Specific ion modulated thermoresponse of poly(N-isopropylacrylamide) brushes

Responsive nanocellulose-PNIPAM millicapsules

HYPOTHESIS

Milli- and micro-capsules are developed to facilitate the controlled release of diverse active ingredients by passive diffusion or a triggered burst. As applications expand, capsules are required to be increasingly multi-functional, combining benefits like encapsulation, response, release, and even movement. Balancing the increasingly complex demands of capsules is a desire to minimize material usage, requiring efficient structural and chemical design. Designing multifunctional capsules with complex deformation should be possible even after minimizing the material usage through use of sparse fiber networks if the fibers are coated with responsive polymers.

EXPERIMENTS

Here capsules are created with a shell made from a mesh of nanoscale bacterial cellulose fibers that provide mechanical strength at very low mass levels, while a coating of thermoresponsive Poly(N-isopropylacrylamide), PNIPAM, on the fibers provides control of permeability, elastic response, and temperature response. These properties are varied by grafting different amounts of polymer using particular reaction conditions.

FINDINGS

The addition of PNIPAM to the cellulose mesh capsule enhances its mechanical properties, enabling it to undergo large deformations and recover once stress is removed. The increased elastic response of the capsule also provides reinforcement against drying-induced capillary stresses, limiting the degree of shrinkage during dehydration. Time-lapse microscopy demonstrates thermoreversible swelling of the capsules in response to temperature change. Cycles of swelling and shrinkage drive solvent convection to and from the capsule interior, allowing exchange of contents and mixing with the bulk fluid on a time scale of seconds. Because the cellulose capsules are produced via emulsion-templated fermentation, the polymer-modified biocapsule concept introduced here presents a pathway toward the sustainable and scalable manufacture of multifunctional responsive capsules.

Illuminating the nanostructure of diffuse interfaces: Recent advances and future directions in reflectometry techniques

Diffuse soft matter interfaces take many forms, from end-tethered polymer brushes or adsorbed surfactants to self-assembled layers of lipids. These interfaces play crucial roles across a multitude of fields, including materials science, biophysics, and nanotechnology. Understanding the nanostructure and properties of these interfaces is fundamental for optimising their performance and designing novel functional materials. In recent years, reflectometry techniques, in particular neutron reflectometry, have emerged as powerful tools for elucidating the intricate nanostructure of soft matter interfaces with remarkable precision and depth. This review provides an overview of selected recent developments in reflectometry and their applications for illuminating the nanostructure of diffuse interfaces. We explore various principles and methods of neutron and X-ray reflectometry, as well as ellipsometry, and discuss advances in their experimental setups and data analysis approaches. Improvements to experimental neutron reflectometry methods have enabled greater time resolution in kinetic measurements and elucidation of diffuse structure under shear or confinement, while innovation in analysis protocols has significantly reduced data processing times, facilitated co-refinement of reflectometry data from multiple instruments and provided greater-than-ever confidence in proposed structural models. Furthermore, we highlight some significant research findings enabled by these techniques, revealing the organisation, dynamics, and interfacial phenomena at the nanoscale. We also discuss future directions and potential advancements in reflectometry techniques. By shedding light on the nanostructure of diffuse interfaces, reflectometry techniques enable the rational design and tailoring of interfaces with enhanced properties and functionalities.

Droplet Bottom Expansion and Its Wettability Control Mechanism Based on Macroscopic Defects

Biomimetic surfaces with special wettability have received much attention due to their promising prospects in droplet manipulation. Although some progress has been made, the manipulation of droplets by macroscopic defects of the millimeter structure and the wetting-state transition mechanism have rarely been reported. Herein, inspired by lotus leaves and desert beetles, biomimetic surfaces with macroscopic defects are prepared by laser processing and chemical modification. Various functions of droplet manipulation are achieved by controlling the millimeter-scale macroscopic defects, such as droplet capture, motion trajectory changing, and liquid well. And a droplet bottom expansion phenomenon is proposed: wetting-state transition in superhydrophobic regions around defects. The "edge failure effect" is proposed to explain the force analysis of droplet capture and the droplet bottom expansion to distinguish it from the adhesion phenomenon presented by the droplet sliding. 53.28° is defined as the expanded saturated angle of the as-prepared surface, which is used to distinguish whether the defect could cause the droplet bottom expansion. An enhanced edge failure effect experiment is designed to make the droplet bottom expansion more intuitive. This work provides a mechanistic explanation of the surfaces that utilize macroscopic defects for droplet manipulation. It can be applied to the monitoring of droplet storage limits, providing a perspective on the design and optimization of superhydrophobic surfaces with droplet manipulation.

Lead (II) ions enable the ion-specific effects of monovalent anions on the molecular structure and interactions at silica/aqueous interfaces

HYPOTHESIS

The adsorption of heavy metal ions such as Pb(II) onto negatively charged minerals such as silica is expected to alter the structure and the interactions at the silica/aqueous interfaces. Besides the solution pH, the inner-sphere sorption of Pb(II) is expected to regulate the surface charge/potential, hypothesized to control the actions of monovalent anions in the aqueous environment. These complex pictures can be probed directly using surface-sensitive sum-frequency generation (SFG) spectroscopy.

EXPERIMENTS

The pH-dependent water structure within the double layer at silica/aqueous interfaces under the influence of different ions was examined using SFG. The recorded SFG spectra were deconvoluted into the Stern layer (SL) and diffuse layer (DL) using the maximum entropy method in conjunction with the electrical double-layer theory.

