Eco-friendly, pH-sensitive curcumin-loaded sodium alginate/hydroxyapatite/quaternary ammonium chitosan microspheres with enhanced antibacterial and antioxidant activities for fruit preservation

The development of intelligent responsive reactive packaging materials with natural polymers shows excellent potential in food preservation. In this study, eco-friendly, pH-sensitive sodium alginate (SA)/hydroxyapatite (HA)/quaternary ammonium chitosan (HACC) composite microspheres loading curcumin (CUR) with excellent antibacterial and antioxidant activities were successfully synthesized. Scanning electron microscopy (SEM) and nitrogen adsorption/desorption tests indicated that the doping of HA substantially increased the specific surface area and pore volume of the microspheres. The loading experiments showed that the efficiency of the microspheres was significantly increased by 49.47 % and 55.10 %, respectively, when HA and HACC were incorporated into the SA network. The release test results suggested that the release rate of SA/HA/HACC microspheres loading CUR (SA/HA/HACC@CUR) increased as the pH decreased, demonstrating notable pH-responsive release characteristics. DPPH free radical scavenging experiments demonstrated that the SA/HA/HACC@CUR had excellent and long-lasting antioxidant capacity. The antibacterial experiments revealed that the SA/HA/HACC@CUR had excellent antibacterial properties, with inhibition rates of 88.73 % and 92.52 % against E. coli and S. aureus, respectively. Making coatings out of microspheres could effectively slow down the rotting and deterioration of cherry tomatoes during storage, suggesting that microspheres with intelligent responses have a broad application prospect in fruit preservation.

Facet-Controlled Growth of Hydroxyapatite for Effectively Removing Pb from Aqueous Solutions

To address the growing concerns regarding severe water pollution, effective and environmentally friendly adsorbents must be identified. In this study, we prepared hydroxyapatite (HAp, Ca10(PO4)6(OH)2) as an eco-friendly absorbent via simple precipitation and obtained rod- (r-HAp) and plate-shaped HAp (p-HAp). The approach to obtaining p-HAp involved a low pH titration rate, promoting growth along the c-axis due to the adsorption of OH- on the (110) facet. Conversely, r-HAp was obtained by maintaining a high concentration of OH- during the initial stage through rapid pH titration, leading to a stronger restrictive effect on the growth of positively charged a(b)-planes. p-HAp demonstrated superior adsorption capacity, removing Pb through dissolution and recrystallization, achieving an impressive 625 mg/g within a 60 min reaction time compared to r-HAp. Our findings afford insights into the Pb removal mechanisms of HAp with different morphologies and can aid in the development of water purification strategies against heavy metal contamination.

3D-Printed Filters for Efficient Heavy Metal Removal from Water Using PLA@CS/HAP Composites

Chitosan/Hydroxyapatite composites, enriched with relatively active -NH2 and -OH groups, have emerged as promising adsorbents for heavy metal removal. In this study, we harnessed the potential of CS/HAP composites by developing monolithic PLA@CS/HAP filters utilizing 3D printing and freeze-drying techniques. These filters possess both macroscopic and microscopic porous structures, endowing them with exceptional capabilities for removing heavy metals from water. The adsorption properties of CS/HAP composites were explored by varying the dosage, duration, and initial concentrations of copper ions. The maximum adsorption capacity for Cu2+ was determined to be approximately 119+/-1 mg/g at the natural pH and 298 K. Notably, the monolithic PLA@CS/HAP filters demonstrated remarkable efficiency in the removal of copper ions, with 90% of copper ions effectively removed within a mere 2-h period in a cyclic adsorption experiment. Furthermore, the PLA@CS/HAP filters exhibited a robust dynamic Cu2+ removal capacity (80.8% or even better in less than 35 min) in a dynamic adsorption experiment. Importantly, all materials employed in this study were environmentally friendly. In summary, the PLA@CS/HAP filter offers advantages such as ease of preparation, eco-friendliness, versatility, and broad applicability in diverse wastewater treatment scenarios, thereby presenting a significant potential for practical implementation.

Strontium-doped hydroxyapatite as adsorbent effectively to remove lead ions from water

In this study, a strontium-doped hydroxyapatite (Sr-HAP) was synthesized by the solgel method, which was used as adsorbent to remove lead ions (Pb²⁺) from water. The results showed that the adsorption capacities of the Sr-HAP were obviously higher than those of the HAP, the adsorption capacities of which for Pb²⁺ reached 651.175 mg/g. The proper increasement in the dosage of adsorbent was beneficial to the removal of Pb²⁺ by Sr-HAP. Meanwhile Sr-HAP had a wide applicable pH range for Pb²⁺. And the increasement in temperature could increase the adsorption capacity of Sr-HAP for Pb²⁺ to a certain extent. The Langmuir model was used to fit the isotherm adsorption process of Sr-HAP to Pb²⁺ in water. Compared with HAP, the specific surface area of Sr-HAP has increased by 11.1%, and the pore size distribution of Sr-HAP tended to be smaller and more uniform. Hence, Sr-HAP could be used as an ideal adsorbent to remove Pb²⁺ in wastewater.

