Resembling Graphene/Polymer Aerogel Morphology for Advancing the CO2/N2 Selectivity of the Postcombustion CO2 Capture Process

The separation of CO2 from N2 remains a highly challenging task in postcombustion CO2 capture processes, primarily due to the relatively low CO2 content (3-15%) compared to that of N2 (70%). This challenge is particularly prominent for carbon-based adsorbents that exhibit relatively low selectivity. In this study, we present a successfully implemented strategy to enhance the selectivity of composite aerogels made of reduced graphene oxide (rGO) and functionalized polymer particles. Considering that the CO2/N2 selectivity of the aerogels is affected on the one hand by the surface chemistry (offering more sites for CO2 capture) and fine-tuned microporosity (offering molecular sieve effect), both of these parameters were affected in situ during the synthesis process. The resulting aerogels exhibit improved CO2 adsorption capacity and a significant reduction in N2 adsorption at a temperature of 25 °C and 1 atm, leading to a more than 10-fold increase in selectivity compared to the reference material. This achievement represents the highest selectivity reported thus far for carbon-based adsorbents. Detailed characterization of the aerogel surfaces has revealed an increase in the quantity of surface oxygen functional groups, as well as an augmentation in the fractions of micropores (<2 nm) and small mesopores (<5 nm) as a result of the modified synthesis methodology. Additionally, it was found that the surface morphology of the aerogels has undergone important changes. The reference materials feature a surface rich in curved wrinkles with an approximate diameter of 100 nm, resulting in a selectivity range of 50-100. In contrast, the novel aerogels exhibit a higher degree of oxidation, rendering them stiffer and less elastic, resembling crumpled paper morphology. This transformation, along with the improved functionalization and augmented microporosity in the altered aerogels, has rendered the aerogels almost completely N2-phobic, with selectivity values ranging from 470 to 621. This finding provides experimental evidence for the theoretically predicted relationship between the elasticity of graphene-based adsorbents and their CO2/N2 selectivity performance. It introduces a new perspective on the issue of N2-phobicity. The outstanding performance achieved, including a CO2 adsorption capacity of nearly 2 mmol/g and the highest selectivity of 620, positions these composites as highly promising materials in the field of carbon capture and sequestration (CCS) postcombustion technology.

Pyrolysis-free synthesis of a high-loading single-atom Cu catalyst for efficient electrocatalytic CO2-to-CH4 conversion

Electrocatalytic CO2-to-CH4 conversion provides a promising means of addressing current carbon resource recycling and intermittent energy storage. Cu-based single-atom catalysts have attracted extensive attention owing to their high intrinsic activity toward CH4 production; however, they suffer from uncontrollable metal loading and aggregation during the conventional pyrolysis process of carbon-based substrates. Herein, we developed a pyrolysis-free method to prepare a single-atom Cu catalyst anchored on a formamide polymer substrate with a high loading amount and well atomic dispersion through a mild polycondensation reaction. Owing to the isolation of copper active sites, efficient CO2-to-CH4 conversion is achieved over the single-atom Cu catalyst, along with the significant suppression of C-C coupling. As a result, the optimal single-atom catalyst with 5.87 wt% of Cu offers high CH4 faradaic efficiencies (FEs) of over 70% in a wide current density range from 100 to 600 mA cm-2 in the flow cell, together with a maximum CH4 partial current density of 415.8 mA cm-2. Moreover, the CH4 FE can reach 74.2% under optimized conditions in a membrane electrode assembly electrolyzer. This work provides new insights into the subtle design of highly efficient electrocatalyst for CO2 reduction.

Selective Gas Sensing under a Mixed Gas Flow with a One-Dimensional Copper Coordination Polymer

Structural changes of the coordination polymer associated with gas adsorption (gate opening-type adsorption) can be linked to bulk physical properties such as magnetism, electrical conductivity, and dielectric properties. To enable real-space sensing applications, it is imperative to have a system where the selective adsorption of mixed gases can be correlated with physical properties. In this report, we demonstrate that a crystalline sample of one-dimensional (1D) coordination polymer exhibits selective CO2 adsorption while simultaneously displaying dielectric switching behavior in a mixed N2/CO2 gas environment. In the crystal of {[Cu2(2-TPA)4(pz)]·CH3CN}n (1·CH3CN), where 2-TPA and pz are 2-thiophencarboxylate and pyrazine, respectively, paddle wheel-type units of [Cu2(2-TPA)4] are bridged by pz, forming a 1D chain structure. One of the two crystallographically independent 2-TPA units was interacted with the pz moiety of the adjacent 1D chain by π···π interactions, forming a two-dimensional (2D) layer parallel to the ab plane. Activated 1 shows selective CO2 adsorption by a gate opening-type adsorption mechanism, indicating that the CO2 adsorption process is accompanied by a structural change. The change in the real part of dielectric permittivity (ε') under the mixed N2/CO2 gas flow is a result of the selective CO2 adsorption, which was supported by the enthalpy changes (ΔH) associated with CO2 adsorption in two methods: CO2 adsorption isotherms and temperature-dependent measurements of ε' under a mixed N2/CO2 gas flow. The calculated ΔH values were found to be in good agreement across both methods. The CO2 ratio in the mixed N2/CO2 gas flow increased, and the switching ratio of ε' (Δε') also increased. Notably, Δε' exhibited a marked increase beyond the pressure required for gate opening adsorption.

