Facile Preparation of Polyacrylonitrile-Based Activated Carbon Fiber Felts for Effective Adsorption of Dipropyl Sulfide

Activated carbon fibers (ACFs) derived from various polymeric fibers with the characteristics of a high specific surface area, developed pore structure, and good flexibility are promising for the new generation of chemical protection clothing. In this paper, a polyacrylonitrile-based ACF felt was prepared via the process of liquid phase pre-oxidation, along with a one-step carbonization and chemical activation method. The obtained ACF felt exhibited a large specific surface area of 2219.48 m2/g and pore volume of 1.168 cm3/g, as well as abundant polar groups on the surface. Owing to the developed pore structure and elaborated surface chemical property, the ACF felt possessed an intriguing adsorption performance for a chemical warfare agent simulant dipropyl sulfide (DPS), with the highest adsorption capacity being 202.38 mg/g. The effects of the initial concentration of DPS and temperature on the adsorption performance of ACF felt were investigated. Meanwhile, a plausible adsorption mechanism was proposed based on the kinetic analysis and fitting of different adsorption isotherm models. The results demonstrated that the adsorption process of DPS onto ACF felt could be well fitted with a pseudo-second-order equation, indicating a synergistic effect of chemical adsorption and physical adsorption. We anticipate that this work could be helpful to the design and development of advanced ACF felts for the application of breathable chemical protection clothing.

Reactive Molecular Dynamics Simulations of Polystyrene Pyrolysis

Polymers' controlled pyrolysis is an economical and environmentally friendly solution to prepare activated carbon. However, due to the experimental difficulty in measuring the dependence between microstructure and pyrolysis parameters at high temperatures, the unknown pyrolysis mechanism hinders access to the target products with desirable morphologies and performances. In this study, we investigate the pyrolysis process of polystyrene (PS) under different heating rates and temperatures employing reactive molecular dynamics (ReaxFF-MD) simulations. A clear profile of the generation of pyrolysis products determined by the temperature and heating rate is constructed. It is found that the heating rate affects the type and amount of pyrolysis intermediates and their timing, and that low-rate heating helps yield more diverse pyrolysis intermediates. While the temperature affects the pyrolytic structure of the final equilibrium products, either too low or too high a target temperature is detrimental to generating large areas of the graphitized structure. The reduced time plots (RTPs) with simulation results predict a PS pyrolytic activation energy of 159.74 kJ/mol. The established theoretical evolution process matches experiments well, thus, contributing to preparing target activated carbons by referring to the regulatory mechanism of pyrolytic microstructure.

Efficient adsorption of hexavalent chromium ions onto novel ferrochrome slag/polyaniline nanocomposite: ANN modeling, isotherms, kinetics, and thermodynamic studies

The current research is concerned with the adsorption behavior of chromium (IV) ions in an aqueous solution using a novel ferrochrome slag/polyaniline nanocomposite (FeCr-PANI) adsorbent. The effect of process parameters such as temperature, pH solution, initial Cr (VI) ions concentration, adsorbent dosage, and contact time on the adsorption process is experimentally investigated in this study. Furthermore, we have trained a multilayer artificial neural network (ANN) using the experimental data of various process parameters to successfully predict the adsorption behavior of chromium (IV) ions onto the FeCr-PANI adsorbent. The ANN model was trained using the Lavenberg-Marquardt algorithm and ten neurons in the hidden layer and was able to estimate the % removal efficiency of chromium (IV) under the influence of different process parameters (R² = 0.991). Initial solution pH was observed to have a significant influence on the % removal efficiency. The % removal efficiency was found to be high at 97.10% for the solution with pH 3 but decreased to 64.40% for the solution with pH 11. Cr (VI) % removal efficiency was observed to increase with an increase in solution temperature, adsorbent dosage, and contact time. However, the % removal efficiency was found to decrease from 96.9 to 54.8% with increasing the initial dye concentration from 100 to 400 ppm. Furthermore, the adsorption capacity increased from 9.69 to 21.93 mg/g with an increase in the initial concentration from 100 to 400 ppm, as expected. The Langmuir isotherm model exhibited the best fit with the experimental data (R² = 0.9977). The maximum adsorption capacity was found to be 22.523 mg g^-1 at 298 K. The experimental data fitted well with the pseudo-second-order kinetic model.

