Reduction of biofilm and pathogenic microorganisms using curcumin-mediated photodynamic inactivation to prolong food shelf-life

Pathogenic microbial contamination (bacteria and fungi) in food products during production poses a significant global health risk, leading to food waste, greenhouse gas emissions, and aesthetic and financial losses. Bacteria and fungi, by forming solid biofilms, enhance their resistance to antimicrobial agents, thereby increasing the potential for cross-contamination of food products. Curcumin molecule-mediated photodynamic inactivation (Cur-m-PDI) technology has shown promising results in sterilizing microbial contaminants and their biofilms, significantly contributing to food preservation without compromising quality. Photosensitizers (curcumin) absorb light, leading to a chemical reaction with oxygen and producing reactive oxygen species (ROS) that effectively reduce bacteria, fungi, and biofilms. The mechanism of microorganism inhibition is caused by exposure to ROS generated via the type 1 pathway involving electron transfer (such as O2•-, H2O2, -OH•, and other radicals), the type 2 pathway involving energy transfer (such as 1O2), secondary ROS, and weakening of antioxidant enzymes. The effectiveness of the inactivation of microorganisms is influenced by the concentration of curcumin, light (source type and energy density), oxygen availability, and duration of exposure. This article reviews the mechanism of reducing microbial food contamination and inhibiting their biofilms through Cur-m-PDI. It also highlights future directions, challenges, and considerations related to the effects of ROS in oxidizing food, the toxicity of PDI to living cells and tissues, conditions/types of food products, and the stability and degradation of curcumin.

Photostability and photodynamic antimicrobial profile of dye extracts from four (4) plants: prospects for eco-friendly low-cost food disinfection and topical biomedical applications

In this study, photostability and photodynamic antimicrobial performance of dye extracts from Hibiscus sabdariffa (HS) calyces, Sorghum bicolor (SB) leaf sheaths, Lawsonia inermis (LI) leaves and Curcuma longa (CL) roots were investigated in Acetate-HCl (AH) Buffer (pH 4.6), Tris Base-HCl (TBH) Buffer (pH 8.6), distilled water (dH2O), and Phosphate Buffer Saline (PBS, pH 7.2) using Bacillus subtilis as model for gram positive bacteria, Escherichia coli as model for gram negative bacteria, phage MS2 as model for non-envelope viruses and phage phi6 as model for envelope viruses including SARS CoV-2 which is the causative agent of COVID-19. Our results showed that the photostability of the dye extracts is in the decreasing order of LI > CL > SB > HS. The dye extract-HS is photostable in dH2O but bleaches in buffers-AH, TBH and PBS. The rate of bleaching is higher in AH compared to in TBH and PBS. The bleaching and buffers affected the photodynamic and non-photodynamic antimicrobial activity of the dye extracts. The photodynamic antibacterial activity of the dye extracts is in the decreasing order of CL > HS > LI > SB while the non-photodynamic antibacterial activity is in the decreasing order of LI > CL > HS > SB. The non-photodynamic antiviral activity pattern observed is the same as that of non-photodynamic antibacterial activity observed. However, the photodynamic antiviral activity of the dye extracts is in the decreasing order of CL > LI > HS > SB. Given their performance, the dye extracts maybe mostly suitable for environmental applications including fresh produce and food disinfection, sanitation of hands and contact surfaces where water can serve as diluent for the extracts and the microenvironment is free of salts.

aPDI meets PPE: photochemical decontamination in healthcare using methylene blue-where are we now, where will we go?

Personal protective equipment (PPE) reuse, first recommended in the context of the SARS-CoV-2 pandemic, can mitigate shortages in crisis situations and can greatly reduce the environmental impact of typically single-use PPE. Prior to safe reuse, PPE must be sanitized and contaminating pathogens-in current circumstances viruses in particular-must be inactivated. However, many established decontamination procedures are not equitable and remain unavailable in low-resource settings. In mid-2020, an interdisciplinary consortium of researchers first studied the potential of implementing cheap and easy-to-use antimicrobial photodynamic inactivation (aPDI) using methylene blue as photosensitizer to decontaminate face masks and filtering facepiece respirators. In this perspective piece, we describe the development of this novel method, discuss recent advances, and offer insights into how equitable PPE decontamination via methylene blue-based aPDI may be integrated into circular economy policies in the healthcare sector.

