Review: Quantum Dot Light-Emitting Diodes

Quantum dot light-emitting diodes (QD-LEDs) are one of the most promising self-emissive displays in terms of light-emitting efficiency, wavelength tunability, and cost. Future applications using QD-LEDs can cover a range from a wide color gamut and large panel displays to augmented/virtual reality displays, wearable/flexible displays, automotive displays, and transparent displays, which demand extreme performance in terms of contrast ratio, viewing angle, response time, and power consumption. The efficiency and lifetime have been improved by tailoring the QD structures and optimizing the charge balance in charge transport layers, resulting in theoretical efficiency for unit devices. Currently, longevity and inkjet-printing fabrication of QD-LEDs are being tested for future commercialization. In this Review, we summarize significant progress in the development of QD-LEDs and describe their potential compared to other displays. Furthermore, the critical elements to determine the performance of QD-LEDs, such as emitters, hole/electron transport layers, and device structures, are discussed comprehensively, and the degradation mechanisms of the devices and the issues of the inkjet-printing process were also investigated.

Photophysical Properties of Linear, Net-structured and Branched Polybenzimidazoles

Polybenzimidazoles with three different network structures are synthesized by condensation polymerization between the conventional monomer 3,3'-Diaminobenzidine and three different acid monomers. The synthesised polymer networks are characterized using several characterization techniques such as FT-IR, powder XRD, HR-SEM and TG-DTA analyses. The polybenzimidazoles are amorphous in nature with excellent thermal stability up to 450 ºC. The photophysical properties of polybenzimidazoles are studied using UV-visible absorption and Emission spectral techniques. Further, the excited state photoluminescence decay time measurement shows a functional group dependant decay behaviour. All the three polymers display narrow optical band gap energy and could be applied as a material for solar energy conversion and semiconductors.

Polymer Dots with Enhanced Photostability, Quantum Yield, and Two-Photon Cross-Section using Structurally Constrained Deep-Blue Fluorophores

Semiconducting polymer dots (Pdots) have emerged as versatile probes for bioanalysis and imaging at the single-particle level. Despite their utility in multiplexed analysis, deep blue Pdots remain rare due to their need for high-energy excitation and sensitivity to photobleaching. Here, we describe the design of deep blue fluorophores using structural constraints to improve resistance to photobleaching, two-photon absorption cross sections, and fluorescence quantum yields using the hexamethylazatriangulene motif. Scanning tunneling microscopy was used to characterize the electronic structure of these chromophores on the atomic scale as well as their intrinsic stability. The most promising fluorophore was functionalized with a polymerizable acrylate handle and used to give deep-blue fluorescent acrylic polymers with M_n > 18 kDa and Đ < 1.2. Nanoprecipitation with amphiphilic polystyrene-graft-(carboxylate-terminated poly(ethylene glycol)) gave water-soluble Pdots with blue fluorescence, quantum yields of 0.81, and molar absorption coefficients of (4 ± 2) × 10⁸ M^-1 cm^-1. This high brightness facilitated single-particle visualization with dramatically improved signal-to-noise ratio and photobleaching resistance versus an unencapsulated dye. The Pdots were then conjugated with antibodies for immunolabeling of SK-BR3 human breast cancer cells, which were imaged using deep blue fluorescence in both one- and two-photon excitation modes.

Effect of Side Chain Substituent Volume on Thermoelectric Properties of IDT-Based Conjugated Polymers

A p-type thermoelectric conjugated polymer based on indacenodithiophene and benzothiadiazole is designed and synthesized by replacing normal aliphatic side chains (P1) with conjugated aromatic benzene substituents (P2). The introduced bulky substituent on P2 is detrimental to form the intensified packing of polymers, therefore, it hinders the efficient transporting of the charge carriers, eventually resulting in a lower conductivity compared to that of the polymers bearing aliphatic side chains (P1). These results reveal that the modification of side chains on conjugated polymers is crucial to rationally designed thermoelectric polymers with high performance.

Syndiospecific coordination (Co)polymerization of carbazole-substituted styrene derivatives using the scandium catalyst system

Perfect syndiospecific polymerization of carbazole-substituted styrene derivatives was achieved using a rare-earth metal catalyst. Also copolymerization of FSt with styrene afforded copolymers with gradient sequence distributions and easily tunable incorporation rate.

Polymer Coated Semiconducting Nanoparticles for Hybrid Materials

This paper reviews synthetic concepts for the functionalization of various inorganic nanoparticles with a shell consisting of organic polymers and possible applications of the resulting hybrid materials. A polymer coating can make inorganic nanoparticles soluble in many solvents as individual particles and not only do low molar mass solvents become suitable, but also polymers as a solid matrix. In the case of shape anisotropic particles (e.g., rods) a spontaneous self-organization (parallel orientation) of the nanoparticles can be achieved, because of the formation of lyotropic liquid crystalline phases. They offer the possibility to orient the shape of anisotropic nanoparticles macroscopically in external electric fields. At least, such hybrid materials allow semiconducting inorganic nanoparticles to be dispersed in functional polymer matrices, like films of semiconducting polymers. Thereby, the inorganic nanoparticles can be electrically connected and addressed by the polymer matrix. This allows LEDs to be prepared with highly fluorescent inorganic nanoparticles (quantum dots) as chromophores. Recent works have aimed to further improve these fascinating light emitting materials.