FINDINGS

Standalone monovalent sodium salts do not exhibit ion-specific effects on the silica/aqueous interfaces. However, the mixture of Pb(II) species and each of these salts display profound ion-specific effects on the structure of silica/aqueous interfaces, indicating the role of Pb(II) as an enabler of the ion-specificity of the investigated monovalent anions. The interesting effect arises from a complex interplay between the physical processes (i.e., electrostatic interactions, screening effects, etc.) and chemical processes such as the hydrolysis of Pb(II) ions, ion complexation, protonation and deprotonation of the surface silanol group.

Comparing polymer-surfactant complexes to polyelectrolytes

HYPOTHESIS

Understanding the complex interactions between polymers and surfactants is required to optimise commercially relevant systems such as paint, toothpaste and detergent. Neutral polymers complex with surfactants, forming 'pearl necklace' structures that are often conceptualised as pseudo-polyelectrolytes. Here we pose two questions to test the limits of this analogy: Firstly, in the presence of salt, do these polymer-surfactant systems behave like polyelectrolytes? Secondly, do polymer-surfactant complexes resist geometric confinement like polyelectrolytes?

EXPERIMENTS

We test the limits of the pseudo-polyelectrolyte analogy through studying a poly(N-isopropylacrylamide) (PNIPAM) brush in the presence of sodium dodecylsulfate (SDS). Brushes are ideal for interrogating pseudo-polyelectrolytes, as neutral and polyelectrolyte brushes exhibit distinct and well understood behaviours. Spectroscopic ellipsometry, quartz crystal microbalance with dissipation monitoring (QCM-D), and neutron reflectometry (NR) were used to monitor the behaviour and structure of the PNIPAM-SDS system as a function of NaCl concentration. The ability of the PNIPAM-SDS complex to resist geometric confinement was probed with NR.

FINDINGS

At a fixed SDS concentration below the zero-salt CMC, increasing NaCl concentration <100 mM promoted brush swelling due to an increase in osmotic pressure, not dissimilar to a weak polyelectrolyte. At these salt concentrations, the swelling of the brush could be described by a single parameter: the effective CMC. However, at high NaCl concentrations (e.g., 500 mM) no brush collapse was observed at all (non-zero) concentrations of SDS studied, contrary to what is seen for many polyelectrolytes. Study of the polymer-surfactant system under confinement revealed that the physical volume of surfactant dominates the structure of the strongly confined system, which further differentiates it from the polyelectrolyte case.

Solvent-Modulated Specific Ion Effects: Poly(N-isopropylacrylamide) Brushes in Nonaqueous Electrolytes

Pertinent to cryopreservation as well as energy storage and batteries, nonaqueous electrolytes and their mixtures with water were investigated. In particular, specific ion-induced effects on the modulation of a poly(N-isopropylacrylamide) (PNIPAM) brush were investigated in various dimethyl sulfoxide (DMSO)-water solvent mixtures. Spectroscopic ellipsometry and neutron reflectometry were employed to probe changes in brush swelling and structure, respectively. In water-rich solvents (i.e., pure water and 6 mol % DMSO), PNIPAM undergoes a swollen to collapsed thermotransition with increasing temperature, whereby a forward Hofmeister series was noted; K+ and Li+ electrolytes composed of SCN- and I- salted-in (stabilized) PNIPAM chains, and electrolytes of Cl- and Br- salted-out (destabilized) the polymer. The cation was seen to play a lesser role than that of the anion, merely modulating the magnitude of the anion effect. In 70 mol % DMSO, a collapsed to swollen thermotransition was noted for PNIPAM. Here, concentration-dependent specific ion effects were observed; a forward series was observed in 0.2 mol % electrolytes, whereas increasing the electrolyte concentration to 0.9 mol % led to a series reversal. While no thermotransition was observed in pure DMSO, a solvent-induced specific ion series reversal was noted; SCN- destabilized the brush and Cl- stabilized the brush. Both series reversals are attributed to the delicate balance of interactions between the solvent, solute (ion), and substrate (brush). Namely, the stability of the solvent clusters was hypothesized to drive polymer solvation.

Hofmeister effects influence bulk nanostructure in a protic ionic liquid

HYPOTHESIS

The origins and behaviour of specific ion effects have been studied in water for more than a century, and more recently in nonaqueous molecular solvents. However, the impacts of specific ion effects on more complex solvents such as nanostructured ionic liquids remains unclear. Here, we hypothesise that the influence of dissolved ions on the hydrogen bonding in the nanostructured ionic liquid propylammonium nitrate (PAN) constitutes a specific ion effect.

EXPERIMENTS

We performed molecular dynamics simulations of bulk PAN and 1-50 mol% PAN-PAX (X = halide anions F^-, Cl^-, Br^-, I^-) and PAN-YNO₃ (Y = alkali metal cations, Li⁺, Na⁺, K⁺ and Rb⁺) solutions to investigate how monovalent salts influence the bulk nanostructure in PAN.