Galleria mellonella-A Model for the Study of aPDT-Prospects and Drawbacks

Galleria mellonella is a promising in vivo model insect used for microbiological, medical, and pharmacological research. It provides a platform for testing the biocompatibility of various compounds and the kinetics of survival after an infection followed by subsequent treatment, and for the evaluation of various parameters during treatment, including the host-pathogen interaction. There are some similarities in the development of pathologies with mammals. However, a limitation is the lack of adaptive immune response. Antimicrobial photodynamic therapy (aPDT) is an alternative approach for combating microbial infections, including biofilm-associated ones. aPDT is effective against Gram-positive and Gram-negative bacteria, viruses, fungi, and parasites, regardless of whether they are resistant to conventional treatment. The main idea of this comprehensive review was to collect information on the use of G. mellonella in aPDT. It provides a collection of references published in the last 10 years from this area of research, complemented by some practical experiences of the authors of this review. Additionally, the review summarizes in brief information on the G. mellonella model, its advantages and methods used in the processing of material from these larvae, as well as basic knowledge of the principles of aPDT.

Photodynamic treatment of pathogens

The current viral pandemic has highlighted the compelling need for effective and versatile treatments, that can be quickly tuned to tackle new threats, and are robust against mutations. Development of such treatments is made even more urgent in view of the decreasing effectiveness of current antibiotics, that makes microbial infections the next emerging global threat. Photodynamic effect is one such method. It relies on physical processes proceeding from excited states of particular organic molecules, called photosensitizers, generated upon absorption of visible or near infrared light. The excited states of these molecules, tailored to undergo efficient intersystem crossing, interact with molecular oxygen and generate short lived reactive oxygen species (ROS), mostly singlet oxygen. These species are highly cytotoxic through non-specific oxidation reactions and constitute the basis of the treatment. In spite of the apparent simplicity of the principle, the method still has to face important challenges. For instance, the short lifetime of ROS means that the photosensitizer must reach the target within a few tens nanometers, which requires proper molecular engineering at the nanoscale level. Photoactive nanostructures thus engineered should ideally comprise a functionality that turns the system into a theranostic means, for instance, through introduction of fluorophores suitable for nanoscopy. We discuss the principles of the method and the current molecular strategies that have been and still are being explored in antimicrobial and antiviral photodynamic treatment.

Recent Advances in Photodynamic Therapy against Fungal Keratitis

Fungal keratitis is a serious clinical infection on the cornea caused by fungi and is one of the leading causes of blindness in Asian countries. The treatment options are currently limited to a few antifungal agents. With the increasing incidence of drug-resistant infections, many patients fail to respond to antibiotics. Riboflavin-mediated corneal crosslinking (similar to photodynamic therapy (PDT)) for corneal ectasia was approved in the US in the early 2000s. Current evidence suggests that PDT could have the potential to inhibit fungal biofilm formation and overcome drug resistance by using riboflavin and rose bengal as photosensitizers. However, only a few clinical trials have been initiated in anti-fungal keratitis PDT treatment. Moreover, the removal of the corneal epithelium and repeated application of riboflavin and rose bengal are required to improve drug penetration before and during PDT. Thus, an improvement in trans-corneal drug delivery is mandatory for a successful and efficient treatment. In this article, we review the studies published to date using PDT against fungal keratitis and aim to enhance the understanding and awareness of this research area. The potential of modifying photosensitizers using nanotechnology to improve the efficacy of PDT on fungal keratitis is also briefly reviewed.

Photodynamic disinfection and its role in controlling infectious diseases

Photodynamic therapy is witnessing a revival of its origins as a response to the rise of multi-drug resistant infections and the shortage of new classes of antibiotics. Photodynamic disinfection (PDDI) of microorganisms is making progresses in preclinical models and in clinical cases, and the perception of its role in the clinical armamentarium for the management of infectious diseases is changing. We review the positioning of PDDI from the perspective of its ability to respond to clinical needs. Emphasis is placed on the pipeline of photosensitizers that proved effective to inactivate biofilms, showed efficacy in animal models of infectious diseases or reached clinical trials. Novel opportunities resulting from the COVID-19 pandemic are briefly discussed. The molecular features of promising photosensitizers are emphasized and contrasted with those of photosensitizers used in the treatment of solid tumors. The development of photosensitizers has been accompanied by the fabrication of a variety of affordable and customizable light sources. We critically discuss the combination between photosensitizer and light source properties that may leverage PDDI and expand its applications to wider markets. The success of PDDI in the management of infectious diseases will ultimately depend on the efficacy of photosensitizers, affordability of the light sources, simplicity of the procedures, and availability of fast and efficient treatments.