Equilibrium Isotherms and Kinetic Effects during the Adsorption of Pb(II) on Titanosilicates Compared with Natural Zeolite Clinoptilolite

The present study focuses on the adsorption of Pb(II) by the H-form of titanosilicates (ETS-4, GTS-1) and clinoptilolite. The H-forms were prepared by first exchanging the extra-framework cations—Na+, K+, Ca2+, etc.—with NH4+, and by subsequent thermal treatment for obtaining H-forms. The purity and thermal behaviour of the initial, NH4+, and H-forms of ETS-4, GTS-1, and clinoptilolite were analysed by powder XRD, while the morphology and size of the particles were determined by SEM. The chemical composition of the solids and the solutions was obtained by WDXRF and ICP-OES, respectively. The kinetics research of the Pb(II) adsorption processes was based on WDXRF and ICP-OES. The H-forms of the materials displayed favourable properties for the adsorption of Pb(II). The best behaviour in this respect was demonstrated by GTS-1 when compared to ETS-4 and clinoptilolite.

Sustainable processes for treatment and management of seafood solid waste

Seafood processing is an important economical activity worldwide and is an integral part of the food chain system. However, their processing results in solid waste generation whose disposal and management is a serious concern. Proteins, amino acids, lipids with high amounts of polyunsaturated fatty acids (PUFA), carotenoids, and minerals are abundant in the discards, effluents, and by-catch of seafood processing waste. As a result, it causes nutritional loss and poses major environmental risks. To solve the issues, it is critical that the waste be exposed to secondary processing and valorization for recovery of value added products. Although chemical waste treatment technologies are available, the majority of these procedures have inherent flaws. Biological solutions, on the other hand, are safe, efficacious, and ecologically friendly while maintaining the intrinsic bioactivities after waste conversion. Microbial fermentation or the actions of exogenously introduced enzymes on waste components are used in most bioconversion processes. Algal biotechnology has recently developed unique technologies for biotransformation of nutrients, which may be employed as a feedstock for the recovery of important chemicals as well as biofuel. Bioconversion methods combined with a bio-refinery strategy offer the potential to enable environmentally-friendly and cost-effective seafood waste management. The refinement of these wastes through sustainable bioprocessing interventions can give rise to various circular bioeconomies within the seafood processing sector. Moreover, a techno-economic perspective on the developed solid waste processing lines and its subsequent environmental impact could facilitate commercialization. This review aims to provide a comprehensive view and critical analysis of the recent updates in seafood waste processing in terms of bioconversion processes and byproduct development. Various case studies on circular bioeconomy formulated on seafood processing waste along with techno-economic feasibility for the possible development of sustainable seafood biorefineries have also been discussed.

Electrophoretic deposition of hydroxyapatite/chitosan nanocomposites: the effect of dispersing agents on the coating properties

In this study, electrophoretic deposition (EPD) was used for the coating on titanium (Ti) substrate with a composite of hydroxyapatite (HA)-chitosan (CS) in the presence of dispersing agents such as polyvinyl butyral (PVB), polyethylene glycol (PEG), and triethanolamine (TEA). The materials were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), zeta potential, and Fourier transform infrared (FT-IR) spectroscopy. The addition of PVB, PEG, and TEA agents improved the development of Ti coating during the EPD process. These additives increased the suspension stability and promoted the formation of uniform and compact HA/CS nanocomposite coatings on Ti substrates. The electrochemical polarization tests (e.g., potentiodynamic test) of the substrate with and without coating were investigated. Data analysis showed high corrosion resistance of Ti substrate coated with the HA/CS NP composite. The corrosion potentials displayed a shift toward positive values indicating the increase in the corrosion resistance of Ti after coating. In addition to measuring calcium ion release at various pH values and contact times at a biological pH value of 5.5, the stabilities of Ti substrates coated with HA/CS and different dispersing agents were also evaluated. Ti substrates with high anticorrosion properties may have a new potential application in biomedicine.

Electrophoretic deposition was used for coating of titanium substrate with a composite of hydroxyapatite (HA)-chitosan (CS) in the presence of polyvinyl butyral (PVB), polyethylene glycol (PEG), and triethanolamine (TEA).

Electrospun polyacrylonitrile/hydroxyapatite composite nanofibrous membranes for the removal of lead ions from aqueous solutions

A novel Polyacrylonitrile/Hydroxyapatite (PAN/HAP) composite nanofibrous membranes were successfully prepared via the electrospinning approach. The scanning electron microscope, Fourier transforms infrared, X-ray diffraction were selected to serve as characterization techniques...

Formation of Water-Channel by Propylene Glycol into Polymer for Porous Materials

In this study, a porous membrane with a cellulose acetate (CA) matrix was fabricated using propylene glycol with a water pressure treatment without a metal salt as an additive. The water pressure treatment of the fabricated CA membrane with propylene glycol yielded nanopores. The nanopores were formed as the additives in the CA chains led to plasticization. The weakened chains of the parts where the plasticization occurred were broken by the water pressure, which generated the pores. Compared to the previous study with glycerin as an additive, the size of the hydration region was controlled by the number of hydrophilic functional groups. When water pressure was applied to the CA membrane containing propylene glycol as an additive, the hydration area was small, so it was effective to control the pore size and the number of nano pores than glycerin. In addition, the number of nanopores and pore size could be easily adjusted by the water pressure. The porosity of the membrane was increased owing to the trace amount of propylene glycol, confirmed by scanning electron microscopy (SEM) and porosimetry. The interaction between the CA and propylene glycol was verified by Fourier-transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). Consequently, it was the optimum composition to generate pores at the CA/propylene glycol 1:0.2 ratio, and porosity of 69.7% and average pore diameter of 300 nm was confirmed. Since it is a membrane with high porosity and nano sized pores, it is expected to be applied in various fields.