FINDINGS

The key structural characteristic in PAN is a well-defined hydrogen bond network formed within the polar and non-polar domains in its nanostructure. We show that dissolved alkali metal cations and halide anions have significant and unique influences on the strength of this network. Cations (Li⁺, Na⁺, K⁺ and Rb⁺) consistently promote hydrogen bonding in the PAN polar domain. Conversely, the influence of halide anions (F^-, Cl^-, Br^-, I^-) is ion specific; while F^- disrupts PAN hydrogen bonding, I^- promotes it. The manipulation of PAN hydrogen bonding therefore constitutes a specific ion effect - i.e. a physicochemical phenomena caused by the presence of dissolved ions, which are dependent on these ions' identity. We analyse these results using a recently proposed predictor of specific ion effects developed for molecular solvents, and show that it is also capable of rationalising specific ion effects in the more complex solvent environment of an ionic liquid.

From Hofmeister to hydrotrope: Effect of anion hydrocarbon chain length on a polymer brush

HYPOTHESIS

Specific ion effects govern myriad biological phenomena, including protein-ligand interactions and enzyme activity. Despite recent advances, detailed understanding of the role of ion hydrophobicity in specific ion effects, and the intersection with hydrotropic effects, remains elusive. Short chain fatty acid sodium salts are simple amphiphiles which play an integral role in our gastrointestinal health. We hypothesise that increasing a fatty acid's hydrophobicity will manifest stronger salting-out behaviour.

EXPERIMENTS

Here we study the effect of these amphiphiles on an exemplar thermoresponsive polymer brush system, conserving the carboxylate anion identity while varying anion hydrophobicity via the carbon chain length. Ellipsometry and quartz crystal microbalance with dissipation monitoring were used to characterise the thermoresponse and viscoelasticity of the brush, respectively, whilst neutron reflectometry was used to reveal the internal structure of the brush. Diffusion-ordered nuclear magnetic resonance spectroscopy and computational investigations provide insight into polymer-ion interactions.

FINDINGS

Surface sensitive techniques unveiled a non-monotonic trend in salting-out ability with increasing anion hydrophobicity, revealing the bundle-like morphology of the ion-collapsed system. An intersection between ion-specific and hydrotropic effects was observed both experimentally and computationally; trending from good anti-hydrotrope towards hydrotropic behaviour with increasing anion hydrophobicity, accompanying a change in hydrophobic hydration.

Real-Time Ellipsometry at High and Low Temperatures

Among the many available real-time characterization methods, ellipsometry stands out with the combination of high sensitivity and high speed as well as nondestructive, spectroscopic, and complex modeling capabilities. The thicknesses of thin films such as the complex dielectric function can be determined simultaneously with precisions down to sub-nanometer and 10^-4, respectively. Consequently, the first applications of high- and low-temperature real-time ellipsometry have been related to the monitoring of layer growth and the determination of optical properties of metals, semiconductors, and superconductors, dating back to the late 1960s. Ellipsometry has been ever since a steady alternative of nonpolarimetric spectroscopies in applications where quantitative information (e.g., thickness, crystallinity, porosity, band gap, absorption) is to be determined in complex layered structures. In this article the main applications and fields of research are reviewed.

Cosolvent effects on the structure and thermoresponse of a polymer brush: PNIPAM in DMSO–water mixtures

Structural characterisation of thermoresponsive polymer brushes in binary DMSO–water mixtures reveals both LCST and UCST behaviour.

Understanding specific ion effects and the Hofmeister series

Specific ion effects (SIE), encompassing the Hofmeister Series, have been known for more than 130 years since Hofmeister and Lewith's foundational work. SIEs are ubiquitous and are observed across the medical, biological, chemical and industrial sciences. Nevertheless, no general predictive theory has yet been able to explain ion specificity across these fields; it remains impossible to predict when, how, and to what magnitude, a SIE will be observed. In part, this is due to the complexity of real systems in which ions, counterions, solvents and cosolutes all play varying roles, which give rise to anomalies and reversals in anticipated SIEs. Herein we review the historical explanations for SIE in water and the key ion properties that have been attributed to them. Systems where the Hofmeister series is perturbed or reversed are explored, as is the behaviour of ions at the liquid-vapour interface. We discuss SIEs in mixed electrolytes, nonaqueous solvents, and in highly concentrated electrolyte solutions - exciting frontiers in this field with particular relevance to biological and electrochemical applications. We conclude the perspective by summarising the challenges and opportunities facing this SIE research that highlight potential pathways towards a general predictive theory of SIE.

Quantifying the robustness of the neutron reflectometry technique for structural characterization of polymer brushes

Neutron reflectometry is the foremost technique for in situ determination of the volume fraction profiles of polymer brushes at planar interfaces. However, the subtle features in the reflectometry data produced by these diffuse interfaces challenge data interpretation. Historically, data analyses have used least-squares approaches that do not adequately quantify the uncertainty of the modeled profile and ignore the possibility of other structures that also match the collected data (multimodality). Here, a Bayesian statistical approach is used that permits the structural uncertainty and multimodality to be quantified for polymer brush systems. A free-form model is used to describe the volume fraction profile, minimizing assumptions regarding brush structure, while only allowing physically reasonable profiles to be produced. The model allows the total volume of polymer and the profile monotonicity to be constrained. The rigor of the approach is demonstrated via a round-trip analysis of a simulated system, before it is applied to real data examining the well characterized collapse of a thermoresponsive brush. It is shown that, while failure to constrain the interfacial volume and consider multimodality may result in erroneous structures being derived, carefully constraining the model allows for robust determination of polymer brush compositional profiles. This work highlights that an appropriate combination of flexibility and constraint must be used with polymer brush systems to ensure the veracity of the analysis. The code used in this analysis is provided, enabling the reproduction of the results and the application of the method to similar problems.

