Design of Self-Supported Flexible Nanostars MFe-LDH@ Carbon Xerogel-Modified Electrode for Methanol Oxidation

Layered double hydroxides (LDHs) have emerged as promising electrodes materials for the methanol oxidation reaction. Here, we report on the preparation of different LDHs with the hydrothermal process. The effect of the divalent cation (i.e., Ni, Co, and Zn) on the electrochemical performance of methanol oxidation was investigated. Moreover, nanocomposites of LDHs and carbon xerogels (CX) supported on nickel foam (NF) substrate were prepared to investigate the role of carbon xerogel. The results show that NiFe-LDH/CX/NF is an efficient electrocatalyst for methanol oxidation with a current density that reaches 400 mA·m-2 compared to 250 and 90 mA·cm-2 for NiFe-LDH/NF and NF, respectively. In addition, all LDH/CX/NF nanocomposites show excellent stability for methanol oxidation. A clear relationship is observed between the electrodes crystallite size and their activity to methanol oxidation. The smaller the crystallite size, the higher the current density delivered. Additionally, the presence of carbon xerogel in the nanocomposites offer 3D interconnected micro/mesopores, which facilitate both mass and electron transport.

A review of confined-structure catalysts in the catalytic oxidation of VOCs: synthesis, characterization, and applications

This picture depicts the process of the catalytic oxidation of VOCs on confined-structure catalysts, which possess excellent activity and can effectively protect the active phase from aggregation and poisoning.

Layered double hydroxides are still out in the bloom: Syntheses, applications and advantages of three-dimensional flower-like structures

Layered double hydroxides (LDHs) have received great attention for years in numerous fields. Controlled and flexible layer composition, as well as the vast assortment of possible anionic guests, and easy adaptability for multipurpose applications, have been some of the many reasons behind their extraordinary success. However, versatility does not only involve the composition or the dimensions of the crystals but also their morphology. Aside from conventional hexagonal, flat structures, three-dimensional assemblies have been reported with architectures closely resembling those of flowers. The possibility of interconnecting the LDH nanosheets in rosette-like geometries has arisen the interest in finding new ways to control, modulate, and guide the particle growth obtaining hierarchical structures to be adapted to specific targets. This review is focused on describing the different strategies implemented to build flower-like assemblies, and on investigating their applications, looking for specific advantages of the use of a three-dimensional architecture over a bi-dimensional one.

Synthesis of a Crystalline and Transparent Aerogel Composed of Ni-Al Layered Double Hydroxide Nanoparticles through Crystallization from Amorphous Hydrogel

Enormous efforts have been devoted to the development of crystalline aerogels toward heterogeneous catalysis, energy storage, ion/molecular absorption, and luminescence. However, properties of aerogels are not fully exploited due to their low content of functional moieties embedded in their solid networks, low crystallinity, and limited chemical compositions. Herein, we develop a one-pot approach based on crystallization from amorphous metal hydroxides modified with a β-diketone ligand, toward crystalline transition-metal hydroxide aerogels. Synthesis of monolithic and crystalline aerogels of layered double hydroxide (LDH) was performed in a Ni-Al system starting from aqueous ethanol solutions of NiCl₂·6H₂O and AlCl₃·6H₂O with acetylacetone (acac) as an organic ligand. Propylene oxide (PO) as an alkalization reagent was added into precursory solutions to yield monolithic wet gels. The successive pH increase induces the formation of a three-dimensional (3-D) solid framework composed of amorphous Al(OH)₃. Then, amphoteric Al(OH)₃ undergoes crystallization into Ni-Al LDH via an acetylacetone-driven dissolution-crystallization of metal hydroxides without destroying the preformed 3-D solid framework. The process allows us to obtain crystalline aerogel monoliths with high porosity and high transparency after supercritical CO₂ drying of wet gels. The present scheme can be expected to synthesize functionalized aerogel composed of crystalline transition-metal oxide/hydroxide nanobuilding blocks (NBBs).