Hybrid material based on subgleba of mosaic puffball mushroom (Handkea utriformis) as an adsorbent for heavy metal removal from aqueous solutions

The alkali treated subglebal tissue of the mosaic puffball (Handkea utriformis) (Sa) and Sa modified with hydroxyapatite (Sa-HAp), obtained by successive ionic layer adsorption and reaction (SILAR) method, were used for the removal of Pb²⁺, Cd²⁺ and Ni²⁺ from aqueous solution. The materials were characterized by FT-IR, Raman, SEM and EDS analysis and by determination of pH_PZC. The adsorption performances of Sa and Sa-HAp were assessed in batch experiments at different pH, contact times, temperatures and mass of the adsorbent. Different models of adsorption isotherms were used, and the best fit was obtained with the Langmuir model. Maximum adsorption capacities of Sa towards Pb²⁺, Cd²⁺ and Ni²⁺ were 44.82, 15.54 and 17.21 mg g^-1, while for Sa-HAp were 79.55, 52.59 and 45.01 mg g^-1, respectively. Kinetic data were well fitted by a pseudo second-order model, while thermodynamic studies disclose spontaneous and endothermic adsorption process. The Sa-Hap was successfully regenerated with 1 M NaCl and after the fifth desorption cycle and 10 h achieved 82.9, 69.7 and 60.4 %, while for 0.5 M NaCl + 0.5 M NaOH and 1 h was 78.3, 64.1, 57.5 % of desorbed Pb²⁺, Cd²⁺ and Ni²⁺, respectively. The competitive study and results from a column system confirmed good applicability of Sa-HAp adsorbent.

Fabrication of a CO2-responsive chitosan aerogel as an effective adsorbent for the adsorption and desorption of heavy metal ions

In the traditional desorption method, strong acid is commonly used as an eluent for the regeneration of adsorbents. It is of critical economic and environmental significance to develop a chemical-free desorption method. In this study, a new CO₂-responsive chitosan aerogel adsorbent was synthesized from CO₂-responsive poly(acrylic acid-2-(dimethylamino)ethyl methacrylate) and chitosan by physicochemical double crosslinking for the adsorption of Cu²⁺. Compared with the chitosan aerogel, the adsorption capacity of Cu²⁺ and mechanical properties of CO₂-responsive chitosan aerogel increased by 162% and 660%, respectively. Most importantly, after the adsorption of Cu²⁺ by CO₂-responsive chitosan aerogel, the Cu²⁺ could be desorbed by CO₂ bubbling, and the desorption rate of metal ions was more than 80%. The adsorption of Cu²⁺ by aerogel was attributed to chelation and complexation. The desorption of porous chitosan/P(AA-co-DMAEMA) aerogels (CPA) by CO₂ mainly occurred through charge repulsion of protonated ‒NH₂ and ‒N‒ groups. After 6 cycles, the adsorption capacity of CPA for metal ions still reached 70% of the initial adsorption capacity, and the desorption rate reached 75%. This novel CO₂-responsive chitosan aerogel is a highly efficient and environmentally friendly adsorbent for the adsorption and recovery of metal ions.

Fast and Highly Efficient Adsorption Removal of Toxic Pb(II) by a Reusable Porous Semi-IPN Hydrogel Based on Alginate and Poly(Vinyl Alcohol)

A porous semi-interpenetrating network (semi-IPN) hydrogel adsorbent with excellent adsorption properties and removal efficiency towards Pb(II) was prepared by a facile grafting polymerization reaction in aqueous medium using natural biopolymer sodium alginate (SA) as the main chains, sodium acrylate (NaA) as the monomers, and poly(vinyl alcohol) (PVA) as the semi-IPN component. FTIR, TGA and SEM analyses confirm that NaA monomers were grafted onto the macromolecular chains of SA, and PVA chains were interpenetrated and entangled with the crosslinked network. The incorporation of PVA facilitates to form pores on the surface of hydrogel adsorbent. The semi-IPN hydrogel containing 2 wt% of PVA exhibits high adsorption capacity and fast adsorption rate for Pb(II). The best adsorption capacity reaches 784.97 mg/g, and the optimal removal rate reaches 98.39% (adsorbent dosage, 2 g/L). In addition, the incorporation of PVA improved the gel strength of hydrogel, and the storage modulus of hydrogel increased by 19.4% after incorporating 2 wt% of PVA. The increase of gel strength facilitates to improve the reusability of hydrogel. After 5 times of regeneration, the adsorption capacity of SA-g-PNaA decreased by 23.2%, while the adsorption capacity of semi-IPN hydrogel only decreased by 10.8%. The adsorption kinetics of the hydrogel in the initial stage (the moment when the adsorbent contacts solution) and the second stage are fitted by segmentation. It is intriguing that the adsorption kinetics fits well with both pseudo-second-order kinetic model and pseudo-first-order model before 60 s, while only fits well with pseudo-second-order adsorption model in the whole adsorption process. The chemical complexing adsorption mainly contribute to the efficient capturing of Pb(II).

Investigation of sorption mechanism of methylene blue, congo red and tannic acid from aqueous solutions onto magnetic composite sorbent obtained from alkaline pretreated spent coffee grounds

In this article, a novel magnetic composite material obtained from alkaline pretreated spent coffee grounds was used for investigating of the sorption mechanism of methylene blue, congo red and tannic acid from aqueous solutions. In order to clarify mechanisms were analyzed the adsorption kinetics models (external and internal diffusion; chemical kinetics (pseudo-first order, pseudo-second order); intraparticle diffusion) and the adsorption thermodynamics. The results showed that the sorption of all studied sorbates was controlled by a mixed diffusion model and a pseudo-second order and diffusion rate revealed three stage of the mass transfer. The adsorption process of methylene blue, congo red and tannic acid onto Fe3O4/PVA/APSCGs sorbent was spontaneous and endothermic. Based on the results, it was concluded that the mechanism for removal of the studied sorbates by adsorption onto Fe3O4/PVA/APSCGs sorbent may be assumed both physisorption and chemisorption.

