Effect of Reaction Temperature on the Microstructure and Properties of Magnesium Phosphate Chemical Conversion Coatings on Titanium

Magnesium phosphate (MgP) has garnered growing interest in hard tissue replacement processes due to having similar biological characteristics to calcium phosphate (CaP). In this study, an MgP coating with the newberyite (MgHPO₄·3H₂O) was prepared on the surface of pure titanium (Ti) using the phosphate chemical conversion (PCC) method. The influence of reaction temperature on the phase composition, microstructure, and properties of coatings was systematically researched with the use of an X-ray diffractometer (XRD), a scanning electron microscope (SEM), a laser scanning confocal microscope (LSCM), a contact angle goniometer, and a tensile testing machine. The formation mechanism of MgP coating on Ti was also explored. In addition, the corrosion resistance of the coatings on Ti was researched by assessing the electrochemical behavior in 0.9% NaCl solution using an electrochemical workstation. The results showed that temperature did not obviously affect the phase composition of the MgP coatings, but affected the growth and nucleation of newberyite crystals. In addition, an increase in reaction temperature had a great impact on properties including surface roughness, thickness, bonding strength, and corrosion resistance. Higher reaction temperatures resulted in more continuous MgP, larger grain size, higher density, and better corrosion resistance.

Chromate-Free Corrosion Protection Strategies for Magnesium Alloys-A Review: PART I-Pre-Treatment and Conversion Coating

Corrosion protection systems based on hexavalent chromium are traditionally perceived to be a panacea for many engineering metals including magnesium alloys. However, bans and strict application regulations attributed to environmental concerns and the carcinogenic nature of hexavalent chromium have driven a considerable amount of effort into developing safer and more environmentally friendly alternative techniques that provide the desired corrosion protection performance for magnesium and its alloys. Part I of this review series considers the various pre-treatment methods as the earliest step involved in the preparation of Mg surfaces for the purpose of further anti-corrosion treatments. The decisive effect of pre-treatment on the corrosion properties of both bare and coated magnesium is discussed. The second section of this review covers the fundamentals and performance of conventional and state-of-the-art conversion coating formulations including phosphate-based, rare-earth-based, vanadate, fluoride-based, and LDH. In addition, the advantages and challenges of each conversion coating formulation are discussed to accommodate the perspectives on their application and future development. Several auspicious corrosion protection performances have been reported as the outcome of extensive ongoing research dedicated to the development of conversion coatings, which can potentially replace hazardous chromium(VI)-based technologies in industries.

Zein/Bioactive Glass Coatings with Controlled Degradation of Magnesium under Physiological Conditions: Designed for Orthopedic Implants

Magnesium and its alloys are widely considered as temporary bio-implants owing to their mechanical properties and biocompatibility. However, the high corrosion rates and degradation in the physiological environment restrict the practical application of Mg as a biomedical device. Therefore, in this study, Zein/45S5 bioactive glass (BG) coatings were deposited via electrophoretic deposition (EPD) on pretreated pure magnesium (Mg) substrates, which controls the rapid degradation of magnesium. The set of EPD parameters was first optimized on stainless steel (SS) and then the optimum EPD parameters were applied to obtain zein/BG composite coatings on Mg substrates. The morphology of the obtained coatings was studied by scanning electron microscopy (SEM). SEM results showed that both zein and BG were successfully deposited on the surface of the Mg substrate. Electrochemical measurements consisting of open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization confirmed that the corrosion resistance of Mg improved after the deposition of zein/BG coatings. The in-vitro bioactivity study was carried out by immersing the zein/BG coatings in simulated body fluid for 3, 7, and 21 days. SEM, energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy results elucidated that the hydroxyapatite layer developed after 21 days of immersion in SBF, which confirmed the bone binding ability of the coatings.

