Photocatalytic conversion of CO2 over graphene-based composites: current status and future perspective

Sunlight-driven CO2utilization over two-dimensional Co-based nanosheets

Reverse water gas shift (RWGS) reaction is an intriguing strategy to realize carbon neutrality, however, the endothermic process usually needs high temperature that supplied by non-renewable fossil fuels, resulting in secondary energy and environmental issues. Photothermal catalysis are ideal substitutes for the conventional thermal catalysis, providing that high reaction efficiency is achievable. Two-dimensional (2D) materials are highly active as RWGS catalysts, however, their industrial application is restricted by the preparation cost. In this study, a series of 2D Co-based catalysts for photothermal RWGS reaction with tunable selectivity were prepared by self-assembly method based on cheap amylum, by integrating the 2D catalysts with our homemade photothermal device, sunlight driven efficient RWGS reaction was realized. The prepared 2D Co0.5Ce0.5Oxexhibited a full selectivity toward CO (100%) and could be heated to 318 °C under 1 kW m-2irradiation with the CO generation rate of 14.48 mmol g-1h-1, pointing out a cheap and universal method to prepare 2D materials, and zero consumption CO generation from photothermal RWGS reaction.

Integrating Co(OH)2 nanosheet arrays on graphene for efficient noble-metal-free EY-sensitized photocatalytic H2 evolution

The development of an efficient noble-metal-free cocatalyst is the key to photocatalytic hydrogen production technology. In this study, hierarchical Co(OH)2 nanosheet array-graphene (GR) composite cocatalysts are developed. With Eosin Y (EY) as a photosensitizer, the optimal Co(OH)2-10%GR hybrid cocatalyst presents excellent photocatalytic activity with an H2 production rate of 17 539 μmol g-1 h-1, and the apparent quantum yield for hydrogen production can reach 12.8% at 520 nm, which remarkably surpasses that of pure Co(OH)2 and most similar hybrid cocatalyst systems. Experimental investigations demonstrate that the excellent photocatalytic activity of Co(OH)2-GR arises from its unique nanosheet array architecture, which can collaboratively expose rich active sites for photocatalytic hydrogen evolution and facilitate the migration and separation of photogenerated charge carriers. It is desired that this study would supply a meaningful direction for the rational optimization of the constitute and structure of cocatalysts to achieve efficient photocatalytic hydrogen generation.

Progress on simultaneous photocatalytic degradation of pollutants and production of clean energy: A review

In the current era of severe energy and environmental crises, the need for efficient and sustainable methods to control pollution and promote resource recycling has become increasingly important. Photocatalytic degradation of pollutants and simultaneous production of clean energy is one such approach that has garnered significant attention in recent years. The principle of photocatalysis involves the development of efficient photocatalysts and the efficient utilization of solar energy. The use of organic contaminants can enhance the photocatalytic reactions, leading to the sustainable generation of clean energy. Herein, we provide a comprehensive review of the latest advances in the application of photocatalytic synergized clean energy production in the environmental field. This review highlights the latest developments and achievements in this field, highlighting the potential for this approach to revolutionize the way we approach environmental pollution control and resource recycling. The review focuses on (1) the mechanism of photocatalytic degradation and synergistic energy production, (2) photocatalysts and synthesis strategies, (3) photocatalytic carbon dioxide reduction, (4) pollutant degradation, and (5) hydrogen and electricity production. In addition, perspectives on key challenges and opportunities in photocatalysis and clean energy for future developments are proposed. This review provides a roadmap for future research directions and innovations of photocatalysis that could contribute to the development of more sustainable and cleaner energy solutions.

Advanced Catalyst for CO2 Photo-Reduction: From Controllable Product Selectivity by Architecture Engineering to Improving Charge Transfer Using Stabilized Au Clusters

