The Effects of Emulsifier Addition on the Functionalization of a High-Oleic Palm Oil-Based Oleogel

Alternatives to oils with high saturated fatty acid content are often liquid oils (high in unsaturated fatty acids) that have a modified structure created either through additives or processing. Emulsifiers are additives that can be used as structuring agents of liquid fats; this process results in products such as oleogels, which can broaden the applications of these oils. This study assessed and compared the effects of mono- and diglycerides at 3%, 5%, 7% and 10% w/w on the mechanical and thermal properties of high-oleic palm oil (HOPO) oleogels. HOPO was heated to 75 °C and mixed with mono- or diglycerides at those four concentrations. The thermomechanical properties of the melted oleogels were assessed using differential scanning calorimetry (DSC). The melted oleogels were cooled to final temperatures of 5 °C, 10 °C and 15 °C under identical cooling rates, after which a puncture test (via a texture analyzer) was used to assess their textures. Finally, polarized light microscopy was used to assess the mechanical changes induced through emulsifier addition. The results showed that the use of mono- and diglycerides significantly modified the thermal and mechanical properties of the oleogels. The addition of saturated monoglycerides promoted a higher-temperature nucleation stage that did not previously occur in HOPO. The onset crystallization temperature increased with the addition of diglycerides, promoting crystallization at higher temperatures of the high-melting fraction of HOPO. The hardness of the oleogel generally increased with emulsifier addition and a reduction of the temperature. The effect of the temperature on the hardness was significantly greater in the diglyceride oleogel than in the monoglyceride oleogel. This study shows that the addition of mono- and diglycerides allows companies to customize their formulations to achieve desired results that may not previously have been possible, thereby facilitating novel uses for these oils within the industry.

Process Dependent Complexity in Multicomponent Gels

Mixing low molecular weight gelators (LMWGs) can be used to combine favorable properties of the individual components within a multifunctional gel. Such multicomponent systems are complex enough in themselves but the method of combining components is not commonly considered something to influence self-assembly. Herein, two multicomponent systems comprising of a naphthalene-based dipeptide hydrogelator and one of two modified naphthalene diimides (NDIs), one of which forms gels, and the other does not, are investigated. These systems are probed, examining the structures formed and their gel properties (when preparing a solution from either a mixed powder of both components or by mixing pre-formed solutions of each component) using rheology, small angle neutron scattering (SANS), and absorbance spectroscopy. It is found that by altering the method of preparation, it is can either induce self-sorting or co-assembly within the fibers formed that underpin the gel network.

Nano-Theranostics for the Sensing, Imaging and Therapy of Prostate Cancers

We highlight hereby recent developments in the emerging field of theranostics, which encompasses the combination of therapeutics and diagnostics in a single entity aimed for an early-stage diagnosis, image-guided therapy as well as evaluation of therapeutic outcomes of relevance to prostate cancer (PCa). Prostate cancer is one of the most common malignancies in men and a frequent cause of male cancer death. As such, this overview is concerned with recent developments in imaging and sensing of relevance to prostate cancer diagnosis and therapeutic monitoring. A major advantage for the effective treatment of PCa is an early diagnosis that would provide information for an appropriate treatment. Several imaging techniques are being developed to diagnose and monitor different stages of cancer in general, and patient stratification is particularly relevant for PCa. Hybrid imaging techniques applicable for diagnosis combine complementary structural and morphological information to enhance resolution and sensitivity of imaging. The focus of this review is to sum up some of the most recent advances in the nanotechnological approaches to the sensing and treatment of prostate cancer (PCa). Targeted imaging using nanoparticles, radiotracers and biomarkers could result to a more specialised and personalised diagnosis and treatment of PCa. A myriad of reports has been published literature proposing methods to detect and treat PCa using nanoparticles but the number of techniques approved for clinical use is relatively small. Another facet of this report is on reviewing aspects of the role of functional nanoparticles in multimodality imaging therapy considering recent developments in simultaneous PET-MRI (Positron Emission Tomography-Magnetic Resonance Imaging) coupled with optical imaging in vitro and in vivo, whilst highlighting feasible case studies that hold promise for the next generation of dual modality medical imaging of PCa. It is envisaged that progress in the field of imaging and sensing domains, taken together, could benefit from the biomedical implementation of new synthetic platforms such as metal complexes and functional materials supported on organic molecular species, which can be conjugated to targeting biomolecules and encompass adaptable and versatile molecular architectures. Furthermore, we include hereby an overview of aspects of biosensing methods aimed to tackle PCa: prostate biomarkers such as Prostate Specific Antigen (PSA) have been incorporated into synthetic platforms and explored in the context of sensing and imaging applications in preclinical investigations for the early detection of PCa. Finally, some of the societal concerns around nanotechnology being used for the detection of PCa are considered and addressed together with the concerns about the toxicity of nanoparticles–these were aspects of recent lively debates that currently hamper the clinical advancements of nano-theranostics. The publications survey conducted for this review includes, to the best of our knowledge, some of the most recent relevant literature examples from the state-of-the-art. Highlighting these advances would be of interest to the biomedical research community aiming to advance the application of theranostics particularly in PCa diagnosis and treatment, but also to those interested in the development of new probes and methodologies for the simultaneous imaging and therapy monitoring employed for PCa targeting.

