen peroxide (H2O2) is a highly value-added and environmental-friendly chemical with various applications. The production of H2O2 by electrocatalytic 2e- oxygen reduction reaction (ORR) has emerged as a promising alternative to the energy-intensive anthraquinone process. High selectivity Catalysts combining with superior activity are critical for the efficient electrosynthesis of H2O2. Earth-abundant transition metal selenides (TMSs) being discovered as a classic of stable, low-cost, highly active and selective catalysts for electrochemical 2e- ORR. These features come from the relatively large atomic radius of selenium element, the metal-like properties and the abundant reserves. Moreover, compared with the advanced noble metal or single-atom catalysts, the kinetic current density of TMSs for H2O2 generation is higher in acidic solution, which enable them to become suitable catalyst candidates. Herein, the recent progress of TMSs for ORR to H2O2 is systematically reviewed. The effects of TMSs electrocatalysts on the activity, selectivity and stability of ORR to H2O2 are summarized. It is intended to provide an insight from catalyst design and corresponding reaction mechanisms to the device setup, and to discuss the relationship between structure and activity.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

The quantum confinement effects on the electronic properties of monolayer GeS nanoribbon with tube-edged reconstruction

Monolayer α-phase GeS is promising for many novel applications due to its high carrier mobility and suitable bandgap. Recently, the metal and nonmetal zigzag edges of monolayer α-phase GeS have been predicted to undergo universal ZZ(Ge-Tube)/ZZ(S-R) edge reconstruction. Therefore, studies on GeSNR should be reconsidered. In this paper, we study the quantum confinement effects on the electronic properties of edge reconstructed monolayer GeS nanoribbon by using first-principles calculations. As width of the nanoribbon increases from 10 Å to 41 Å, the band gap keeps indirect and linearly decreases from 1.57 eV to 0.87 eV. Robust spatial separation of valence band maximum and conduction band minimum exist in reconstructed GeS nanoribbon with width larger than 19 Å. Moreover, high carrier mobility is expected in the reconstructed GeS nanoribbon. Our results suggest that reconstructed GeS nanoribbon is an important candidate for optoelectronics and photocatalytic.

Pressure induced structural phase crossover of a GaSe epilayer grown under screw dislocation driven mode and its phase recovery

Hydrostatically pressurized studies using diamond anvil cells on the structural phase transition of the free-standing screw-dislocation-driven (SDD) GaSe thin film synthesized by molecular beam epitaxy have been demonstrated via in-situ angle-dispersive synchrotron X-ray diffraction and Raman spectroscopy. The early pressure-driven hexagonal-to-rock salt transition at approximately ~ 20 GPa as well as the outstandingly structural-phase memory after depressurization in the SDD-GaSe film was recognized, attributed to the screw dislocation-assisted mechanism. Note that, the reversible pressure-induced structural transition was not evidenced from the GaSe bulk, which has a layer-by-layer stacking structure. In addition, a remarkable 1.7 times higher in bulk modulus of the SDD-GaSe film in comparison to bulk counterpart was observed, which was mainly contributed by its four times higher in the incompressibility along c-axis. This is well-correlated to the slower shifting slopes of out-of-plane phonon-vibration modes in the SDD-GaSe film, especially at low-pressure range (< 5 GPa). As a final point, we recommend that the intense density of screw dislocation cores in the SDD-GaSe lattice structure plays a crucial role in these novel phenomena.

Chemical reactions on surfaces for applications in catalysis, gas sensing, adsorption-assisted desalination and Li-ion batteries: opportunities and challenges for surface science

The study of chemical processes on solid surfaces is a powerful tool to discover novel physicochemical concepts with direct implications for processes based on chemical reactions at surfaces, largely exploited by industry. Recent upgrades of experimental tools and computational capabilities, as well as the advent of two-dimensional materials, have opened new opportunities and challenges for surface science. In this Perspective, we highlight recent advances in application fields strictly connected to novel concepts emerging in surface science. Specifically, we show for selected case-study examples that surface oxidation can be unexpectedly beneficial for improving the efficiency in electrocatalysis (the hydrogen evolution reaction and oxygen evolution reaction) and photocatalysis, as well as in gas sensing. Moreover, we discuss the adsorption-assisted mechanism in membrane distillation for seawater desalination, as well as the use of surface-science tools in the study of Li-ion batteries. In all these applications, surface-science methodologies (both experimental and theoretical) have unveiled new physicochemical processes, whose efficiency can be further tuned by controlling surface phenomena, thus paving the way for a new era for the investigation of surfaces and interfaces of nanomaterials. In addition, we discuss the role of surface scientists in contemporary condensed matter physics, taking as case-study examples specific controversial debates concerning unexpected phenomena emerging in nanosheets of layered materials, solved by adopting a surface-science approach.

