Replacing poly(ethylene glycol) with RAFT lipopolymers in mRNA lipid nanoparticle systems for effective gene delivery

Lipid nanoparticles (LNPs) have emerged as promising carriers to efficiently transport mRNA into cells for protein translation, as seen with the mRNA vaccines used against COVID-19. However, they contain a widely used polymer - poly(ethylene glycol) (PEG) - which lacks the functionality to be easily modified (which could effectively control the physicochemical properties of the LNPs such as its charge), and is also known to be immunogenic. Thus, it is desirable to explore alternative polymers which can replace the PEG component in mRNA LNP vaccines and therapeutics, while still maintaining their efficacy. Herein, we employed reversible addition-fragmentation chain transfer (RAFT) polymerisation to synthesise five PEG-lipid alternatives that could stabilise LNPs encapsulating mRNA or pDNA molecules. Importantly, the resultant RAFT lipopolymer LNPs exhibit analogous or higher in vivo gene expression and antigen-specific antibody production compared to traditional PEG-based formulations. Our synthesis strategy which allows the introduction of positive charges along the lipopolymer backbone also significantly improved the in vivo gene expression. This work expands the potential of RAFT polymer-conjugated LNPs as promising mRNA carriers and offers an innovative strategy for the development of PEG-free mRNA vaccines and therapeutics.

Drug Delivery Systems of Betulin and Its Derivatives: An Overview

Natural origin products are regarded as promising for the development of new therapeutic therapies with improved effectiveness, biocompatibility, reduced side effects, and low cost of production. Betulin (BE) is very promising due to its wide range of pharmacological activities, including its anticancer, antioxidant, and antimicrobial properties. However, despite advancements in the use of triterpenes for clinical purposes, there are still some obstacles that hinder their full potential, such as their hydrophobicity, low solubility, and poor bioavailability. To address these concerns, new BE derivatives have been synthesized. Moreover, drug delivery systems have emerged as a promising solution to overcome the barriers faced in the clinical application of natural products. The aim of this manuscript is to summarize the recent achievements in the field of delivery systems of BE and its derivatives. This review also presents the BE derivatives mostly considered for medical applications. The electronic databases of scientific publications were searched for the most interesting achievements in the last ten years. Thus far, it is mostly nanoparticles (NPs) that have been considered for the delivery of betulin and its derivatives, including organic NPs (e.g., micelles, conjugates, liposomes, cyclodextrins, protein NPs), inorganic NPs (carbon nanotubes, gold NPs, silver), and complex/hybrid and miscellaneous nanoparticulate systems. However, there are also examples of microparticles, gel-based systems, suspensions, emulsions, and scaffolds, which seem promising for the delivery of BE and its derivatives.

Morphology Control via RAFT Emulsion Polymerization-Induced Self-Assembly: Systematic Investigation of Core-Forming Blocks

Polymerization-induced self-assembly (PISA) is a useful formulation for readily obtaining nanoparticles from block copolymers in situ. Reversible addition-fragmentation chain-transfer (RAFT) emulsion polymerization is utilized as one of the PISA formulations. Various factors have so far been investigated for obtaining nonspherical particles via RAFT emulsion polymerization, such as the steric structure of the shell, the glass-transition temperature (T _g) of the core-forming block, and the water solubility of the core-forming monomer. This study focuses on core-forming blocks without changing the structure of the shell-forming block. In particular, we elucidate the balance between T _g for the core-forming block and the water solubility of the core monomer. A series of alkyl methacrylates, such as methyl methacrylate (MMA), ethyl methacrylate (EMA), and n-propyl methacrylate (PrMA), are emulsion-polymerized in the presence of a poly[poly(ethylene glycol) methyl ether methacrylate] (PPEGMA) macromolecular chain-transfer agent via the RAFT process. The resulting in situ morphology changes to form shapes such as spheres, worms (toroids), and vesicles are systematically investigated. The properties of the core that determine whether a morphological change occurs from spheres are (i) the solubility of the core-forming monomer in water, (ii) the relationship between T _g for the core-forming block and the polymerization temperature, and (iii) the hydrophobic core volume, which changes the packing parameter. These factors allow prediction of the block copolymer morphology produced during RAFT emulsion polymerization of other methacrylates such as n-butyl methacrylate (BuMA), tetrahydrofurfuryl methacrylate (THFMA) with physical properties of the homopolymer (poly(tetrahydrofurfuryl methacrylate) (PTHFMA)) between those for poly(MMA) (PMMA) and PBuMA, and 1-adamantyl methacrylate (ADMA) with low monomer solubility in water and high T _g of the homopolymer (PADMA).