Hygroscopicity of Hofmeister Salts and Glycine Aerosols-Salt Specific Interactions

The Hofmeister effect of inorganic ions to precipitate proteins has been used to understand the coagulation phenomenon in colloid and protein science. Herein, for the first time, this effect is studied on the hygroscopicity of aerosols using ATR-FTIR spectroscopy. The representative Hofmeister salts (MgSO₄, KCl, NH₄NO₃) and amino acid (glycine) with different amino acid/salt molar ratios (ASRs) are mixed and atomized into micrometer-sized particles. For mixed kosmotrope (MgSO₄)/glycine and chaotrope (NH₄NO₃)/glycine with an ASR of 1:1, both ERHs (efflorescence relative humidities) and DRHs (deliquescence relative humidities) are absent. However, for the mixtures of glycine and neutral salt (KCl), no DRH is observed while 66.2 and 61.4% ERH of glycine is detected for mixtures with ASRs of 1:1 and 1:3, respectively, which is similar to pure glycine. For the mixture of NH₄NO₃/glycine with an ASR of 1:3, ERH and DRH are found to be 15.4 and 32.2% RH, less than that of pure NH₄NO₃. Further, interactions between glycine-salt and/or water is also studied in the mixtures during hydration and dehydration. Water-mediated ion-glycine interaction is detected based on the two glycine bands merging into one band. Glycine-SO₄^2- interaction is present for glycine/sulfate in all ASRs, while glycine-NO₃^- interaction is only seen for 1:3 glycine/NH₄NO₃ mixtures during hydration. This work opens a window to understand the Hofmeister effect on the hygroscopicity of atmospheric aerosols.

Fast and Large Shrinking of Thermoresponsive Hydrogels with Phase-Separated Structures

Thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels have been attracting attention in a variety of functional materials, such as biomaterials, because they exhibit a volume phase transition phenomenon near physiological temperatures. However, the slow kinetics and small volume shrinkage of bulk PNIPAAm hydrogels upon heating greatly limit their practical application. Here, we report PNIPAAm hydrogels with phase-separated structures that exhibited ultrafast shrinking upon heating. The phase separation into a PNIPAAm-rich phase and a water-rich phase was formed through aqueous polymerization in the presence of NaClO₄ salt. Through structural analysis of the hydrogels, a topologically heterogeneous and porous structure was observed, which was highly dependent on the NaClO₄ concentration in the polymerization step. Compared to conventional PNIPAAm hydrogels, the phase-separated hydrogels exhibited much faster and larger shrinkage upon heating. Simultaneously, the hydrogels quickly released a large amount of water owing to the effective water channels inside them. The present method can be widely applied to general hydrogels, and it can address the numerous limitations of hydrogels in terms of operating programmability and deformation efficiency.

Competitive specific ion effects in mixed salt solutions on a thermoresponsive polymer brush

HYPOTHESIS

Grafted poly(ethylene glycol) methyl ether methacrylate (POEGMA) copolymer brushes change conformation in response to temperature ('thermoresponse'). In the presence of different ions the thermoresponse of these coatings is dramatically altered. These effects are complex and poorly understood with no all-inclusive predictive theory of specific ion effects. As natural environments are composed of mixed electrolytes, it is imperative we understand the interplay of different ions for future applications. We hypothesise anion mixtures from the same end of the Hofmeister series (same-type anions) will exhibit non-additive and competitive behaviour.

EXPERIMENTS

The behaviour of POEGMA brushes, synthesised via surface-initiated ARGET-ATRP, in both single and mixed aqueous electrolyte solutions was characterised with ellipsometry and neutron reflectometry as a function of temperature.

FINDINGS

In mixed fluoride and chloride aqueous electrolytes (salting-out ions), or mixed thiocyanate and iodide aqueous electrolytes (salting-in ions), a non-monotonic concentration-dependent influence of the two anions on the thermoresponse of the brush was observed. A new term, δ, has been defined to quantitively describe synergistic or antagonistic behaviour. This study determined the specific ion effects imparted by salting-out ions are dependent on available solvent molecules, whereas the influence of salting-in ions is dependent on the interactions of the anions and polymer chains.

Dynamic mechanism of halide salts on the phase transition of protein models, poly(N-isopropylacrylamide) and poly(N,N-diethylacrylamide)

The effects of salts on protein systems are not yet fully understood. We investigated the ionic dynamics of three halide salts (NaI, NaBr, and NaCl) with two protein models, namely poly(N-isopropylacrylamide) (PNIPAM) and poly(N,N-diethylacrylamide) (PDEA), using multinuclear NMR, dispersion corrected density functional theory (DFT-D) calculations and dynamic light scattering (DLS) methods. The variation in ionic line-widths and chemical shifts induced by the polymers clearly illustrates that anions rather than cations interact directly with the polymers. From the variable temperature measurements of the NMR transverse relaxation rates of anions, which characterize the polymer-anion interaction intensities, the evolution behaviors of Cl^-/Br^-/I^- during phase transitions are similar in each polymer system but differ between the two polymer systems. The NMR transverse relaxation rates of anions change synchronously with the phase transition of PNIPAM upon heating, but they drop rapidly and vanish about 3-4.5 °C before the phase transition of PDEA. By combining the DFT-D and DLS data, the relaxation results imply that anions escape from the interacting sites with PDEA prior to full polymer dehydration or collapse, which can be attributed to the lack of anion-NH interactions. The different dynamic evolutions of the anions in the PNIPAM and PDEA systems give us an important clue for understanding the micro-mechanism of protein folding in a complex salt aqueous solvent.