DFT Calculation of Carbon-Doped TiO2 Nanocomposites

Titanium dioxide (TiO2) has been proven to be an excellent material for mitigating the continuous impact of elevated carbon dioxide concentrations. Carbon doping has emerged as a promising strategy to enhance the CO2 reduction performance of TiO2. In this study, we investigated the effects of carbon doping on TiO2 using density functional theory (DFT) calculations. Two carbon doping concentrations were considered (4% and 6%), denoted as TiO2-2C and TiO2-3C, respectively. The results showed that after carbon doping, the band gaps of TiO2-2C and TiO2-3C were reduced to 1.58 eV and 1.47 eV, respectively, which is lower than the band gap of pure TiO2 (2.13 eV). This indicates an effective improvement in the electronic structure of TiO2. Barrier energy calculations revealed that compared to pure TiO2 (0.65 eV), TiO2-2C (0.54 eV) and TiO2-3C (0.59 eV) exhibited lower energy barriers, facilitating the transition to *COOH intermediates. These findings provide valuable insights into the electronic structure changes induced by carbon doping in TiO2, which can contribute to the development of sustainable energy and environmental conservation measures to address global climate challenges.

Multi-Dimensional Molecular Self-Assembly Strategy for the Construction of Two-Dimensional Mesoporous Polydiaminopyridine and Carbon Materials

Two-dimensional (2D) mesoporous polymers, combining the advantages of organic polymers, porous materials, and 2D materials, have received great attention in adsorption, catalysis, and energy storage. However, the synthesis of 2D mesoporous polymers is not only challenged by the complex 2D structure construction, but also by the low yield and difficulty in controlling the dynamics of the assembly during the generation of mesopores. Herein, a facile multi-dimensional molecular self-assembly strategy is reported for the preparation of 2D mesoporous polydiaminopyridines (MPDAPs), which features tunable pore sizes (17-35 nm) and abundant N content up to 18.0 at%. Benefitting from the abundant N sites, 2D nanostructure, and uniform-large mesopores, the 2D MPDAPs exhibit excellent catalytic performance for the Knoevenagel condensation reaction. After calcination under N₂ atmosphere, the obtained 2D N-doped mesoporous carbon (NMCs) with large and uniform pore sizes, high surface areas, abundant N content (up to 23.1%), and a high ratio of basic N species (57.0% pyridinic N and 35.9% pyrrolic N) can show an excellent CO₂ uptake density (11.7 µmol m^-2 at 273 K), higher than previously reported porous materials.

Decoding Carbon-Based Materials' Properties for High CO2 Capture and Selectivity

Carbon-based materials are well established as low-cost, easily synthesizable, and low regeneration energy adsorbents against harmful greenhouse gases such as CO₂. However, the development of such materials with exceptional CO₂ uptake capacity needs well-described research, wherein various factors influencing CO₂ adsorption need to be investigated. Therefore, five cost-effective carbon-based materials that have similar textural properties, functional groups, and porous characteristics were selected. Among these materials, biordered ultramicroporous graphitic carbon had shown an excellent CO₂ capture capacity of 7.81 mmol/g at 273 K /1 bar with an excellent CO₂ vs N₂ selectivity of 15 owing to its ultramicroporous nature and unique biordered graphitic morphology. On the other hand, reduced graphene revealed a remarkable CO₂ vs N₂ selectivity of 57 with a CO₂ uptake of 2.36 mmol/g at 273 K/1 bar. In order to understand the high CO₂ capture capacity, important properties derived from adsorption/desorption, Raman spectroscopy, and X-ray photoelectron spectroscopy were correlated with CO₂ adsorption. This study revealed that an increase in ultramicropore volume and sp² carbon (graphitic) content of nanomaterials could enhance CO₂ capture significantly. FTIR studies revealed the importance of oxygen functionalities in improving CO₂ vs N₂ selectivity in reduced graphene due to higher quadruple-dipole interactions between CO₂ and oxygen functionalization of the material. Apart from high CO₂ adsorption capacity, biordered ultramicroporous graphitic carbon also offered low regeneration energy and excellent pressure swing regeneration ability for five consecutive cycles.