Photofungizides Based on Curcumin and Derivates Thereof against Candida albicans and Aspergillus niger

Fungal infections in humans, contamination of food and structural damage to buildings by fungi are associated with high costs for the general public. In addition, the increase in antifungal resistance towards conventional treatment raises the demand for new fungicidal methods. Here, we present the antifungal use of Photodynamic Inactivation (PDI) based on the natural photosensitizer curcumin and a water-soluble positively charged derivative thereof (SA-CUR 12a) against two different model organisms; Candida albicans grown in a liquid culture and photo treated with a 435 nm LED light followed by counting of the colony-forming units and photoinactivation of tissue-like hyphal spheres of Aspergillus niger (diameter ~5 mm) with subsequent monitoring of colony growth. Curcumin (50 µM, no incubation period, i.p.) supplemented with 10% or 0.5% DMSO as well as SA-CUR 12a (50 µM no i.p or 5 min i.p.) triggered a photoantifungal effect of >4 log units towards C. albicans. At 100 µM, SA-CUR 12a (0 min or 5 min i.p.) achieved a reduction of >6 log units. Colonies of A. niger shrunk significantly during PDI treatment. Photoinactivation with 50 µM or 100 µM curcumin (+0.5% DMSO) resulted in complete growth inhibition. PDI using 20, 50 or 100 µM SA-CUR 12a (with or without 10% DMSO) also showed a significant reduction in colony area compared to the control after 48 h, although less pronounced compared to curcumin. In summary, PDI using curcumin or SA-CUR 12a against C. albicans or A. niger is a promising alternative to currently used fungicides, with the advantage of being very unlikely to induce resistance.

Novel 2,3-Dialdehyde Cellulose-Based Films with Photodynamic Inactivation Potency by Incorporating the β-Cyclodextrin/Curcumin Inclusion Complex

Antibacterial packaging film mediated by photodynamic inactivation (PDI) is a new concept in food industry. The objective of this study was to fabricate a green 2,3-dialdehyde cellulose (DAC)-based antimicrobial film with PDI potency by incorporating the β-cyclodextrin/curcumin (β-CD/Cur) complex as a photosensitizer. The PDI-mediated films were characterized by evaluating the surface morphology, chemical structure, light transmittance, mechanical properties, photochemical and thermal stability, and water solubility. The results showed that the DAC-CD/Cur films were soluble in water and mechanically strong with a tensile strength of 63.87 MPa and an elongation break of 1.32%, which was attributed to the formation of hydrogen bonds between DAC and β-CD/Cur molecules. Meanwhile, the composite films possessed a good light transmittance but impeded the penetration of ultraviolet light and efficiently delayed the degradation of curcumin. More importantly, the PDI-mediated films exhibited a broad-spectrum ability to kill Listeria monocytogenes, Vibrio parahaemolyticus, and Shewanella putrefaciens in pure culture. Notably, they also potently inactivated these harmful bacteria on ready-to-eat salmon with a maximum of ∼4 Log CFU/g (99.99%) reduction after 60 min irradiation (13.68 J/cm²). Therefore, the PDI-mediated DAC-CD/Cur films are novel and promising antimicrobial food packaging films in food industry.

Total mouth photodynamic therapy mediated by blue led and curcumin in individuals with AIDS

OBJECTIVES

To test the effectiveness of an efficient therapeutic protocol for the total mouth antimicrobial photodynamic therapy (aPDT) mediated by 450 nm blue LED associated with curcumin in individuals with AIDS.

METHODS

Patients were selected by exclusion criteria and randomly distributed in groups to test the effectiveness of antimicrobial aPDT with curcumin 0.75 mg/mL associated with the blue LED (67 mW/cm², 20.1 J/cm²). Before and after the treatments, samples were collected from the saliva being processed in duplicate in selective culture media. The colonies were counted and the results obtained in log10 CFU/mL were statistically tested (T-paired statistical test, 5%).