Transformer-Induced Metamorphosis of Polymeric Nanoparticle Shape at Room Temperature

Controlled polymerizations have enabled the production of nanostructured materials with different shapes, each exhibiting distinct properties. Despite the importance of shape, current morphological transformation strategies are limited in polymer scope, alter the chemical structure, require high temperatures, and are fairly tedious. Herein we present a rapid and versatile morphological transformation strategy that operates at room temperature and does not impair the chemical structure of the constituent polymers. By simply adding a molecular transformer to an aqueous dispersion of polymeric nanoparticles, a rapid evolution to the next higher-order morphology was observed, yielding a range of morphologies from a single starting material. Significantly, this approach can be applied to nanoparticles produced by disparate block copolymers obtained by various synthetic techniques including emulsion polymerization, polymerization-induced self-assembly and traditional solution self-assembly.

Shape-Controlled Nanoparticles from a Low-Energy Nanoemulsion

Nanoemulsion technology enables the production of uniform nanoparticles for a wide range of applications. However, existing nanoemulsion strategies are limited to the production of spherical nanoparticles. Here, we describe a low-energy nanoemulsion method to produce nanoparticles with various morphologies. By selecting a macro-RAFT agent (poly(di(ethylene glycol) ethyl ether methacrylate-co-N-(2-hydroxypropyl) methacrylamide) (P(DEGMA-co-HPMA))) that dramatically lowers the interfacial tension between monomer droplets and water, we can easily produce nanoemulsions at room temperature by manual shaking for a few seconds. With the addition of a common ionic surfactant (SDS), these nanoscale droplets are robustly stabilized at both the formation and elevated temperatures. Upon polymerization, we produce well-defined block copolymers forming nanoparticles with a wide range of controlled morphologies, including spheres, worm balls, worms, and vesicles. Our nanoemulsion polymerization is robust and well-controlled even without stirring or external deoxygenation. This method significantly expands the toolbox and availability of nanoemulsions and their tailor-made polymeric nanomaterials.

HPMA Copolymer-Based Nanomedicines in Controlled Drug Delivery

Recently, numerous polymer materials have been employed as drug carrier systems in medicinal research, and their detailed properties have been thoroughly evaluated. Water-soluble polymer carriers play a significant role between these studied polymer systems as they are advantageously applied as carriers of low-molecular-weight drugs and compounds, e.g., cytostatic agents, anti-inflammatory drugs, antimicrobial molecules, or multidrug resistance inhibitors. Covalent attachment of carried molecules using a biodegradable spacer is strongly preferred, as such design ensures the controlled release of the drug in the place of a desired pharmacological effect in a reasonable time-dependent manner. Importantly, the synthetic polymer biomaterials based on N-(2-hydroxypropyl) methacrylamide (HPMA) copolymers are recognized drug carriers with unique properties that nominate them among the most serious nanomedicines candidates for human clinical trials. This review focuses on advances in the development of HPMA copolymer-based nanomedicines within the passive and active targeting into the place of desired pharmacological effect, tumors, inflammation or bacterial infection sites. Specifically, this review highlights the safety issues of HPMA polymer-based drug carriers concerning the structure of nanomedicines. The main impact consists of the improvement of targeting ability, especially concerning the enhanced and permeability retention (EPR) effect.

Cationic Amphiphilic Alternating Copolymers with Tunable Morphology

A series of ionic amphiphilic alternating copolymers were characterized via SAXS, TEM and DLS to help understand factors that could potentially affect self-assembly, including the degree of polymerization, the length of hydrophobic spacers between ionic units, the distance between charged groups and polymer backbone, solvent envrioment and counterions.