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.

A tetraphenylethylene-based covalent organic framework for waste gas adsorption and highly selective detection of Fe3+

A tetraphenylethylene-based covalent organic framework shows an outstanding performance for waste gas adsorption and has good selectivity and detection effect for Fe3+.

Organic-inorganic hybrids for CO2 sensing, separation and conversion

Motivated by the air pollution that skyrocketed in numerous regions around the world, great effort was placed on discovering new classes of materials that separate, sense or convert CO₂ in order to minimise impact on human health. However, separation, sensing and conversion are not only closely intertwined due to the ultimate goal of improving human well-being, but also because of similarities in material prerequisites -e.g. affinity to CO₂. Partly inspired by the unrivalled performance of complex natural materials, manifold inorganic-organic hybrids were developed. One of the most important characteristics of hybrids is their design flexibility, which results from the combination of individual constituents with specific functionality. In this review, we discuss commonly used organic, inorganic, and inherently hybrid building blocks for applications in separation, sensing and catalytic conversion and highlight benefits like durability, activity, low-cost and large scale fabrication. Moreover, we address obstacles and potential future developments of hybrid materials. This review should inspire young researchers in chemistry, physics and engineering to identify and overcome interdisciplinary research challenges by performing academic research but also - based on the ever-stricter emission regulations like carbon taxes - through exchanges between industry and science.

Multifunctional Carbon Aerogels with Hierarchical Anisotropic Structure Derived from Lignin and Cellulose Nanofibers for CO2 Capture and Energy Storage

In current times, CO₂ capture and lightweight energy storage are receiving significant attention and will be vital functions in next-generation materials. Porous carbonaceous materials have great potential in these areas, whereas most of the developed carbon materials still have significant limitations, such as nonrenewable resources, complex and costly processing, or the absence of tailorable structure. In this study, a new strategy is developed for using the currently underutilized lignin and cellulose nanofibers, which can be extracted from renewable resources to produce high-performance multifunctional carbon aerogels with a tailorable, anisotropic pore structure. Both the macro- and microstructure of the carbon aerogels can be simultaneously controlled by carefully tuning the weight ratio of lignin to cellulose nanofibers in the precursors, which considerably influences their final porosity and surface area. The designed carbon aerogels demonstrate excellent performance in both CO₂ capture and capacitive energy storage, and the best results exhibit a CO₂ adsorption capacity of 5.23 mmol g^-1 at 273 K and 100 kPa and a specific electrical double-layer capacitance of 124 F g^-1 at a current density of 0.2 A g^-1, indicating that they have great future potential in the relevant applications.

Cost-effective preparation of microporous polymers from formamide derivatives and adsorption of CO2 under dry and humid conditions

Nitrogen-rich microporous polymers are prepared via a catalyst-free polymerization reaction using formamide derivatives as monomers, which exhibit outstandingly high CO₂/N₂ selectivity up to 151 and 173 at 273 K under dry and humid conditions, respectively.

Crucial Factors for the Application of Functional Nanoporous Carbon-Based Materials in Energy and Environmental Applications

This special issue of C—Journal of Carbon Research is dedicated to “Functional Nanoporous Carbon-Based Materials”. It contains contributions reporting on the synthesis of nanoporous carbons for the adsorption of proteins, their applications in electrochemical energy storage/conversion, and on the characterization/modification of their surface chemistry. Nanoporous carbon-based materials are widely researched, but at the same time, the field is still full of unutilized potential. The atomic construction of the carbon framework, pore sizes, pore geometries, presence of heteroatoms, particle size and shape, and many other “internal screws” are available; in the end, the high potential of carbon-based materials will only be fully explored if the interplay of these crucial factors is precisely controlled. This article is a summary of what we consider important for future targeted improvement of porous carbon nanomaterials for energy and environmental applications.

