Heavy Alkaline Earth Cyclic (Alkyl)(Amino)Carbene Complexes Supported by Aryl-Silyl Amides

A series of 8 trigonal planar, heavy alkaline earth (AE = Ca-Ba) metal complexes containing cyclic (alkyl)(amino)carbene (CAAC) ligands were prepared from AE bis(amide) species. Complexation can be achieved by first generating the free carbene in situ or by direct addition of the free carbene, with the former route giving rise to unexpected mixed-amide AE complexes. The frontier molecular orbitals of the highly equatorial, 3-coordinate AE-CAAC species were also probed computationally, revealing the lowest unoccupied molecular orbital (LUMO) consisting predominantly of the π* system located on the carbene ligand.

A Blueprint for the Stabilization of Sub-Valent Alkaline Earth Complexes

The study of sub-valent Group 2 chemistry is a relatively new research field, being established in 2007 with the report of the first Mg(I) dimers. These species are stabilized by the formation of a Mg-Mg covalent bond; however, the extension of this chemistry to heavier alkaline earth (AE) metals has been frustrated by significant synthetic challenges, primarily associated with the instability of heavy AE-AE interactions. Here we present a new blueprint for the stabilization of heavy AE(I) complexes, based upon the reduction of AE(II) precursors with planar coordination geometries. We report the synthesis and structural characterisation of homoleptic trigonal planar AE(II) complexes of the monodentate amides {N(SiMe3 )2 }- and {N(Mes)(SiMe3 )}- . DFT calculations showed that the LUMOs of these complexes all show some d-character for AE = Ca-Ba. DFT analysis of the square planar Sr(II) complex [Sr{N(SiMe3 )2 }(dioxane)2 ]∞ revealed analogous frontier orbital d-character. AE(I) complexes that could be accessed by reduction of these AE(II) precursors were modelled computationally, revealing exergonic formation in all cases. Crucially, NBO calculations show that some d-character is preserved in the SOMO of theoretical AE(I) products upon reduction, showing that d-orbitals could play a crucial role in achieving stable heavy AE(I) complexes.

Cyclic (amino)(barrelene)carbenes: an original family of CAACs through a novel synthetic pathway

A novel family of cyclic (alkyl)(amino)carbenes, which we name cyclic (amino)(barrelene)carbenes (CABCs) is reported. The key synthetic step involves an intramolecular [4+2] cyclization of an anthracene derivative with an alkyne. This synthetic approach allows for the attachment of both aryl and alkyl groups on the nitrogen atom. When used as ligand, two of the barrelene hydrogens are in close contact with the metal, which could stabilize low valent catalytic intermediates.

Access to a Labile Monomeric Magnesium Radical by Ball-Milling

In order to isolate a monometallic Mg radical, the precursor (Am)MgI⋅(CAAC) (1) was prepared (Am=tBuC(N-DIPP)2 , DIPP=2,6-diisopropylphenyl, CAAC=cyclic (alkyl)(amino)carbene). Reduction of a solution of 1 in toluene with the reducing agent K/KI led to formation of a deep purple complex that rapidly decomposed. Ball-milling of 1 with K/KI gave the low-valent MgI complex (Am)Mg⋅(CAAC) (2) which after rapid extraction with pentane and crystallization was isolated in 15 % yield. Although a benzene solution of 2 decomposes rapidly to give Mg(Am)2 (3) and unidentified products, the radical is stable in the solid state. Its crystal structure shows planar trigonal coordination at Mg. The extremely short Mg-C distance of 2.056(2) Å indicates strong Mg-CAAC bonding. Calculations and EPR measurements show that most of the spin density is in a π* orbital located at the C-N bond in CAAC, leading to significant C-N bond elongation. This is supported by calculated NPA charges in 2: Mg +1.73, CAAC -0.82. Similar metal-to-CAAC charge transfer was calculated for M0 (CAAC)2 and [MI (CAAC)2 + ] (M=Be, Mg, Ca) complexes in which the metal charges range from +1.50 to +1.70. Although the spin density of the radical is mainly located at the CAAC ligand, complex 2 reacts as a low-valent MgI complex: reaction with a I2 solution in toluene gave (Am)MgI⋅(CAAC) (1) as the major product.

Cyclic (Alkyl)(amino)carbene Lanthanide Amides: Synthesis, Structure, and Catalytic Selective Hydrosilylation of Alkenes

The first examples of cyclic (alkyl)(amino)carbene (CAAC) lanthanide (Ln) complexes were synthesized from the reaction of CAAC with Yb[N(SiMe₃)₂]₂ and Eu[N(SiMe₃)₂]₂(THF)₂ (THF = tetrahydrofuran). The structures of (CAAC)Yb[N(SiMe₃)₂]₂ (2) and (CAAC)Eu[N(SiMe₃)₂]₂(THF) (3) were determined by X-ray diffraction analysis. Density functional theory calculations of 2 revealed the predominantly ionic bond between the Ln ion and CAAC. Complex 3 enabled catalytic hydrosilylation of aryl- and silylalkenes with primary and secondary silanes in high yields and Markovnikov selectivity.