Two-Stage Collapse of PNIPAM Brushes: Viscoelastic Changes Revealed by an Interferometric Laser Technique

Many temperature-responsive polymers exhibit a single-phase transition at the lower critical solution temperature (LCST). One exception is poly(N-isopropylacryamide) (PNIPAM). PNIPAM brush layers (51 ± 3 nm thick) that are end-grafted onto glass beads collapse in two stages. The viscoelastic changes of a PNIPAM brush layers were investigated with an interferometric laser method at different temperatures. This method is able to measure the two-stage collapse of beads coated with a polymer brush layer. When these beads are situated close to a hydrophilic glass surface, they exhibit Brownian motion. As this Brownian motion changes with temperature, the collapse of the polymer layer is revealed. The characteristic spectrum of the Brownian motion of beads is modeled by a damped harmonic oscillator, where the polymer layer acts as both spring and damping elements. The change of the Brownian motion spectrum with temperature indicates two transitions of the PNIPAM brush layer, one at 36 °C and one at 46 °C. We attribute the first transition to the LCST volume collapse of PNIPAM. Here, changes of the density and viscosity of the brush dominate. The second transition is dominated by a stiffening of the brush layer.

Crack growth-driven wettability transition on carbon black/polybutadiene nanocomposite coatings via stretching

Ordered topography patterns with a mechanical response are usually designed to achieve wettability switching by geometric parameter changes through mechanical stimuli. However, their fabrication often needs expensive and complicated micro/nano-fabrication processing (e.g. photolithography and ion etching). In this study, a nano-carbon black (CB)/polybutadiene (PB) coating with a Wenzel superhydrophobic state was prepared on a rubber substrate by a facile method combining solution mixing and spraying coating. By stretching the composite coating, the generated cracks divided the continuous coating into new micro-nano mastoids, resulting in the formation of new hierarchical roughness for Cassie superhydrophobicity. The Wenzel-to-Cassie transition behavior was dependent on the CB loading in the coating. During stretching, the cracks propagated more rapidly in the coating with higher CB loading and induced the desired hierarchical structure to consequently enable the Wenzel-to-Cassie transition earlier at a lower stretching strain. The stretched coating presented good anti-wetting (a sliding angle of 5°) and low water adhesion. After releasing, the coating returned to its original Wenzel state by structure recovery. Thus, the switchable wettability of the coating can be adopted for no-loss water droplet transfer by controlling the droplet adhesion through cyclic stretching-releasing, and exhibits good potential for microfluidic and biomedical applications.

Poly(N-isopropylacrylamide) Response to Salt Concentration and Anion Identity: A Brush-on-Brush Study

The stability of poly(N-isopropylacrylamide) (PNIPAM) brush-modified colloidal silica particles was compared to asymmetric and symmetric PNIPAM brush direct force measurements in the presence of 1, 10, and 500 mM aqueous salt solution of KCl, KNO₃, and KSCN between 10 and 45 °C. Dynamic light scattering measurements highlighted subtle variations in the salt-mediated thermoresponse, while atomic force microscopy (AFM) force curves between a bare silica or PNIPAM brush-modified colloid probe and a planar PNIPAM brush elucidated differences in brush interactions. The AFM force curves in the presence of KCl primarily revealed steric interactions between the surfaces, while KNO₃ and KSCN solutions exhibited electrosteric interactions on approach as a function of the chaotropic nature of the ion and the solution concentration. The symmetric PNIPAM brush interaction highlighted significant variations between KCl and KSCN at 1 and 500 mM concentrations, while the approach and retraction force curves were relatively similar at 10 mM concentration. The combination of these techniques enabled the stability of PNIPAM brush-modified colloidal dispersions in the presence of electrolyte to be better understood with specific ion binding and the solution Debye length playing a significant role.

Anion Specificity Effects on the Interfacial Aggregation Behavior of Poly(lauryl acrylate)-block-poly(N-isopropylacrylamide)

Aggregation behavior of an amphiphilic diblock copolymer poly(lauryl acrylate)-block-poly(N-isopropylacrylamide) (PLA-b-PNIPAM) on neutral aqueous subphases with different salt species and salt concentrations, as well as the structures of its Langmuir-Blodgett (LB) films, were systematically studied. The presence of NaCl or Na₂SO₄ in subphases makes PNIPAM chains shrink on the water surface and reduce their solubility underwater. On the contrary, the presence of NaNO₃ or NaSCN makes PNIPAM chains more stretched on water and increase their solubility underwater, whose stretch degree and solubility both increase with the increase of salt concentration. Solubility of PNIPAM chains in the above subphase solutions is ranked as NaSCN ≫ NaNO₃ > pure H₂O > NaCl ≈ Na₂SO₄, which is almost consistent with the Hofmeister series except for the latter two close cases. All the initial LB films of PLA-b-PNIPAM exhibit tiny isolated circular micelles. Upon compression, the LB films in the case of pure H₂O exhibit the dense mixed structures of circular micelles and wormlike aggregates. The formation of wormlike aggregates is due to connection of some adjoining cores, which is less possible in other subphase cases because of the conformation difference of PNIPAM chains.