Despite enormous progress and improvement in photocatalytic CO₂ reduction reaction (CO₂ RR), the development of photocatalysts that suppress H₂ evolution reaction (HER), during CO₂ RR, remains still a challenge. Here, new insight is presented for controllable CO₂ RR selectivity by tuning the architecture of the photocatalyst. Au/carbon nitride with planar structure (p Au/CN) showed high activity for HER with 87% selectivity. In contrast, the same composition with a yolk@shell structure (Y@S Au@CN) exhibited high selectivity of carbon products by suppressing the HER to 26% under visible light irradiation. Further improvement for CO₂ RR activity was achieved by a surface decoration of the yolk@shell structure with Au₂₅ (PET)₁₈ clusters as favorable electron acceptors, resulting in longer charge separation in Au@CN/Au_c Y@S structure. Finally, by covering the structure with graphene layers, the designed catalyst maintained high photostability during light illumination and showed high photocatalytic efficiency. The optimized Au@CN/Au_c /G Y@S structure displays high photocatalytic CO₂ RR selectivity of 88%, where the CO and CH₄ generations during 8 h are 494 and 198 µmol/gcat., respectively. This approach combining architecture engineering and composition modification provides a new strategy with improved activity and controllable selectivity toward targeting applications in energy conversion catalysis.

Recent Developments and Perspectives of Cobalt Sulfide-Based Composite Materials in Photocatalysis

Photocatalysis, as an inexpensive and safe technology to convert solar energy, is essential for the efficient utilization of sustainable renewable energy sources. Earth-abundant cobalt sulfide-based composites have generated great interest in the field of solar fuel conversion because of their cheap, diverse structures and facile preparation. Over the past 10 years, the number of reports on cobalt sulfide-based photocatalysts has increased year by year, and more than 500 publications on the application of cobalt sulfide groups in photocatalysis can be found in the last three years. In this review, we initially summarize the four common strategies for preparing cobalt sulfide-based composite materials. Then, the multiple roles of cobalt sulfide-based cocatalysts in photocatalysis have been discussed. After that, we present the latest progress of cobalt sulfide in four fields of photocatalysis application, including photocatalytic hydrogen production, carbon dioxide reduction, nitrogen fixation, and photocatalytic degradation of pollutants. Finally, the development prospects and challenges of cobalt sulfide-based photocatalysts are discussed. This review is expected to provide useful reference for the construction of high-performance cobalt sulfide-based composite photocatalytic materials for sustainable solar-chemical energy conversion.

Recent Trends in Plasmon-Assisted Photocatalytic CO2 Reduction

Direct photocatalytic reduction of CO₂ has become an highly active field of research. It is thus of utmost importance to maintain an overview of the various materials used to sustain this process, find common trends, and, in this way, eventually improve the current conversions and selectivities. In particular, CO₂ photoreduction using plasmonic photocatalysts under solar light has gained tremendous attention, and a wide variety of materials has been developed to reduce CO₂ towards more practical gases or liquid fuels (CH₄ , CO, CH₃ OH/CH₃ CH₂ OH) in this manner. This Review therefore aims at providing insights in current developments of photocatalysts consisting of only plasmonic nanoparticles and semiconductor materials. By classifying recent studies based on product selectivity, this Review aims to unravel common trends that can provide effective information on ways to improve the photoreduction yield or possible means to shift the selectivity towards desired products, thus generating new ideas for the way forward.

Investigation on the role of graphene-based composites for in photocatalytic degradation of phenol-based compounds in wastewater: a review

The ineptitude of conventional water management systems to eradicate noxious compounds leads to the development of advanced treatment systems. The disclosure of graphene-based photocatalytic degradation for the eradication of phenolic compounds has become the "apple of the eye" for many researchers. This review article describes the advanced research progress during the period of 2008-2021 in graphene-based nanocomposites and discusses their different synthesis methods. We will also talk about the applications of nanocomposite in water splitting, dye degradation, solar fuel generations, and organic transformations. Multicomponent heterojunction structure, co-catalyst cohering, and noble metal coupling have been inspected to enhance the photocatalytic performance of graphene-based composite by increasing charge separation and stability. The photocatalytic system's remarkable stability has been described in terms of facile recyclability. The adsorption ability of phenolic compounds has been addressed in the form of Langmuir and Freundlich adsorption isotherm with various factors (pH, concentration, the intensity of light, the effect of catalyst, the effect of time, etc.). The purpose of this review is to survey mechanisms and processes that enlist graphene-based composite in terms of efficacy and dose of catalyst required to attain 99% degradation. Nanoparticles may cause toxicity and a pretext for their toxicity has been mentioned. Finally, it is anticipated that this article could allocate consequential knowledge to fabricating graphene-based composites that are in crucial demand of being discussed in future research.