Well-Defined Thermo-Responsive Copolymers Based on Oligo(Ethylene Glycol) Methacrylate and Pentafluorostyrene for the Removal of Organic Dyes from Water

Thermo-responsive copolymers based on oligo(ethylene glycol) methacrylate (OEGMA, Mn = 300 g/mol) and pentafluorostyrene (PFS), coded PFG, were synthesized by RAFT polymerization, using a trithiocarbonate (CTTPC) as controlling agent. Different molar masses were targeted and dispersities lower than 1.51 were obtained. The thermally triggered self-assembly of the resulting PFG copolymers in water was investigated by dynamic light scattering (DLS). The lower critical solution temperature (LCST) slightly increased with the molecular weight in the 26-30 °C temperature range, whereas the sizes of the intermicellar aggregates formed upon self-assembly tended to decrease with increasing molecular weights (ranging from 1415 to 572 nm). The resulting thermally-induced polymer aggregates were then used to encapsulate and remove organic contaminants from water. Nile Red (NR) and Thiazole yellow G (TYG) were employed as hydrophobic and hydrophilic model contaminants, respectively. Experimental results evidenced that higher molecular weight copolymers removed up to 90% of NR from aqueous solution, corresponding to about 10 mg of dye per g of copolymer, regardless of NR concentration. The removal of TYG was lower with respect to NR, decreasing from about 40% to around 20% with TYG concentration. Finally, the copolymers were shown to be potentially recycled and reused in the treatment of contaminated water.

Cellular Interactions of Liposomes and PISA Nanoparticles during Human Blood Flow in a Microvascular Network

A key concept in nanomedicine is encapsulating therapeutic or diagnostic agents inside nanoparticles to prolong blood circulation time and to enhance interactions with targeted cells. During circulation and depending on the selected application (e.g., cancer drug delivery or immune modulators), nanoparticles are required to possess low or high interactions with cells in human blood and blood vessels to minimize side effects or maximize delivery efficiency. However, analysis of cellular interactions in blood vessels is challenging and is not yet realized due to the diverse components of human blood and hemodynamic flow in blood vessels. Here, the first comprehensive method to analyze cellular interactions of both synthetic and commercially available nanoparticles under human blood flow conditions in a microvascular network is developed. Importantly, this method allows to unravel the complex interplay of size, charge, and type of nanoparticles on their cellular associations under the dynamic flow of human blood. This method offers a unique platform to study complex interactions of any type of nanoparticles in human blood flow conditions and serves as a useful guideline for the rational design of liposomes and polymer nanoparticles for diverse applications in nanomedicine.

Direct Comparison of Poly(ethylene glycol) and Phosphorylcholine Drug-Loaded Nanoparticles In Vitro and In Vivo

Phosphorylcholine is known to repel the absorption of proteins onto surfaces, which can prevent the formation of a protein corona on the surface of nanoparticles. This can influence the fate of nanoparticles used for drug delivery. This material could therefore serve as an alternative to poly(ethylene glycol) (PEG). Herein, the synthesis of different particles prepared by polymerization-induced self-assembly (PISA) coated with either poly(ethylene glycol) (PEG) or zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) and 4-(N-(S-penicillaminylacetyl)amino) phenylarsenonous acid (PENAO) was reported. The anticancer drug 4-(N-(S-penicillaminylacetyl)amino) phenylarsenonous acid (PENAO) was conjugated to the shell-forming block. Interactions of the different coated nanoparticles, which present comparable sizes and size distributions (76-85 nm, PDI = 0.067-0.094), with two-dimensional (2D) and three-dimensional (3D) cultured cells were studied, and their cytotoxicities, cellular uptakes, spheroid penetration, and cell localization profiles were analyzed. While only a minimal difference in behaviour was observed for nanoparticles assessed using in vitro experiment (with PEG-co- PENAO-coated micelles showing slightly higher cytotoxicity and better spheroid penetration and cell localization ability), the effect of the different physicochemical properties between nanoparticles had a more dramatic effect on in vivo biodistribution. After 1 h of injection, the majority of the MPC-co-PENAO-coated nanoparticles were found to accumulate in the liver, making this particle system unfeasible for future biological studies.