Facile Construction of Bio-Based Supramolecular Hydrogels from Dehydroabietic Acid with a Tricyclic Hydrophenanthrene Skeleton and Stabilized Gel Emulsions

Supramolecular hydrogels have attracted great attention due to their special properties. In this research, bio-based supramolecular hydrogels were conveniently constructed by heating and ultrasounding two components of dehydroabietic acid with a rigid tricyclic hydrophenanthrene skeleton and morpholine. The microstructures and properties of hydrogels were investigated by DSC, rheology, SAXS, CD spectroscopy, and cryo-TEM, respectively. The critical gel concentration (CGC) of the hydrogel was 0.3 mol·L⁻¹ and the gel temperature was 115 °C. In addition, the hydrogel showed good stability and mechanical properties according to rheology results. Cryo-TEM images reveal that the microstructure of hydrogel is fibrous meshes; its corresponding mechanism has been studied using FT-IR spectra. Additionally, oil-in-water gel emulsions were prepared by the hydrogel at a concentration above its CGC, and the oil mass fraction of the oil-in-water gel emulsions could be freely adjusted between 5% and 70%. This work provides a convenient way to prepare bio-based supramolecular hydrogels and provides a new method for the application of rosin.

The aging effect on the enhancement of thermal stability, mechanical stiffness and fluorescence properties of histidine-appended naphthalenediimide based two-component hydrogels

A histidine attached naphthalenediimide (NDI)-containing amphiphilic molecule (NDIP) self-assembles into nanotubes in aqueous solution at pH 6.6 as revealed by high-resolution transmission electron microscopy studies. This histidine-appended NDI forms a two-component hydrogel in the presence of tartaric acid at a molar ratio of 1 : 2. A morphological transformation was observed from a nanotube structure in the non-gel aggregated state of histidine appended NDI to interconnected cross-linked nanofibers of the two-component hydrogel in the presence of tartaric acid. Interestingly, the gel exhibits an unusual behavior upon aging compared to the fresh gel. It is found that the thermal stability and gel stiffness increase very significantly upon aging. Another important feature noted is that the very weak fluorescence of the fresh gel is transformed into bright greenish fluorescence upon aging. These results suggest that intermolecular interactions among the gelator molecules and tartaric acid in the gel phase slowly increase with time to form a mechanically very stiff and thermally robust gel.

A Self-Assembled Peptide-Appended Naphthalene Diimide: A Fluorescent Switch for Sensing Acid and Base Vapors

A histidine-containing bola-amphiphilic molecule (NDIP) containing a peptide-appended naphthalenediimide (NDI) forms fluorescent hydrogels in phosphate buffer and organogels with benzenoid solvents. These gels were characterized by several spectroscopic and microscopic techniques including FT-IR, HR-TEM, powder X-ray diffraction and small-angle X-ray scattering, UV-Vis and fluorescence studies. The gelator molecule exhibits no significant fluorescence in the xerogel state, while it shows a significant fluorescence (bright cyan) in the presence of volatile organic/inorganic acid vapors; this cyan color vanishes in presence of base (ammonia vapors). A reusable paper-strip-based method based on this self-assembled fluorescent material can be used to easily detect hazardous volatile acid and base vapors with the naked eye.