RESULTS

The log10 CFU/mL of Streptococcus spp., Staphylococcus spp., and total count of microorganisms showed statistically significant (p = 0.023; p = 0.001 and p = 0.017, respectively) reduction after treatment in patients with aPDT.

CONCLUSION

aPDT was effective in reducing Streptococcusspp. in addition to reducing Staphylococcusspp., enterobacteria and the total count of microorganisms when considering the numbers of TCD4 and TCD8 lymphocytes. The aPDT in the studied protocol was able to control clinically important intraoral microorganisms for AIDS patients, both those with TCD4 lymphocytes above or below 25% of normal and those with TCD8 lymphocytes above 25% of normal.

In the Right Light: Photodynamic Inactivation of Microorganisms Using a LED-Based Illumination Device Tailored for the Antimicrobial Application

Drug-resistant bacteria threaten the health of people world-wide and cause high costs to their health systems. According to Scientific American, the number of regrettable fatalities due to the bacteria that are resistant to conventional antibiotics will sum up to 300 million until 2050 if the problem is not tackled immediately. Photodynamic Inactivation (PDI) has proven effective against microorganisms irrespective of their resistance to conventional treatment, but for the translation into clinical practice, economic, homogenous and powerful light sources holding approval as medical devices are needed. In this study we present two novel light emitting diode (LED)-based lamps (Repuls7PDI-red and Repuls7PDI-blue) tailored for application in PDI and demonstrate their photodynamic efficiency upon using either methylene blue (MB), a photoactive compound widely used in PDI, or Sodium Magnesium Chlorophyllin (CHL), a water-soluble derivative of chlorophyll, which holds approval as food additive E140, against bacteria and fungi. Gram+ Staphylococcus aureus, Gram- Escherichia coli and the yeast Candida albicans serve as model systems. Repuls7PDI-red emits a wavelength of 635 nm and an intensity of 27.6 ± 2.4 mW·cm^-2 at a distance of 13.5 cm between the light source and the target, while the Repuls7PDI-blue allows an exposure at 433 nm (within the range of violet light) (6.4 ± 0.5 mW·cm^-2 at 13.5 cm). Methylene blue was photoactivated with the Repuls7PDI-red at 635 nm (25.6 J·cm^-2) and allows for photokilling of E. coli by more than 6 log₁₀ steps at a concentration of 10 µM MB. Using equal parameters, more than 99.99999% of S. aureus (20 µM MB) and 99.99% of C. albicans (50 µM MB) were killed. If blue light (Repuls7PDI-blue, 433 nm, 6.6 J·cm²) is used to trigger the production of reactive oxygen species (ROS), a photoinactivation of S. aureus (5 µM CHL, CFU reduction > 7 log₁₀) and C. albicans (>7 log₁₀) below the detection limit is achieved. PDI based on CHL (10 µM) using red light activation reduces the number of viable S. aureus by more than 6 log₁₀. Our data prove that both LED-based light sources are applicable for Photodynamic Inactivation. Their easy-to-use concept, high light output and well-defined wavelength might facilitate the translation of PDI into clinical practice.

Dual wavelength irradiation antimicrobial photodynamic therapy using indocyanine green and metformin doped with nano-curcumin as an efficient adjunctive endodontic treatment modality

BACKGROUND

Indocyanine green (ICG) doped with nano-curcumin (N-CUR) can increase photosensitivity in antimicrobial photodynamic therapy (aPDT). Since metformin (Met) provides a synergistic advantage with photosensitivity, it was conjugated with N-CUR@ICG. Aim of the study was to evaluate the photosensitizing effect of N-CUR@ICG-Met used as a new photosensitizer in dual wavelengths irradiation (diode laser and light-emitting diode, LED) aPDT in root canals infected with Enterococcus faecalis biofilm.

MATERIALS AND METHODS

Following synthesis and confirmation of N-CUR@ICG-Met by Scanning electrone microscope (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and Zetasizer analysis, the mature microbial biofilm was formed. The quantitative and qualitative evaluations of E. faecalis biofilm were made using microbial viability and SEM analysis of the following groups of treatment modalities (n = 5): 1- N-CUR, 2- ICG, 3- Met, 4- N-CUR@ICG, 5- N-CUR@ICG-Met, 6- Diode laser, 7- LED, 8- aPDT/diode, 9- aPDT/LED, 10- aPDT/diode laser + LED, 11- aPDT/LED + diode laser, 12- 2.5 % sodium hypochlorite (NaOCl). In addition, E. faecalis not treated served as negative control. Data were statistically analyzed using One-way Analysis of Variance (ANOVA) and the post-Hoc Bonferroni tests with a level of significance set at P < 0.05.

