What do we know about bifunctional cage-like T8 silsesquioxanes? Theory versus lab routine

In this article, we explore theoretical validations of experimental findings pertaining to the classical corner-capping reactions of a commercially available heptaisobutyltrisilanol cage to mono-substituted phenylhepta(isobutyl)-POSS cages. Additionally, the process of opening a fully condensed cage is tracked to assess the possibility of isolating and separating the resulting isomers. The corner-capping reactions of potential silanotriols, both as monomers and dimers, and the impact of these structural motifs on their closing to bifunctional POSS cages are also investigated. Our studies highlight that analyzing experimental results alone, without incorporating complex theoretical investigations, does not offer a clear understanding of the reactions involving multiple simultaneously reacting substrates, which may also undergo further transformations, potentially complicating the conventional pathways of classic corner-opening/capping reactions.

A Brief Review on Selected Applications of Hybrid Materials Based on Functionalized Cage-like Silsesquioxanes

Rapid developments in materials engineering are accompanied by the equally rapid development of new technologies, which are now increasingly used in various branches of our life. The current research trend concerns the development of methods for obtaining new materials engineering systems and searching for relationships between the structure and physicochemical properties. A recent increase in the demand for well-defined and thermally stable systems has highlighted the importance of polyhedral oligomeric silsesquioxane (POSS) and double-decker silsesquioxane (DDSQ) architectures. This short review focuses on these two groups of silsesquioxane-based materials and their selected applications. This fascinating field of hybrid species has attracted considerable attention due to their daily applications with unique capabilities and their great potential, among others, in biomaterials as components of hydrogel networks, components in biofabrication techniques, and promising building blocks of DDSQ-based biohybrids. Moreover, they constitute attractive systems applied in materials engineering, including flame retardant nanocomposites and components of the heterogeneous Ziegler-Natta-type catalytic system.

Novel hybrid composites based on double-decker silsesquioxanes functionalized by methacrylate derivatives and polyvinyl alcohol as potential materials utilized in biomedical applications

The use of diverse biomaterials for regenerative medicine is constantly evolving. Therefore, looking for easy-to-scale-up materials in terms of preparation, less complex composition, and featuring structural and chemical stability seems justified. In this work, we report the preparation of double-decker silsesquioxane-based (DDSQ-based) composites, which, according to our best knowledge, have never been used as biomaterials. A family of methacrylate-substituted DDSQs was obtained starting from the previously reported hydroxyalkyl double-decker silsesquioxanes. In the resulting hybrids, methacrylate groups are attached to each other's lateral silicon atoms of DDSQ in trans positions, providing an excellent geometry for forming thin layers. In contrast to pure organic methacrylates, the covalent bonding of methacrylate derivatives to inorganic silsesquioxane core improves mechanics, cell adhesion, and migration properties. Furthermore, to increase the hydrophilicity of the resulting DDSQ-based hybrids, polyvinyl alcohol (PVA) was added. The entire system forms an easy-to-obtain two-component (DDSQ-PVA) composite, which was subjected without any upgrading additives to biological tests later in the research. The resulting biomaterials fulfill the requirements for potential medical applications. Human fibroblasts growing on prepared hybrid composites are characterized by proper spindle-shaped morphology, proliferation, and activation status similar to control conditions (cells cultured on PVA), as well as increased adhesion and migration abilities. The obtained results suggest that the prepared biomaterials may be used in regenerative medicine in the future.

Corner-opening and corner-capping of mono-substituted T8 POSS: product distribution and isomerization

We applied chromatographic and spectroscopic techniques to revisit the product distribution of the corner-opening and corner-capping reactions of monosubstituted T₈ POSS. The monosubstituted Si is more likely to be removed than the remaining seven Si atoms during the corner-opening. After the corner-capping, the yield of monosubstituted T₈ POSS is much higher than the yields of the ortho- and meta-isomers of disubstituted T₈ POSS, and the para-isomer is negligible.

Metal-Free Hydrosilylation Polymerization by Merging Photoredox and Hydrogen Atom Transfer Catalysis

Organosilicon compounds and polymers have found wide applications as synthetic building blocks and functional materials. Hydrosilylation is a common strategy toward the synthesis of organosilicon compounds and polymers. Although transition-metal-catalyzed hydrosilylation has achieved great advances, the metal-free hydrosilylation polymerization of dienes and bis(silane)s, especially the one suitable for both electron-rich and electron-deficient dienes, is largely lacking. Herein, we report a visible-light-driven metal-free hydrosilylation polymerization of both electron-rich and electron-deficient dienes with bis(silane)s by using the organic photocatalyst and hydrogen atom transfer (HAT) catalyst. We achieved the well-controlled step-growth hydrosilylation polymerizations of the electron-rich diene and bis(silane) monomer due to the selective activation of Si-H bonds by the organic photocatalyst (4CzIPN) and the thiol polarity reversal reagent (HAT 1). For the electron-deficient dienes, hydrosilylation polymerization and self-polymerization occurred simultaneously in the presence of 4CzIPN and aceclidine (HAT 2), providing the opportunity to produce linear, hyperbranched, and network polymers by rationally tuning the concentration of electron-deficient dienes and the ratio of bis(silane)s and dienes to alter the proportion of the two polymerizations. A wide scope of bis(silane)s and dienes furnished polycarbosilanes with high molecular weight, excellent thermal stability, and tunable architectures.