Beyond Fmoc: a review of aromatic peptide capping groups

Self-assembling short peptides have attracted widespread interest due to their tuneable, biocompatible nature and have potential applications in energy materials, tissue engineering, sensing and drug delivery. The hierarchical self-assembly of these peptides is highly dependent on the selection of not only amino acid sequence, but also the capping group which is often employed at the N-terminus of the peptide to drive self-assembly. Although the Fmoc (9H-fluorenylmethyloxycarbonyl) group is commonly used due to its utility in solid phase peptide synthesis, many other aromatic capping groups have been reported which yield functional, responsive materials. This review explores recent developments in the utilisation of functional, aromatic capping groups beyond the Fmoc group for the creation of redox-responsive, fluorescent and drug delivering hydrogel scaffolds.

The role of amino acids on supramolecular co-assembly of naphthalenediimide–pyrene based hydrogelators

This report describes the two component self-assembly of π-capped amino acid hydrogelators (serine (S), aspartic acid (D), glutamic acid (E) or lysine (K)) prepared from pyrene (Py) based donor and naphthalenediimide (NDI) based acceptor molecules. The co-assembly can be triggered to form hydrogels by varying the pH conditions and the major driving forces behind the hydrogelation were found to be the formation of a strong charge-transfer (CT) complex and hydrogen bonding interactions at suitable pH conditions. The NDI–Py blends with matched donor/acceptor amino acid pairs undergo self-assembly under acidic pH conditions, whereas the blend (NDI–S + Py–K) with a mismatched amino acid pair forms a stable hydrogel under physiological pH conditions. UV-Vis, FTIR and rheological studies clearly indicate the formation and the stability of these CT-induced hydrogels. These hydrogels are of nanofibrous morphology with an average diameter of about 6–9 nm as evidenced by TEM analysis. In addition, this novel NDI–Py mixed component system exhibited good biocompatibility towards PC3 cells. Overall, since hydrogels based on CT-mediated two-component assemblies are very rare, our newly discovered NDI–Py hydrogels provide chemical insights into the design of a CT-induced hydrogelator and might facilitate various applications in biomedical engineering.

The importance of side chains of amino acids for NDI–Py co-assembled hydrogelation is described.

Fluorescent supramolecular hydrogels self-assembled from tetraphenylethene (TPE)/single amino acid conjugates

TPE-Ser molecules exhibit non-covalent interactions necessary for hydrogelation under physiological pH conditions.

Glyoxylamide-based self-assembly hydrogels for sustained ciprofloxacin delivery

Glyoxylamide-based hydrogels have high ciprofloxacin (CIP) loading capacity and demonstrate a sustained release profile of over 15 days.

Redox-sensitive reversible self-assembly of amino acid-naphthalene diimide conjugates

Peptide and low molecular weight amino acid-based materials that self-assemble in response to environmental triggers are highly desirable candidates in forming functional materials with tunable biophysical properties. In this paper, we explore redox-sensitive self-assembly of cationic phenylalanine derivatives conjugated to naphthalene diimide (NDI). Self-assembly of the cationic Phe-NDI conjugates into nanofibrils was induced in aqueous solvent at high ionic strength. Under reducing conditions, these self-assembled Phe-NDI conjugate fibrils underwent a morphological change to non-fibril aggregates. Upon reoxidation, the initially observed fibrils were reformed. The study herein provides an interesting strategy to effect reversible switching of the structure of supramolecular materials that can be applied to the development of sophisticated stimulus-responsive materials.