Engineering 2D Materials for Photocatalytic Water-Splitting from a Theoretical Perspective

Splitting of water with the help of photocatalysts has gained a strong interest in the scientific community for producing clean energy, thus requiring novel semiconductor materials to achieve high-yield hydrogen production. The emergence of 2D nanoscale materials with remarkable electronic and optical properties has received much attention in this field. Owing to the recent developments in high-end computation and advanced electronic structure theories, first principles studies offer powerful tools to screen photocatalytic systems reliably and efficiently. This review is organized to highlight the essential properties of 2D photocatalysts and the recent advances in the theoretical engineering of 2D materials for the improvement in photocatalytic overall water-splitting. The advancement in the strategies including (i) single-atom catalysts, (ii) defect engineering, (iii) strain engineering, (iv) Janus structures, (v) type-II heterostructures (vi) Z-scheme heterostructures (vii) multilayer configurations (viii) edge-modification in nanoribbons and (ix) the effect of pH in overall water-splitting are summarized to improve the existing problems for a photocatalytic catalytic reaction such as overcoming large overpotential to trigger the water-splitting reactions without using cocatalysts. This review could serve as a bridge between theoretical and experimental research on next-generation 2D photocatalysts.

Emerging Stacked Photocatalyst Design Enables Spatially Separated Ni(OH)2 Redox Cocatalysts for Overall CO2 Reduction and H2 O Oxidation

Construction of photocatalytic systems with spatially separated dual cocatalysts is considered as a promising route to modulate charge separation/transfer, promote surface redox reactivities, and prevent unwanted reverse reactions. However, past efforts on the loading of spatially separated double-cocatalysts are limited to hollow structured semiconductors with inner/outer surface and monocrystalline semiconductors with different exposed facets. To overcome this limitation, herein, enabled by a unique stacked photocatalyst design, a facile and versatile strategy for spatial separation of redox cocatalysts on various semiconductors without structural and morphological restriction is demonstrated. The smart design begins with the deposition of light-harvesting semiconductors on reduced graphene oxide (rGO) nanosheets, followed with the coverage of Ni(OH)₂ outer layer. The ternary photocatalysts exhibit superior activities and stabilities of H₂ O oxidation and selective CO₂ -to-CO reduction, remarkably surpassing other counterparts. The origin of the enhanced performance is attributed to the synergistic interplay of rGO@Ni(OH)₂ reduction cocatalysts surrounding the semiconductors and Ni(OH)₂ oxidation cocatalysts directly supported by the semiconductors, which mitigates the charge recombination, supplies highly active and selective sites for overall reactions, and preserves the semiconductors from photocorrosion. This work presents a new approach to regulating the position of dual cocatalysts and ameliorating the net efficiency of photoredox catalysis.

ZnIn2 S4 -Based Photocatalysts for Energy and Environmental Applications

As a fascinating visible-light-responsive photocatalyst, zinc indium sulfide (ZnIn₂ S₄ ) has attracted extensive interdisciplinary interest and is expected to become a new research hotspot in the near future, due to its nontoxicity, suitable band gap, high physicochemical stability and durability, ease of synthesis, and appealing catalytic activity. This review provides an overview on the recent advances in ZnIn₂ S₄ -based photocatalysts. First, the crystal structures and band structures of ZnIn₂ S₄ are briefly introduced. Then, various modulation strategies of ZnIn₂ S₄ are outlined for better photocatalytic performance, which includes morphology and structure engineering, vacancy engineering, doping engineering, hydrogenation engineering, and the construction of ZnIn₂ S₄ -based composites. Thereafter, the potential applications in the energy and environmental area of ZnIn₂ S₄ -based photocatalysts are summarized. Finally, some personal perspectives about the promises and prospects of this emerging material are provided.

Co-Fe Nanoparticles Wrapped on N-Doped Graphitic Carbons as Highly Selective CO2 Methanation Catalysts

Pyrolysis of chitosan containing various loadings of Co and Fe renders Co-Fe alloy nanoparticles supported on N-doped graphitic carbon. Transmission electron microscopy (TEM) images show that the surface of Co-Fe NPs is partially covered by three or four graphene layers. These Co-Fe@(N)C samples catalyze the Sabatier CO₂ hydrogenation, increasing the activity and CH₄ selectivity with the reaction temperature in the range of 300-500 °C. Under optimal conditions, a CH₄ selectivity of 91% at an 87% CO₂ conversion was reached at 500 °C and a space velocity of 75 h^-1 under 10 bar. The Co-Fe alloy nanoparticles supported on N-doped graphitic carbon are remarkably stable and behave differently as an analogous Co-Fe catalyst supported on TiO₂.