The Hofmeister series: Specific ion effects in aqueous polymer solutions

Specific ion effects in aqueous polymer solutions have been under active investigation over the past few decades. The current state-of-the-art research is primarily focused on the understanding of the mechanisms through which ions interact with macromolecules and affect their solution stability. Hence, we herein first present the current opinion on the sources of ion-specific effects and review the relevant studies. This includes a summary of the molecular mechanisms through which ions can interact with polymers, quantification of the affinity of ions for the polymer surface, a thermodynamic description of the effects of salts on polymer stability, as well as a discussion on the different forces that contribute to ion-polymer interplay. Finally, we also highlight future research issues that call for further scrutiny. These include fundamental questions on the mechanisms of ion-specific effects and their correlation with polymer properties as well as a discussion on the specific ion effects in more complex systems such as mixed electrolyte solutions.

Tuning the Properties of Charged Polymers at the Solid/Liquid Interface with Ions

In conventional theories, where ions are treated as point charges, the properties of charged polymers can be tuned using ions via the ionic strength. However, this article will show that the properties of charged polymers at the solid/liquid interface, including charged polymer brushes and polyelectrolyte multilayers, can be tuned by ions beyond ionic strength effects. Ion specificity, multivalency, ionic hydrogen bonding, and ionic hydrophobicity/hydrophilicity are used to tune a range of properties of charged polymers at the solid/liquid interface such as hydration, conformation, stiffness, surface wettability, lubricity, adhesion, and protein adsorption. The ionic effects demonstrated here greatly broaden our understanding of the use of ions to tune the interfacial properties of charged polymers. It is anticipated that these ionic effects can be further expanded by incorporating new types of important ion-charged polymer interactions and can also be extended to neutral polymer systems.

Fabrication of Phosphate-Imprinted PNIPAM/SiO₂ Hybrid Particles and Their Phosphate Binding Property

A SiO₂ microsphere imprinted by phosphate ions was prepared with the use of phosphate ion as the template molecule and tetraethoxysilane as the precursor. Thereafter, the imprinted SiO₂ microspheres were modified with 3-(trimethoxysilyl)propyl methacrylate (TMSPMA@SiO₂), followed by introducing the double bond. In the presence of TMSPMA@SiO₂, using N-isopropylacrylamide as monomer, and potassium persulfate as initiator, polymer/inorganic hybrid particles (PNIPAM/SiO₂) were prepared. Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption-desorption test, and transmission electron microscope were employed for the characterization of molecular imprinted SiO₂ microspheres and PNIPAM/SiO₂ hybrid particles. The effects of phosphate concentration, pH value, and adsorption temperature on the phosphate binding properties of PNIPAM/SiO₂ hybrid particles were studied by UV-vis spectrophotometer. The experimental results shed light on the fact that the PNIPAM structure is beneficial for the improvement of the adsorption ability of phosphate-imprinted SiO₂ microspheres. With the increase in the initial phosphate concentration, the adsorption capacity of hybrid particles to phosphate ions increased to 274 mg/g at pH = 7 and 15 °C. The acid condition and the temperature below the low critical solution temperature (LCST) of PNIPAM are favorable to the adsorption of phosphate ions by PNIPAM/SiO₂ hybrid particles, and the maximum adsorption capacity can reach 287 mg/g (at pH = 5 and 15 °C). The phosphate imprinted polymer/inorganic hybrid material is expected to be put to use in the fields of phosphate ions adsorption, separation, and recovery.

Temperature dependent specific ion effects in mixed salt environments on a thermoresponsive poly(oligoethylene glycol methacrylate) brush

The temperature induced swelling/collapse transition of poly(oligoethylene glycol methacrylate) (POEGMA) brushes has been investigated in electrolyte solutions comprised of multiple anions.

Influence of molecular weight on PNIPAM brush modified colloidal silica particles

The effect of molecular weight and temperature on the phase transition and internal structure of poly(N-isopropylacrylamide) brush modified colloidal silica particles was investigated using dynamic light scattering (DLS) and small angle neutron scattering (SANS) between 15 and 45 °C. Dry particle analysis utilising transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) all confirmed the thickness of the polymer brush shell increased as a function of polymerisation time. Hydrodynamic diameter and electrophoretic mobility results revealed that the brush modified particles transitioned from swollen shells to a collapsed conformation between 15 and 35 °C. The dispersions were electrosterically stabilised over the entire temperature range investigated, with minimal thermal hysteresis recorded. Modelling of the hydrodynamic diameter enabled the calculation of a lower critical solution temperature (LCST) which increased as a function of brush thickness. The internal structure determined via SANS showed a swollen brush at low temperatures (18 and 25 °C) which decayed radially away from the substrate, while a collapsed block-like conformation with 60% polymer volume fraction was present at 40 °C. Radial phase separation was evident at intermediate temperatures (30 and 32.5 °C) with the lower molecular weight sample having a greater volume fraction of polymer in the dense inner region at these temperatures.