Wormlike Nanovector with Enhanced Drug Loading Using Blends of Biodegradable Block Copolymers

The application of nanoparticles comprising amphiphilic block copolymers for the delivery of drugs is a subject of great interest as they hold promise for more effective and selective therapies. In order to achieve this ambition, it is of critical importance to develop our understanding of the self-assembly mechanisms by which block copolymers undergo so that we can control their morphology, tune their ability to be loaded with biofunctional cargoes, and optimize their interactions with target cells. To this end, we have developed a strategy by which blends of (biocompatible) amphiphilic block copolymers generate nonspherical nanovectors, simultaneously enhancing drug loading without the need for subsequent purification owing to the use of the biocompatible direct hydration approach. The principal morphology achieved using this blending strategy are wormlike nanovectors (nanoworms, NWs), with an elongated form known to have a profound effect on flow behavior and interactions with cells. Unloaded nanoworms are not toxic toward human retinal (ARPE-19) cells and can be effectively endocytosed even after varying the surface charge. In terms of drug loading, we demonstrate that uptake of dexamethasone (DEX; a clinically relevant therapeutic agent) in nanoworms (DEX@NWs) can be enhanced using this process, increasing drug content up to 0.5 mg/mL (10 wt % in particles). Furthermore, such nanoworms are stable for at least 5 months and are, therefore, a promising platform for nanomedicine applications.

The Importance of Poly(ethylene glycol) Alternatives for Overcoming PEG Immunogenicity in Drug Delivery and Bioconjugation

Poly(ethylene glycol) (PEG) is widely used as a gold standard in bioconjugation and nanomedicine to prolong blood circulation time and improve drug efficacy. The conjugation of PEG to proteins, peptides, oligonucleotides (DNA, small interfering RNA (siRNA), microRNA (miRNA)) and nanoparticles is a well-established technique known as PEGylation, with PEGylated products have been using in clinics for the last few decades. However, it is increasingly recognized that treating patients with PEGylated drugs can lead to the formation of antibodies that specifically recognize and bind to PEG (i.e., anti-PEG antibodies). Anti-PEG antibodies are also found in patients who have never been treated with PEGylated drugs but have consumed products containing PEG. Consequently, treating patients who have acquired anti-PEG antibodies with PEGylated drugs results in accelerated blood clearance, low drug efficacy, hypersensitivity, and, in some cases, life-threatening side effects. In this succinct review, we collate recent literature to draw the attention of polymer chemists to the issue of PEG immunogenicity in drug delivery and bioconjugation, thereby highlighting the importance of developing alternative polymers to replace PEG. Several promising yet imperfect alternatives to PEG are also discussed. To achieve asatisfactory alternative, further joint efforts of polymer chemists and scientists in related fields are urgently needed to design, synthesize and evaluate new alternatives to PEG.

Rapid synthesis of PEGylated multiblock polymers by sequence-controlled polymerization in H2O

Multiblock polymers with a poly(ethylene glycol) (PEG) block are attractive candidates for biomedical applications because of their favorable properties regarding biocompatibility and hydrophilicity.

Trending methods employed for polymerization induced self-assembly

Mother Nature produces a perfectly defined architecture that inspires researchers to make polymeric macromolecules for an array of functions. The present article describes recent development in the PISA to synthesize polymeric nano-objects.

Preparation of fluoropolymer materials with different porous morphologies by an emulsion template method using supercritical carbon dioxide as a medium

The choice of a suitable surfactant is key to the formation of a stable water-in-CO2 (W/C) or CO2-in-water (C/W) emulsion. It is even more critical in stabilization of the emulsion containing carbon dioxide (CO2). In this study, the successful preparation of W/C emulsion was achieved by using the amphiphilic block polymer poly(ethylene glycol) methyl ether-b-poly(trifluoroethyl methacrylate) (mPEG45-b-(TFEMA) n ) as a surfactant, in which CO2 was used as a solvent for the fluoromonomer, trifluoroethyl methacrylate (TFEMA). In the case of the W/C emulsion, CO2 and TFEMA were used as the continuous phase and water as the internal phase of the emulsion system. It has been found that in the length of the block polymer mPEG45-b-(TFEMA) n , the fluorine-containing chain end has a significant effect on the morphology of the polymer and the type of emulsion formed. The morphology of the polymer was observed by scanning electron microscopy which confirmed the type of emulsion formed. With the fluorine-containing end segment, the morphology of the polymer changes from a small hollow sphere in a large hollow sphere to a hollow spherical to a porous structure. Correspondingly, it could be concluded that the type of emulsion could go through the process from water-in-CO2-in-water-in-CO2 (W/C/W/C) emulsion to water-in-CO2-in-water (W/C/W) emulsion to water-in-CO2 (W/C) emulsion. Also, suitable co-surfactants were identified in this study. Investigations were also attempted to check the effect of the amount of surfactant, cross-linker and water/CO2 ratio on the type of emulsion formed as well as the morphology of the resultant polymer.