Preparation of Soluble POSS-Linking Polyamide and Its Application in Antifogging Films

In this study, we prepared a polyhedral oligomeric silsesquioxane (POSS)-linking polyamide (POSS polyamide) by a polycondensation of ammonium-functionalized POSS (POSS-A) and carboxyl-functionalized POSS (POSS-C) in dehydrated dimethyl sulfoxide (DMSO) using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) as condensing agents. The obtained POSS polyamide was soluble in various highly polar solvents, and it could form a self-standing film. FT-IR, ¹H NMR, and ²⁹Si NMR analyses showed that POSS polyamide is a polymer in which POSS-A and POSS-C are linked almost linearly by amide bonds. Furthermore, the cast film obtained by heat-treating the polymer at 150 °C for 30 min exhibited excellent transparency and hard-coating (pencil scratch test: 5H) and antifogging properties (evaluation by water vapor exposure).

Supramolecular organogel formation behaviors of beads-on-string shaped poly(azomethine)s dependent on POSS structures in the main chains

Organogel formation was observed for isobutyl-substituted cage octasilsesquioxane (T₈) in the main-chain type polyazomethines, while precipitates instead of gel formation were observed for phenyl-substituted double-decker-shaped silsesquioxanes (DDSQ)-poly(azomethine)s.

Dialkenylgermanes as Precursors of Silsesquioxane-based Macromolecular Structures

Herein we report a study of highly efficient platinum-catalyzed hydrosilylation of dialkenylgermanes with silsesquioxanes and spherosilicates. The use of divinyl- and diallylgermanes allowed the synthesis of new classes of compounds, i. e., dumbbell-type systems, silsesquioxanes with alkenyl pendant group, and oligomeric derivatives. The results are supported by detailed data from in situ FT-IR and NMR measurements, enabling precise monitoring of the reaction progress and determination of regioselectivity of the formed products.

A Simple Preparation Route for Bio-Phenol MQ Silicone Resin via the Hydrosilylation Method and its Autonomic Antibacterial Property

MQ silicone resins represent a broad range of hydrolytic condensation products of monofunctional silane (M units) and tetrafunctional silane (Q units). In this work, a Bio-Phenol MQ silicone resin (BPMQ) was designed and synthesized by the hydrosilylation of hydrogen containing MQ silicone resin and eugenol in the presence of chloroplatinic acid. The structure, thermal property, and antibacterial property against Escherichia coli of the modified MQ silicone resin were investigated. The results showed that BPMQ has been prepared successfully, and the thermal stability of this modified polymer improved significantly because of the introduction of phenyl in eugenol. The temperature at the maximum degradation rate increased from 250 °C to 422.5 °C, and the residual yields mass left at 600 °C were increased from 2.0% to 28.3%. In addition, its antibacterial property against Escherichia coli was also enhanced markedly without adding any other antimicrobial agents. This improved performance is ascribed to special functional groups in the structure of eugenol. The BPMQ polymer is expected to be applied to pressure-sensitive adhesives and silicone rubber products for the biomedical field due to its reinforcing effect and antioxidant quality.

One-pot strategy for synthesis of open-cage silsesquioxane monomers

A novel synthetic strategy to access POSS monomers has been proposed; one reaction site of an open-cage POSS was capped, and the remaining two silanol groups were functionalized for polymerization. Importantly, the monomer can be obtained by one-pot synthesis without any troublesome isolation process.

Anion identification using silsesquioxane cages

Anthracene-conjugated octameric silsesquioxane cages thermodynamically display intramolecular excimer formation, which can be used to identify anions through the change of fluorescence.

Anthracene-conjugated octameric silsesquioxane (AnSQ) cages, prepared via Heck coupling between octavinylsilsesquioxane (OVS) and 9-bromoanthracene, thermodynamically display intramolecular excimer emissions. More importantly, these hosts are sensitive to each anionic guest, thereby resulting in change of anthracene excimer formation, displaying the solvent-dependent fluorescence and allowing us to distinguish up to four ions such as F^–, OH^–, CN^– and PO₄^3– by fluorescence spectroscopy. Depending on the solvent polarity, for example, both F^– and CN^– quenched the fluorescence emission intensity in THF, but only F^– could enhance the fluorescence in all other solvents. The presence of PO₄^3– results in fluorescence enhancements in high polarity solvents such as DMSO, DMF, and acetone, while OH^– induces enhancements only in low polarity solvents (e.g. DCM and toluene). A picture of the anion recognizing ability of AnSQ was obtained through principal component analysis (PCA) with NMR and FTIR confirming the presence of host–guest interactions. Computational modeling studies demonstrate the conformation of host–guest complexation and also the change of excimer formation. Detection of F^–, CN^– and OH^– by AnSQ hosts in THF is noticeable with the naked eye, as indicated by strong color changes arising from charge transfer complex formation upon anion addition.