Biopolymer-Based Nanohydroxyapatite Composites for the Removal of Fluoride, Lead, Cadmium, and Arsenic from Water

In this study, hydroxyapatite (HAP) nanocomposites were prepared with chitosan (HAP-CTS), carboxymethyl cellulose (HAP-CMC), alginate (HAP-ALG), and gelatin (HAP-GEL) using a simple wet chemical in situ precipitation method. The synthesized materials were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmett-Teller surface area analysis, and thermogravimetric analysis. This revealed the successful synthesis of composites with varied morphologies. The adsorption abilities of the materials toward Pb(II), Cd(II), F-, and As(V) were explored, and HAP-CTS was found to have versatile adsorption properties for all of the ions, across a wide range of concentrations and pH values, and in the presence of common ions found in groundwater. Additionally, X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy confirmed the affinity of HAP-CTS toward multi-ion mixture containing all four ions. HAP-CTS was hence engineered into a more user-friendly form, which can be used to form filters through its combination with cotton and granular activated carbon. A gravity filtration study indicates that the powder form of HAP-CTS is the best sorbent, with the highest breakthrough capacity of 3000, 3000, 2600, and 2000 mL/g for Pb(II), Cd(II), As(V), and F-, respectively. Hence, we propose that HAP-CTS could be a versatile sorbent material for use in water purification.

Advanced applications of Zr-based MOFs in the removal of water pollutants

The global water pollution is caused by the increase of industrial and agricultural activities, which have produced various toxic pollutants. Pollutants in water generally consist of metal ions, pharmaceuticals and personal care products (PPCPs), oil spills, organic dyes, and other organic pollutants. Amongst the adsorbents that have been developed to deal with pollutants in water, Zr-based metal-organic frameworks (MOFs) have drawn scientists' great attention due to their excellent stability and adjustable functionalization. Herein, the present review article introduces the synthetic methods of functionalized Zr-based MOFs and summarizes their applications in water pollution treatment. It also clarifies the interactions and removal mechanisms between pollutants and Zr-based MOFs. The use of these MOFs with eminent adsorption ability and recycling performance have been discussed in detail. Zr-based MOFs also face some challenges such as high cost, lack of real water environment applications, selective removal of pollutants, and low ability to remove composite pollutants. Future research should focus on addressing these issues. Although there is still a blank of the practical utility of Zr-based MOFs on a commercial scale, the research reported to date clearly shows that they are very promising materials for the water treatment.

Recent progress in preparation and applications of chitosan/calcium phosphate composite materials

Studying the development of unique materials from sustainable and renewable resources has gained increasing concern due to the depletion of fossil resources. Chitosan and its derivatives have been considered as versatile candidates for preparing attractive materials. The fabrication of chitosan/calcium phosphate composite compounds has received much attention for the development of numerous promising products in different fields. In this short review, recent preparation strategies for chitosan/calcium phosphate composites such as freeze casting, vacuum-assisted filtration, and biomimetic mineralization were discussed. The review presented their advances for diverse applications such as bone tissue engineering implants, drug delivery, wound healing, dental caries, as well adsorption of organic and heavy metals from polluted water. The challenges and future perspectives for the application of chitosan/calcium phosphate materials in biomedical and environmental applications were also involved in this review article.

Nacre-inspired hydroxyapatite/chitosan layered composites effectively remove lead ions in continuous-flow wastewater

Design and fabrication of novel adsorbents to remove heavy metal ions in continuous-flow wastewater remained a great challenge. Inspired by the hierarchical architecture and biomineralization process of nacre, we firstly constructed hydroxyapatite/chitosan (HA/CH) layered composites. The brick-and-mortar characteristics of HA/CH layered composites improved their flexure strengths up to 3.08 MPa so that the hierarchical architectures could not be destroyed even under high-pressure drop. HA/CH layered composites had the hierarchical microstructures analogous to plate towers, facilitating the separation of adsorbents from water. The interlaminar macropores in the layered composites contributed to the transfer of continuous-flow wastewater. The Pb(II), Cd(II) and Hg(II) ions in wastewater showed similar adsorption trends, and their adsorption amounts arrived at 295.96, 192.37 and 127.38 mg g^-1 after 6 days, respectively. Among the above heavy metal ions, the HA/CH layered composites possessed the best Pb(II) adsorption ability due to forming lead hydroxyapatite rods and CH-Pb complexes. The Pb(II) adsorption performances of HA/CH layered composites matched well with Elovich equation, pseudo-first-order and pseudo-second-order kinetics models, revealing the heterogeneous chemisorption mechanism at adsorbent/wastewater interfaces. Therefore, the nacre-like HA/CH layered composites with appropriate mechanical property and excellent adsorption capacity are a novel platform for heavy metal removal in continuous-flow wastewater.