Aqueous one-pot synthesis of epoxy-functional diblock copolymer worms from a single monomer: new anisotropic scaffolds for potential charge storage applications

The one-pot synthesis of highly anisotropic epoxy-functional diblock copolymer worms is achieved directly in water using a single monomer (glycidyl methacrylate).

UV-induced vesicle to micelle transition: a mechanistic study

The morphology of self-assembled block copolymer aggregates is highly dependent on the relative volume fraction of the hydrophobic block.

Bioresorbable filomicelles for targeted delivery of betulin derivative - In vitro study

Filomicelles (worm-like micelles) possess high drug loading capacity and long circulation time in the bloodstream. A novel approach can be filomicelles with folic acid (FA) as a targeting moiety. Folate-drug delivery systems can target FA receptors (FAR) that are overexpressed in several human carcinomas, which can potentially maximize therapeutic efficacy while minimizing side effects. The aim of this study was to develop filomicelles from combination of poly(L-lactide)-Jeffamine-folic acid and poly(L-lactide)-poly(ethylene glycol) for delivery of betulin derivative. Phosphate derivative of betulin reveals high cytotoxicity against cancer cells, however its application is restricted due to poor solubility in water. Incorporation into hydrophobic core of micelles can effectively solubilize the drug. Three kinds of micelles were obtained with high drug loading capacity. Based on TEM analysis, the copolymers formed exclusively filomicelles or mixture of filomicelles and spherical micelles. All kinds of micelles provided release of betulin derivative for over 9 days and apart the very initial phase displayed similar release profile. The influence of PLA block on initial burst effect was revealed. The in vitro cytotoxicity of betulin derivative loaded micelles against FAR-positive HeLa cells was confirmed, which proves their usefulness for targeted delivery of cytostatic drug.

Controlling Nanomaterial Size and Shape for Biomedical Applications via Polymerization-Induced Self-Assembly

Rapid developments in the polymerization-induced self-assembly (PISA) technique have paved the way for the environmentally friendly production of nanoparticles with tunable size and shape for a diverse range of applications. In this feature article, the biomedical applications of PISA nanoparticles and the substantial progress made in controlling their size and shape are highlighted. In addition to early investigations into drug delivery, applications such as medical imaging, tissue culture, and blood cryopreservation are also described. Various parameters for controlling the morphology of PISA nanoparticles are discussed, including the degree of polymerization of the macro-CTA and core-forming polymers, the concentration of macro-CTA and core-forming monomers, the solid content of the final products, the solution pH, the thermoresponsitivity of the macro-CTA, the macro-CTA end group, and the initiator concentration. Finally, several limitations and challenges for the PISA technique that have been recently addressed, along with those that will require further efforts into the future, will be highlighted.

Elucidating the Influences of Size, Surface Chemistry, and Dynamic Flow on Cellular Association of Nanoparticles Made by Polymerization-Induced Self-Assembly

The size and surface chemistry of nanoparticles dictate their interactions with biological systems. However, it remains unclear how these key physicochemical properties affect the cellular association of nanoparticles under dynamic flow conditions encountered in human vascular networks. Here, the facile synthesis of novel fluorescent nanoparticles with tunable sizes and surface chemistries and their association with primary human umbilical vein endothelial cells (HUVECs) is reported. First, a one-pot polymerization-induced self-assembly (PISA) methodology is developed to covalently incorporate a commercially available fluorescent dye into the nanoparticle core and tune nanoparticle size and surface chemistry. To characterize cellular association under flow, HUVECs are cultured onto the surface of a synthetic microvascular network embedded in a microfluidic device (SynVivo, INC). Interestingly, increasing the size of carboxylic acid-functionalized nanoparticles leads to higher cellular association under static conditions but lower cellular association under flow conditions, whereas increasing the size of tertiary amine-decorated nanoparticles results in a higher level of cellular association, under both static and flow conditions. These findings provide new insights into the interactions between polymeric nanomaterials and endothelial cells. Altogether, this work establishes innovative methods for the facile synthesis and biological characterization of polymeric nanomaterials for various potential applications.

