Magnetic responsive mesoporous alginate/β-cyclodextrin polymer beads enhance selectivity and adsorption of heavy metal ions

Mesoporous (~7-8 nm) biopolymer hydrogel beads (HNTs-FeNPs@Alg/β-CD) were synthesised via ionic polymerisation route to separate heavy metal ions. The adsorption capacity of HNTs-FeNPs@Alg/β-CD was higher than that of raw halloysite nano tubes (HNTs), iron nanoparticles (FeNPs), and bare alginate beads. FeNPs induce the magnetic properties of adsorbent and metal-based functional groups in and around the hydrogel beads. The mesoporous surface of the adsorbent permits access of heavy metal ions onto the polymer beads to interact with internal active sites and the mesoporous polymer network. Maximum adsorption capacities of lead (Pb), copper (Cu), cadmium (Cd), and nickel (Ni) were 21.09 mg/g, 15.54 mg/g, 2.47 mg/g, and 2.68 mg/g, respectively. HNTs-FeNPs@Alg/β-CD was able to adsorb heavy metals efficiently (75-99%) under environment-relevant concentrations (200 μg/L) from mixed metal contaminants. The adsorption and selectivity trends of heavy metals were Pb > Cu > Cd > Ni, despite electrostatic binding strength of Cd > Cu > Pb > Ni and covalent binding strength of Pb > Ni > Cu > Cd. It demonstrated that not only chemosorption but also physisorption acts as the sorption mechanism. The reduction in surface area, porosity, and pore volume of the expended adsorbent, along with sorption study results, confirmed that pore filling and intra-particle diffusion played a considerable role in removing heavy metals.

Pd@Py2PZ@MSN as a Novel and Efficient Catalyst for C–C Bond Formation Reactions

In this study, a novel catalyst is introduced based on the immobilization of palladium onto dipyrido (3,2-a:2′,3′-c) phenazine–modified mesoporous silica nanoparticles. The dipyrido (3,2-a:2′,3′-c) phenazine (Py₂PZ) ligand is synthesized in a simple method from the reaction of 1,10-phenanthroline-5,6-dione and 3,4-diaminobenzoic acid as starting materials. The ligand is used to functionalize mesoporous silica nanoparticles (MSNs) and modify their surface chemistry for the immobilization of palladium. The palladium-immobilized dipyrido (3,2-a:2′,3′-c) phenazine–modified mesoporous silica nanoparticles (Pd@Py₂PZ@MSNs) are synthesized and characterized by several characterization techniques, including TEM, SEM, FT-IR, TGA, ICP, XRD, and EDS analyses. After the careful characterization of Pd@Py₂PZ@MSNs, the activity and efficiency of this catalyst is examined in carbon–carbon bond formation reactions. The results are advantageous in water and the products are obtained in high isolated yields. In addition, the catalyst showed very good reusability and did not show significant loss in activity after 10 sequential runs.

Progresses in chitin, chitosan, starch, cellulose, pectin, alginate, gelatin and gum based (nano)catalysts for the Heck coupling reactions: A review

Heck cross-coupling reaction (HCR) is one of the few transition metal catalyzed CC bond-forming reactions, which has been considered as the most effective, direct, and atom economical synthetic method using various catalytic systems. Heck reaction is widely employed in numerous syntheses including preparation of pharmaceutical and biologically active compounds, agrochemicals, natural products, fine chemicals, etc. Commonly, Pd-based catalysts have been used in HCR. In recent decades, the application of biopolymers as natural and effective supports has received attention due to their being cost effective, abundance, and non-toxicity. In fact, recent studies demonstrated that biopolymer-based catalysts had high sorption capacities, chelating activities, versatility, and stability, which make them potentially applicable as green materials (supports) in HCR. These catalytic systems present high stability and recyclability after several cycles of reaction. This review aims at providing an overview of the current progresses made towards the application of various polysaccharide and gelatin-supported metal catalysts in HCR in recent years. Natural polymers such as starch, gum, pectin, chitin, chitosan, cellulose, alginate and gelatin have been used as natural supports for metal-based catalysts in HCR. Diverse aspects of the reactions, different methods of preparation and application of polysaccharide and gelatin-based catalysts and their reusability have been reviewed.