Facile in situ synthesis of cellulose microcrystalline-manganese dioxide nanocomposite for effective removal of Pb(II) and Cd(II) from water

A novel cellulose microcrystalline-manganese dioxide nanocomposite (CMC-NMO) was synthesized by the redox reaction between potassium permanganate and ethanol based on cellulose microcrystalline. The cellulose microcrystalline (CMC) as support providing growth sites for the manganese dioxide nanowhiskers produced by the redox reaction and its application for Pb(II) and Cd(II) removal from aqueous was investigated. The characterization of as-synthesized material was revealed by various spectroscopic and microscopic techniques. Infrared-transform infrared (FITR) indicates that the incorporation of manganese oxide to CMC does not change the initial structure of it. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) data show that the manganese dioxide nanowhiskers with a few nanometers are uniformly dispersed on the surface of cellulose. Kinetics experiments reveal that Pb(II) and Cd(II) adsorption on CMC-NMO is a fast process and pseudo-second-order model fits the adsorption better. The maximum adsorption capacities of Pb(II) and Cd(II) obtained from the Langmuir model are 290.8 mg/g and 67.4 mg/g, respectively. The mechanism is mainly attributed to surface complexation and electrostatic attraction by energy dispersive analysis of X-rays (EDAX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis. In addition, depth removal experiments show that the residual concentrations of Pb(II) and Cd(II) in natural water after adsorption are lower than 0.01 mg/L. The regeneration and cyclic utilizing studies indicate that CMC-NMO has good adsorption stability. Therefore, the results indicate that this material can be employed as a potential adsorbent for current serious Pb(II) and Cd(II) pollution caused by industrial emissions. Graphical abstract.

Fish scale-extracted hydroxyapatite/chitosan composite scaffolds fabricated by freeze casting-An innovative strategy for water treatment

In this study, low-cost and eco-friendly hydroxyapatite (HA) minerals were extracted from scales of Tilapia fish (Oreochromis mossambicus). After calcination, fish-scale extracted powder was further confirmed to be HA by X-ray diffraction with mean particle size of 5.96 μm determined by particle size analyzer. The calcined powder was utilized as the raw material and combined with chitosan (CS) to synthesize composite scaffolds by freeze casting and cross-linking. Mercury porosimetry results showed that the scaffolds possessed hierarchical porous structure. Microstructural features characterized by SEM revealed unidirectional channel structures with channel sizes ranged from 10 to 100 μm and 1 to 50  μm for scaffolds freeze-casted at 2 ℃/min and 5 ℃/min cooling rates, respectively. The adsorption kinetics of HA/CS composite scaffolds with varying channel sizes were investigated by both batch and fixed-bed processes with different Pb(П) initial concentrations (100 and 1000 mg/L). The adsorption capability was optimized by tuning the cooling rates and the maximum adsorption amount could reach 75-570 mg/g in batch process and 94 mg/g in fixed bed process. In summary, the HA/CS composite scaffolds showed great capability to remove heavy metal ions from waste water and their tunable channel sizes could be applied in suitable fields under both statistic and flowing conditions.

Unexpectedly High Adsorption Capacity of Esterified Hydroxyapatite for Heavy Metal Removal

Nanohydroxyapatite (n-HAP) as an environmentally friendly adsorbent of heavy metal ions still requires the rational design of the pore structure and surface characteristic for enhancing their adsorption capacity toward heavy metal ions. A novel one-step strategy was developed to regulate the pore structure and surface characteristic of esterified HAP (n-EHAP) nanocrystals (NCs) for enhancing the adsorption capacity by incorporation of 2-bromo-2-methylpropionate (2-BrMP) groups on the surface of n-EHAP NCs. When using water as the sole solvent, the aggregation of n-EHAP NCs became unavoidable because of incorporation of hydrophobic 2-BrMP groups on n-HAP particle surfaces. The synthesis of uniform and individual n-EHAP NCs was achieved by rational adjustment of the aqueous dispersion medium to avoid agglomeration and precipitation, which was induced by the changing surface characteristic of n-EHAP NCs during the continuing incorporation of hydrophobic 2-BrMP groups in the water/acetone system. The successful incorporation of hydrophobic 2-BrMP groups on the surface of n-EHAP NCs was characterized by X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and liquid nitrogen adsorption isotherms. To explore the potential application in water treatment, a series of systematically designed batch experiments were conducted to determine the influences of the adsorbent dosage, solution pH, and contact time on the adsorption behavior of n-EHAP NCs. Experimental results indicated that the addition of water-soluble acetone greatly promoted the formation of individual n-EHAP NCs without aggregation, and furthermore, the successful incorporation of hydrophobic 2-BrMP groups led to formation of porously structured n-EHAP NCs with a higher surface area and an increasing micro-/mesopore ratio. Compared with pristine n-HAP, n-EHAP NCs exhibited lower crystallinity with smaller crystallite size and demonstrated an ultrahigh adsorption capacity for Pb(II) in acidic solution with a record of close to 2400 mg/g. The improved performance of n-EHAP NCs originated from both the suitable porous structure with a higher micro-/mesoporosity ratio and the existing tethered 2-BrMP group-induced the ester bond, providing more adsorption active affinity sites for heavy metal ions. The highly efficient adsorption (99.99%) was further achieved using tap water spiked with traces of Pb(II) (63 ppb). The presented findings promise the application of n-EHAP NCs in water treatment as an alternative, low-cost, and ecofriendly adsorbent for environmental remediation.