Roles of Graphene Oxide in Heterogeneous Photocatalysis

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

Recent Advancements in Photocatalytic Valorization of Plastic Waste to Chemicals and Fuels

The continuous rise in plastic waste raises serious concerns about the ensuing effects on the pollution of global environment and loss of valuable resources. Developing efficient approach to recycle the plastic has been an urgent demand for realizing a sustainable circular economy. Photocatalytic valorization directly utilizes solar energy to transform plastic pollutant into chemicals and fuels, which is hardly implemented by traditional mechanical recycling and incineration strategies, thus offering a promising approach to address the contemporary waste and energy challenges. Here, we focus on the recent advances in the high-value utilization of plastic waste through photocatalysis. The basic principle and different reaction pathways for the photocatalytic valorization of plastic waste are presented. Then, the developed representative photocatalyst systems and converted products are elaborately discussed. At last, the review closes with critical thoughts on research challenges along with some perspectives for further development of this emerging and fascinating filed.

Enhancement of photocatalytic by Mn3O4 spinel ferrite decorated graphene oxide nanocomposites

Abstract

The hydrothermal process was used to prepare Mn3O4/x%GO nanocomposites (NC’s) having different ratios of the Mn3O4 nanoparticles (NP’s) on the surface of graphene oxide (GO) sheet. SEM image showed that the Mn3O4 NP’s were distributed over the surface of GO sheet. HRTEM images exhibited the lattice fringe arising from the (101) plane of the Mn3O4 NP’s having the interplanar d-spacing of 0.49 nm decorating on the surface of GO. The electronic absorption spectra of Mn3O4/x%GO NC’s also show broad bands from 250 to 550 nm. These bands arise from the d–d crystal field transitions of the tetrahedral Mn3+ species and indicate a distortion in the crystal structure. Photo-catalytic activity of spinel ferrite Mn3O4 NP’s by themselves was low but photo-catalytic activity is enhanced when the NP’s are decorating the GO sheet. Moreover, the Mn3O4/10%GO NC’s showed the best photo-catalytic activity. This result comes from the formation of Mn–O–C bond that confirm by FT-IR. This bond would facilitate the transfer of the photoelectrons from the surfaces of the NP’s to the GO sheets. PL emission which is in the violet–red luminescent region shows the creation of defects in the fabricated Mn3O4 NP’s nanostructures. These defects create the defect states to which electrons in the VB can be excited to when the CB. The best degradation efficiency was achieved by the Mn3O4 NP’s when they were used to decorate the GO sheets in the Mn3O4/10%GO NC’s solution.

Highlights

Graphic abstract

Selective photocatalytic production of CH4 using Zn-based polyoxometalate as a nonconventional CO2 reduction catalyst

Efficient and selective production of CH₄ through the CO₂ reduction reaction (CO2RR) is a challenging task due to the high amount of energy consumption and various reaction pathways. Here, we report the synthesis of Zn-based polyoxometalate (ZnPOM) and its application in the photocatalytic CO2RR. Unlike conventional Zn-based catalysts that produce CO, ZnPOM can selectively catalyze the production of CH₄ in the presence of an Ir-based photosensitizer (TIr3) through the photocatalytic CO2RR. Photophysical and computation analyses suggest that selective photocatalytic production of CH₄ using ZnPOM and TIr3 can be attributed to (1) the exceptionally fast transfer of photogenerated electrons from TIr3 to ZnPOM through the strong molecular interactions between them and (2) effective transfer of electrons from ZnPOM to *CO intermediates due to significant hybridization of their molecular orbitals. This study provides insights into the design of novel CO2RR catalysts for CH₄ production beyond the limitations in conventional studies that focus on Cu-based materials.