Overcoming Surfactant-Induced Morphology Instability of Noncrosslinked Diblock Copolymer Nano-Objects Obtained by RAFT Emulsion Polymerization

RAFT emulsion polymerization techniques including polymerization-induced self-assembly (PISA) and temperature-induced morphological transformation (TIMT) are widely used to produce noncrosslinked nano-objects with various morphologies. However, the worm, vesicle and lamellar morphologies produced by these techniques typically cannot tolerate the presence of added surfactants, thus limiting their potential applications. Herein we report the surfactant tolerance of noncrosslinked worms, vesicles, and lamellae prepared by RAFT emulsion polymerizations using poly(di(ethylene glycol) ethyl ether methacrylate-co-N-(2-hydroxypropyl) methacrylamide) (P(DEGMA-co-HPMA)) as a macromolecular chain transfer agent (macro-CTA). Significantly, these P(DEGMA-co-HPMA) nanoparticles are highly stable in concentrated solutions of surfactants (e.g., sodium dodecyl sulfate (SDS)). We also demonstrate that the surfactant tolerance is related to the limited binding of SDS to the main-chain of the P(DEGMA-co-HPMA) macro-CTA constituting the particle shell. This work provides new insight into the interactions between surfactants and thermoresponsive copolymers and expands the scope of RAFT emulsion polymerization techniques for the preparation of noncrosslinked and surfactant-tolerant nanomaterials.

Facile fabrication of positively-charged helical poly(phenyl isocyanide) modified multi-stimuli-responsive nanoassembly capable of high efficiency cell-penetrating, ratiometric fluorescence imaging, and rapid intracellular drug release

High efficiency cell-penetrating helical chain functionalized polymeric micelles capable of co-delivery of cargoes and rapid release were reported.

Toward Sulfur-Free RAFT Polymerization Induced Self-Assembly

Polymerization induced self-assembly (PISA) using methacrylate-based macromonomers as RAFT agents is an unexplored, attractive route to make self-assembled colloidal objects. The use of this class of RAFT-agents in heterogeneous polymerizations is however not trivial, because of their inherent low reactivity. In this work we demonstrate that two obstacles need to be overcome, one being control of chain-growth (propagation), the other monomer partitioning. Batch dispersion polymerizations of hydroxypropyl methacrylate in the presence of poly(glycerol methacrylate) macromonomers in water showed limited control of chain-growth. Semicontinuous experiments whereby monomer was fed improved results only to some extent. Control of propagation is essential for PISA to allow for dynamic rearrangement of colloidal structures. We tackled the problem of monomer partitioning (caused by uncontrolled particle nucleation) by starting the polymerization with an amphiphilic thermoresponsive diblock copolymer, already "phase-separated" from solution. TEM analysis showed that PISA was successful and that different particle morphologies were obtained throughout the polymerization.

Surfactant-Free RAFT Emulsion Polymerization of Styrene Using Thermoresponsive macroRAFT Agents: Towards Smart Well-Defined Block Copolymers with High Molecular Weights

The combination of reversible addition⁻fragmentation chain transfer (RAFT) and emulsion polymerization has recently attracted much attention as a synthetic tool for high-molecular-weight block copolymers and their micellar nano-objects. Up to recently, though, the use of thermoresponsive polymers as both macroRAFT agents and latex stabilizers was impossible in aqueous media due to their hydrophobicity at the usually high polymerization temperatures. In this work, we present a straightforward surfactant-free RAFT emulsion polymerization to obtain thermoresponsive styrenic block copolymers with molecular weights of around 100 kDa and their well-defined latexes. The stability of the aqueous latexes is achieved by adding 20 vol % of the cosolvent 1,4-dioxane (DOX), increasing the phase transition temperature (PTT) of the used thermoresponsive poly(N-acryloylpyrrolidine) (PAPy) macroRAFT agents above the polymerization temperature. Furthermore, this cosolvent approach is combined with the use of poly(N,N-dimethylacrylamide)-block-poly(N-acryloylpiperidine-co-N-acryloylpyrrolidine) (PDMA-b-P(APi-co-APy)) as the macroRAFT agent owning a short stabilizing PDMA end block and a widely adjustable PTT of the P(APi-co-APy) block in between 4 and 47 °C. The temperature-induced collapse of the latter under emulsion polymerization conditions leads to the formation of RAFT nanoreactors, which allows for a very fast chain growth of the polystyrene (PS) block. In dynamic light scattering (DLS), as well as cryo-transmission electron microscopy (cryoTEM), moreover, all created latexes indeed reveal a high (temperature) stability and a reversible collapse of the thermoresponsive coronal block upon heating. Hence, this paper pioneers a versatile way towards amphiphilic thermoresponsive high-molecular-weight block copolymers and their nano-objects with tailored corona switchability.