Enhanced Heck reaction on flower-like Co(Mg or Ni)Al layered double hydroxide supported ultrafine PdCo alloy nanocluster catalysts: the promotional effect of Co

A series of PdCo alloy nanocluster (NC) catalysts x-PdCo_r/Co(Mg or Ni)Al-LDH (x: Pd loading, r: Co/Pd molar ratio) were synthesized by immobilizing ultrafine PdCo_r-PVP NCs on flower-like layered double hydroxide (LDH) supports. The sizes of PdCo alloy NCs of the catalysts can be elaborately tuned in ∼1.6-3.2 nm by both Co/Pd ratios and Pd loadings, and the PdCo NCs are mainly dispersed on the edge sites of LDH nanosheets upon a flower-like morphology. The PdCo bimetallic catalysts 0.81-PdCo_0.10/MgAl-LDH (2.6 ± 0.6 nm), 0.86-PdCo_0.28/MgAl-LDH (2.3 ± 0.7 nm) and 0.79-PdCo_0.54/MgAl-LDH (3.2 ± 0.9 nm) exhibit enhanced activity compared with the monometallic Pd catalyst for Heck coupling of iodobenzene with styrene. Particularly, 0.86-PdCo_0.28/MgAl-LDH shows the highest activity, which can be attributed to its smallest PdCo_0.28 alloy NCs, and the maximum electron density of the Pd⁰ center resulted from the electron transfer from Co and the strongest PdCo_0.28 NCs - LDH synergistic effect. 0.67-PdCo_0.28/CoAl-LDH shows much better activity than those of 0.64-PdCo_0.28/NiAl-LDH and 0.86-PdCo_0.28/MgAl-LDH. The lowest Pd loading sample 0.01-PdCo_0.28/CoAl-LDH (1.6 ± 0.4 nm) shows an ultrahigh turnover frequency of 163 000 h^-1 (Pd: 1.9 × 10^-5 mol%), which is the highest value obtained so far. Meanwhile, the catalyst shows excellent adaptability for the substrates and can be reused for 12 runs without significant loss of activity. The present work may provide a new idea for the simple and green synthesis of ultrafine Pd-based non-noble bimetallic catalysts for varied catalytic processes.

Hierarchical flower-like NiAl-layered double hydroxide microspheres encapsulated with black Cu-doped TiO2 nanoparticles: Highly efficient visible-light-driven composite photocatalysts for environmental remediation

Herein, highly efficient composite photocatalysts comprising black Cu-doped TiO₂ nanoparticles (BCT) encapsulated within hierarchical flower-like NiAl-layered double hydroxide (LDH) microspheres were fabricated via a one-step hydrothermal route. Cu-doping and subsequent reduction treatment led to extended visible-light absorption of TiO₂ in the resulting composites, as confirmed by ultraviolet-visible diffuse reflectance spectral analysis. Moreover, thorough investigations confirmed the strong interactions between LDH and BCT in the resulting BCT/LDH composites. Notably, the BCT/LDH composites exhibited remarkable performance in the degradation of hazardous materials (methyl orange and isoniazid), superior to that of the individual components, reference P25, and P25/LDH under visible-light irradiation. Moreover, the BCT/LDH composite containing 30 wt% of BCT displayed the highest photocatalytic performance among the synthesized photocatalysts and also exhibited high stability during recycling tests with no obvious change in the activity. The superior photodegradation activity of the BCT/LDH composites was primarily attributed to efficient transfer and separation of the photoinduced charge carriers, resulting from the intimate contact interfaces between LDH and BCT. This approach represents a promising route for the rational design of highly efficient and visible-light-active LDH-based composite photocatalysts for application in energy harvesting and environmental protection.

Cooperative Surface-Particle Catalysis: The Role of the "Active Doughnut" in Catalytic Oxidation

We consider the factors that govern the activity of bifunctional catalysts comprised of active particles supported on active surfaces. Such catalysts are interesting because the adsorption and diffusion steps, which are often discounted in "conventional" catalytic scenarios, play a key role here. We present an intuitive model, the so-called "active doughnut" concept, defining an active catalytic region around the supported particles. This simple model explains the role of adsorption and diffusion steps in cascade catalytic cycles for active particles supported on active surfaces. The concept has two important practical implications. First, the reaction rate is no longer proportional to the number of active sites, but rather to the number of "communicative" active sites-those available to the reaction intermediates during their respective lifetimes. Second, it generates an important testable prediction concerning the dependence of the total reaction rate on the particle size. With these tools at hand, we examine six experimental examples of catalytic oxidation from the literature, and show that the active doughnut concept gives valuable insight even when detailed mechanistic information is hard to come by.

g-C3N4/NiAl-LDH 2D/2D Hybrid Heterojunction for High-Performance Photocatalytic Reduction of CO2 into Renewable Fuels