Design, Fabrication, and Mechanism of Nitrogen-Doped Graphene-Based Photocatalyst

Solving energy and environmental problems through solar-driven photocatalysis is an attractive and challenging topic. Hence, various types of photocatalysts have been developed successively to address the demands of photocatalysis. Graphene-based materials have elicited considerable attention since the discovery of graphene. As a derivative of graphene, nitrogen-doped graphene (NG) particularly stands out. Nitrogen atoms can break the undifferentiated structure of graphene and open the bandgap while endowing graphene with an uneven electron density distribution. Therefore, NG retains nearly all the advantages of original graphene and is equipped with several novel properties, ensuring infinite possibilities for NG-based photocatalysis. This review introduces the atomic and band structures of NG, summarizes in situ and ex situ synthesis methods, highlights the mechanism and advantages of NG in photocatalysis, and outlines its applications in different photocatalysis directions (primarily hydrogen production, CO₂ reduction, pollutant degradation, and as photoactive ingredient). Lastly, the central challenges and possible improvements of NG-based photocatalysis in the future are presented. This study is expected to learn from the past and achieve progress toward the future for NG-based photocatalysis.

Defective TiO2 for photocatalytic CO2 conversion to fuels and chemicals

Photocatalytic conversion of CO2 into fuels and valuable chemicals using solar energy is a promising technology to combat climate change and meet the growing energy demand. Extensive effort is going on for the development of a photocatalyst with desirable optical, surface and electronic properties. This review article discusses recent development in the field of photocatalytic CO2 conversion using defective TiO2. It specifically focuses on the different synthesis methodologies adapted to generate the defects and their impact on the chemical, optical and surface properties of TiO2 and, thus, photocatalytic CO2 conversion. It also encompasses theoretical investigations performed to understand the role of defects in adsorption and activation of CO2 and identify the mechanistic pathway which governs the formation and selectivity of different products. It is divided into three parts: (i) general mechanism and thermodynamic criteria for defective TiO2 catalyzed CO2 conversion, (ii) theoretical investigation on the role of defects in the CO2 adsorption-activation and mechanism responsible for the formation and selectivity of different products, and (iii) the effect of variation of physicochemical properties of defective TiO2 synthesized using different methods on the photocatalytic conversion of CO2. The review also discusses the limitations and the challenges of defective TiO2 photocatalysts that need to be overcome for the production of sustainable fuel utilizing solar energy.

A Cu(I) based boron imidazolate framework for visible light driven CO2 reduction

A new Cu(i) based boron imidazolate framework, Cu[BH(im)3] (BIF-105, im = imidazole), with a two-dimensional fes-type layer structure was designed and synthesized. The resulting BIF-105 exhibited efficient photocatalytic performance for CO2 reduction with an evolution rate of 933 μmol g-1 h-1 and a selectivity of 83.4% for CO under visible light irradiation, with [Ru(bpy)3]Cl2 as the light absorber and triethanolamine as a sacrificial agent.

Defect engineering of NiCo-layered double hydroxide hollow nanocages for highly selective photoreduction of CO2 to CH4 with suppressing H2 evolution

We found that abundant defects could be created in the HC-NiCo-LDH by constructing a hollow nanocage morphology. The HC-NiCo-LDH showed excellent CO₂ photoreduction performance that increasing the CH₄ selectivity while suppressing the H₂ evolution.

Rationally designed transition metal hydroxide nanosheet arrays on graphene for artificial CO2 reduction

The performance of transition metal hydroxides, as cocatalysts for CO₂ photoreduction, is significantly limited by their inherent weaknesses of poor conductivity and stacked structure. Herein, we report the rational assembly of a series of transition metal hydroxides on graphene to act as a cocatalyst ensemble for efficient CO₂ photoreduction. In particular, with the Ru-dye as visible light photosensitizer, hierarchical Ni(OH)₂ nanosheet arrays-graphene (Ni(OH)₂-GR) composites exhibit superior photoactivity and selectivity, which remarkably surpass other counterparts and most of analogous hybrid photocatalyst system. The origin of such superior performance of Ni(OH)₂-GR is attributed to its appropriate synergy on the enhanced adsorption of CO₂, increased active sites for CO₂ reduction and improved charge carriers separation/transfer. This work is anticipated to spur rationally designing efficient earth-abundant transition metal hydroxides-based cocatalysts on graphene and other two-dimension platforms for artificial reduction of CO₂ to solar chemicals and fuels.

The development of effective, earth-abundant cocatalysts is critical for photocatalytic CO₂ reduction. Here, authors report the assembly of transition metal hydroxides on graphene to act as cocatalyst ensembles for efficient CO₂ photoreduction.