Successive removal of Pb2+ and Congo red by magnetic phosphate nanocomposites from aqueous solution

The successive removal of Pb²⁺ and Congo red (CR) from aqueous solution by three magnetic phosphate nanocomposites (Fe₃O₄@Sr₅(PO₄)₃(OH), Fe₃O₄@Ba₃(PO₄)₂, and Fe₃O₄@Sr_5xBa_3x(PO₄)₃(OH), denominated FSP, FBP, and FSBP, respectively) was systematically investigated in comparison with Fe₃O₄ (denominated F) nanoparticle. FSP, FSBP, F, and FBP exhibited a high removal capacity of 351, 272, 76, and 23 mg/g for Pb²⁺, respectively. These materials could be reclaimed by magnetic separation and then used for successive CR remediation, showing a high CR removal capacity of 224, 163, 126, and 61 mg/g, respectively. The isothermal and kinetic behavior fitted well with the Langmuir model and pseudo-second-order model, respectively. The successive removal mechanism by these magnetic phosphates was proposed to be the ion exchange between Pb²⁺ and Sr²⁺ in the lattice and then the loaded Pb²⁺ could contact with anionic dye CR to form precipitation on the surface of materials, inhibiting the leaching of Pb²⁺ ions from the reclaimed materials back into water. In addition, these materials showed good reusability and practical application. This study demonstrated the potential of these low cost phosphate nanocomposites as promising materials for successive removal of Pb²⁺ and CR from water.

Mxene/alginate composites for lead and copper ion removal from aqueous solutions

Mxene has been widely used as a sorbent to remove heavy metal ions from sewage due to its unique two-dimensional layered structure and abundant oxygen-containing groups. However, Mxene has a relatively limited adsorption capacity for metal ions possibly due to the limited adsorption active sites. Herein, we reported novel Mxene/alginate composites for lead and copper ion removal from wastewater. The Mxene/alginate composites prepared in this study not only enhance the chelation ability of the lead and copper ions, but also accelerate the ion transport efficiency. The combined advantages of high adsorption capacity and short equilibrium time enable the Mxene/alginate composites to achieve the maximum adsorption capacity for Pb²⁺ and Cu²⁺ at 382.7 and 87.6 mg g⁻¹, respectively, and reach the adsorption equilibrium in 15 min. We believe that the composites developed in this study can open a new avenue for designing high adsorption capacity and high efficiency adsorbents.

Studies on Mxene/alginate composite adsorption have opened up a new avenue for designing adsorbents possessing high adsorption capacity and high efficiency.

Lanthanum phosphate/chitosan scaffolds enhance cytocompatibility and osteogenic efficiency via the Wnt/β-catenin pathway

BACKGROUND

Fabrication of porous scaffolds with great biocompatibility and osteoinductivity to promote bone defect healing has attracted extensive attention.

METHODS

In a previous study, novel lanthanum phosphate (LaPO4)/chitosan (CS) scaffolds were prepared by distributing 40- to 60-nm LaPO4 nanoparticles throughout plate-like CS films.

RESULTS

Interconnected three dimensional (3D) macropores within the scaffolds increased the scaffold osteoconductivity, thereby promoting cell adhesion and bone tissue in-growth. The LaPO4/CS scaffolds showed no obvious toxicity and accelerated bone generation in a rat cranial defect model. Notably, the element La in the scaffolds was found to promote osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) through the Wnt/β-catenin signalling pathway and induced high expression of the osteogenesis-related genes alkaline phosphatase, osteocalcin and Collagen I (Col-I). Moreover, the LaPO4/CS scaffolds enhanced bone regeneration and collagen fibre deposition in rat critical-sized calvarial defect sites.

CONCLUSION

The novel LaPO4/CS scaffolds provide an admirable and promising platform for the repair of bone defects.

Efficient Removal of Lead, Copper and Cadmium Ions from Water by a Porous Calcium Alginate/Graphene Oxide Composite Aerogel

In this study, we fabricated a porous calcium alginate/graphene oxide composite aerogel by using polystyrene colloidal particles as sacrificial template and graphene oxide as a reinforcing filler. Owing to the excellent metal chelation ability of calcium alginate and controlled nanosized pore structure, the as-prepared calcium alginate/graphene oxide composite aerogel (mp-CA/GO) can reach the adsorption equilibrium in 40 min, and the maximum adsorption capacity for Pb²⁺, Cu²⁺ and Cd²⁺ is 368.2, 98.1 and 183.6 mg/g, respectively. This is higher than most of the reported heavy metal ion sorbents. Moreover, the mp-CA/GO can be regenerated through simple acid-washing and be used repeatedly with little loss in performance. The adsorption mechanism analysis indicates that the mp-CA/GO adsorb the heavy metal ions mainly through the ion exchange and chemical coordination effects.

Efficient Removal of Lead Ions from Water by a Low-Cost Alginate-Melamine Hybrid Sorbent

A low-cost alginate-melamine hybrid sorbent (named as Alg-Mel) was designed and synthesized for the removal of Pb2+ from water. The as-prepared Alg-Mel sorbent exhibited high affinity and selectivity to Pb2+. The selectivity coefficients of the Alg-Mel for Pb2+/Cd2+, Pb2+/Cu2+, Pb2+/Cr3+ and Pb2+/Co2+ were all over 7. It is found that the hybrid sorbent could uptake 95.4% of Pb2+ from Pb2+-containing solutions (0.48 mM), and the maximum adsorption capacity for Pb2+ reaches 1.39 mmol/g (287.7 mg/g), which is much higher than that of most reported lead ion-sorbents. Furthermore, the Alg-Mel can be regenerated by a simple acid-washing process and used repeatedly. The results of adsorption mechanism analysis reveal that the adsorption of Pb2+ by Alg-Mel is mainly ascribed to the chemical coordination and ion exchange effects.