In Vitro Osteocompatibility and Enhanced Biocorrosion Resistance of Diammonium Hydrogen Phosphate-Pretreated/Poly(ether imide) Coatings on Magnesium for Orthopedic Application

Magnesium, as a biodegradable metal, is a promising candidate for biomedical applications. To modify the degradation behavior of magnesium and improve its osteocompatibility, chemical conversion and spin coating methods were combined to develop a diammonium hydrogen phosphate-pretreated/poly(ether imide) (DAHP/PEI) co-coating system. The diammonium hydrogen phosphate pretreatment was employed to enhance the attachment between PEI coatings and the magnesium substrate; meanwhile, it could serve as another bioactive and anticorrosion layer when PEI coatings break down. Surface characterization, electrochemical tests, and short-term immersion tests in DMEM were performed to evaluate DAHP/PEI coatings. Electrochemical measurements showed that DAHP/PEI coatings significantly improved the corrosion resistance of pure magnesium. No obvious changes of the chemical compositions of DAHP/PEI coatings occurred after 72 h of immersion in DMEM. An in vitro cytocompatibility study confirmed that viability and LDH activity of human osteoblast-like cells on DAHP/PEI coatings showed higher values than those on the DAHP-pretreated layer and pure magnesium. The DAHP-pretreated layer could still enhance the ALP activity of MG-63 cells after the degradation of PEI in DAHP/PEI coatings. Besides that, the in vitro cellular response to the treated magnesium was investigated to gain knowledge on the differentiation and proliferation of human adipose-derived stem cells (hADSCs). Cell distribution and morphology were observed by fluorescence and SEM images, which demonstrated that DAHP/PEI coatings facilitated cell differentiation and proliferation. The high level of C-terminals of collagen type I production of hADSCs on DAHP/PEI coatings indicated the potential of the coating for promoting osteogenic differentiation. Positive results from long-term cytocompatibility and proliferation tests indicate that DAHP/PEI coatings can offer an excellent surface for hADSCs.

Microstructural characterization and film-forming mechanism of a phosphate chemical conversion ceramic coating prepared on the surface of 2A12 aluminum alloy

Phosphate chemical conversion (PCC) ceramic coatings on the surface of 2A12 aluminum alloy substrate have been fabricated by a simple and inexpensive chemical conversion process in CrO₃–NaF–H₃PO₄ solution. Microstructure characterization showed that the average diameter of micro-pores and the thickness of the PCC ceramic coating were about 50 nm and 4 μm, respectively, and the ceramic coating was compact and uniform when the conversion time was 60 min. Meanwhile, we found that the PCC ceramic coating mainly consisted of AlPO₄, AlOOH, AlF₃, and a few amorphous phases (CrPO₄ and CrOOH) via EDS, XRD, XPS analyses. TG-DSC results indicated that the PCC ceramic coatings had excellent thermal stability. Significantly, the adhesion strength (178.55 N) between the PCC ceramic coatings and 2A12 Al substrate was remarkably improved owing to the strong chemical bond between the PCC ceramic coating and 2A12 Al substrate and the increase of surface roughness. Furthermore, a lower corrosion current density (1.382 × 10⁻⁷ A cm⁻²) and a higher corrosion inhibition efficiency (99.91%) confirmed that PCC ceramic coatings had fantastic corrosion resistance because of the presence of crystalline AlPO₄/AlF₃/AlOOH and amorphous CrPO₄/CrOOH as a barrier layer. Additionally, a possible film-forming mechanism of the PCC ceramic coating was proposed during the chemical conversion process, which could be divided into four stages: dissolution of 2A12 aluminum substrate and hydrogen evolution; crystallization of insoluble phosphates and formation of an amorphous phase; growth of insoluble phosphates and dissolution of PCC ceramic coatings; growth and dissolution of PCC coatings to dynamic equilibrium.

Phosphate chemical conversion (PCC) ceramic coatings on the surface of 2A12 aluminum alloy substrate have been fabricated by a simple and inexpensive chemical conversion process in CrO₃–NaF–H₃PO₄ solution.

B, Justin Thomas KR. Experimental and computational studies of a graphene oxide barrier layer covalently functionalized with amino acids on Mg AZ13 alloy in salt medium

Leucine functionalized graphene oxide chemisorbed on a 111 surface AZ13 magnesium alloy via edge functional groups.

