Alumina-Based Bifunctional Catalyst for Efficient CO2 Fixation into Epoxides at Atmospheric Pressure

The quest toward sustainability and decarbonization demands the development of methods for efficient carbon dioxide capture and utilization. The nonreductive CO₂ fixation into epoxides to prepare cyclic carbonates has gained attention in recent years. In this work, we report the development of guanidine hydrochloride-functionalized γ alumina (γ-Al₂O₃), prepared using green solvents, as an efficient bifunctional catalyst for CO₂ fixation. The resulting guanidine-grafted γ-Al₂O₃ (Al-Gh) proved to be an excellent catalyst to prepare cyclic carbonates from epoxides and CO₂ with high selectivity. The nitrogen-rich Al-Gh shows increased CO₂ adsorption capacity compared to that of γ-Al₂O₃. The as-prepared catalyst was able to carry out CO₂ fixation at 85 °C under atmospheric pressure in the absence of solvents and external additives (e.g., TBAI or KI). The material showed negligible loss of catalytic activity even after five cycles of catalysis. The catalyst successfully converted many epoxides into their respective cyclic carbonates under the optimized conditions. The gram-scale synthesis of commercially important styrene carbonates from styrene oxide and CO₂ using Al-Gh was also achieved. Density functional theory (DFT) calculations revealed the role of alumina in activating the epoxide. This activation facilitated the chloride ion to open the ring to react with CO₂. The DFT studies also validated the role of alumina in stabilizing the electron-rich intermediates during the course of the reaction.

Ethylene glycol-mediated one-pot synthesis of Fe incorporated α-Ni(OH)2 nanosheets with enhanced intrinsic electrocatalytic activity and long-term stability for alkaline water oxidation

Sustainable electrocatalytic water splitting stipulates the development of cheap, efficient and stable electrocatalysts to promote comparatively sluggish oxygen evolution reaction. We have synthesized iron-incorporated pure phase α-nickel hydroxide, Ni0.8Fe0.2(OH)2 electrocatalyst utilizing N,N,N',N'-Tetramethylethane-1,2-diamine (TMEDA) and ethylene glycol (EG) following a simple one-pot synthesis process. PXRD and FTIR data suggest that the intercalation of EG in the interlayer spacing promotes amorphousness of the material. FESEM and TEM analyses suggest that the catalyst possesses hierarchical sheet-like morphology and BET measurements indicated the surface area of 50 m2 g-1 with high mesoporosity. Electrochemical studies suggest that Ni0.8Fe0.2(OH)2 prepared using water-EG mixture is the most efficient electrocatalyst for OER activity as it requires only 258 mV overpotential (considering backward LSV) on a glassy carbon electrode to achieve the benchmark current density of 10 mA cm-2geo. Additionally, the catalyst shows remarkable long-term stability for up to 7 days. The efficiency of Ni0.8Fe0.2(OH)2 electrocatalyst is reflected in its low Tafel slope (43 mV dec-1) and high OER faradaic efficiency (93%). The enhanced activity is attributed to the increase in the interlayer spacing due to the intercalation of EG into the material, which facilitates the transport of ions during the OER process. The overall improved catalytic property is due to the enhanced ionic mobility, controllable textural property, higher per-site activity and increased conductivity for the Ni0.8Fe0.2(OH)2 catalytic network.

Gold incorporated hematite nanocatalyst for solvent-free CO2 fixation under atmospheric pressure

Au/α-Fe₂O₃ as a nanocatalyst for the conversion of epoxides to cyclic carbonates utilizing CO₂ under 1 atm. pressure.

Phyto-Nanocatalysts: Green Synthesis, Characterization, and Applications

Catalysis represents the cornerstone of chemistry, since catalytic processes are ubiquitous in almost all chemical processes developed for obtaining consumer goods. Nanocatalysis represents nowadays an innovative approach to obtain better properties for the catalysts: stable activity, good selectivity, easy to recover, and the possibility to be reused. Over the last few years, for the obtaining of new catalysts, classical methods—based on potential hazardous reagents—have been replaced with new methods emerged by replacing those reagents with plant extracts obtained in different conditions. Due to being diversified in morphology and chemical composition, these materials have different properties and applications, representing a promising area of research. In this context, the present review focuses on the metallic nanocatalysts’ importance, different methods of synthesis with emphasis to the natural compounds used as support, characterization techniques, parameters involved in tailoring the composition, size and shape of nanoparticles and applications in catalysis. This review presents some examples of green nanocatalysts, grouped considering their nature (mono- and bi-metallic nanoparticles, metallic oxides, sulfides, chlorides, and other complex catalysts).

Inception of molybdate as a "pore forming additive" to enhance the bifunctional electrocatalytic activity of nickel and cobalt based mixed hydroxides for overall water splitting

Development of low-cost transition metal based electrocatalysts on inexpensive substrates for overall water splitting is essential to meet the future energy storage demand. In this article, we have synthesized a molybdate incorporated nickel cobalt hydroxide material on Cu mesh with nickel : cobalt : molybdenum in a 13.25 : 21.42 : 1 ratio and the electrode has shown excellent bifunctional electrocatalytic activity as it demonstrates overpotentials as low as 290 mV and 125 mV to reach 10 mA cm-2geo for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively (after both iR and capacitance correction). Control studies with fourteen other nickel-cobalt based hydroxides and rigorous post-catalytic analysis suggested that though molybdate was not the active catalytic centre, it played a pivotal role in enhancing the activity of the material as - (i) it significantly improved the surface area and porosity of the as-synthesized material and (ii) owing to its continuous etching during electrochemical testing, it was found to increase the accessibility of electrochemically active catalytic sites lying in the bulk. Thus, molybdate acts as a "pore forming additive" during both synthesis and electrochemical treatment. Furthermore, the combination of nickel and molybdate helped in the formation of a 2D-sheet like morphology which in turn improves accessibility to catalytically active centres. In addition, the Cu mesh substrate notably lowers the charge transfer resistance. To the best of our knowledge, this is the first ever report of molybdate as a "pore forming additive" and will enthuse the designing of electrocatalytic materials with enhanced performance based on this strategy.

Metallic CuNPs confined in hollow silicalite-1: excellent catalytic efficiency in p-nitrophenol reduction

Metallic CuNPs (10–40 nm) confined in a hollow silicalite-1 zeolite showed excellent catalytic activities for the reduction of 4-NP to 4-AP with an apparent rate constant value of 5.6 × 10⁻³ s⁻¹.

Hierarchical hollow collapsed kippah-shaped silicalite-1 with a controllable bimodal pore system by an emulsion based steam assisted conversion approach

Hollow collapsed kippah-shaped silicalite-1 was synthesized by an emulsion based steam assisted conversion (ESAC) method exhibiting hierarchical porosity.

Rapid template-free synthesis of an air-stable hierarchical copper nanoassembly and its use as a reusable catalyst for 4-nitrophenol reduction

A hierarchical copper nanoassembly was synthesized by solvothermal treatment at 150 °C for 2 h in the absence of any templating agents, and exhibited excellent air-stability, antioxidative properties and catalytic reduction of 4-nitrophenol.