Beads-on-String-Shaped Poly(azomethine) Applicable for Solution Processing of Bilayer Devices Using a Same Solvent

Solvent-based deposition techniques for fabrication of organic field-effect transistors (OFETs) generally require orthogonal solvents for deposition of a conjugated polymer layer on a polymer gate insulator layer. Here, we found significantly reduced dissolution rate of the polymeric film in the same solvent after casting a homegeneous polymerization solution of para-bis(3-aminopropyl)hexaisobutyl-substituted T₈ cage (1) with terephthalaldehyde. The limited dissolution rate in the solvent provided enough chance for fabrication of a regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) layer on the present polymer films without using an orthogonal solvent. The rheological properties indicate that physical interaction between the polymer chains provides the significantly reduced dissolution rate after the deposition onto a substrate without any cross-linking treatments.

Silsesquioxane cages as fluoride sensors

Pyrene functionalized silsesquioxane cages (PySQ) not only provide significant fluorescence from pyrene-pyrene excimers with a very large Stokes shift (Δλ = 143 nm, 69 930 cm^-1) in DMSO but also exhibit fluoride capture results coincidentally with a π-π* fluorescence enhancement. On the other hand, PySQ-F^- in THF significantly exhibits π-π* fluorescence quenching and a color change can be observed with the naked eye from light yellow to deep orange by forming a charge-transfer (CT) complex among the pyrenyl rings. Moreover, PySQ selectively captures F^- with a response time of <2 min and with a very low detection limit (1.61 ppb), while ¹⁹F NMR is used to confirm encapsulation of F^- with Δδ = 19 ppm.

Open-cage silsesquioxane necklace polymers having closed-cage silsesquioxane pendants

A novel POSS monomer design has been proposed; a closed-cage POSS was tethered to an open-cage POSS, and the remaining two functional groups were employed for polymerization. The thermal and optical properties of the obtained main-chain type POSS polymers can be widely tuned by the substituents at the corners of the POSSs.

Rh-catalyzed direct arylation of a polyhedral oligomeric silsesquioxane

Conjugation of a polyhedral oligomeric silsesquioxane (POSS) with the π-electrons of functional organic units has recently attracted much attention. This is the first example of catalytic direct arylation of a POSS.

Cubic Siloxanes with Both Si-H and Si-OtBu Groups for Site-Selective Siloxane Bond Formation

Cage-type siloxanes have attracted increasing attention as building blocks for silica-based nanomaterials as their corners can be modified with various functional groups. Cubic octasiloxanes incorporating both Si-H and Si-OtBu groups [(tBuO)_n H_8-n Si₈ O₁₂ ; n=1, 2 or 7] have been synthesized by the reaction of octa(hydridosilsesquioxane) (H₈ Si₈ O₁₂ ) and tert-butyl alcohol in the presence of a Et₂ NOH catalyst. The Si-H and Si-OtBu groups are useful for site-selective formation of Si-O-Si linkages without cage structure deterioration. The Si-H group can be selectively hydrolyzed to form a Si-OH group in the presence of Et₂ NOH, enabling the formation of the monosilanol compound (tBuO)₇ (HO)Si₈ O₁₂ . The Si-OH group can be used for either intermolecular condensation to form a dimeric cage compound or silylation to introduce new reaction sites. Additionally, the alkoxy groups of (tBuO)₇ HSi₈ O₁₂ can be treated with organochlorosilanes in the presence of a BiCl₃ catalyst to form Si-O-Si linkages, while the Si-H group remains intact. These results indicate that such bifunctional cage siloxanes allow for stepwise Si-O-Si bond formation to design new siloxane-based nanomaterials.

Organic–inorganic polyimides with double decker silsesquioxane in the main chains

In this contribution, we report the synthesis of organic–inorganic polyimides with double decker silsesquioxane in the main chains with a novel and well-defined POSS diamine.

Synthesis and properties of polyimides containing hexaisobutyl-substituted T8 cages in their main chains

We prepared two types of polyimides containing T₈ cages in the main chains by polymerization of para-substituted bis(3-aminopropyl)hexaisobutyl-substituted T₈ cage, and studied their mechanical, thermal, and optical properties.

Interaction of organodialkoxysilanolates with carbon dioxide

A series of organo(alkoxy)disiloxanes was obtained by the reaction of CO₂with sodium alkoxy(organo)silanolates under high pressure. It is suggested that the reaction involves intermediate formation of the carbonate derivative of sodium alkoxy(organo)silanolates.