Magnesium-based bioceramics in orthopedic applications

Magnesium ions are directly involved in numerous biological mechanisms; for example, they play an important part in the regulation of ion channels, DNA stabilization, enzyme activation and stimulation of cell growth and proliferation. This alkaline earth metal has gained great popularity in orthopedic applications in recent years. Magnesium-based bioceramics include a large group of magnesium containing compounds such as oxides, phosphates and silicates, that are involved in orthopedic applications like bone cements, bone scaffolds or implant coatings. This article aims to give a comprehensive review on different magnesium-based bioceramics, e.g. magnesium phosphates (MgO-P₂O₅), calcium magnesium phosphates (CaO-MgO-P₂O₅), and magnesium glasses (SiO₂-MgO) with a strong focus on the chemistry and properties of magnesium phosphate containing cements as the main application form. In addition, the processing of magnesium phosphate minerals into macroporous scaffolds for tissue engineering applications by either using traditional porogens or by additive manufacturing approaches are reflected. Finally, the biological in vitro and in vivo properties of magnesium phosphates for bone regeneration are summarized, which show promising results regarding the application as bone replacement material, but still lack in terms of testing in large animal models, load-bearing application sites and clinical data.

STATEMENT OF SIGNIFICANCE

Though bone substitutes from calcium phosphates have been investigated for a long time, a new trend is visible in the biomaterials sector: magnesium based bioceramics from magnesium phosphates and silicates due to the special biological significance of magnesium ions in enzymatic activation, cell growth and proliferation, etc. In contrast to pure magnesium implants, such formulations do not release hydrogen during degradation. As with calcium based bioceramics, magnesium based bioceramics are used for the development of diverse applications such as cements, macroporous scaffolds and coatings. From this perspective, we present a systematic overview on diverse kinds of magnesium based bioceramics, their processing regimes for different clinical purposes and their behavior both in vitro and in vivo.

Differential magnesium implant corrosion coat formation and contribution to bone bonding

Magnesium alloys are presently under investigation as promising biodegradable implant materials with osteoconductive properties. To study the molecular mechanisms involved, the potential contribution of soluble magnesium corrosion products to the stimulation of osteoblastic cell differentiation was examined. However, no evidence for the stimulation of osteoblast differentiation could be obtained when cultured mesenchymal precursor cells were differentiated in the presence of metallic magnesium or in cell culture medium containing elevated magnesium ion levels. Similarly, in soft tissue no bone induction by metallic magnesium or by the corrosion product magnesium hydroxide could be observed in a mouse model. Motivated by the comparatively rapid accumulation solid corrosion products physicochemical processes were examined as an alternative mechanism to explain the stimulation of bone growth by magnesium-based implants. During exposure to physiological solutions a structured corrosion coat formed on magnesium whereby the elements calcium and phosphate were enriched in the outermost layer which could play a role in the established biocompatible behavior of magnesium implants. When magnesium pins were inserted into avital bones, corrosion lead to increases in the pull out force, suggesting that the expanding corrosion layer was interlocking with the surrounding bone. Since mechanical stress is a well-established inducer of bone growth, volume increases caused by the rapid accumulation of corrosion products and the resulting force development could be a key mechanism and provide an explanation for the observed stimulatory effects of magnesium-based implants in hard tissue. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 697-709, 2017.

Unusual anti-bacterial behavior and corrosion resistance of magnesium alloy coated with diamond-like carbon

A corrosion protective DLC film is deposited on magnesium alloy AZ31, and exhibits strong anti-bacterial ability caused by the combined effects of the bacteria adhesion favorable surface and the local release of killing elements from the substrate.

Microstructure and corrosion behaviour of laser surface melting treated WE43 magnesium alloy

An attempt has been made to improve the corrosion behavior of WE43 magnesium alloy by laser surface melting (LSM) using a 10 kW continuous-wave CO₂ laser.

Controlling the corrosion rate and behavior of biodegradable magnesium by a surface-immobilized ultrathin 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) film

An ultra-thin organometallic-like layer was formed on pure magnesium to control the rate and manner of corrosion.

Microstructure and corrosion behavior of hafnium coatings on AZ91D magnesium alloys by magnetron sputtering

Hf coatings are fabricated on the AZ91D Mg alloys by magnetron sputtering with bias voltage ranges from 0 to −125 V.

Formation initiation and structural changes of phosphate conversion coating on titanium induced by galvanic coupling and Fe2+ ions

A scholzite coating was precipitated on Ti by a galvanically coupled approach and addition of iron ions in the bath.

Corrosion behaviour of plasma electrolytic oxidation coated AZ91 Mg alloy: influence of laser surface melting pretreatment

Plasma electrolytic oxidation (PEO) was performed on a laser surface melting (LSM) modified AZ91 Mg alloy.