Recent Advances in Solar-Driven Carbon Dioxide Conversion: Expectations versus Reality

Solar-driven carbon dioxide (CO₂) conversion to fuels and high-value chemicals can contribute to the better utilization of renewable energy sources. Photosynthetic (PS), photocatalytic (PC), photoelectrochemical (PEC), and photovoltaic plus electrochemical (PV+EC) approaches are intensively studied strategies. We aimed to compare the performance of these approaches using unified metrics and to highlight representative studies with outstanding performance in a given aspect. Most importantly, a statistical analysis was carried out to compare the differences in activity, selectivity, and durability of the various approaches, and the underlying causes are discussed in detail. Several interesting trends were found: (i) Only the minority of the studies present comprehensive metrics. (ii) The CO₂ reduction products and their relative amount vary across the different approaches. (iii) Only the PV+EC approach is likely to lead to industrial technologies in the midterm future. Last, a brief perspective on new directions is given to stimulate discussion and future research activity.

Perovskites in the Energy Grid and CO2 Conversion: Current Context and Future Directions

CO2 emissions from the consumption of fossil fuels are continuously increasing, thus impacting Earth’s climate. In this context, intensive research efforts are being dedicated to develop materials that can effectively reduce CO2 levels in the atmosphere and convert CO2 into value-added chemicals and fuels, thus contributing to sustainable energy and meeting the increase in energy demand. The development of clean energy by conversion technologies is of high priority to circumvent these challenges. Among the various methods that include photoelectrochemical, high-temperature conversion, electrocatalytic, biocatalytic, and organocatalytic reactions, photocatalytic CO2 reduction has received great attention because of its potential to efficiently reduce the level of CO2 in the atmosphere by converting it into fuels and value-added chemicals. Among the reported CO2 conversion catalysts, perovskite oxides catalyze redox reactions and exhibit high catalytic activity, stability, long charge diffusion lengths, compositional flexibility, and tunable band gap and band edge. This review focuses on recent advances and future prospects in the design and performance of perovskites for CO2 conversion, particularly emphasizing on the structure of the catalysts, defect engineering and interface tuning at the nanoscale, and conversion technologies and rational approaches for enhancing CO2 transformation to value-added chemicals and chemical feedstocks.

An oriented built-in electric field induced by cobalt surface gradient diffused doping in MgIn2S4 for enhanced photocatalytic CH4 evolution

Co gradient doping in MgIn₂S₄ creates an oriented built-in electric field for efficiently extracting carriers from the inside to the surface.

Phase-Selective Disordered Anatase/Ordered Rutile Interface System for Visible-Light-Driven, Metal-Free CO2 Reduction

Visible-light-driven photocatalytic CO₂ reduction using TiO₂ that can absorb light of all wavelengths has been sought for over half a century. Herein, we report a phase-selective disordered anatase/ordered rutile interface system for visible-light-driven, metal-free CO₂ reduction using a narrow band structure, whose conduction band position matches well with the reduction potential of CO₂ to CH₄ and CO. A mixed disordered anatase/ordered rutile (A_d/R_o) TiO₂ was prepared from anatase and rutile phase-mixed P25 TiO₂ at room temperature and under an ambient atmosphere in sodium alkyl amine solutions. The A_d/R_o TiO₂ showed a narrow band structure due to multi-internal energy band gaps of Ti³⁺ defect sites in the disordered anatase phase, leading to high visible light absorption and simultaneously providing fast charge separation through the crystalline rutile phase, which was faster than that of pristine P25 TiO₂. The band gap of A_d/R_o TiO₂ is 2.62 eV with a conduction band of -0.27 eV, which matches well with the reduction potential of -0.24 V_NHE of CO₂/CH₄, leading to effective electron transfer to CO₂. As a result, the A_d/R_o TiO₂ provided the highest CH₄ production (3.983 μmol/(g h)), which is higher than that of even metal (W, Ru, Ag, and Pt)-doped P25, for CO₂ reduction under visible light.

