Cooperative assembly of redistributed arylgermanium-bearing alkoxysilanes in a mesostructured siloxane network

Three redistributed arylgermanium-bearing mono-, bis- and tris-triethoxysilyl arms were designed, cocondensed with TEOS to access SBA-15-type materials and embedded in chitosan to prepare functional bioplastics.

Gold nanoparticles grown on a hydrophobic and texturally tunable PDMS-like framework

A sol-gel analogue of PDMS was used to built hydrophobic siloxane supports, while confining gold nanoparticles.

Nanostructured Polymethylsiloxane/Fumed Silica Blends

Polymethylsiloxane (PMS) and fumed silica, alone and in a blended form (1:1 w/w), differently pretreated, hydrated, and treated again, were studied using TEM and SEM, nitrogen adsorption-desorption, ¹H MAS and ²⁹Si CP/MAS NMR spectroscopy, infrared spectroscopy, and methods of quantum chemistry. Analysis of the effects of adding water (0-0.5 g of water per gram of solids) to the blends while they are undergoing different mechanical treatment (stirring with weak (~1-2 kg/cm²) and strong (~20 kg/cm²) loading) show that both dry and wetted PMS (as a soft material) can be grafted onto a silica surface, even with weak mechanical loading, and enhanced mechanical loading leads to enhanced homogenization of the blends. The main evidence of this effect is strong nonadditive changes in the textural characteristics, which are 2-3 times smaller than additive those expected. All PMS/nanosilica blends, demonstrating a good distribution of nanosilica nanoparticles and their small aggregates in the polymer matrix (according to TEM and SEM images), are rather meso/microporous, with the main pore-size distribution peaks at R > 10 nm in radius and average <R_V> values of 18-25 nm. The contributions of nanopores (R < 1 nm), mesopores (1 nm < R < 25 nm), and macropores (25 nm < R < 100 nm), which are of importance for studied medical sorbents and drug carriers, depend strongly on the types of the materials and treatments, as well the amounts of water added. The developed technique (based on small additions of water and controlled mechanical loading) allows one to significantly change the morphological and textural characteristics of fumed silica (hydrocompaction), PMS (drying-wetting-drying), and PMS/A-300 blends (wetting-drying under mechanical loading), which is of importance from a practical point of view.

Polymethylsiloxane alone and in composition with nanosilica under various conditions

Disperse polymethylsiloxane (PMS) alone and in a mixture with highly disperse nanosilica A-300 was studied as a dry powder and a hydrogel located in various dispersion media (air, chloroform alone and with addition of trifluoroacetic acid) using low-temperature ¹H NMR spectroscopy, cryoporometry, thermogravimetry, nitrogen adsorption, microscopy, infrared spectroscopy, and quantum chemistry. The powders of dried PMS and PMS/A-300 can be easily rehydrated upon strong stirring with added water. The slurry properties depend on mechanical treatment features due to stronger compaction of the secondary structures with increasing mechanical loading. The organization of bound water (at a constant hydration degree h = 1 g/g) depends strongly on the dispersion media (because chloroform can displace water from narrow interparticle voids into broader ones or into pores inaccessible for larger CDCl₃ molecules) and mechanical loading reorganizing aggregates of PMS and A-300 nanoparticles (<1 μm in size) and agglomerates (>1 μm) of aggregates. The PMS/nanosilica blends could be of interest from a practical point of view due to additional control of the textural and structural characteristics determining efficiency of sorbents with respect to low- and high-molecular weight compounds depending on the dispersion media that is of importance, e.g., for medical applications.

Syntheses and applications of periodic mesoporous organosilica nanoparticles

Periodic Mesoporous Organosilica (PMO) nanomaterials are envisioned to be one of the most prolific subjects of research in the next decade. Similar to mesoporous silica nanoparticles (MSN), PMO nanoparticles (NPs) prepared from organo-bridged alkoxysilanes have tunable mesopores that could be utilized for many applications such as gas and molecule adsorption, catalysis, drug and gene delivery, electronics, and sensing; but unlike MSN, the diversity in chemical nature of the pore walls of such nanomaterials is theoretically unlimited. Thus, we expect that PMO NPs will attract considerable interest over the next decade. In this review, we will present a comprehensive overview of the synthetic strategies for the preparation of nanoscaled PMO materials, and then describe their applications in catalysis and nanomedicine. The remarkable assets of the PMO structure are also detailed, and insights are provided for the preparation of more complex PMO nanoplatforms.