Highly Efficient and Bright Inverted Top-Emitting InP Quantum Dot Light-Emitting Diodes Introducing a Hole-Suppressing Interlayer

InP quantum dots (QDs) based light-emitting diodes (QLEDs) are considered as one of the most promising candidates as a substitute for the environmentally toxic Cd-based QLEDs for future displays. However, the device architecture of InP QLEDs is almost the same as the Cd-based QLEDs even though the properties of Cd-based and InP-based QDs are quite different in their energy levels and shapes. Thus, it is highly required to develop a proper device structure for InP-based QLEDs to improve the efficiency and stability. In this work, efficient, bright, and stable InP/ZnSeS QLEDs based on an inverted top emission QLED (ITQLED) structure by newly introducing a "hole-suppressing interlayer" are demonstrated. The green-emitting ITQLEDs with the hole-suppressing interlayer exhibit a maximum current efficiency of 15.1-21.6 cd A^-1 and the maximum luminance of 17 400-38 800 cd m^-2 , which outperform the recently reported InP-based QLEDs. The operational lifetime is also increased when the hole-suppressing interlayer is adopted. These superb QLED performances originate not only from the enhanced light-outcoupling by the top emission structure but also from the improved electron-hole balance by introducing a hole-suppressing interlayer which can control the hole injection into QDs.

Quantum-Dot Light-Emitting Diodes for Large-Area Displays: Towards the Dawn of Commercialization

Quantum dots are a unique class of emitters with size-tunable emission wavelengths, saturated emission colors, near-unity luminance efficiency, inherent photo- and thermal- stability and excellent solution processability. Quantum dots have been used as down-converters for back-lighting in liquid-crystal displays to improve color gamut, leading to the booming of quantum-dot televisions in consumer market. In the past few years, efficiency and lifetime of electroluminescence devices based on quantum dots achieved tremendous progress. These encouraging facts foreshadow the commercialization of quantum-dot light-emitting diodes (QLEDs), which promises an unprecedented generation of cost-effective, large-area, energy-saving, wide-color-gamut, ultra-thin and flexible displays. Here we provide a Progress Report, covering interdisciplinary aspects including material chemistry of quantum dots and charge-transporting layers, optimization and mechanism studies of prototype devices and processing techniques to produce large-area and high-resolution red-green-blue pixel arrays. We also identify a few key challenges facing the development of active-matrix QLED displays.

Colloidal quantum-dots surface and device structure engineering for high-performance light-emitting diodes

The application of colloidal quantum dots for light-emitting devices has attracted considerable attention in recent years, due to their unique optical properties such as size-dependent emission wavelength, sharp emission peak and high luminescent quantum yield. Tremendous efforts have been made to explore quantum dots for light-emission applications such as light-emitting diodes (LEDs) and light converters. The performance of quantum-dots-based light-emitting diodes (QD-LEDs) has been increasing rapidly in recent decades as the development of quantum-dots synthesis, surface-ligand engineering and device-architecture optimization. Recently, the external quantum efficiencies of red quantum-dots LEDs have exceeded 20.5% with good stability and narrow emission peak. In this review, we summarize the recent advances in QD-LEDs, focusing on quantum-dot surface engineering and device-architecture optimization.

Synthetic approaches towards structurally-defined electrochemically and (photo)redox-active polymer architectures

This review details synthetic strategies leading to structurally-defined electrochemically and (photo)redox-active polymer architectures,e.g.block, graft and end functionalized (co)polymers.

Subpicosecond Photon-Energy-Dependent Hole Transfer from PbS Quantum Dots to Conjugated Polymers

We use transient absorption (TA) spectroscopy to study the origin of photon-energy dependent hole transfer yields in blends of PbS quantum dots with the conjugated polymer poly(3-hexylthiophene-2,5-diyl) (P3HT). We selectively excite only the quantum dots at two different wavelengths and measure the polymer ground state bleach resulting from the transfer of photoexcited holes. The higher photon-energy pump shows a greater prompt yield of hole transfer compared to the lower photon-energy excitation, on time scales sufficient to out-compete hot carrier cooling in lead chalcogenide quantum dots. We interpret the results as evidence that the excess energy of nonthermalized, or "hot," excitons resulting from higher photon-energy excitation allows more efficient charge transfer to the polymer in these systems. The data also demonstrate slow charge transfer rates, up to ∼1 ns, of the relaxed excitations on the PbS dots. These findings help to clarify the role of excess photon energy and carrier relaxation dynamics on free carrier generation in donor/acceptor solar cells.

Non-conjugated polyurethane polymer dots based on crosslink enhanced emission (CEE) and application in Fe3+ sensing

A novel non-conjugated polymer dot sensor is developed for Fe³⁺ detection based on crosslink enhanced emission.