Nitrogen and sulfur Co-doped microporous activated carbon macro-spheres for CO2 capture

Millimeter-sized nitrogen and sulfur co-doped microporous activated carbon spheres (NSCSs) were first synthesized from poly(styrene-vinylimidazole-divinylbenzene) resin spheres through concentrated H₂SO₄ sulfonation, carbonization and KOH activation. Styrene (ST) and N-vinylimidazole (VIM) were carbon and nitrogen sources, while the sulfonic acid functional groups introduced by the simple concentrated sulfuric acid sulfonation worked simultaneously as cross-linking agent and sulfur source during the following thermal treatments. It was found that the surface chemistries, textural structures, and CO₂ adsorption performances of the NSCSs were significantly affected by the addition of VIM. The NSCS-4-700 sample with a molar ratio of ST: VIM = 1: 0.75 showed the best CO₂ uptake at different temperatures and pressures. An exhaustive adsorption evaluation indicated that CO₂ sorption at low pressures originated from the synergistic effect of surface chemistry and micropores below 8.04 Å, while at the moderate pressure of 8.0 bar, CO₂ uptake was dominated by the volume of micropores. The thermodynamics suggested the exothermic and orderly nature of the adsorption process, which was dominated by a physisorption mechanism. The high CO₂ adsorption capacity, fast kinetic adsorption rate, and great regeneration stability of the nitrogen and sulfur co-doped activated carbon spheres indicated that the as-prepared carbon adsorbents were good candidates for large-scale CO₂ capture.

Optimization of the Pore Structure of Biomass-Based Carbons in Relation to Their Use for CO2 Capture under Low- and High-Pressure Regimes

A versatile chemical activation approach for the fabrication of sustainable porous carbons with a pore network tunable from micro- to hierarchical micro-/mesoporous is hereby presented. It is based on the use of a less corrosive and less toxic chemical, i.e., potassium oxalate, rather than the widely used KOH. The fabrication procedure is exemplified for glucose as precursor, although it can be extended to other biomass derivatives (saccharides) with similar results. When potassium oxalate alone is used as activating agent, highly microporous carbons are obtained (S_BET ≈ 1300-1700 m² g^-1). When a melamine-mediated activation process is used, hierarchical micro-/mesoporous carbons with surface areas as large as 3500 m² g^-1 are obtained. The microporous carbons are excellent adsorbents for CO₂ capture at low pressure and room temperature, able to adsorb 4.2-4.5 mmol CO₂ g^-1 at 1 bar and 1.1-1.4 mmol CO₂ g^-1 at 0.15 bar. However, the micro-/mesoporous carbons provide record-high room temperature CO₂ uptakes at 30 bar of 32-33 mmol g^-1 CO₂ and 44-49 mmol g^-1 CO₂ at 50 bar. The findings demonstrate the key relevance of pore size in CO₂ capture, with narrow micropores having the leading role at pressures <1 bar and supermicropores/small mesopores at high pressures. In this regard, the fabrication strategy presented here allows fine-tuning of the pore network to maximize both the overall CO₂ uptake and the working capacity at any target pressure.

Effective Acetylene/Ethylene Separation at Ambient Conditions by a Pigment-Based Covalent-Triazine Framework

A novel covalent-triazine framework (CTF-PO71) is designed and prepared from an organic pigment molecule for high-performance gas separation. The functional sites with different electrostatic potentials on the pore surface of CTF-PO71 demonstrate a strong interaction between C₂ H₂ and CTF-PO71 to achieve preferential adsorption of C₂ H₂ over C₂ H₄ , thus enabling effective capture of a trace amount of C₂ H₂ from the gas mixture. This is the first organic porous polymer that is capable of separating C₂ H₂ and C₂ H₄ . The commercial availability and the low cost of the pigment as well as the high stability of the resultant framework endow CTF-PO71 with a significant potential for practical applications.

Carbon Dioxide Capture Adsorbents: Chemistry and Methods

Excess carbon dioxide (CO₂ ) emissions and their inevitable consequences continue to stimulate hard debate and awareness in both academic and public spaces, despite the widespread lack of understanding on what really is needed to capture and store the unwanted CO₂ . Of the entire carbon capture and storage (CCS) operation, capture is the most costly process, consisting of nearly 70 % of the price tag. In this tutorial review, CO₂ capture science and technology based on adsorbents are described and evaluated in the context of chemistry and methods, after briefly introducing the current status of CO₂ emissions. An effective sorbent design is suggested, whereby six checkpoints are expected to be met: cost, capacity, selectivity, stability, recyclability, and fast kinetics.

Unveiling anomalous CO2-to-N2 selectivity of graphene oxide

Graphene oxide (GO) exhibits anomalous increase in CO₂-to-N₂ selectivity with temperature rise utilizing CO₂-philic functional groups and large macropores.

