Green antimicrobial adsorbent containing grafted xanthan gum/SiO2 nanocomposites for malachite green dye

Recently, removal of synthetic dyes, especially cationic dye of malachite green (MG), and inhibition of the growth of pathogenic microorganism from drinking water have gained much interest due to their high toxic potency for aquatic biosystems. Herein, a new dye adsorbent with outstanding antibacterial activity was fabricated based on xanthan gum (XG) and SiO₂ nanoparticles through ultrasonication followed by the crosslinking polymerization with vinyl imidazole monomer. The nano adsorbents were characterized with various techniques such as FTIR, XRD, SEM, EDX, and TEM. The nanocomposites were applied as a filter for discarding MG dye and killing the growth of bacterial strains such as E.coli and S.aureus which are considered as the common impurities for drinking water. The data revealed that a maximum adsorption capacity was recorded as 99.5% (Q_max = 588.2 mg/g) at optimum conditions including 10 mg nanocomposite, 10 mL of MG dye (450 ppm), pH = 7, the temperature of 30 °C, and the adsorption time was adjusted within 6 h. The process of dye adsorption was applied to the common isotherm models of Langmuir, Temkin, and Freundlich, and the findings showed that the adsorption behavior was well fitted with the Langmuir one (R² = 0.9983). Moreover, different adsorption kinetic models such as pseudo-first order, pseudo-second order, and intra-particle diffusion were studied for understanding the mechanism of MG adsorption onto nanocomposite surface. It was found that both intraparticle diffusion and pseudo-first-order have participated evenly in the adsorption mechanism of MG dye. Ultimately, the as-prepared nanocomposites were tested against the growth of S. aureus, and E.coli manifesting a superior inhibition diameter as 23.5 ± 0.50, and 25.33 ± 0.47 mm against E.coli, and S. aureus, respectively. Therefore, our new XG-g-PVI/SiO₂ adsorbent is a very promising adsorbent for the fast and efficient capture of dyes from aqueous solutions.

Poly(N-vinyl imidazole) Cross-Linked β-Cyclodextrin Hydrogel for Rapid Hemostasis in Severe Renal Arterial Hemorrhagic Model

A unique facile process has been adopted for fast assembly of a poly(N-vinyl imidazole) cross-linked β-cyclodextrin hydrogel through microwave-assisted free radical polymerization, using N,N'-methylenebis(acrylamide) cross-linker. The copolymer possesses positive surface charge, one of the characteristic properties of an ideal hemostatic hydrogel. The functionalized imidazole-based hydrogel demonstrates rapid, superior blood coagulation kinetics under in vitro and in vivo conditions. On application to a major renal arterial hemorrhagic model, this hydrogel shows better blood clotting kinetics, leading to complete hemostasis in as few as ∼144 ± 7 s. Additionally, 350 μL of whole blood was clotted instantly, in ∼35 s, and therefore, reinforcing its hemostatic potential. The hydrogel demonstrates excellent biocompatibility, when seeded with human dermal fibroblast cells, retaining the native property of its predecessor. In addition, the hydrogel presents excellent hemocompatibility when tested with whole blood with the highest hemolytic ratio of 1.07 ± 0.05%. Moreover, it also demonstrates potential as a carrier for sustained release of an anesthetic drug, lidocaine hydrochloride monohydrate (∼83% in 24 h). The rapid hemostatic behavior of the hydrogel is coupled with its cytocompatibility and hemocompatibilty properties along with controlled drug release characteristics. These behaviors evidently demonstrate it to be an excellent alternative for a superior hemostatic material for severe hemorrhagic conditions.

Innovative bactericidal adsorbents containing modified xanthan gum/montmorillonite nanocomposites for wastewater treatment

Herein, we reported the preparation of novel antibacterial nanocomposites based on biodegradable polymers. The nanocomposites were applied as capable adsorbent for removing of malachite green (MG) dye, as well as inhibiting of E. coli and S. aureus growth as the most common pollutants for water. The grafted xanthan gum with poly(vinylimidazole) (XG-g-PVI) nanocomposites were synthesized in the presence of different Montmorillonite (MMT) nanoclays concentrations (1%, 3% and 5%). The prepared modified XG nanocomposites were detected through XRD, SEM-EDX, FTIR and TEM. The maximum adsorption MG capacity was determined as 99.99% (909.1 mg/g) in basic medium at 30 °C for 90 min. The adsorption isotherm for removal of MG dye was studied against different models like Langmuir, Freundlich, Temkin, FloryHuggins isotherm models, however, the adsorption results were good fitted with Langmuir isotherm model (R² = 0.9942). Additionally, various adsorption kinetic models: pseudo-first order, second order, pseudo-second order, and intra-particle diffusion models were studied for adsorption mechanism of MG dye on top of prepared nanocomposite surface. Finally, the antibacterial activity outcomes displayed that the prepared XG-g-PVI/MMT nanocomposites had excellent inhibition growth for bacteria and the antibacterial activity increased abruptly with the increased of MMT nanoclay concentrations.