RESULTS

SEM, FT-IR, XRD, Zetasizer analysis confirmed successful doping of ICG-Met onto/into N-CUR. The treatment modality of N-CUR@ICG-Met mediated aPDT/diode laser, aPDT/LED, aPDT/diode laser + LED, and aPDT/LED + diode laser statistically decreased the cell viability of E. faecalis for 69.40 %, 75.52 %, 82.74 %, and 83.84 %, respectively compared with the negative control group (P < 0.05). The double wavelengths irradiation technique, which exposed the N-CUR@ICG-Met with diode laser irradiation and immediately after with LED (i.e. group No. 10), as well as, N-CUR@ICG-Met with LED irradiation and immediately after with diode laser (i.e. group No. 11) reduced the viable E. faecalis count in biofilm structures statistically more than the other treatment modalities (P < 0.05).

CONCLUSIONS

N-CUR@ICG-Met as a new photosensitizer in dual wavelengths irradiation method may improve anti-biofilm activity of aPDT against E. faecalis.

The development of an electrochemical nanoaptasensor to sensing chloramphenicol using a nanocomposite consisting of graphene oxide functionalized with (3-Aminopropyl) triethoxysilane and silver nanoparticles

In the present research, a nanoaptasensor is proposed for electrochemical measurement of chloramphenicol (CAP). To this purpose, the nanocomposite prepared from graphene oxide and functionalized with (3-Aminopropyl) triethoxysilane/silver nanoparticles to the abbreviated AgNPs/[NH₂-Si]-f-GO, was utilized to modify the glassy carbon electrode (GCE). Furthermore, the modified electrode was also investigated using the electrochemical methods such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The AgNPs/[NH₂-Si]-f-GO nanocomposite was investigated by UV-Vis spectrophotometry. Fourier transform infrared (FT-IR) spectrometry and transmission electron microscopy (TEM). Moreover, [Fe(CN)₆]^3-/4 solution in the role of an electrochemical probe was applied. The AgNPs/[NH₂-Si]-f-GO nanocomposite was confirmed as a good layer to covalent immobilization of aptamer (Apt) onto the GCE surface. In this sense, the DPV was used as a sensitive electrochemical technique for the measurement of CAP with an appropriate linear concentration range which was found to be between 10 pM and 0.2 μM and, with a low limit of detection, it equaled 3.3 pM. CAP which was identified in the presence of other usual antibiotics existed in the real samples.

Role of Cholesterol Conjugation in the Antibacterial Photodynamic Therapy of Branched Polyethylenimine-Containing Nanoagents

Photodynamic therapy is a promising approach for fighting bacterial infections because it can induce few side effects, develop no drug resistance, and realize precise treatment. However, most photosensitizers (PSs) have the disadvantages of poor water-solubility, severe self-quenching, and potential toxicity. Here, the cationic polymer polyethyleneimine (PEI) was used to prepare a cholesterol- and chlorin e6 (Ce6, a common PS)-conjugated compound via the carboxyl-amine reaction or the acyl chloride-amine reaction (abbreviated as Chol-PEI-Ce6). The as-prepared Chol-PEI-Ce6 molecules can self-assemble into close-to-spherical nanoparticles (NPs) with an average diameter of ∼15 nm and can bind to the bacterial surfaces via the synergistic hydrophobic insertion of the cholesterol moieties and electrostatic interaction between the cationic amine groups of PEI and the bacterial surfaces. Upon light irradiation, the NPs can effectively inactivate both Gram-positive and Gram-negative bacteria. Besides, the interaction between Chol-PEI-Ce6 NPs and bacteria markedly enhances the production of intracellular reactive oxygen species after light irradiation, which may account for the excellent antibacterial performance of the NPs. More importantly, the NPs possess negligible dark cytotoxicity and good hemocompatibility. Therefore, the present work may have strong implications for developing novel antibacterial agents to fight against bacterial infections.

Enhanced photosensitizing properties of protein bound curcumin

AIMS

The naturally occurring compound curcumin has been proposed for a number of pharmacological applications. In spite of the promising chemotherapeutic properties of the molecule, the use of curcumin has been largely limited by its chemical instability in water. In this work, we propose the use of water soluble proteins to overcome this issue in perspective applications to photodynamic therapy of tumors.