Polymerization-Induced Self-Assembly: The Effect of End Group and Initiator Concentration on Morphology of Nanoparticles Prepared via RAFT Aqueous Emulsion Polymerization

Polymerization-induced self-assembly (PISA) is a widely used technique for the synthesis of nanoparticles with various morphologies including spheres, worms, and vesicles. The development of a PISA formulation based on reversible addition-fragmentation chain transfer (RAFT) aqueous emulsion polymerization offers considerable advantages such as enhanced rate of polymerization, high conversion and environmentally friendly conditions. However, this formulation has typically produced spheres as opposed to worms and vesicles. Herein, we report the formation of vesicle morphology by increasing the RAFT end-group hydrophobicity of the macromolecular chain transfer agent or manipulating the radical initiator concentration used in the aqueous emulsion polymerization PISA formulation. Additionally, decreasing the molecular weight of the hydrophobic polystyrene domain in these vesicles leads to the formation of worms. This work demonstrates that RAFT end-group hydrophobicity and radical initiator concentration are key parameters which can be exploited to enable access to sphere, worm, and vesicle morphologies via the RAFT aqueous emulsion polymerization.

Self-assembly of poly(lauryl methacrylate)-b-poly(benzyl methacrylate) nano-objects synthesised by ATRP and their temperature-responsive dispersion properties

Self-assembling poly(lauryl methacrylate)-b-poly(benzyl methacrylate) (PLMA_x-PBzMA_y) diblock copolymers were synthesised for the first time using solution atom transfer radical polymerisation (ATRP). The PLMA degree of polymerisation (x) was fixed at 14 and the PBzMA degree of polymerisation (y) was varied from 34 to 74. Post-polymerisation transfer of this new series of diblock copolymers from chloroform into n-dodecane (a poor solvent for PBzMA) resulted in self-assembly of polymeric nano-objects. The morphologies for the latter (spheres, worms and vesicles) were controlled by y. The observed morphologies generally agreed with those reported for related PLMA_x-PBzMA_y diblock copolymers (x ≥ 16) prepared by polymerisation induced self-assembly (PISA) via reversible addition-fragmentation chain transfer (RAFT) polymerisation (Fielding et al., J. Am. Chem. Soc., 2014, 136, 5790). However, a number of differences were observed such as de-gelation behaviour and the phase boundary positions compared to those expected from Fielding et al. Variable-temperature dynamic light scattering studies for the PLMA₁₄-PBzMA₃₄ spheres revealed that the aggregation number was unaffected by a temperature increase over the range of 20-90 °C, which differed markedly from the behaviour observed for PLMA₁₄-PBzMA₆₄ worms. This difference is a new observation with mechanistic importance for the worm-to-sphere breakdown mechanism. We show that concentrated PLMA₁₄-PBzMA_y dispersions (20% w/w) in n-dodecane can be prepared using post-polymerisation transfer. The dispersion with a mixed spherical and worm-like copolymer phase exhibited reversible de-gelation when heated. Surprisingly, the dispersions containing only the worm phase remained as gels (which were white) at temperatures up to 90 °C. Our new ATRP approach for preparing temperature-responsive non-aqueous nano-object dispersions presented here decoupled chain growth and self-assembly and will apply to other copolymer dispersions.

Nitroxide-mediated polymerization-induced self-assembly of amphiphilic block copolymers with a pH/temperature dual sensitive stabilizer block

Comb-like P(PEOMA₃₀₀-co-MAA-co-S)-SG1 macroalkoxyamine terpolymer initiators with dual pH/temperature responsive behavior were synthesized by nitroxide-mediated polymerization and used to control the emulsion polymerization of BMA with a small proportion of styrene.