Deposition of MoSe2 flakes using cyclic selenides

The currently limited portfolio of volatile organoselenium compounds used for atomic layer deposition (ALD) has been extended by designing and preparing a series of four-, five- and six-membered cyclic silylselenides. Their fundamental properties were tailored by alternating the ring size, the number of embedded Se atoms and the used peripheral alkyl chains. In contrast to former preparations based on formation of sodium or lithium selenides, the newly developed synthetic method utilizes a direct and easy reaction of elemental selenium with chlorosilanes. Novel 2,2,4,4-tetraisopropyl-1,3,2,4-diselenadisiletane, which features good trade-off between chemical/thermal stability and reactivity, has been successfully used for gas-to-solid phase reaction with MoCl₅ affording MoSe₂. A thorough characterization of the as-deposited 2D MoSe₂ flakes revealed its out-of-plane orientation and high purity. Hence, the developed four-membered cyclic silylselenide turned out to be well-suited Se-precursor for ALD of MoSe₂.

Diselenadisiletanes possess easy preparation, tailored stability, reactivity, volatility and fast exchange ALD reaction to afford MoSe₂ flakes of high quality.

Liquid-Phase Exfoliated GeSe Nanoflakes for Photoelectrochemical-Type Photodetectors and Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) systems represent powerful tools to convert electromagnetic radiation into chemical fuels and electricity. In this context, two-dimensional (2D) materials are attracting enormous interest as potential advanced photo(electro)catalysts and, recently, 2D group-IVA metal monochalcogenides have been theoretically predicted to be water splitting photocatalysts. In this work, we use density functional theory calculations to theoretically investigate the photocatalytic activity of single-/few-layer GeSe nanoflakes for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in pH conditions ranging from 0 to 14. Our simulations show that GeSe nanoflakes with different thickness can be mixed in the form of nanoporous films to act as nanoscale tandem systems, in which the flakes, depending on their thickness, can operate as HER- and/or OER photocatalysts. On the basis of theoretical predictions, we report the first experimental characterization of the photo(electro)catalytic activity of single-/few-layer GeSe flakes in different aqueous media, ranging from acidic to alkaline solutions: 0.5 M H2SO4 (pH 0.3), 1 M KCl (pH 6.5), and 1 M KOH (pH 14). The films of the GeSe nanoflakes are fabricated by spray coating GeSe nanoflakes dispersion in 2-propanol obtained through liquid-phase exfoliation of synthesized orthorhombic (Pnma) GeSe bulk crystals. The PEC properties of the GeSe nanoflakes are used to design PEC-type photodetectors, reaching a responsivity of up to 0.32 AW-1 (external quantum efficiency of 86.3%) under 455 nm excitation wavelength in acidic electrolyte. The obtained performances are superior to those of several self-powered and low-voltage solution-processed photodetectors, approaching that of self-powered commercial UV-Vis photodetectors. The obtained results inspire the use of 2D GeSe in proof-of-concept water photoelectrolysis cells.

Bifunctional catalytic activity of Zn1-xFexO toward the OER/ORR: seeking an optimal stoichiometry

Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1-xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm-2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec-1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (0001[combining macron]) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm-2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.

Advancing Applications of Black Phosphorus and BP-Analog Materials in Photo/Electrocatalysis through Structure Engineering and Surface Modulation

Black phosphorus (BP), an emerging 2D material semiconductor material, exhibits unique properties and promising application prospects for photo/electrocatalysis. However, the applications of BP in photo/electrocatalysis are hampered by the instability as well as low catalysis efficiency. Recently, tremendous efforts have been dedicated toward modulating its intrinsic structure, electronic property, and charge separation for enhanced photo/electrocatalytic performance through structure engineering. Simultaneously, the search for new substitute materials that are BP-analogous is ongoing. Herein, the latest theoretical and experimental progress made in the structural/surface engineering strategies and advanced applications of BP and BP-analog materials in relation to photo/electrocatalysis are extensively explored, and a presentation of the future opportunities and challenges of the materials is included at the end.