MATERIALS AND METHODS

Curcumin was bound to bovine serum albumin and its photophysical properties was studied as well as its effect on cell viability after light exposure through MTT assay and confocal imaging.

KEY FINDINGS

Bovine serum albumin binds curcumin with moderate affinity and solubilizes the hydrophobic compound preserving its photophysical properties for several hours. Cell viability assays demonstrate that when bound to serum albumin, curcumin is an effective photosensitizer for HeLa cells, with better performance than curcumin alone. Confocal fluorescence imaging reveals that when curcumin is delivered alone, it preferentially associates with mitochondria, whereas curcumin bound to bovine serum albumin is found in additional locations within the cell, a fact that may be related to the higher phototoxicity observed in this case.

SIGNIFICANCE

The higher bioavailability of the photosensitizing compound curcumin when bound to serum albumin may be exploited to increase the efficiency of the drug in photodynamic therapy of tumors.

Save the crop: Photodynamic Inactivation of plant pathogens I: bacteria

The ever growing world-population poses challenges concerning the need for more food free of pesticide residues. The most common means to control plant pathogens is through the application of pesticides, which raises concerns over safety for humans and the environment. Recently, Photodynamic Inactivation (PDI) of microorganisms using natural photosensitizers has shown itself to be a powerful tool to combat bacteria and fungi. This study investigates the efficacy of PDI against the Gram(+) bacterial plant pathogen Rhodococcus fascians and Gram(-) Xanthomonas axonopodis and Erwinia amylovora using two chlorin e6 derivatives as photosensitizers: anionic sodium magnesium chlorophyllin (Chl, approved as food additive E140) in combination with cell wall permeabilizing agents (Na2EDTA or Polyaspartic acid sodium salt (PA)) and B17-0024, a mixture of chlorin e6 derivatives with cationic moieties at physiological pH. Both photosensitizers show excellent efficacy against R. fascians, whereby B17-0024 is phototoxic at a one order of magnitude lower concentration than Chl (10 μM B17-0024: relative inactivation (r.i.) >7.5 × 106, 100 μM Chl: r.i. 2.2 × 106, illumination with 26.6 J cm-2, 395 nm). The phototreatment of Gram(-) bacteria with Chl requires the obligatory use of cell wall permeabilizing agents like Na2EDTA (X. axonopodis) or PA (E. amylovora) to induce significant killing (more than 7 log units at 100 μM). On the other hand, B17-0024 proves to be a highly effective photosensitizer inducing bacterial inactivation at very low concentrations (10 μM for R. fascians and X. axonopodis, 100 μM for E. amylovora) without additives. In summary, PDI using both the natural photosensitizer Chl in combination with cell wall permeabilizing agents is effective and environmentally friendly. As an alternative, B17-0024 is highly photoactive against all model strains tested - even without cell wall permeabilizing agents. The photodynamic approach based on chlorin e6 derivatives should add to the growers' toolbox as a preferred alternative for the control of phytopathogens.

Porphyrinoid photosensitizers mediated photodynamic inactivation against bacteria

The multi-drug resistant bacteria have become a serious problem complicating therapies to such a degree that often the term "post-antibiotic era" is applied to describe the situation. The infections with methicillin-resistant S. aureus, vancomycin-resistant E. faecium, third generation cephalosporin-resistant E. coli, third generation cephalosporin-resistant K. pneumoniae and carbapenem-resistant P. aeruginosa have become commonplace. Thus, the new strategies of infection treatment have been searched for, and one of the approaches is based on photodynamic antimicrobial chemotherapy. Photodynamic protocols require the interaction of photosensitizer, molecular oxygen and light. The aim of this review is to provide a comprehensive overview of photodynamic antimicrobial chemotherapy by porphyrinoid photosensitizers. In the first part of the review information on the mechanism of photodynamic action and the mechanism of the bacteria resistance to the photodynamic technique were described. In the second one, it was described porphyrinoids photosensitizers like: porphyrins, chlorins and phthalocyanines useable in photodynamic bacteria inactivation.

