CoS2-decorated CdS nanorods for efficient degradation of organic pollutants

The heterostructure between CoS2 and CdS can improve the charge separation efficiency during photocatalysis and promote the generation of more OH and O2− radicals under light irradiation.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

Investigation of Interfacial Diffusion in PA/PP-g-MAH Laminates Using Nanoscale Infrared Spectroscopy

The characterization of polymer-polymer interfaces is of great interest to understand the diffusion process and chemical interactions in polymeric multiphase systems. This study investigated the formation of the interface layer between polyamide (PA) and polypropylene (PP) and its dependency on the maleic anhydride (MAH) content in PP. New insights with a very high level of details on the formation of the interfacial layer are obtained by employing a special technique of atomic force microscopy (AFM) combined with infrared (IR) for chemical imaging at nanoscale spatial resolution. This enables the determination of the interface thickness and even the observation and visualization of the diffusion gradient across the PA/PP interface layer. Combined with classical investigation methods such as interfacial energy and rheology, the method of nano-IR spectroscopy represents a very powerful tool to obtain more insights and a deeper understanding of the interfacial phenomenon in multiphase polymeric systems.

Polymer Nanofibers Exhibiting Remarkable Activity in Driving the Living Polymerization under Visible Light and Reusability

Visible light-driving syntheses have emerged as a powerful tool for organic synthesis and for the preparation of macromolecules under mild and environmentally benign conditions. However, precious but nonreusable photosensitizers or photocatalysts are often required to activate the reaction, limiting its practicality. Here, it is reported that poly(1,4-diphenylbutadiyne) (PDPB) nanofibers exhibit remarkable activity in driving the living free radical polymerization under visible light. Moreover, PDPB nanofibers are very stable under irradiation of visible light and can be reused without appreciable loss of activity even after repeated cycling. The nanofiber will be a promising photocatalyst with excellent reusability and stability for the reactions driven by visible light.

In vivo atomic force microscopy-infrared spectroscopy of bacteria

A new experimental platform for probing nanoscale molecular changes in living bacteria using atomic force microscopy-infrared (AFM-IR) spectroscopy is demonstrated. This near-field technique is eminently suited to the study of single bacterial cells. Here, we report its application to monitor dynamical changes occurring in the cell wall during cell division in Staphylococcus aureus using AFM to demonstrate the division of the cell and AFM-IR to record spectra showing the thickening of the septum. This work was followed by an investigation into single cells, with particular emphasis on cell-wall signatures, in several bacterial species. Specifically, mainly cell wall components from S. aureus and Escherichia coli containing complex carbohydrate and phosphodiester groups, including peptidoglycans and teichoic acid, could be identified and mapped at nanometre spatial resolution. Principal component analysis of AFM-IR spectra of six living bacterial species enabled the discrimination of Gram-positive from Gram-negative bacteria based on spectral bands originating mainly from the cell wall components. The ability to monitor in vivo molecular changes during cellular processes in bacteria at the nanoscale opens a new platform to study environmental influences and other factors that affect bacterial chemistry.

Swollen hexagonal liquid crystals as smart nanoreactors: implementation in materials chemistry for energy applications

Materials are the key roadblocks for the commercialization of energy conversion devices in fuel cells and solar cells. Significant research has focused on tuning the intrinsic properties of materials at the nanometer scale. The soft template mediated controlled fabrication of advanced nanostructured materials is attracting considerable interest due to the promising applications of these materials in catalysis and electrocatalysis. Swollen hexagonal lyotropic liquid crystals (SLCs) consist of oil-swollen surfactant-stabilized 1D, 2D or 3D nanometric assemblies regularly arranged in an aqueous solvent. Interestingly, the characteristic size of the SLCs can be controlled by adjusting the volume ratio of oil to water. The non-polar and/or polar compartments of the SLCs can be doped with guest molecules and used as nanoreactors for the synthesis of various metals (Pt, Pd, Au, etc.), conducting polymers and composite nanostructures with controlled size and shape. 1D, 2D and 3D mono- and bimetallic nanostructures of controlled composition and porosity can also be fabricated. These materials have demonstrated impressive enhancements of their electrochemical properties as compared to their bulk counterparts and have been identified as promising for further implementation in energy harvesting applications. In this review article, recent research materials are described regarding the development of functional materials with much improved performances for catalysis applications. This review addresses a brief overview of swollen hexagonal mesophases as nanoreactors, describes examples of nanostructured materials synthesized in these nanoreactors, shows several examples of the energy conversion applications in solar light harvesting, fuel cells etc. and also summarizes the associated reaction mechanisms developed in the recent literature for enhanced catalytic activity.