Functional 2D Germanene Fluorescent Coating of Microrobots for Micromachines Multiplexing

Micromachines are at the forefront of materials research as they are self-propelled, smart autonomous systems capable of acting as an intelligent matter. One of the obstacles the field faces is tracking individual micromachines carrying molecular cargo from the rest of the micromachines. Highly stable fluorescent markers based on chemically modified 2D germanene compounds are developed. Two different 2D germanene derivatives, 4-fluorophenylgermanane (2D-Ph-Ge) and methylgermanane (2D-Me-Ge), exhibit different fluorescence under UV light irradiation (excitation at 365 nm), which allows one particular micromotor to be easily distinguished in a mixture of micromotors. This offers a paradigm shift toward a new approach of multiplex detection of self-propelled micromachines. The utility is demonstrated on a drug delivery system, where micromachines carrying a drug are labeled with 2D-Ph-Ge with blue emission while bare micromachines are labeled by 2D-Me-Ge with red emission. This approach of functional fluorescent labeling will pave the way to multiple simultaneous functionalized micromachines identification in complex environments.

Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction

Flexible plastic packaging waste causes serious environmental issues due to challenges in recycling. This study investigated the conversion of flexible plastic packaging waste with 11.8 and 27.5 wt.% polyethylene terephthalate (PET) (denoted as PET-12 and PET-28, respectively) into oil and multi-walled carbon nanotubes (MWCNTs). The mixtures were initially pyrolyzed and the produced volatiles were processed over 9.0 wt.% Fe₂O₃ supported on ZSM-5 (400 °C) to remove oxygenated hydrocarbons (catalytic cracking of terephthalic and benzoic acids) that deteriorate oil quality. The contents of oxygenated hydrocarbons were decreased in oil from 4.6 and 9.4 wt.% per mass of PET-12 and PET-28, respectively, to undetectable levels. After catalytic cracking, the oil samples had similar contents of gasoline, diesel and heavy oil/wax fractions. The non-condensable gas was converted into MWCNTs over 0.9 wt.% Ni supported on CaCO₃ (700 °C). The type of plastic packaging influenced the yields (2.4 and 1.5 wt.% per mass of PET-12 and PET-28, respectively) and the properties of MWCNTs due to the differences in gas composition. Regarding the electrocatalytic application, both MWCNTs from PET-12 and PET-28 outperformed commercial MWCNTs and Pt-based electrodes during oxygen evolution reaction, suggesting that MWCNTs from flexible plastic packaging can potentially replace conventional electrode materials.

Tuning the Catalytic Property of Phosphorene for Oxygen Evolution and Reduction Reactions by Changing Oxidation Degree

The development of inexpensive metal-free catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is highly desirable for fuel cells and rechargeable metal-air batteries. Black phosphorus (BP), as a new kind of two-dimensional (2D) layer material, has recently shown excellent OER electrocatalytic activity. However, atomistic understanding of the catalytic mechanism is lacking. Here, on the basis of ab initio calculations, we find that pristine phosphorene shows poor ORR/OER performances. However, oxidation can effectively tune the adsorption strength of reactive intermediates and thus change its OER/ORR electrocatalytic performance. For OER, the higher the local oxidation degree ( D_local^O) of phosphorene, the better the OER activity. Therefore, the oxidized phosphorene site with highest D_local^O shows the best OER catalytic property. In contrast, there exists an optimum D_local^O for ORR. These findings provide new insights for better understanding and improving the catalytic performances of BP-based electrocatalysts and could stimulate more theoretical and experimental studies in this area.

Layered transition metal dichalcogenide electrochemistry: journey across the periodic table

Studies on layered transition metal dichalcogenides (TMDs), in particular for Group VIB TMDs like MoS2 and WS2, have long reached a crescendo in the realms of electrochemical applications initiated by their remarkable catalytic and electronic properties. One area that garnered considerable attention is the fervent pursuit of layered TMDs as electrocatalysts for hydrogen evolution reaction (HER), driven by global efforts towards reducing carbon footprint and attaining hydrogen economy. This Tutorial Review captures the essence of electrochemistry of different classes of layered TMDs and metal chalcogenides across the period table and showcases their tuneable electrochemical and HER catalytic attributes that are governed by the elemental composition, structure and anisotropy. Of interest to the assiduously studied Group VIB TMDs, we describe the role of elemental constituents and material purity in aspects of surface composition and structure, on their electrochemistry. Across families of layered TMDs in the periodic table, we highlight the apparent trends in their electrochemical and electrocatalytic properties through diligent comparison. Inevitably, these trends vary according to the type of chalcogen or transition metal that constitutes the eventual TMD. Beyond layered TMDs, we discuss the electrochemistry and recent progress in HER electrocatalysis of other layered metal chalcogenides that are overshadowed by the success of Group VIB TMDs. At the pinnacle of the emergent applications of layered TMDs, it is prudent to demystify the intrinsic electrochemical behaviour that originates from the participation of the elemental constitution of transition metal or chalcogen. Moreover, knowledge of the catalytic and electronic properties of the various TMD families and emerging trends across the period or down the group is of paramount importance when introducing or refining their prospective uses. The annotations in this Tutorial Review are envisioned to promote discourse into the catalytic and electrochemical trends of TMDs that is currently absent.