Evidence of curcumin and curcumin analogue effects in skin diseases: A narrative review

Curcumin, a natural polyphenolic and yellow pigment obtained from the spice turmeric, has strong antioxidative, anti-inflammatory, and antibacterial properties. Due to these properties, curcumin has been used as a remedy for the prevention and treatment of skin aging and disorders such as psoriasis, infection, acne, skin inflammation, and skin cancer. Curcumin has protective effects against skin damage caused by chronic ultraviolet B radiation. One of the challenges in maximizing the therapeutic potential of curcumin is its low bioavailability, limited aqueous solubility, and chemical instability. In this regard, the present review is focused on recent studies concerning the use of curcumin for the treatment of skin diseases, as well as offering new and efficient strategies to optimize its pharmacokinetic profile and increase its bioavailability.

A two dimensional metal-organic framework nanosheets-based fluorescence resonance energy transfer aptasensor with circular strand-replacement DNA polymerization target-triggered amplification strategy for homogenous detection of antibiotics

In the study, a novel two dimensional metal-organic framework (Cu-TCPP nanosheets) based fluorescence resonance energy transfer (FRET) aptasensing platform was developed for detecting antibiotics. Cu-TCPP nanosheets were employed for quenching the background fluorescence and circular strand-replacement DNA polymerization (CSRP) for signal amplification. To fulfill the purpose, we designed an aptamer hairpin probe (HP) whose stem can be opened while specifically binding to target. Then the opened HP would bind with the primer. Under the action of polymerase, extension reaction was induced to generate double-stranded DNA (dsDNA), and then the target was released for the next cycle. Finally, SYBR Green I (SG) can bind with dsDNA to produce strong fluorescence response for quantification of target. It's worth mentioning that the fluorescence of HP/SG complex and free SG could be completely quenched by Cu-TCPP nanosheets while that of dsDNA/SG complex wouldn't be affected. Thus, the sensor produced negligible background signals. It can produce 7.5-fold improved S/N compared to a graphene oxide (GO)-based FRET aptasensor. Chloramphenicol (CAP) was chosen as the model analyte to demonstrate the feasibility of the sensor system. The detection range is broad from 0.001 to 10 ng mL^-1 with a detection limit down to 0.3 pg mL^-1. The proposed assay was label free and can be used in homogenous detection which greatly simplifies the complexity of operations. The strategy opens a new way to develop sensitive, in-situ and simple assay for antibiotics in foods.

Reduced methicillin-resistant Staphylococcus aureus biofilm formation in bone cavities by photodynamic therapy

Photodynamic Therapy (PDT) is a promising alternative for the treatment of infectious bone lesions in the oral cavity. The objective of this study was to evaluate the antimicrobial effectiveness of PDT using blue LED associated with curcumin in methicillin-resistant Staphylococcus aureus biofilms (MRSA) in bovine bone cavities by fluorescence spectroscopy. Standardized suspensions of MRSA culture were inoculated into bone lesions to form biofilm. Forty bone species were distributed in three distinct groups: L-C- (control); L + C- (LED for 5 min); L-C+ (curcumin incubation for 5 min) and L + C+ (PDT). Aliquots of 100 μL were collected from the bone cavities after the treatments and were cultived in BHI for 24 h at 36 °C ± 1 and bacterial colonies counting were performed. Statistical analysis were performed using the paired t-test and analysis of variance (ANOVA) for the variables studied.

RESULTS

The control and PDT groups presented statistically significant differences (p < 0.001). It was possible to reduce 3.666 log10 CFU/mL of MRSA and a reduction in the fluorescence emitted after the treatments was observed. The MRSA reduction in biofilms by PDT was the most efficient treatmnent. There was a significant reduction of biofilms in the L + C- and non-PDT groups by fluorescence spectroscopy images.

New horizons in microbiological food safety: Photodynamic Decontamination based on a curcumin derivative