Stepwise Reduction at Magnesium and Beryllium: Cooperative Effects of Carbenes with Redox Non-Innocent α-Diimines

In the past two decades, the organometallic chemistry of the alkaline earth elements has experienced a renaissance due in part to developments in ligand stabilization strategies. In order to expand the scope of redox chemistry known for magnesium and beryllium, we have synthesized a set of reduced magnesium and beryllium complexes and compared their resulting structural and electronic properties. The carbene-coordinated alkaline earth-halides, (^Et2CAAC)MgBr₂ (1), (SIPr)MgBr₂ (2), (^Et2CAAC)BeCl₂ (3), and (SIPr)BeCl₂ (4) [^Et2CAAC = diethyl cyclic(alkyl)(amino) carbene; SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazole-2-ylidene] were combined with an α-diimine [2,2-bipyridine (bpy) or bis(2,6-diisopropylphenyl)-1,4-diazabutadiene (^DippDAB)] and the appropriate stoichiometric amount of potassium graphite to form singly- and doubly-reduced compounds (^Et2CAAC)MgBr(^DippDAB) (5), (^Et2CAAC)MgBr(bpy) (6), (^Et2CAAC)Mg(^DippDAB) (7), (^Et2CAAC)Be(bpy) (8), and (SIPr)Be(bpy) (9). The doubly-reduced compounds 7-9 exhibit substantial π-bonding interactions across the diimine core, metal center, and π-acidic carbene. Each complex was fully characterized by UV-vis, FT-IR, X-ray crystallography, ¹H, ¹³C, and ⁹Be NMR, or EPR where applicable. We use these compounds to highlight the differences in the organometallic chemistry of the lightest alkaline earth metals, magnesium and beryllium, in an otherwise identical chemical environment.

Transmetalation from Magnesium–NHCs—Convenient Synthesis of Chelating π-Acidic NHC Complexes

The synthesis of chelating N-heterocyclic carbene (NHC) complexes with considerable π-acceptor properties can be a challenging task. This is due to the dimerization of free carbene ligands, the moisture sensitivity of reaction intermediates or reagents, and challenges associated with the workup procedure. Herein, we report a general route using transmetalation from magnesium–NHCs. Notably, this route gives access to transition-metal complexes in quantitative conversion without the formation of byproducts. It therefore produces transition-metal complexes outperforming the conventional routes based on free or lithium-coordinated carbene, silver complexes, or in situ metalation in dimethyl sulfoxide (DMSO). We therefore propose transmetalation from magnesium–NHCs as a convenient and general route to obtain NHC complexes.

NHCs in Main Group Chemistry

Since the discovery of the first stable N-heterocyclic carbene (NHC) in the beginning of the 1990s, these divalent carbon species have become a common and available class of compounds, which have found numerous applications in academic and industrial research. Their important role as two-electron donor ligands, especially in transition metal chemistry and catalysis, is difficult to overestimate. In the past decade, there has been tremendous research attention given to the chemistry of low-coordinate main group element compounds. Significant progress has been achieved in stabilization and isolation of such species as Lewis acid/base adducts with highly tunable NHC ligands. This has allowed investigation of numerous novel types of compounds with unique electronic structures and opened new opportunities in the rational design of novel organic catalysts and materials. This Review gives a general overview of this research, basic synthetic approaches, key features of NHC-main group element adducts, and might be useful for the broad research community.

Borylenes: An Emerging Class of Compounds

Free borylenes (R-B:) have only been spectroscopically characterized in the gas phase or in matrices at very low temperatures. However, in recent years, a few mono- and bis(Lewis base)-stabilized borylenes have been isolated. In both of these compounds the boron atom is in the formal oxidation state +I which contrasts with classical organoboron derivatives wherein the element is in the +III oxidation state. Mono(Lewis base)-stabilized borylenes are isoelectronic with singlet carbenes, and their reactivity mimics to some extent that of transition metals. They can activate small molecules, such as H₂ , and coordinate an additional ligand; in other words, they are boron metallomimics. Bis(Lewis base)borylene adducts are isoelectronic with amines and phosphines. In contrast to boranes, which act as electron acceptors and thus Lewis acids, they are electron-rich and act as ligands for transition metals.

Calcium, Strontium and Barium Homogeneous Catalysts for Fine Chemicals Synthesis

The large alkaline earths (Ae), calcium, strontium and barium, have in the past 15 years yielded a brand new generation of heteroleptic molecular catalysts for the production of fine chemicals. However, the integrity of these complexes is often plagued by ligand redistribution equilibria in solution. This personal account retraces the paths followed in our research group towards the design of stable heteroleptic alkalino-earth complexes, including the use of intramolecular noncovalent Ae···H-Si and Ae···F-C interactions. Their implementation as homogenous precatalysts for reactions such as the intramolecular and intermolecular hydroamination and hydrophosphination of activated alkenes, the hydrophosphonylation of ketones, and the dehydrogenative coupling of amines and hydrosilanes that enable the efficient and controlled formations of CP, CN, or SiN σ-bonds, is presented in a synthetic perspective that highlights their overall outstanding catalytic performance.