Visualizing and quantifying the nanoscale hydrophobicity and chemical distribution of surface modified polyethersulfone (PES) membranes

Chemical modifications bring unique properties into polymeric membranes that may have enhanced filtration or separation efficiencies, antifouling, antimicrobial activity and selectivity. However, there is a lack of nanoscale characterization of the chemical additive distribution and the impacts of chemical modifiers or additives on membrane surface properties, especially those at the nanoscale. In this study, a series of industrially relevant polyethersulfone (PES) membranes modified with poly (ethylene glycol) (PEG) and polyvinylpyrrolidone (PVP) were analysed systematically. Particularly, hydrophobicity and chemical distribution were scrutinized by atomic force microscopy (AFM) and AFM coupled with infrared analysis capability (AFM-IR) for the first time that successfully resolved nanoscale structural and chemical properties of the chemically modified PES membranes. Our results indicated the heterogeneous spatial distribution of PVP and PEG based on their characteristic IR bands and the resulting hydrophobicity distribution on modified membrane surfaces at the nanoscale. Particularly, we established a linear correlation (R² = 0.9449) between the measured adhesion force and water contact angles, which enabled the examination of local surface hydrophobicity. The PES membranes became more hydrophilic with the increasing blend of PVP and PEG. With AFM-IR, trace amounts (1-4%) of PVP could be identified sensitively on PES membranes based on their unique characteristic IR bands, which were not achieved by FTIR or IR mapping. Overall, these novel characterization approaches hold paramount importance for the design and quality control of polymer membrane modification and manufacturing.

Highly Active Multimetallic Palladium Nanoalloys Embedded in Conducting Polymer as Anode Catalyst for Electrooxidation of Ethanol

Fabrication of multimetallic nanocatalysts with controllable composition remains a challenge for the development of low-cost electrocatalysts, and incorporating metal-based catalysts into active carbon nanoarchitectures represents an emerging strategy to improve the catalytic performance of electrocatalysts. Herein, a facile method developed for Pd nanoparticle (NP)-based multimetallic alloys incorporated on polypyrrole (Ppy) nanofibers by in situ nucleation and growth of NPs using colloidal radiolytic technique is described. Electrochemical measurement suggests that the as-prepared catalysts demonstrate dramatically enhanced electrocatalytic activity for ethanol oxidation in alkaline medium. The ultrasmall Pd₃₀Pt₂₉Au₄₁/Ppy nanohybrids (∼8 nm) exhibit excellent electrocatalytic activity, which is ∼5.5 times higher than that of its monometallic counterparts (12 A/mg Pd, 5 times higher activity compared to that of Pd/C catalyst). Most importantly, the ternary nanocatalyst shows no obvious change in chemical structure and long-term stability, reflected in the 2% loss in forward current density during 1000 cycles. The superior catalytic activity and durability of the nanohybrids have been achieved due to the formation of Pt-Pd-Au heterojunctions with cooperative action of the three metals in the alloy composition, and the strong interactions between the Ppy nanofiber support with the metal NPs. The facile synthetic approach provides a new generation of polymer-supported metal alloy hybrid nanostructures as potential electrocatalysts with superior catalytic activity for fuel cell applications.

Hybrid AFM for Nanoscale Physicochemical Characterization: Recent Development and Emerging Applications

Atomic force microscopy (AFM) has evolved to be one of the most powerful tools for the characterization of material surfaces especially at the nanoscale. Recent development of AFM has incorporated a suite of analytical techniques including surface-enhanced Raman scattering (SERS) technique and infrared (IR) spectroscopy to further reveal chemical composition and map the chemical distribution. This incorporation not only elevates the functionality of AFM but also increases the resolution limitation of conventional IR and Raman spectroscopy. Despite the rapid development of such hybrid AFM techniques, many unique features, principles, applications, potential pitfalls or artifacts are not well known to the community. This review systematically summarizes the recent relevant literature on hybrid AFM principles and applications. It focuses specially on AFM-IR and AFM-Raman techniques. Various applications in different research fields are critically reviewed and discussed, highlighting the potentials of these hybrid AFM techniques. Here, the major drawbacks and limitations of these two hybrid AFM techniques are presented. The intentions of this article are to shed new light on the future research and achieve improvements in stability and reliability of the measurements.

Swollen liquid crystals (SLCs): a versatile template for the synthesis of nano structured materials

Swollen liquid crystals (SLCs) are the class of lyotropic liquid crystals (LLCs) that are usually formed by a quaternary mixture of aqueous phase, oil phase, surfactant and cosurfactant.

Nanostructured conducting polymers for energy applications: towards a sustainable platform

Recently, there has been tremendous progress in the field of nanodimensional conducting polymers with the objective of tuning the intrinsic properties of the polymer and the potential to be efficient, biocompatible, inexpensive, and solution processable. Compared with bulk conducting polymers, conducting polymer nanostructures possess a high electrical conductivity, large surface area, short path length for ion transport and superior electrochemical activity which make them suitable for energy storage and conversion applications. The current status of polymer nanostructure fabrication and characterization is reviewed in detail. The present review includes syntheses, a deeper understanding of the principles underlying the electronic behavior of size and shape tunable polymer nanostructures, characterization tools and analysis of composites. Finally, a detailed discussion of their effectiveness and perspectives in energy storage and solar light harvesting is presented. In brief, a broad overview on the synthesis and possible applications of conducting polymer nanostructures in energy domains such as fuel cells, photocatalysis, supercapacitors and rechargeable batteries is described.