Functionalized metal organic frameworks for effective capture of radioactive organic iodides

Highly efficient capture of radioactive organic iodides (ROIs) from off-gas mixtures remains a substantial challenge for nuclear waste treatment. Current materials utilized for ROI sequestration suffer from low capacity, high cost (e.g. use of noble metals), and poor recyclability. Recently, we have developed a new strategy to tackle this challenge by functionalizing MOF materials with tertiary amines to create molecular traps for the effective capture and removal of ROIs (e.g. radioactive methyl iodide) from nuclear wastes. To further enhance the uptake capacity and performance of CH₃I capture by ROI molecular traps, herein, we carry out a systematic study to investigate the effect of different amine molecules on ROI capture. The results demonstrate a record-high CH₃I saturation uptake capacity of 80% for MIL-101–Cr–DMEDA at 150 °C, which is 5.3 times that of Ag⁰@MOR (15 wt%), a leading adsorbent material for capturing ROIs during nuclear fuel reprocessing. Furthermore, the CH₃I decontamination factors (DFs) for MIL-101–Cr–DMEDA are as high as 5000 under simulated reprocessing conditions, largely exceeding that of facility regulatory requirements (DF = 3000). In addition, MIL-101–Cr–DMEDA can be recycled without loss of capacity, illustrating yet another advantage compared to known industrial adsorbents, which are typically of a “single-use” nature. Our analysis also shows that both physisorption and chemisorption of CH₃I occur at the three amine-grafted MOFs. While chemisorption takes place at the amine functionalized sites, the amount of physisorption correlates with the MOF porosity. A possible binding site of amine–CH₃I interaction has been identified via an in situ IR spectroscopic study. The results suggest that CH₃I interacts strongly and directly with the tertiary nitrogen of the amine molecules. The CH₃I uptake amount decreases as the amine chain length increases, in trend with the decreasing pore space of the corresponding framework. The strategy to build MOF-based molecular traps developed in this work not only leads to a new record-high performance for ROI capture, but also offers an effective way of systematically tuning the porosity by varying the length of functionalized amine molecules. This study also demonstrates that MOFs represent a promising new platform for selective capture and removal of radioactive nuclear waste.

Beyond pristine MOFs: carbon dioxide capture by metal–organic frameworks (MOFs)-derived porous carbon materials

Porous carbon materials were synthesized by pyrolysis of zinc-based MOFs. These materials exhibited superior CO₂ capacities and better CO₂ separation ability under humid conditions compared to those of the pristine MOFs.

Conceptual design of tetraazaporphyrin- and subtetraazaporphyrin-based functional nanocarbon materials: electronic structures, topologies, optical properties, and methane storage capacities

A large variety of conceptual three- and fourfold tetraazaporphyrin- and subtetraazaporphyrin-based functional 3D nanocage and nanobarrel structures have been proposed on the basis of in silico design. The designed structures differ in their sizes, topology, porosity, and conjugation properties. The stability of nanocages of Oh symmetry and nanobarrels of D4h symmetry was revealed on the basis of DFT and MD calculations, whereas their optical properties were assessed using a TDDFT approach and a long-range corrected LC-wPBE exchange-correlation functional. It was shown that the electronic structures and vertical excitation energies of the functional nanocage and nanobarrel structures could be easily tuned via their size, topology, and the presence of bridging sp(3) carbon atoms. TDDFT calculations suggest significantly lower excitation energies in fully conjugated nanocages and nanobarrels compared with systems with bridging sp(3) carbon fragments. Based on DFT and TDDFT calculations, the optical properties of the new materials can rival those of known quantum dots and are superior to those of monomeric phthalocyanines and their analogues. The methane gas adsorption properties of the new nanostructures and nanotubes generated by conversion from nanobarrels were studied using an MD simulation approach. The ability to store large quantities of methane (106-216 cm(3) (STP) cm(-3)) was observed in all cases with several compounds being close to or exceeding the DOE target of 180 cm(3) (STP) cm(-3) for material-based methane storage at a pressure of 3.5 MPa and room temperature.

A metal–organic framework MIL-101 doped with metal nanoparticles (Ni & Cu) and its effect on CO2adsorption properties

In this work, Cu- and Ni-doped MIL-101 were synthesizedviaa microwave irradiation technique and used as adsorbents for CO₂adsorption. The loading of MNPs in MIL-101 showed a beneficial effect on the adsorption capacity and cyclability.

In situ synthesis of carbon nanotube doped metal–organic frameworks for CO2 capture

Metal organic–frameworks (MOFs) with intriguing structural motifs and unique properties are potential candidates for carbon dioxide (CO₂) storage.

Expanded graphite/phenolic resin-based carbon composite adsorbents for post-combustion CO2 capture

Incorporating a small proportion of expanded graphite dramatically improves microporosity and CO₂ uptake of phenolic resin-derived activated carbons.