Anion Specificity in Dimethyl Sulfoxide-Water Mixtures Exemplified by a Thermosensitive Polymer

In the present work, we have investigated the anion-specific upper critical solution temperature (UCST) behavior of polymer-supported borinic acid (PBA) in dimethyl sulfoxide-water (DMSO-H₂O) mixtures. An inverted V-shaped series CH₃COO^- < Cl^- < salt-free > NO₃^- > ClO₄^- > SCN^- is observed in terms of the anion-specific UCST of PBA in the DMSO-H₂O mixtures. Both direct anion-polymer interactions and indirect solvent-mediated anion-polymer interactions are involved in the specific anion effect on the UCST behavior of PBA. The direct binding of anions to the PBA surface generates a salting-in effect on PBA, causing the UCST for the different types of anions to increase from chaotropic to kosmotropic anions due to the stronger binding of the more chaotropic anions. On the other hand, the indirect anionic polarization of hydrogen bonding between PBA and DMSO molecules also produces a salting-in effect on PBA, leading the UCST for the different types of anions to increase from kosmotropic to chaotropic anions because of the stronger capability of the more kosmotropic anions to polarize the hydrogen bonding. Thus, the dominating anion-PBA interactions change from the direct anion binding to the indirect anionic polarization of hydrogen bonding as the anions change from chaotropes to kosmotropes. The observed inverted V-shaped series suggests that the specific anion effect on the UCST behavior of PBA in the DMSO-H₂O mixtures is determined by the combined effects of the binding of anions to the PBA surface and the anionic polarization of hydrogen bonding between PBA and DMSO molecules.

A biomimetic surface with switchable contact angle and adhesion for transfer and storage of microdroplets

Recently, superhydrophobic surfaces with switchable wettability have attracted much attention. The ability to control the contact angle and adhesion of the multifunctional smart surface will be more beneficial to meet the complex practical applications, but until now this has been a challenge. Inspired by rose petals, we report a smart, biomimetic, and superhydrophobic surface whose wettability can switch reversibly between superhydrophobicity and superhydrophilicity on the Cu substance. At the same time, we can control the adhesion on the as-prepared superhydrophobic surface by covering and removing the ink. Thus, the as-prepared surface can be used as a medium for microdroplet transfer and storage. Compared with the original Cu substrate, electrochemical measurements show that the corrosion inhibition of the superhydrophobic surface is significantly improved. Good corrosion resistance allows the platform to be used to manipulate or store more types of microdroplets, especially corrosive microdroplets. In addition, the as-prepared surface has a good stability which facilitates the practical application of the as-prepared smart surface. This work provides a smart and effective strategy for lossless transfer and patterned storage of microdroplets. It is also promising for the design of new smart interface materials such as for biological cell manipulation, chemical microreaction and other types of microfluidic devices.

Salt Sensitivity of the Thermoresponsive Behavior of PNIPAAm Brushes

We report investigations on the salt sensitivity of the thermoresponsive behavior of PNIPAAm brushes applying the quartz crystal microbalance coupled with spectroscopic ellipsometry technique. This approach enables a detailed study of the optical and mechanical behavior of the polymer coatings. Additional conclusions can be drawn from the difference between both techniques due to a difference in the contrast mechanism of both methods. A linear shift of the phase-transition temperature to lower temperatures with the addition of sodium chloride was found, similar to the behavior of free polymer chains in solution. The thermal hysteresis was found to be decreased by the addition of sodium chloride to the solution, hinting to the interaction of the ions with the amide groups of the polymer, whereby the formation of hydrogen bonds is hindered. The results of this study are of relevance to the application of PNIPAAm brushes in biological fluids and demonstrate the additional potential of the ion sensitivity besides the better known thermosensitivity.

Effect of ionic strength and salt identity on poly(N-isopropylacrylamide) brush modified colloidal silica particles

HYPOTHESIS

The thermoresponse of poly(N-isopropylacrylamide) stabilised particles is influenced by the presence of salt and is dependent on the concentration, and ions present. The conformation and electrophoretic mobility of core/shell PNIPAM brush modified silica particles is expected to vary as a function of these specific ion effects.

EXPERIMENTS

The thermoresponse of PNIPAM brush modified silica particles was investigated via dynamic light scattering and electrophoretic mobility measurements between 5 and 45 °C in the presence of 11 different salt solutions.

FINDINGS

Specific ion effects were observed in the presence of salt solutions for concentrations between 50 and 1000 mM. The temperature response could be mapped to a master curve unlike PNIPAM brush behaviour on planar substrates. The magnitude of brush layer lower critical solution temperature reduction was found to follow the order F^- > CH₃CO₂^- > Cl^- > NO₃^- ∼ Br^- > I^- > SCN^- for the potassium series and Na⁺ > K⁺ > Cs⁺ > Li⁺ ∼ NH₄⁺ for the chloride salts. The electrophoretic mobility of the modified particles in the presence of 100 mM potassium salts increased in magnitude as the brush layer collapsed and also with the chaotropic nature of the anion.

Enhanced Optical Sensitivity in Thermoresponsive Photonic Crystal Hydrogels by Operating Near the Phase Transition

Photonic crystal hydrogels composed of analyte-responsive hydrogels and crystalline colloidal arrays have immense potential as reagentless chemical and biological sensors. In this work, we investigated a general mechanism to rationally tune the sensitivity of photonic crystal hydrogels consisting of stimuli-responsive polymers to small molecule analytes. This mechanism was based on modulating the demixing temperature of such hydrogels relative to the characterization temperature to in effect maximize the extent of phase separation behavior; thus, the volume changes in response to the target analytes. Using ethanol as a model analyte, we demonstrated that this mechanism led to a dramatic increase in the sensitivity of optically diffracting poly(N-isopropylacrylamide) (pNIPAM) hydrogel films that exhibit a lower critical solution temperature (LCST) behavior. The demixing temperature of the pNIPAM films was modulated by copolymerization of the films with relatively hydrophobic and hydrophilic comonomers, as well as by varying the ionic strength of the characterization solution. Our results showed that copolymerization of the films with 2.5 mol % of N-tert-butylacrylamide, which is hydrophobic relative to pNIPAM, enabled the detection limit of the pNIPAM films to ethanol to be lowered ∼2-fold at 30 °C. Additionally, increasing the ionic strength of the characterization solution above 200 mM resulted in a dramatic increase in the extent of contraction of the films in the presence of ethanol. Ultimately, it was demonstrated that as little as 16 g/L or 2 vol % of ethanol in water could reliably be detected, and that the sensitivity of the films to ethanol was predictably greatest when operating near the phase transition, such that even small additions of the analyte induced the start of demixing and the collapse of the hydrogel. Such a mechanism may be extended to photonic crystal hydrogel sensors prepared from other stimuli-responsive polymers and more broadly exploited to enhance the utility of these sensors for a broad range of analytes.

