Why Do Ionic Surfactants Significantly Alter the Chemiluminogenic Properties of Acridinium Salt?

Acridinium esters, due to their capability for chemiluminescence (CL), are employed as indicators and labels in biomedical diagnostics and other fields. In this work, the influence of ionic surfactants, hexadecyltrimethylammonium chloride and bromide (CTAC and CTAB, cationic) and sodium dodecyl sulphate (SDS, anionic) on the CL parameters and mechanism of representative emitter, 10-methyl-9-[(2-methylphenoxy)carbonyl]acridinium trifluoromethanesulphonate (2MeX) in a H2O2/NaOH environment, is studied. Our investigations revealed that the type of surfactant and its form in solution have an impact on the CL kinetic constants and integral efficiencies, while changes in those emission properties resulting from the type of ion (Cl- vs. Br-) are negligible. The major changes were recorded for systems containing surfactants at concentrations higher than the critical micelle concentration. The cationic surfactants (CTAC, CTAB) cause a substantial increase in CL emission kinetics and a moderate increase in its integral efficiency. At the same time, the opposite effect is observed in the case of SDS. Molecular dynamics simulations suggest that changes in emission parameters are likely due to differences in the binding strength of 2MeX substrate with surfactant molecules, which is higher for SDS than for CTAC. The results can help in rational designing of optimal acridinium CL systems and demonstrate their usefulness in distinguishing the pre- and post-micellar environment and the charge of surfactants.

Synthesis of 9-(substituted phenoxycarbonyl)-10-methylacridinium trifluoromethanesulfonates: Effects of the leaving group on chemiluminescent properties

Various 9-(substituted phenoxycarbonyl)-10-methylacridinium trifluoromethanesulfonates possessing electron-withdrawing substituents have been synthesized. The effect of substituents on the stability of the acridinium esters (AEs) at various temperatures in different buffers and the chemiluminescent properties have been examined. There was little correlation between the chemiluminescent properties of AEs and the pKa values of their associated phenols, but the steric effects of the ortho-substituents in the phenoxy group, as well as their electron-withdrawing natures, seem to play an important role in determining the properties. In general, when two identical substituents are present in the 2- and 6-positions, the compound is significantly more stable than when only a single substituent is present, presumably because of greater steric hindrance from the second group. The exception is the 2,6-difluorophenyl ester, which is less stable than the 2-fluorophenyl ester, presumably because the fluoro group is small. Addition of a third electron-withdrawing substituent at the 4-position, where it has no steric influence, typically increases susceptibility to decomposition. The presence of a nitro group has a significant destabilizing effect on AEs. Of the AEs studied, the 4-chlorophenyl ester showed the greatest chemiluminescent yield, while the 2-iodo-6-(trifluoromethyl)phenyl ester group showed the greatest stability in low pH buffers.

Synthesis and chemiluminescent characteristics of two new acridinium esters

Two new acridinium esters with a 2-(succinimidyloxycarbonyl)ethyl side arm, namely, 9-(2,6-dibromophenoxycarbonyl)-10-methyl-2-(2-(succinimidyloxycarbonyl)ethyl)acridinium trifluoromethanesulfonate and 9-(4-(2-(succinimidyloxycarbonyl)ethyl)phenoxycarbonyl)-2,7-dimethoxy-10-methylacridinium triflate, have been produced and characterized. The chemiluminescent properties and hydrolytic stabilities of the new acridinium esters have been investigated.

What Other Than Acridinium Esters? Computational Search for New Acridinium-Based Chemiluminogens

The rapid increase in disease prevalence in the world makes it extremely important to search for new or develop existing diagnostic methods, for example, chemiluminescent labeling used in immunodiagnostics. At present, acridinium esters are willingly used as chemiluminogenic fragments of labels. However, the search for new chemiluminogens that are particularly efficient is the main task of our studies. The density functional theory (DFT) and time-dependent (TD) DFT methods were used to obtain thermodynamic and kinetic results concerning the chemiluminescence and competitive dark reactions, which indicated whether some of the scrutinized derivatives have better characteristics than the chemiluminogens used so far. Synthesis of these candidates for efficient chemiluminogens, followed by studies of their chemiluminescent properties, and ultimately in chemiluminescent labeling, are further steps to confirm their potential applicability in immunodiagnostics.

Synthesis, structure elucidation, and chemiluminescent activity of new 9-substituted 10-(ω-(succinimidyloxycarbonyl)alkyl)acridinium esters

Several new acridinium esters 2-9 having their central acridinium ring bearing a 9-(2,5-dimethylphenoxycarbonyl), 9-(2,6-bis(trifluoromethyl)phenoxycarbonyl) or 9-(2,6-dinitrophenoxycarbonyl) group, and a 10-methyl, 10-(3-(succinimidyloxycarbonyl)propyl), 10-(5-(succinimidyloxycarbonyl)pentyl), or 10-(10-(succinimidyloxycarbonyl)decyl) group, have been synthesized and their chemiluminescent properties have been tested. The 2,5-dimethylphenyl acridinium esters emit light slowly (glow) when treated with alkaline hydrogen peroxide, while the 2,6-dinitrophenyl and 2,6-bis(trifluoromethyl)phenyl esters emit light rapidly (flash). The substituent at the 10 position affects the hydrolytic stabilities of the compounds.

