Colloidal quantum dot lasers built on a passive two-dimensional photonic crystal backbone

Photonic crystal backbone for light trapping inside an ultrathin, low absorbing layer

A few tens of nanometre thick ultrathin materials may suffer from a very low absorption at their band edges. In this work, we investigate a photonic crystal (PC) made of a lowcost, transparent patterned silicon nitride (SiN_x) layer, conformally covered with an ultrathin active layer (e.g., 20 nm TiO₂) in view of its use in various applications such as photocatalysis. A fair estimation of the absorption enhancement, considering the volume of the active material, is calculated using RCWA. A remarkable enhancement (more than ten-folds) in absorptance in the near UV range and a very high transmittance over the visible range are observed. A detailed modal analysis of the structures-of-interest unravels the Light Trapping (LT) mechanisms and allows the derivation of key design guidelines. Optical measurements on a patterned sample provide a first proof-of-concept of such possible photonic backbone structures suitable for highly efficient depollution and artificial photosynthesis for solar fuels production.

Integration of Colloidal Quantum Dots with Photonic Structures for Optoelectronic and Optical Devices

Colloidal quantum dot (QD), a solution-processable nanoscale optoelectronic building block with well-controlled light absorption and emission properties, has emerged as a promising material system capable of interacting with various photonic structures. Integrated QD/photonic structures have been successfully realized in many optical and optoelectronic devices, enabling enhanced performance and/or new functionalities. In this review, the recent advances in this research area are summarized. In particular, the use of four typical photonic structures, namely, diffraction gratings, resonance cavities, plasmonic structures, and photonic crystals, in modulating the light absorption (e.g., for solar cells and photodetectors) or light emission (e.g., for color converters, lasers, and light emitting diodes) properties of QD-based devices is discussed. A brief overview of QD-based passive devices for on-chip photonic circuit integration is also presented to provide a holistic view on future opportunities for QD/photonic structure-integrated optoelectronic systems.

Tunable colloidal quantum dot distributed feedback lasers integrated on a continuously chirped surface grating

We report a colloidal quantum dot (CQD) distributed feedback (DFB) laser structure containing a chirped grating. The device exhibits single-mode DFB lasing, of which the wavelength is spatially dispersed in a single chip. A period-chirped surface grating is fabricated using a modified Lloyd-type laser interference lithography setup, where a flat Lloyd's mirror is replaced with a concave one. A dense red-emitting CdSe/CdS/ZnS CQD film is prepared on a temporary substrate by spin-coating, which is subsequently released and wet-transferred onto a period-chirped quartz surface grating. Upon optical excitation, the fabricated DFB laser device lases in a single mode at a laser threshold of ∼400 μJ cm-2, with its lasing wavelength shifted linearly (in proportion to the grating pitch) along the chirp direction from 613.4 nm to 623.2 nm over a distance of ∼5.6 mm.

Fluorescent Aptamer Immobilization on Inverse Colloidal Crystals

In this paper, we described a versatile two steps approach for the realization of silica inverse opals functionalized with DNA-aptamers labelled with Cy3 fluorophore. The co-assembly method was successfully employed for the realization of high quality inverse silica opal, whilst the inverse network was functionalized via epoxy chemistry. Morphological and optical assessment revealed the presence of large ordered domains with a transmission band gap depth of 32%, after the functionalization procedure. Finite Difference Time-Domain (FDTD) simulations confirmed the high optical quality of the inverse opal realized. Photoluminescence measurements evidenced the effective immobilization of DNA-aptamer molecules labelled with Cy3 throughout the entire sample thickness. This assumption was verified by the inhibition of the fluorescence of Cy3 fluorophore tailoring the position of the photonic band gap of the inverse opal. The modification of the fluorescence could be justified by a variation in the density of states (DOS) calculated by the Plane Wave Expansion (PWE) method. Finally, the development of the aforementioned approach could be seen as proof of the concept experiment, suggesting that this type of system may act as a suitable platform for the realization of fluorescence-based bio-sensors.

A thin CdSe shell boosts the electron transfer from CdTe quantum dots to methylene blue

CdTe core and CdTe/CdSe core/shell quantum dots (QD) are investigated with steady state and time-resolved spectroscopic methods. The coating of the CdTe core with a 0.7 nm thick CdSe shell shifts the lowest exciton absorption band to the red by more than 70 nm making the CdTe/CdSe QD an interesting candidate for application in solar energy conversion. Femtosecond transient absorption measurements are applied to study the photoinduced electron transfer (ET) to the molecular acceptor methylene blue (MB). ET times after single excitation of the QD are determined for different MB : QD ratios. The ET reaction is significantly faster in the case of the MB-CdTe/CdSe QD complexes, indicative of an altered charge distribution in the photoexcited heterostructure with a higher electron density in the CdSe shell. As a result of the efficient absorption of incoming light and the faster ET reaction, the amount of reduced MB in the time resolved experiments is higher for CdTe/CdSe QD compared to CdTe QD.

A colloidal quantum dot photonic crystal phosphor: nanostructural engineering of the phosphor for enhanced color conversion

Phosphors, long-known color-converting photonic agents, are gaining increasing attention owing to the interest in white LEDs and related applications. Conventional material-based approaches to phosphors focus on obtaining the desired absorption/emission wavelengths and/or improving quantum efficiency. Here, we report a novel approach for enhancing the performance of phosphors: structural modification of phosphors. We incorporated inorganic colloidal quantum dots (CQDs) into a lateral one-dimensional (1D) photonic crystal (PhC) thin-film structure, with its photonic band-edge (PBE) modes matching the energy of 'excitation photons' (rather than 'emitted photons', as in most other PBE application devices). At resonance, we observed an approximately 4-fold enhancement of fluorescence over the reference bulk phosphor, which reflects an improved absorption of the excitation photons. This nano-structural engineering approach is a paradigm shift in the phosphor research area and may help to develop next-generation higher efficiency phosphors with novel characteristics.

Plasmonic gold nanodiscs fabricated into a photonic-crystal nanocavity

We fabricate and characterise an optical structure consisting of a photonic crystal L3 nanocavity containing two gold nanodisks placed close to a field antinode. We use finite difference time domain (FDTD) modelling to show that the optical properties of the nanocavity are sensitive to the physical separation between the gold nanodisks, and that at reduced separation, the q-factor of a cavity mode polarised parallel to the dimer long-axis is reduced, indicating coupling between the cavity mode and a localised plasmon. Preliminary experimental measurements indeed indicate a damping of the cavity mode in the presence of the dimer; a result consistent with the FDTD modelling. Such a scheme may be used to integrate plasmonic systems into all-optical photonic circuits.