In Situ Grown Monolayer N-Doped Graphene on CdS Hollow Spheres with Seamless Contact for Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is an effective way to simultaneously mitigate the greenhouse effect and the energy crisis. Herein, CdS hollow spheres, on which monolayer nitrogen-doped graphene is in situ grown by chemical vapor deposition, are applied for realizing effective photocatalytic CO₂ reduction. The constructed photocatalyst possesses a hollow interior for strengthening light absorption, a thin shell for shortening the electron migration distance, tight adhesion for facilitating separation and transfer of carriers, and a monolayer nitrogen-doped graphene surface for adsorbing and activating CO₂ molecules. Achieving seamless contact between a photocatalyst and a cocatalyst, which provides a pollution-free and large-area transport interface for carriers, is an effective strategy for improving the photocatalytic CO₂ reduction performance. Therefore, the yield of CO and CH₄ , as dominating products, can be increased by four and five times than that of pristine CdS hollow spheres, respectively. This work emphasizes the importance of contact interface regulation between the photocatalyst and the cocatalyst and provides new ideas for the seamless and large-area contact of heterojunctions.

Sunlight-Fueled, Low-Temperature Ru-Catalyzed Conversion of CO2 and H2 to CH4 with a High Photon-to-Methane Efficiency

Methane, which has a high energy storage density and is safely stored and transported in our existing infrastructure, can be produced through conversion of the undesired energy carrier H2 with CO2. Methane production with standard transition-metal catalysts requires high-temperature activation (300-500 °C). Alternatively, semiconductor metal oxide photocatalysts can be used, but they require high-intensity UV light. Here, we report a Ru metal catalyst that facilitates methanation below 250 °C using sunlight as an energy source. Although at low solar intensity (1 sun) the activity of the Ru catalyst is mainly attributed to thermal effects, we identified a large nonthermal contribution at slightly elevated intensities (5.7 and 8.5 sun) resulting in a high photon-to-methane efficiency of up to 55% over the whole solar spectrum. We attribute the excellent sunlight-harvesting ability of the catalyst and the high photon-to-methane efficiency to its UV-vis-NIR plasmonic absorption. Our highly efficient conversion of H2 to methane is a promising technology to simultaneously accelerate the energy transition and reduce CO2 emissions.

Towards Solar Methanol: Past, Present, and Future

This work aims to provide an overview of producing value-added products affordably and sustainably from greenhouse gases (GHGs). Methanol (MeOH) is one such product, and is one of the most widely used chemicals, employed as a feedstock for ≈30% of industrial chemicals. The starting materials are analogous to those feeding natural processes: water, CO2, and light. Innovative technologies from this effort have global significance, as they allow GHG recycling, while providing society with a renewable carbon feedstock. Light, in the form of solar energy, assists the production process in some capacity. Various solar strategies of continually increasing technology readiness levels are compared to the commercial MeOH process, which uses a syngas feed derived from natural gas. These strategies include several key technologies, including solar-thermochemical, photochemical, and photovoltaic-electrochemical. Other solar-assisted technologies that are not yet commercial-ready are also discussed. The commercial-ready technologies are compared using a technoeconomic analysis, and the scalability of solar reactors is also discussed in the context of light-incorporating catalyst architectures and designs. Finally, how MeOH compares against other prospective products is briefly discussed, as well as the viability of the most promising solar MeOH strategy in an international context.

Enhanced photocatalytic reduction of CO2 to CO over BiOBr assisted by phenolic resin-based activated carbon spheres

Photocatalytic reduction of CO₂ using solar energy to decrease CO₂ emission is a promising clean renewable fuel production technology. Recently, Bi-based semiconductors with excellent photocatalytic activity and carbon-based carriers with large specific surface areas and strong CO₂ adsorption capacity have attracted extensive attention. In this study, activated carbon spheres (ACSs) were obtained via carbonization and steam activation of phenolic resin-based carbon spheres at 850 °C synthesized by suspension polymerization. Then, the BiOBr/ACSs sample was successfully prepared via a simple impregnation method. The as-prepared samples were characterized by XRD, SEM, EDX, DRS, PL, EIS, XPS, BET, CO₂ adsorption isotherm and CO₂-TPD. The BiOBr and BiOBr/ACSs samples exhibited high CO selectivity for photocatalytic CO₂ reduction, and BiOBr/ACSs achieved a rather higher photocatalytic activity (23.74 μmol g⁻¹ h⁻¹) than BiOBr (2.39 μmol g⁻¹ h⁻¹) under simulated sunlight irradiation. Moreover, the analysis of the obtained results indicates that in this photocatalyst system, due to their higher micropore surface area and larger micropore volume, ACSs provide enough physical adsorption sites for CO₂ adsorption, and the intrinsic structure of ACSs can offer effective electron transfer ability for a fast and efficient separation of photo-induced electron–hole pairs. Finally, a possible enhanced photocatalytic mechanism of BiOBr/ACSs was investigated and proposed. Our findings should provide new and important research ideas for the construction of highly efficient photocatalyst systems for the reduction of CO₂ to solar fuels and chemicals.