Solvent effect on chemiluminescence of acridinium thioester: a computational study

Chemiluminescent labelling, which is one of the promising procedures of modern immunodiagnostics, is increasingly carried out using acridinium derivatives, oxidant and alkaline aqueous environment. However, the efficiency of chemiluminescence of luminol or acridinium esters is higher in non-aqueous solvents such as DMSO or acetonitrile. Therefore, the search for a new environment of chemiluminescence reaction, especially this characterized by the higher quantum yield of chemiluminescence, is one of the aims of the research undertaken. Using computational methods (DFT and TD DFT with PCM model of solvent), we examined thermodynamic and kinetic data concerning the chemiluminescence and competitive dark pathways. Our results suggest that better characteristics of chemiluminescence reaction of acridinium thioester are observed in nonpolar solvents, such as methylcyclohexane, n-hexane and n-pentane, than in aqueous media used so far. Further experimental verification is necessary to confirm the possible application of proposed nonpolar solvents in chemiluminescent labelling and hence in immunodiagnostics.

Direct and Indirect Chemiluminescence: Reactions, Mechanisms and Challenges

Emission of light by matter can occur through a variety of mechanisms. When it results from an electronically excited state of a species produced by a chemical reaction, it is called chemiluminescence (CL). The phenomenon can take place both in natural and artificial chemical systems and it has been utilized in a variety of applications. In this review, we aim to revisit some of the latest CL applications based on direct and indirect production modes. The characteristics of the chemical reactions and the underpinning CL mechanisms are thoroughly discussed in view of studies from the very recent bibliography. Different methodologies aiming at higher CL efficiencies are summarized and presented in detail, including CL type and scaffolds used in each study. The CL role in the development of efficient therapeutic platforms is also discussed in relation to the Reactive Oxygen Species (ROS) and singlet oxygen (1O2) produced, as final products. Moreover, recent research results from our team are included regarding the behavior of commonly used photosensitizers upon chemical activation under CL conditions. The CL prospects in imaging, biomimetic organic and radical chemistry, and therapeutics are critically presented in respect to the persisting challenges and limitations of the existing strategies to date.

New luminometric method for quantification of biological sulfur nucleophiles with the participation of 9-cyano-10-methylacridinium salt

Biologically active compounds containing sulfhydryl groups (RSHs: N-acetyl-l-cysteine, d-penicillamine, glutathione and acetylthiocholine chloride) were used to develop a luminometric method for their quantification. The title substrate capable of chemiluminescence (CL) was isolated in a highly pure state as a chloride salt (99.9% using RP-HPLC) and identified using mass spectrometry (ESI Q-TOF) and ¹ H NMR spectroscopy. The cation included in the salt, 9-CMA⁺ , underwent oxidation in an alkaline environment containing RSHs by molecular oxygen, generating CL of various intensities, with no need for the use of hydrogen peroxide. The amount of produced light was linearly proportional to the content of investigated analytes in the system over the concentration range ~0.2-2 μM, with the detection limits in the range 0.19-1.73 μM. The mechanism of chemiluminogenic oxidation of 9-CMA⁺ in the presence of RSHs and molecular oxygen is proposed, using computational methods at the density-functional theory level. The presence of RSHs in an alkaline medium seems to be crucial to produce hydroperoxide anions (^- OOH), which initiate the 'light path' of 9-CMA⁺ transformations, ending with the excretion of electronically excited molecules of 10 methyl-acridan-9-one.

Computational Insights on the Mechanism of the Chemiluminescence Reaction of New Group of Chemiluminogens-10-Methyl-9-thiophenoxycarbonylacridinium Cations

Immunodiagnostics, in which one of the promising procedures is the chemiluminescent labelling, is essential to facilitate the detection of infections in a human organism. One of the standards commonly used in luminometric assays is luminol, which characterized by low quantum yield in aqueous environments. Acridinium esters have better characteristics in this topic. Therefore, the search for new derivatives, especially those characterized by the higher quantum yield of chemiluminescence, is one of the aims of the research undertaken. Using the proposed mechanism of chemiluminescence, we examined the effect of replacing a single atom within a center of reaction on the efficient transformation of substrates into electronically excited products. The density functional theory (DFT) and time dependent (TD) DFT calculated thermodynamic and kinetic data concerning the chemiluminescence and competitive dark pathways suggests that some of the scrutinized derivatives have better characteristics than the chemiluminogens used so far. Synthesis of these candidates for efficient chemiluminogens, followed by studies of their chemiluminescent properties, and ultimately in chemiluminescent labelling, are further steps to confirm their potential applicability in immunodiagnostics.

Enhancement effect on the chemiluminescence of acridinium esters under neutral conditions

Enhancement effect on the chemiluminescence of acridinium ester derivatives under neutral conditions was investigated. Additions of phenols did not enhance the chemiluminescence intensities of acridinium ester derivatives in the presence of horseradish peroxidase and hydrogen peroxide. Additions of cetyltrimethylammonium bromide apparently enhanced the chemiluminescence intensities of phenyl 10-methyl-10λ⁴ -acridine-9-carboxylate derivatives with electron-withdrawing groups at the 4-position of the phenyl group. In particular, the chemiluminescence intensity of 4-(trifluoromethyl)phenyl 10-methyl-10λ⁴ -acridine-9-carboxylate trifluoromethanesulfonate salt was 5.5 times stronger in the presence of cetyltrimethylammonium bromide than in its absence at pH 7. The chemiluminescence intensity of 3,4-dicyano-phenyl 10-methyl-10λ⁴ -acridine-9-carboxylate trifluoromethanesulfonate salt was 46 times stronger in the presence of cetyltrimethylammonium bromide at pH 7 than in its absence at pH 10.

A novel chemiluminescent immunoassay for detection of Toxoplasma gondii IgG in human sera

This study describes Toxoplasma gondii IgG chemiluminescent immunoassay (CLIA) based on the use of a novel immunochemical reagents in the form of the conjugates of original acridinium ester (AE) labels attached to antibodies and SAG2-GRA1-ROP1L chimeric antigen and shows that this test is useful for diagnostic purposes.