Structural design of microbicidal cationic oligomers and their synergistic interaction with azoles against Candida albicans

Membrane-disrupting synthetic antimicrobial polymers have been well developed as antimicrobial peptide (AMP) mimics to mitigate antimicrobial resistance (AMR). However, synthetic polymers possess inherent drawbacks, being a mixture of different chain lengths, which restricts their clinical applications. In fact, synthetic oligomers with defined chain length and molecular structure could be better representatives of AMPs. Herein, a series of novel imidazolium-ammonium oligomers developed in this work exhibit excellent broad spectrum antimicrobial activity, specifically the salient structure dependent high efficiency against C. albicans. Moreover, synergistic effect emerged when the combined azoles and synthetic oligomers were applied against C. albicans. The detail structural coupling between azoles and oligomers was scrutinized through molecular dynamics simulations to unravel the interaction details with the atomistic resolution. The labile interaction between oligomer and azoles facilitated the transfer of drug into fungal cells, which can be a synergistic solution to prevent the development of resistance on C. albicans.

Mesoporous Silica-Based Materials with Bactericidal Properties

Bacterial infections are the main cause of chronic infections and even mortality. In fact, due to extensive use of antibiotics and, then, emergence of antibiotic resistance, treatment of such infections by conventional antibiotics has become a major concern worldwide. One of the promising strategies to treat infection diseases is the use of nanomaterials. Among them, mesoporous silica materials (MSMs) have attracted burgeoning attention due to high surface area, tunable pore/particle size, and easy surface functionalization. This review discusses how one can exploit capacities of MSMs to design and fabricate multifunctional/controllable drug delivery systems (DDSs) to combat bacterial infections. At first, the emergency of bacterial and biofilm resistance toward conventional antimicrobials is described and then how nanoparticles exert their toxic effects upon pathogenic cells is discussed. Next, the main aspects of MSMs (e.g., physicochemical properties, multifunctionality, and biosafety) which one should consider in the design of MSM-based DDSs against bacterial infections are introduced. Finally, a comprehensive analysis of all the papers published dealing with the use of MSMs for delivery of antibacterial chemicals (antimicrobial agents functionalized/adsorbed on mesoporous silica (MS), MS-loaded with antimicrobial agents, gated MS-loaded with antimicrobial agents, MS with metal-based nanoparticles, and MS-loaded with metal ions) is provided.

pH-Degradable imidazolium oligomers as antimicrobial materials with tuneable loss of activity

Imidazolium oligomers containing pH-sensitive linkers degrade under basic conditions to less active fragments that slow the development of bacterial resistance.

Zinc Ion Coordinated Poly(Ionic Liquid) Antimicrobial Membranes for Wound Healing

Herein, a series of quaternary ammonium (Qa) or imidazolium (Im) cation-based poly(ionic liquid) (PIL) membranes and their corresponding zinc ion coordinated PIL membranes were synthesized. The effects of chemical structure, including organic cations, alkyl side chain of substitution, and zinc atoms on the antimicrobial activities against Escherichia coli, Staphylococcus aureus, and Candida albicans were investigated. The Zn-containing PIL membranes show higher antibacterial activities compared to those of pristine PIL membranes due to the synergistic attributes of both organic cations (Qa or Im) and zinc atoms. A wound healing test using methicillin-resistant S. aureus infected mouse as the model further demonstrated that zinc ion coordinated PIL membranes were antibacterially active, biologically safe, and may have potential application as an antimicrobial wound dressing in a clinical setting.

Functionalization of nanostructures for antibiotic improvement: an interdisciplinary approach

The resistance of infectious bacteria to current antibiotics is a worldwide problem caused, partially, by the overuse of antimicrobials. The use of nanotechnology as an innovative tool against bacterial infections provides a range of methodologies to redesign old antibiotics for novel and remarkable new strategies. Thus, functionalized antibiotics present structures with improved bioavailability, low toxicity and specificity to bacterial membrane. In this context, this review will describe the use of nanotechnology as an innovative tool to functionalize antibiotics. In addition, the importance of the interdisciplinary context to understand, develop and apply these systems as an innovative tool for drug development and improvement is discussed.