1,2,3-Triazole framework: a strategic structure for C-H⋯X hydrogen bonding and practical design of an effective Pd-catalyst for carbonylation and carbon-carbon bond formation

1,2,3-Triazole is an interesting N-heterocyclic framework which can act as both a hydrogen bond donor and metal chelator. In the present study, C-H hydrogen bonding of the 1,2,3-triazole ring was surveyed theoretically and the results showed a good agreement with the experimental observations. The click-modified magnetic nanocatalyst Pd@click-Fe₃O₄/chitosan was successfully prepared, in which the triazole moiety plays a dual role as both a strong linker and an excellent ligand and immobilizes the palladium species in the catalyst matrix. This nanostructure was well characterized and found to be an efficient catalyst for the CO gas-free formylation of aryl halides using formic acid (HCOOH) as the most convenient, inexpensive and environmentally friendly CO source. Here, the aryl halides are selectively converted to the corresponding aromatic aldehydes under mild reaction conditions and low Pd loading. The activity of this catalyst was also excellent in the Suzuki cross-coupling reaction of various aryl halides with phenylboronic acids in EtOH/H₂O (1 : 1) at room temperature. In addition, this catalyst was stable in the reaction media and could be magnetically separated and recovered several times.

Organosulfur, organoselenium, and organotellurium ligands in the development of palladium, nickel, and copper-based catalytic systems for Heck coupling

Organosulfur, organoselenium, and organotellurium ligands in designing Pd, Ni, and Cu-based homogeneous, heterogeneous, and nanocatalytic systems for Heck coupling.

Synthesis and characterization of γ-Fe2O3@SiO2–(CH2)3–PDTC–Pd magnetic nanoparticles: a new and highly active catalyst for the Heck/Sonogashira coupling reactions

A novel catalyst is synthesized based on the immobilization of palladium on γ-Fe₂O₃@SiO₂–(CH₂)₃–PDTC nanoparticles and is used as a highly active catalyst for the Heck/Sonogashira coupling reactions.

Palladium immobilized on in situ cross-linked chitosan superfine fibers for catalytic application in an aqueous medium

Chitosan composite superfine fibers with a diameter of 321 ± 99 nm were prepared by electrospinning with PEO as the co-spinning polymer and itaconic acid as the in situ cross-linking agent.

A polystyrene supported [PdCl–(SeCSe)] complex: a novel, reusable and robust heterogeneous catalyst for the Sonogashira synthesis of 1,2-disubstituted alkynes and 1,3-enynes

PS-[PdCl–(SeCSe)] has been introduced as a novel and heterogeneous catalyst, which exhibits outstanding catalytic activity in the Sonogashira cross-coupling reactions.

Palladium nanoparticles immobilized on a magnetic chitosan-anchored Schiff base: applications in Suzuki–Miyaura and Heck–Mizoroki coupling reactions

A palladium nanocatalyst Fe₃O₄@CS-SB-Pd has been synthesized and characterized by FT-IR, XRD, XPS, FESEM, EDX, TEM, TGA, and ICP-AES analysis.

Polystyrene supported palladium nanoparticles catalyzed cinnamic acid synthesis using maleic anhydride as a substitute for acrylic acid

Maleic anhydride as a substitute for acrylic acid for cinnamic acid synthesis was explored elaborating the combined role of the support and the catalyst.

Chitosan microspheres-supported palladium species as an efficient and recyclable catalyst for Mizoroki–Heck reaction

Chitosan microsphere supported palladium catalysts prepared by electrospraying were very active and stable to catalyze the Mizoroki–Heck reaction.

Novel triazole-modified chitosan@nickel nanoparticles: efficient and recoverable catalysts for Suzuki reaction

The synthesis of triazole-modified chitosan@nickel catalyst through the click reaction of azide-functionalized chitosan with an alkynated imino-thiophene ligand for Suzuki–Miyaura coupling reactions.

Immobilized Pd(0) nanoparticles on phosphine-functionalized graphene as a highly active catalyst for Heck, Suzuki and N-arylation reactions

Phosphine functionalized graphene was used for the immobilization of Pd nanoparticles and utilized in C–C and C–N bond formation reactions.