Enhanced photoresponse in dye-sensitized solar cells via localized surface plasmon resonance through highly stable nickel nanoparticles

Low-Cost and Efficient Nickel Nitroprusside/Graphene Nanohybrid Electrocatalysts as Counter Electrodes for Dye-Sensitized Solar Cells

Novel nickel nitroprusside (NNP) nanoparticles with incorporated graphene nanoplatelets (NNP/GnP) were used for the first time as a low-cost and effective counter electrode (CE) for dye-sensitized solar cells (DSSCs). NNP was synthesized at a low-temperature (25 °C) solution process with suitable purity and crystallinity with a size range from 5 to 10 nm, as confirmed by different spectroscopic and microscopic analyses. The incorporation of an optimized amount of GnP (0.2 wt%) into the NNP significantly improved the electrocatalytic behavior for the redox reaction of iodide (I-)/tri-iodide (I3-) by decreasing the charge-transfer resistance at the CE/electrolyte interface, lower than the NNP- and GnP-CEs, and comparable to the Pt-CE. The NNP/GnP nanohybrid CE when applied in DSSC exhibited a PCE of 6.13% (under one sun illumination conditions) with the Jsc, Voc, and FF of 14.22 mA/cm2, 0.628 V, and 68.68%, respectively, while the PCE of the reference Pt-CE-based DSSC was 6.37% (Jsc = 14.47 mA/cm2, Voc = 0.635 V, and FF = 69.20%). The low cost of the NNP/GnP hybrid CE with comparable photovoltaic performance to Pt-CE can be potentially exploited as a suitable replacement of Pt-CE in DSSCs.

Improved control on the morphology and LSPR properties of plasmonic Pt NPs through enhanced solid state dewetting by using a sacrificial indium layer

Platinum (Pt) nanoparticles (NPs) are important nano-material components in various catalytic, photonic and electronic applications, yet face challenges in the fabrication of desired morphology and uniformity with the conventional solid-state dewetting approach. Specifically, the necessity of high annealing temperatures, typically above 800 °C due to the low diffusivity of Pt atoms, limits the morphological and functional tunability of Pt NPs. In this work, the fabrication of Pt NPs with an improved configuration, spacing and uniformity is demonstrated through the enhancement of solid state dewetting by using a sacrificial indium (In) layer on sapphire (0001). The well-defined Pt NPs demonstrate the dynamic localized surface plasmon (LSPR) bands in the visible range between ∼400 and 700 nm depending on the size and spacing of NPs. The LSPR peak intensity and width are also varied depending on the uniformity of Pt NPs. The overall dewetting magnitude is significantly enhanced through the inter-mixing of In and Pt atoms at the In/Pt interface that eventually results in the formation of an In–Pt alloy. During the dewetting process the In atoms desorb from the NP matrix by atomic sublimation, which gives rise to pure Pt NP fabrication. In sharp contrast to the pure Pt film dewetting, the Pt NPs in this approach demonstrate significantly improved spatial arrangement with well-defined configuration and uniformity. In addition, the ratio of In can be readily controlled along with the thickness of the Pt layer to alter the dewetting kinetics and thereby the surface morphology of Pt NPs. Specifically, large hexagonal, semi-spherical and small hexagonal Pt NPs are obtained through the dewetting of In_{75 nm}/Pt_{25 nm}, In_{20 nm}/Pt_{20 nm} and In_{2.5 nm}/Pt_{7.5 nm} bilayers respectively.

Fabrication of Pt NPs with the improved configuration, spacing, uniformity and localized surface plasmon resonance (LSPR) response is demonstrated.

Plasmonic core-shell nanostructure as an optical photoactive nanolens for enhanced light harvesting and hydrogen production

Hydrogen production using plasmonic photocatalyst has attracted increasing attention since it improves light harvesting and photoefficiency. Herein, we have designed a plasmonic photocatalyst in a core-shell nanostructure that enabled an improvement of light harvesting and photocatalytic production of hydrogen using a very low amount of gold nanoparticles. The core-shell nanostructure was found to mimic the focusing of light observed for the lens-like epidermal cells. Thus, the core-shell nanostructure acts as a convex nanolens to reinforce the electromagnetic field at the nanostructure surface. The electric field was also found to be enhanced, which improves the energy absorbed for gold particles located in the core-shell nanostructure. Thus, by adjusting the diameter of the core-shell nanostructure, an optimal intensity for the localized surface plasmon resonance of gold was obtained. Tuning the size of the core-shell nanostructure enabled to improve the absorption at the reactive surface, thus increasing the photocatalytic hydrogen production efficiency by 5-fold.

Influence of particle size and dielectric environment on the dispersion behaviour and surface plasmon in nickel nanoparticles

Nickel nanoparticles (NPs) are promising candidates for various applications, including biomedical ones, as they have good magnetic properties as well as high thermal conductivity. We used well-characterized Ni NPs of average Scherrer sizes from 1.31 nm to 22.23 nm and investigated the effects of the primary particle size, size distribution and dielectric environments, and of separately adding non-ionic polyvinylpyrrolidone (PVP), cationic cetyltrimethylammonium bromide (CTAB) and anionic ethylenediaminetetraacetic acid (EDTA) in ethanol, on their stability and agglomeration behaviour using atomic force microscopy (AFM), particle size analysis and zeta potential study through dynamic light scattering (DLS) combined with UV-visible spectroscopy data. The dominant influence of surfactants, additives, particles size and shape on the surface plasmon resonance (SPR) was found. SPR is considerably sensitive to the dielectric environment in addition to size and shape. Moreover, increasing the concentration of PVP led to an enhanced SPR intensity and a shift in its position towards higher wavelength. 1.31 nm NPs with EDTA as an additive yielded the best dispersibility and also showed superparamagnetic behaviour at 300 K, indicating their favourable application potentials.

Chemical Ni-C Bonding in Ni-Carbon Nanotube Composite by a Microwave Welding Method and Its Induced High-Frequency Radar Frequency Electromagnetic Wave Absorption

In this work, a microwave welding method has been used for the construction of chemical Ni-C bonding at the interface between carbon nanotubes (CNTs) and metal Ni to provide a different surface electron distribution, which determined the electromagnetic (EM) wave absorption properties based on a surface plasmon resonance mechanism. Through a serial of detailed examinations, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectrum, the as-expected chemical Ni-C bonding between CNTs and metal Ni has been confirmed. And the Brunauer-Emmett-Teller and surface zeta potential measurements uncovered the great evolution of structure and electronic density compared with CNTs, metal Ni, and Ni-CNT composite without Ni-C bonding. Correspondingly, except the EM absorption due to CNTs and metal Ni in the composite, another wide and strong EM absorption band ranging from 10 to 18 GHz was found, which was induced by the Ni-C bonded interface. With a thinner thickness and more exposed Ni-C interfaces, the Ni-CNT composite displayed less reflection loss.

Microwave-solvothermal synthesis of various TiO2 nano-morphologies with enhanced efficiency by incorporating Ni nanoparticles in an electrolyte for dye-sensitized solar cells

A novel systematic approach is demonstrated to enhance the efficiency of dye-sensitized solar cells by impregnating Ni-nanoparticles into I⁻/I₃⁻ electrolyte with various TiO₂ nanomorphologies-based photo-anodes synthesized via microwave-solvothermal process.