The synthesis of super-small nano hydroxyapatite and its high adsorptions to mixed heavy metallic ions

A "molecular cage" was possibly built in glucose alkaline solution to limit the chemical reaction in a tiny space to control the size and morphology of HA nanoparticles. A possible reaction mechanism of HA nanoparticles confined space synthesis was proposed in this work. The super-small HA nanoparticles were successfully obtained in the first time in mild and green condition which had a 7 nm diameter. The adsorptions to Pb²⁺, Zn²⁺, Ni²⁺, Cd²⁺ ions in their mixture solution by the synthesized HA nanoparticles were studied. The adsorbent showed huge adsorption capacities for the targets (Pb²⁺ = 3289 mg/g, Zn²⁺ = 3150 mg/g, Ni²⁺ = 3061 mg/g and Cd²⁺ = 2784 mg/g), which indicated an excellent performance of the synthesized nano material in water treatment. Freundlich equation analysis and SEM images of the adsorption products suggested multilayer adsorptions to the targets, and a new recrystalline type adsorption on the surface of the host was found. Some Ca atoms in HA nanoparticles were also found to be substituted by the heavy metallic elements in the initial stage of the adsorptions. The synthesized nano material exhibits better application prospect in wastewater treatment field for its easy synthesis, low-cost and environmental friendly properties.

Magnetic Mesoporous Calcium Sillicate/Chitosan Porous Scaffolds for Enhanced Bone Regeneration and Photothermal-Chemotherapy of Osteosarcoma

The development of multifunctional biomaterials to repair bone defects after neoplasm removal and inhibit tumor recurrence remained huge clinical challenges. Here, we demonstrate a kind of innovative and multifunctional magnetic mesoporous calcium sillicate/chitosan (MCSC) porous scaffolds, made of M-type ferrite particles (SrFe₁₂O₁₉), mesoporous calcium silicate (CaSiO₃) and chitosan (CS), which exert robust anti-tumor and bone regeneration properties. The mesopores in the CaSiO₃ microspheres contributed to the drug delivery property, and the SrFe₁₂O₁₉ particles improved photothermal therapy (PTT) conversion efficacy. With the irradiation of NIR laser, doxorubicin (DOX) was rapidly released from the MCSC/DOX scaffolds. In vitro and in vivo tests demonstrated that the MCSC scaffolds possessed the excellent anti-tumor efficacy via the synergetic effect of DOX drug release and hyperthermia ablation. Moreover, BMP-2/Smad/Runx2 pathway was involved in the MCSC scaffolds promoted proliferation and osteogenic differentiation of human bone marrow stromal cells (hBMSCs). Taken together, the MCSC scaffolds have the ability to promote osteogenesis and enhance synergetic photothermal-chemotherapy against osteosarcoma, indicating MCSC scaffolds may have great application potential for bone tumor-related defects.

Preparation and characterization of mesoporous hydroxyapatite with non-cytotoxicity and heavy metal adsorption capacity

Mesoporous hydroxyapatite (MPHA) particles have recently gained a great deal of interest in a broad range of fields including biomedical fields, wastewater treatment and catalysis.

SC79-loaded ZSM-5/chitosan porous scaffolds with enhanced stem cell osteogenic differentiation and bone regeneration

For effectively treating bone defects, the design of novel therapeutic scaffolds is an important strategy for enhancing stem cell osteogenic differentiation and new bone formation. Herein, we, for the first time, fabricated SC79-loaded ZSM-5/chitosan (ZSM-5/CS/SC79) porous scaffolds via the freeze-drying synthesis of ZSM-5/CS porous scaffolds followed by loading SC79 drug molecules. The ZSM-5/CS scaffolds possessed a three-dimensional (3D) interconnected porous structure, and the nanostructured ZSM-5 ellipsoids were uniformly dispersed on the CS films. The ZSM-5/CS/SC79 scaffolds had appropriate drug loading-release properties due to the hierarchically porous structures of ZSM-5 zeolites and the hydrogen bonding between the CS and SC97. In vitro cell tests demonstrated that both the ZSM-5/CS and ZSM-5/CS/SC79 scaffolds could promote the adhesion, spreading and proliferation of human bone mesenchymal stem cells (hBMSCs). Interestingly, the SC97 released from the scaffolds not only promoted the proliferation of hBMSCs, but also enhanced the osteogenic differentiation. As compared with the ZSM-5/CS control group, the ZSM-5/CS/SC79 scaffolds promoted the ALP activity of hBMSCs, improved the mRNA relative expression levels of osteocalcin (OCN), bone morphogenetic protein-2 (BMP-2) and alkaline phosphatise (ALP), and increased the protein level of β-catenin. The enhanced proliferation and osteogenic differentiation of hBMSCs contributed to the upregulation of Akt kinase by an activated Wnt/β-catenin signaling pathway. Moreover, in vivo animal tests indicated that SC79 released from the ZSM-5/CS/SC79 scaffolds promoted the new bone regeneration without systemic side effects in cranial defects. Therefore, ZSM-5/CS/SC79 scaffolds as novel and promising therapeutic scaffolds have promising applications in defined local bone regeneration.