2D/2D interface heterostructures of g-C₃N₄ and NiAl-LDH are synthesized utilizing strong electrostatic interactions between positively charged 2D NiAl-LDH sheets and negatively charged 2D g-C₃N₄ nanosheets. This new 2D/2D interface heterojunction showed remarkable performance for photocatalytic CO₂ reduction to produce renewable fuels such as CO and H₂ under visible-light irradiation, far superior to that of either single phase g-C₃N₄ or NiAl-LDH nanosheets. The enhancement of photocatalytic activity could be attributed mainly to the excellent interfacial contact at the heterojunction of g-C₃N₄/NiAl-LDH, which subsequently results in suppressed recombination, and improved transfer and separation of photogenerated charge carriers. In addition, the optimal g-C₃N₄/NiAl-LDH nanocomposite possessed high photostability after successive experimental runs with no obvious change in the production of CO from CO₂ reduction. Our findings regarding the design, fabrication and photophysical properties of 2D/2D heterostructure systems may find use in other photocatalytic applications including H₂ production and water purification.

Defect-rich Ni–Ti layered double hydroxide as a highly efficient support for Au nanoparticles in base-free and solvent-free selective oxidation of benzyl alcohol

Defect-rich Ni–Ti layered double hydroxide supported Au nanoparticles exhibited greatly enhanced activity in the oxidation of benzyl alcohol.

The role of various oxygen species in Mn-based layered double hydroxide catalysts in selective alcohol oxidation

Precise identification of oxygen species in LDH-based catalysts was investigated for the first time for alcohol oxidation.

Catalytic application of layered double hydroxide-derived catalysts for the conversion of biomass-derived molecules

Layered double hydroxide and its derived metal oxides in the transformations of biomass-derived molecules.

Au@Cu(II)-MOF: Highly Efficient Bifunctional Heterogeneous Catalyst for Successive Oxidation-Condensation Reactions

A new composite Au@Cu(II)-MOF catalyst has been synthesized via solution impregnation and full characterized by HRTEM, SEM-EDS, XRD, gas adsorption-desorption, XPS, and ICP analysis. It has been shown here that the Cu(II)-framework can be a useful platform to stabilize and support gold nanoparticles (Au NPs). The obtained Au@Cu(II)-MOF exhibits a bifunctional catalytic behavior and is able to promote selective aerobic benzyl alcohol oxidation-Knoevenagel condensation in a stepwise way.

Mesoporous Ni/Ce1−xNixO2−y heterostructure as an efficient catalyst for converting greenhouse gas to H2 and syngas

A heterostructure of highly dispersed Ni nanoparticles in pore channels of Ni–CeO₂ solid solution, having excellent thermo-stability, redox properties, and metal/support synergy, is identified as an efficient nanocatalyst for converting greenhouse gas into H₂ energy and syngas.

Macroporous TiO2encapsulated Au@Pd bimetal nanoparticles for the photocatalytic oxidation of alcohols in water under visible-light

A novel macroporous photocatalyst Au@Pd@TiO₂has been reported and showed excellent catalytic activity and stability in the aerobic oxidation of alcohols in water at ambient temperature when using air as the oxidizing agent under visible light irradiation.

Facile synthesis of supported RuO2·xH2O nanoparticles on Co–Al hydrotalcite for the catalytic oxidation of alcohol: effect of temperature pretreatment

RuO₂·xH₂O/CoAl-LDH synthesized by the co-precipitation method was pretreated by different temperature which showed the highest activity at 200 °C.

Supported catalysts based on layered double hydroxides for catalytic oxidation and hydrogenation: general functionality and promising application prospects

Oxidation and hydrogenation catalysis plays a crucial role in the current chemical industry for the production of key chemicals and intermediates. Because of their easy separation and recyclability, supported catalysts are widely used in these two processes. Layered double hydroxides (LDHs) with the advantages of unique structure, composition diversity, high stability, ease of preparation and low cost have shown great potential in the design and synthesis of novel supported catalysts. This review summarizes the recent progress in supported catalysts by using LDHs as supports/precursors for catalytic oxidation and hydrogenation. Particularly, partial hydrogenation of acetylene, hydrogenation of dimethyl terephthalate, methanation, epoxidation of olefins, elimination of NOx and SOx emissions, and selective oxidation of biomass have been chosen as representative reactions in the petrochemical, fine chemicals, environmental protection and clean energy fields to highlight the potential application and the general functionality of LDH-based catalysts in catalytic oxidation and hydrogenation. Finally, we concisely discuss some of the scientific challenges and opportunities of supported catalysts based on LDH materials.

Surfactant-free Pd@pSiO2 yolk–shell nanocatalysts for selective oxidation of primary alcohols to aldehydes

The surfactant-free Pd@pSiO₂ yolk–shell nanoparticles proved to be an efficient catalyst for the oxidation of substituted benzyl alcohols.