Hofmeister Effect on PNIPAM in Bulk and at an Interface: Surface Partitioning of Weakly Hydrated Anions

The effect of sodium fluoride, sodium trichloroacetate, and sodium thiocyanate on the stability and conformation of poly(N-isopropylacrylamide), in bulk solution and at the gold-aqueous interface, is investigated by differential scanning calorimetry, dynamic light scattering, quartz crystal microbalance, and atomic force microscopy. The results indicate a surface partitioning of the weakly hydrated anions, i.e., thiocyanate and trichloroacetate, and the findings are discussed in terms of anion-induced electrostatic stabilization. Although attractive polymer-ion interactions are suggested for thiocyanate and trichloroacetate, a salting-out effect is found for sodium trichloroacetate. This apparent contradiction is explained by a combination of previously suggested mechanisms for the salting-out effect by weakly hydrated anions.

Tacticity-Dependent Interchain Interactions of Poly(N-Isopropylacrylamide) in Water: Toward the Molecular Dynamics Simulation of a Thermoresponsive Microgel

The discovery that the lower critical solution temperature (LCST) of poly(N-Isopropylacrylamide) (PNIPAM) in water is affected by the tacticity opens the perspective to tune the volume phase transition temperature of PNIPAM microgels by changing the content of meso dyads in the polymer network. The increased hydrophobicity of isotactic-rich PNIPAM originates from self-assembly processes in aqueous solutions also below the LCST. The present work aims to detect the characteristics of the pair interaction between polymer chains, occurring in a concentration regime close to the chain overlap concentration, by comparing atactic and isotactic-rich PNIPAM solutions. Using atomistic molecular dynamics simulations, we successfully modelled the increased association ability of the meso-dyad-rich polymer in water below the LCST, and gain information on the features of the interchain junctions as a function of tacticity. Simulations carried out above the LCST display the PNIPAM transition to the insoluble state and do not detect a relevant influence of stereochemistry on the structure of the polymer ensemble. The results obtained at 323 K provide an estimate of the swelling ratio of non-stereocontrolled PNIPAM microgels which is in agreement with experimental findings for microgels prepared with low cross-linker/monomer feed ratios. This study represents the first step toward the atomistic modelling of PNIPAM microgels with a controlled tacticity.

On the formation of inclusion complexes at the solid/liquid interface of anchored temperature-responsive PNIPAAM diblock copolymers with γ-cyclodextrin

The thermal responsive behavior of adsorbed layers of diblock copolymers of poly(N-isopropylacrylamide) (PNIPAAM) and poly((3-acrylamidopropyl)trimethylammonium chloride) (PAMPTMA(+)) with γ-cyclodextrin (γ-CD) at the solid/liquid interface has been investigated using three in situ techniques: null ellipsometry, quartz-crystal microbalance with dissipation monitoring, and neutron reflectometry. The measurements provided information about the adsorbed amounts, the layer thickness, hydration and viscoelastic properties, and the interfacial structure and composition. The copolymers adsorb to silica with the cationic PAMPTMA(+) blocks sitting as anchors in a flat conformation and the PNIPAAM chains extending into the solution. The copolymer system alone exhibits reversible collapse above the lower critical solution temperature of PNIPAAM. The addition of γ-CD to pre-adsorbed copolymer layers results in a highly extended conformation as well as some loss of copolymer from the surface, which we discuss in terms of the formation of surface-invoked lateral steric repulsion of formed inclusion complexes.

Conformational collapse of spherical poly(N-isopropylacrylamide) brushes under the constraint of bound micelles

In this paper, we investigate the micelle (charge)-constrained collapse of a spherical poly(N-isopropylacrylamide) (PNIPAM) brush.

Ion specificities of artificial macromolecules

Artificial macromolecules are well-defined synthetic polymers, with a relatively simple structure as compared to naturally occurring macromolecules. This review focuses on the ion specificities of artifical macromolecules. Ion specificities are influenced by solvent-mediated indirect ion-macromolecule interactions and also by direct ion-macromolecule interactions. In aqueous solutions, the role of water-mediated indirect ion-macromolecule interactions will be discussed. The addition of organic solvents to aqueous solutions significantly changes the ion specificities due to the formation of water-organic solvent complexes. For direct ion-macromolecule interactions, we will discuss specific ion-pairing interactions for charged macromolecules and specific ion-neutral site interactions for uncharged macromolecules. When the medium conditions change from dilute solutions to crowded environments, the ion specificities can be modified by either the volume exclusion effect, the variation of dielectric constant, or the interactions between ions, macromolecules, and crowding agents.