Photocatalytic reduction of CO₂ using solar energy to decrease CO₂ emission is a promising clean renewable fuel production technology.

In Situ-Fabricated 2D/2D Heterojunctions of Ultrathin SiC/Reduced Graphene Oxide Nanosheets for Efficient CO2 Photoreduction with High CH4 Selectivity

Photoreduction of CO₂ into fuel molecules such as CH₄ represents a promising route to simultaneously explore renewable energy and alleviate global warming. However, the implementation of such a process is hampered by low product yields and poor selectivity. A 2D/2D heterojunction of ultrathin SiC and reduced graphene oxide (RGO) nanosheets was fabricated in situ for efficient and selective photoreduction of CO₂ . Ultrathin SiC suppresses significant charge recombination in the bulk phase, thus providing more energetic electrons. The robust 2D/2D heterojunction allows fast transfer of energetic electrons from SiC to RGO. Combining the vital role of RGO in facilitating CO₂ activation, the optimized SiC/RGO exhibits an electron-transfer rate of 58.17 μmol h^-1  g^-1 towards CO₂ reduction, 2.7 times that of pure SiC (20.25 μmol h^-1  g^-1 ). About 92 % of the transferred electrons from SiC are devoted to generating CH₄ (6.72 μmol h^-1  g^-1 ). Such high efficiency and selectivity are mainly a result of the densely accumulated energetic electrons within RGO, which facilitate the eight-electron process to produce CH₄ . This work will inspire the design of catalyst/cocatalyst systems for efficient and selective photoreduction of CO₂ .

Sustainable Recovery of CO2 by Using Visible-Light-Responsive Crystal Cuprous Oxide/Reduced Graphene Oxide

A simple solution-chemistry method has been investigated to prepare crystal cuprous oxide (Cu2O) incorporated with reduced graphene oxide (designated as Cu2O-rGO-x, where x represents the contents of rGO = 1%, 5% and 10%) in this work. These Cu2O-rGO-x composites combine the prospective advantages of rhombic dodecahedra Cu2O together with rGO nanosheets which have been studied as visible-light-sensitive catalysts for the photocatalytic production of methanol from CO2. Among the Cu2O-rGO-x photocatalysts, the methanol yield photocatalyzed by Cu2O-rGO-5% can be observed to be 355.26 μmol g−1cat, which is ca. 36 times higher than that of pristine Cu2O nanocrystal in the 20th hour under visible light irradiation. The improved activity may be attributed to the enhanced absorption ability of visible light, the superior separation of electron–hole pairs, well-dispersed Cu2O nanocrystals and the increased photostability of Cu2O, which are evidenced by employing UV-vis diffuse reflection spectroscopy, photoluminescence, scanning electron microscopy/transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. This work demonstrates an easy and cost-effective route to prepare non-noble photocatalysts for efficient CO2 recovery in artificial photosynthesis.

Visible-to-NIR Photon Harvesting: Progressive Engineering of Catalysts for Solar-Powered Environmental Purification and Fuel Production

Utilization of diffusive solar energy through photocatalytic processes for environmental purification and fuel production has long been pursued. However, efficient capture of visible-near-infrared (NIR) photons, especially for those with wavelengths longer than 600 nm, is a demanding quest in photocatalysis owing to their relatively low energy. In recent years, benefiting from the advances in photoactive material design, photocatalytic reaction system optimization, and new emerging mechanisms for long-wavelength photon activation, increasing numbers of studies on the harnessing of visible-NIR light for solar-to-chemical energy conversion have been reported. Here, the aim is to comprehensively summarize the progress in this area. The main strategies of the long-wavelength visible-NIR photon capture and the explicitly engineered material systems, i.e., narrow optical gap, photosensitizers, upconversion, and photothermal materials, are elaborated. In addition, the advances in long-wavelength light-driven photo- and photothermal-catalytic environmental remediation and fuel production are discussed. It is anticipated that this review presents the forefront achievements in visible-NIR photon capture and at the same time promotes the development of novel visible-NIR photon harnessing catalysts toward efficient solar energy utilization.