Liquid-Phase Exfoliated Indium-Selenide Flakes and Their Application in Hydrogen Evolution Reaction

Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of β-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g L^-1 . Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. It is demonstrated that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few micrometers, and thicknesses ranging from 1 to 20 nm, with a maximum population centered at ≈5 nm, corresponding to 4 Se-In-In-Se quaternary layers. It is also shown that no formation of further InSe-based compounds (such as In₂ Se₃ ) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for the hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. The dependence of the InSe flakes' morphologies, i.e., surface area and thickness, on the HER performances is highlighted, achieving the best efficiencies with small flakes offering predominant edge effects. The theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes.

Movement of new direction from conjugated polymer to semiconductor composite polymer nanofiber

In the past few years, there was a tremendous growth in conjugated polymer nanofibers via design of novel conjugated polymers with inorganic materials. Synthetic routes to these conjugated polymers involve new, mild polymerization techniques, which enable the formation of well-defined polymer architectures. This review provides interest in the development of novel (semi) conducting polymers, which combine both organic and inorganic blocks in one framework. Due to their ability to act as chemosensors or to detect various chemical species in environmental and biological systems, fluorescent conjugated polymers have gained great interest. Nanofibers of metal oxides and sulfides are particularly interesting in both their way of applications and fundamental research. These conjugated nanofibers operated for many applications in organic electronics, optoelectronics, and sensors. Synthesis of electrospun fibers by electrospinning technique discussed in this review is a simple method that forms conjugated polymer nanofibers. This review provides the basics of the technique and its recent advances in the formation of highly conducting and high-mobility polymer fibers towards their adoption in electronic application.

The effect of varying solvents for MoS2 treatment on its catalytic efficiencies for HER and ORR

MoS₂ has been investigated intensively in the field of catalysis for the hydrogen evolution reaction (HER) in particular. Much effort has been made by various research teams worldwide to look into the specific catalyst design such as nano-structuring, defect engineering or hybrid structures. But what evades us is the fundamental preparation method for the dispersion of powdered MoS₂. Individual research teams with their best practices might be subjective and not validated by extensive experimental results. In this report, we find that the overpotential for the catalysis of HER varies from 0.57 to 0.72 V (freshly prepared) when different dispersion media are used, such as acetonitrile, N,N-dimethylformamide, ethanol, methanol and water. In terms of oxygen reduction reaction (ORR) catalysis, less significant differences were found. With both HER and ORR pertinent to the fuel cell industry, this report would serve as an insight to readers when comparing the results of MoS₂ catalysis across the literature from different research groups when different solvents were used as the dispersion medium.

Oxidation Resistance of Monolayer Group-IV Monochalcogenides

Ridged, orthorhombic two-dimensional (2D) group-V elemental and group IV-VI compound analogues of phosphorene provide a versatile platform for nanoelectronics, optoelectronics, and clean energy. However, phosphorene is vulnerable to oxygen in ambient air, which is a major obstacle for its applications. Regarding this issue, here we explore the oxidation behavior of monolayer group-IV monochalcogenides (GeS, GeSe, SnS, and SnSe), in comparison to that of phosphorene and arsenene by first-principles calculations. We find superior oxidation resistance of the monolayer group-IV monochalcogenides, with activation energies for the chemisorption of O₂ on the 2D sheets in the range of 1.26-1.60 eV, about twice of the values of phosphorene and arsenene. The distinct oxidation behaviors of monolayer group-IV monochalcogenides and group-V phosphorene analogues originate from their different bond natures. Moreover, the chemisorption of a moderate amount of oxygen atoms does not severely deteriorate the electronic band structures of the monolayer group-IV monochalcogenides. These results shine light on the utilization of the monolayer group-IV monochalcogenides for next-generation 2D electronics and optoelectronics with high performance and stability.

Experimental and theoretical investigations on the defect and optical properties of S- and Al-doped GaSe crystals

A combination of experimental and computational methods was performed to investigate the defect and optical properties of S-doped and Al-doped GaSe crystals.

Termination of Ge surfaces with ultrathin GeS and GeS2 layers via solid-state sulfurization

Thermally activated solid-state reactions of germanium with sulfur give rise to passivating germanium sulfide surface layers.

Coupling Ag-doping and rich oxygen vacancies in mesoporous NiCoO nanorods supported on nickel foam for highly efficient oxygen evolution

Ag-doped mesoporous NiCoO nanorods as efficient and stable electrocatalysts for oxygen evolution reaction have been synthesized with desirable conductivity, high surface area and rich oxygen vacancies.