MgAl layered double hydroxide/chitosan porous scaffolds loaded with PFTα to promote bone regeneration

Poor bone formation remains a key risk factor associated with acellular scaffolds that occurs in some bone defects, particularly in patients with metabolic bone disorders and local osteoporosis. We herein fabricated for the first time layered double hydroxide-chitosan porous scaffolds loaded with PFTα (LDH-CS-PFTα scaffolds) as therapeutic bone scaffolds for the controlled release of PFTα to enhance stem cell osteogenic differentiation and bone regeneration. The LDH-CS scaffolds had three-dimensional interconnected macropores, and plate-like LDH nanoparticles were uniformly dispersed within or on the CS films. The LDH-CS scaffolds exhibited appropriate PFTα drug delivery due to hydrogen bonding among LDH, CS and PFTα. In vitro functional studies demonstrated that the PFTα molecules exhibited potent ability to induce osteogenesis of hBMSCs via the GSK3β/β-catenin pathway, and the LDH-CS-PFTα scaffolds significantly enhanced the osteogenic differentiation of hBMSCs. In vivo studies revealed significantly increased repair and regeneration of bone tissue in cranial defect model rats compared to control rats at 12 weeks post-implantation. In conclusion, the LDH-CS-PFTα scaffolds exhibited excellent osteogenic differentiation and bone regeneration capability and hold great potential for applications in defined local bone regeneration.

3D hierarchical flower-like nickel ferrite/manganese dioxide toward lead (II) removal from aqueous water

A functionalized magnetic nickel ferrite/manganese dioxide (NiFe₂O₄/MnO₂) with 3D hierarchical flower-like and core-shell structure was synthesized by a facile hydrothermal approach and applied for the removal of Pb(II) ions from aqueous solutions. Batch adsorption experiments were conducted to study the effect of solution pH, initial Pb(II) concentration, and dose of absorbents on the Pb(II) removal by NiFe₂O₄/MnO₂. The NiFe₂O₄/MnO₂ nanocomposites showed the fast Pb(II) adsorption performance with the maximum adsorption capacity of 85.78mgg^-1. The adsorption kinetics of Pb(II) onto NiFe₂O₄/MnO₂ obeyed a pseudo-second-order model. The isothermal experimental results indicated that the Langmuir model was fitted better than the Freundlich model, illustrating a monolayer adsorption process for Pb(II) onto NiFe₂O₄/MnO₂. Meanwhile, the NiFe₂O₄/MnO₂ was easily separated from the solution by an external magnet within a short period of time and still exhibited almost 80% removal capacity after six regenerations. The NiFe₂O₄/MnO₂ is expected to be a new promising adsorbent for heavy metal removal.

Synthesis and Characterization of Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron (nZVI/rGO) Composites Used for Pb(II) Removal

Reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) composites were prepared by chemical deposition method and were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, N₂-sorption and X-ray photoelectron spectroscopy (XPS). Operating parameters for the removal process of Pb(II) ions, such as temperature (20–40 °C), pH (3–5), initial concentration (400–600 mg/L) and contact time (20–60 min), were optimized using a quadratic model. The coefficient of determination (R² > 0.99) obtained for the mathematical model indicates a high correlation between the experimental and predicted values. The optimal temperature, pH, initial concentration and contact time for Pb(II) ions removal in the present experiment were 21.30 °C, 5.00, 400.00 mg/L and 60.00 min, respectively. In addition, the Pb(II) removal by nZVI/rGO composites was quantitatively evaluated by using adsorption isotherms, such as Langmuir and Freundlich isotherm models, of which Langmuir isotherm gave a better correlation, and the calculated maximum adsorption capacity was 910 mg/g. The removal process of Pb(II) ions could be completed within 50 min, which was well described by the pseudo-second order kinetic model. Therefore, the nZVI/rGO composites are suitable as efficient materials for the advanced treatment of Pb(II)-containing wastewater.

Natural polysaccharides leading to super adsorbent hydroxyapatite nanoparticles for the removal of heavy metals and dyes from aqueous solutions

Water pollution has created a major impact on the environment mainly due to contaminated industrial effluents with toxic substances such as heavy metals and textile dyes.

Mesoporous carbonated hydroxyapatite/chitosan porous materials for removal of Pb(ii) ions under flow conditions

Mesoporous carbonated hydroxyapatite/chitosan porous materials are fabricated for the first time, which show good adsorption properties for Pb(ii) ions even under flow conditions.

Preparation of chitosan/nano hydroxyapatite organic-inorganic hybrid microspheres for bone repair

In this work, we encapsulated icariin (ICA) into chitosan (CS)/nano hydroxyapatite (nHAP) composite microspheres to form organic-inorganic hybrid microspheres for drug delivery carrier. The composition and morphology of composite microspheres were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and differential scanning calorimetry- thermogravimetric analysis (DSC-TGA). Moreover, we further studied the performance of swelling properties, degradation properties and drug release behavior of the microspheres. ICA, the extract of traditional Chinese medicine-epimedium, was combined to study drug release properties of the microspheres. ICA loaded microspheres take on a sustained release behavior, which can be not only ascribed to electrostatic interaction between reactive negative hydroxyl (OH) of ICA and positive amine groups (NH₂) of CS, but also depended on the homogeneous dispersion of HAP nanoparticles inside CS organic matrix. In addition, the adhesion and morphology of osteoblasts were detected by inverted fluorescence microscopy. The biocompatibility of CS/nHAP/ICA microspheres was evaluated by the MTT cytotoxicity assay, Hoechst 33258 and PI fluorescence staining. These studies demonstrate that composite microspheres provide a suitable microenvironment for osteoblast attachment and proliferation. It can be speculated that the ICA loaded CS-based organic-inorganic hybrid microspheres might have potential applications in drug delivery systems.

Bioinspired fabrication and lead adsorption property of nano-hydroxyapatite/chitosan porous materials

Nano-hydroxyapatite/chitosan porous materials possess great applications for removal of Pb²⁺ ions from environmental and industrial wastes.