Outbreaks of foodborne diseases are regularly reported worldwide. In particular, uncooked plant food is considered risky in terms of microbiological safety. Food is also the most important transmission route for resistant microorganisms from animals to humans. Photodynamic Decontamination (PDc) of foodstuff was recently introduced as a novel approach for increasing microbiological food safety. We investigated the efficiency of PDc on plant food with different geometries (flat, spherical and complex) using a two-dimensional LED array as a light source (435 nm, 33.8 J cm-2) and the cationic curcumin derivative SACUR-3 as a photosensitiser. A photoantibacterial effect (>3 log10 CFU reduction) was achieved on all flat substrates (slices of cucumber, tomato and lettuce) with 10 μM, 50 μM or 100 μM SACUR-3. The maximal photokilling with a relative inactivation of 5.6 log10 was measured on lettuce using 50 μM of the photoactive compound. Phototreatment of non-germinated fenugreek seeds and mung beans was successful if the spherical objects were rotated while under illumination (antibacterial effect at 100 μM SACUR-3). The decontamination of mung bean germlings with a more complex geometry using the PDc approach was ineffective with the two-dimensional light source. In conclusion, PDc based on the cationic curcumin derivative SACUR-3 is very effective at improving the microbiological safety of plant food with a flat or spherical geometry. More complex objects will require the development of novel illumination devices.

Encapsulation of curcumin in polymeric nanoparticles for antimicrobial Photodynamic Therapy

Curcumin (CUR) has been used as photosensitizer in antimicrobial Photodynamic Therapy (aPDT). However its poor water solubility, instability, and scarce bioavalibility hinder its in vivo application. The aim of this study was to synthesize curcumin in polymeric nanoparticles (NP) and to evaluate their antimicrobial photodynamic effect and cytoxicity. CUR in anionic and cationic NP was synthesized using polylactic acid and dextran sulfate by the nanoprecipitation method. For cationic NP, cetyltrimethylammonium bromide was added. CUR-NP were characterized by physicochemical properties, photodegradation, encapsulation efficiency and release of curcumin from nanoparticles. CUR-NP was compared with free CUR in 10% dimethyl sulfoxide (DMSO) as a photosensitizer for aPDT against planktonic and biofilms (mono-, dual- and triple-species) cultures of Streptococcus mutans, Candida albicans and Methicillin-Resistant Staphylococcus aureus. The cytotoxicity effect of formulations was evaluated on keratinocytes. Data were analysed by parametric (ANOVA) and non-parametric (Kruskal-Wallis) tests (α = 0.05). CUR-NP showed alteration in the physicochemical properties along time, photodegradation similar to free curcumin, encapsulation efficiency up to 67%, and 96% of release after 48h. After aPDT planktonic cultures showed reductions from 0.78 log₁₀ to complete eradication, while biofilms showed no antimicrobial effect or reductions up to 4.44 log₁₀. Anionic CUR-NP showed reduced photoinactivation of biofilms. Cationic CUR-NP showed microbicidal effect even in absence of light. Anionic formulations showed no cytotoxic effect compared with free CUR and cationic CUR-NP and NP. The synthesized formulations improved the water solubility of CUR, showed higher antimicrobial photodynamic effect for planktonic cultures than for biofilms, and the encapsulation of CUR in anionic NP reduced the cytotoxicity of 10% DMSO used for free CUR.

Zinc-Substituted Myoglobin Is a Naturally Occurring Photo-antimicrobial Agent with Potential Applications in Food Decontamination

Zinc-substituted myoglobin (ZnMb) is a naturally occurring photosensitizer that generates singlet oxygen with a high quantum yield. Using a combination of photophysical and fluorescence imaging techniques, we demonstrate the interaction of ZnMb with Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. An efficient antibacterial action against S. aureus was observed, with a reduction up to 99.9999% in the number of colony-forming units, whereas no sizable effect was detected against E. coli. Because ZnMb is known to form during the maturation of additive-free not-cooked cured ham, the use of this protein as a built-in photodynamic agent may constitute a viable method for the decontamination of these food products from Gram-positive bacteria.

Antimicrobial photodynamic inactivation: a bright new technique to kill resistant microbes

Photodynamic therapy (PDT) uses photosensitizers (non-toxic dyes) that are activated by absorption of visible light to form reactive oxygen species (including singlet oxygen) that can oxidize biomolecules and destroy cells. Antimicrobial photodynamic inactivation (aPDI) can treat localized infections. aPDI neither causes any resistance to develop in microbes, nor is affected by existing drug resistance status. We discuss some recent developments in aPDI. New photosensitizers including polycationic conjugates, stable synthetic bacteriochlorins and functionalized fullerenes are described. The microbial killing by aPDI can be synergistically potentiated (several logs) by harmless inorganic salts via photochemistry. Genetically engineered bioluminescent microbial cells allow PDT to treat infections in animal models. Photoantimicrobials have a promising future in the face of the unrelenting increase in antibiotic resistance.