Directed assembly of bio-inspired hierarchical materials with controlled nanofibrillar architectures

In natural systems, directed self-assembly of structural proteins produces complex, hierarchical materials that exhibit a unique combination of mechanical, chemical and transport properties. This controlled process covers dimensions ranging from the nano- to the macroscale. Such materials are desirable to synthesize integrated and adaptive materials and systems. We describe a bio-inspired process to generate hierarchically defined structures with multiscale morphology by using regenerated silk fibroin. The combination of protein self-assembly and microscale mechanical constraints is used to form oriented, porous nanofibrillar networks within predesigned macroscopic structures. This approach allows us to predefine the mechanical and physical properties of these materials, achieved by the definition of gradients in nano- to macroscale order. We fabricate centimetre-scale material geometries including anchors, cables, lattices and webs, as well as functional materials with structure-dependent strength and anisotropic thermal transport. Finally, multiple three-dimensional geometries and doped nanofibrillar constructs are presented to illustrate the facile integration of synthetic and natural additives to form functional, interactive, hierarchical networks.

Two-Component Fluorescent-Semiconducting Hydrogel from Naphthalene Diimide-Appended Peptide with Long-Chain Amines: Variation in Thermal and Mechanical Strengths of Gels

Two-component fluorescent hydrogels have been discovered, containing the mixtures of naphthalene diimide (NDI)-conjugated peptide-functionalized bola-amphiphile and primary amines with long alkyl chains at physiological pH 7.46. The aggregation-induced enhanced emission associated with an NDI-appended peptide in aqueous medium is rare, as water is known to be a good quencher of fluorescence. In this study, an NDI-containing gelator peptide forms a highly fluorescent aggregate in aqueous medium. Absorption and emission spectroscopic techniques reveal the formation of J-aggregates among the chromophoric moieties in their aggregated state in aqueous medium. However, this NDI-containing peptide does not form any gel in aqueous medium. In the presence of the primary amines with long alkyl chains in the buffer solution, it forms two-component fluorescent hydrogels exhibiting bright yellow fluorescence under a UV lamp (365 nm). Probably, the acid-amine interaction between the amines and the bola-amphiphile triggers the gel formation, as evident from Fourier transform infrared data, indicating the presence of a carboxylate group (-COO^-) and an ammonium species (NH₃⁺) in the coassembled two-component gel system. Low- and wide-angle powder X-ray diffraction and small-angle X-ray scattering further support the fact that the coassembled state in the gel form is produced by the supramolecular interaction between the NDI-based bola-amphiphile and the long-chain amines. Field-emission scanning electron microscopy and high-resolution transmission electron microscopy images reveal that the π-conjugated coassembled hydrogels exhibit nanofibrillar network morphologies. Interestingly, the coassembled hydrogels exhibit an enhanced fluorescence emission, excited-state lifetime, and quantum yield when compared with those of the NDI-containing amphiphile alone in its self-assembled state in aqueous medium. Moreover, the thermal stability and mechanical strength of these gels have been successfully tuned by varying the alkyl chain length of the corresponding amine. Moreover, these NDI-peptide-conjugated soft materials exhibit semiconducting behavior in their respective coassembled states. This holds future promise to use these peptide-appended NDI-based coassembled soft materials for applications in optoelectronic and other devices.

H-bonding directed programmed supramolecular assembly of naphthalene-diimide (NDI) derivatives

In this review we have collated various supramolecular designs, all surrounding H-bonding among well-known functional groups (peptides, nucleic acids, amides, ureas, carboxylic acids, pyridine-hydroxyls, urethanes, imides and others), to dictate self-assembly of naphthalenediimide (NDI) π-systems (both small molecules and polymeric building blocks) that exhibit several exciting features including strong propensity for π-π interactions, π-acidity, excellent n-type semiconductivity, CT-complexation, ion-π interactions, ring-substitution dependent redox properties and photophysical properties. This article reveals that H-bonding can indeed serve as a very powerful and versatile tool to programmed self-assembly of a single or multiple dye system producing a wide range of tailored soft materials, including fibrillar gels, chromonic mesophases, foldamers, nanotubes, vesicles, reverse micelles and polymersomes, both in water and organic medium with distinct photophysical properties, charge transport properties, conductivity properties and functional group displays that are highly relevant in the fields of biology and organic electronics.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.