Recycling of Waste Cotton Sheets into Three-Dimensional Biodegradable Carriers for Removal of Methylene Blue

Waste cotton sheets (WCS) are promising cellulose sources due to their high content of cellulose and large amount of disposal every year, which could be recycled and employed as low-cost structural materials. The present work aims at investigating the efficacy of hydrogel adsorbents prepared from regenerated WCS as the carriers of activated carbon (AC) for treating the dye-contaminated water. Activated WCS was directly dissolved in lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) solvent and then regenerated into cellulose hydrogels, which were employed as three-dimensional biodegradable matrices for loading an extremely high content of AC (up to 5000%). The morphology and properties of resultant adsorbents were studied in detail. The results showed that different washing methods and contents of AC and cellulose had obvious effects on water contents, mechanical properties, and adsorption capacities of AC/WCS hydrogels. Especially, the hydrogels containing high AC content washed by gradient ethanol solvent exhibited outstanding compressive strengths of up to 3.0 MPa at 60% strain, while the adsorption capacity of 5000%AC/0.3CS toward a model dye methylene blue (MB, initial concentration of 200 mg/L) reached 174.71 mg/g at pH 6.9 and 35 °C. This was comparable to the adsorption capacity of original AC powders, while no AC powders were released from hydrogels to water. The adsorption of MB followed the Dubinin-Astakhov model and pseudo-first-order mechanism. Thermodynamic studies showed the spontaneous and endothermic nature of the overall physical adsorption process. Therefore, this work demonstrates the feasibility to recycle WCS into biodegradable carriers of functional compounds, and the AC/regenerated cellulose hydrogels have a high potential as a promising adsorbent with low-cost and convenient separation for dye removal from wastewater.

Poly(acryloyl hydrazide)-grafted cellulose nanocrystal adsorbents with an excellent Cr(VI) adsorption capacity

In this study, we prepared poly(acryloyl hydrazide) (PAH)-grafted cellulose nanocrystal (CNC-PAH) particles via the atom transfer radical polymerization method for application to Cr(VI) adsorption. The closely-packed PAH chains grafted on the cellulose nanocrystal (CNC) surface provide a high density of amine groups that can adsorb Cr(VI) through strong electrostatic, hydrogen bonding and chelating interactions. CNC-PAH exhibited the optimum Cr(VI) adsorption capacity at the solution pH = 3, where its electrostatic attraction with Cr(VI) was maximized. Cr(VI) was chemisorbed in CNC-PAH by following the Langmuir isotherm mechanism (homogeneous monolayer adsorption). The Cr(VI) adsorption kinetics of CNC-PAH was controlled predominantly by intra-particle diffusion resistance imparted by the PAH shell layer. Thermodynamic analysis revealed that Cr(VI) adsorption of CNC-PAH is a spontaneous and endothermic process. Importantly, CNC-PAH grafted with the higher M_w (∼50 kg mol^-1) PAH exhibited a rapid Cr(VI) adsorption rate and remarkably high Cr(VI) adsorption capacity (∼457.6 mg g^-1 at 298.15 K), exceeding those of previously reported adsorbents owing to its numerous Cr(VI)-adsorptive amine groups provided by the closely-packed grafted PAH polymers. Furthermore, CNC-PAH showed excellent reusability to maintain its high adsorption ability during repeated adsorption-desorption cycles owing to the covalently binding nature of the PAH polymers.

Influence of sodium dodecyl sulfate coating on adsorption of methylene blue by biochar from aqueous solution

Biochar is regarded as a promising new class of materials due to its multifunctional character and the possibility of effectively coupling different properties. With increasing introduction into the environment, environmental chemicals such as surfactants will load onto the released biochar and change its physicochemical characteristics and adsorption behavior toward pollutants. In this study, sodium dodecyl sulfate (SDS), as one type of anionic surfactant, was coated onto biochar with different loading amounts. The influence of SDS loading onto biochar's physicochemical properties were investigated by Fourier transform infrared (FT-IR) spectroscopy, elemental analysis, zeta potential and Brunauer-Emmett-Teller (BET) surface area and pore size distribution analysis. Results showed that the pore size of the biochar decreased gradually with the increase of SDS loading because of the surface-adsorption and pore-blocking processes; the pH of the point of zero charge (pH_PZC) decreased with increasing SDS loading. Although surface-coating with SDS decreased the pore size of the biochar, its adsorption capacity toward Methylene Blue (MB) significantly increased. The biochar-bound SDS introduced functional groups and negative charges to the biochar surface, which could thus enhance the adsorption of MB via hydrogen bonding and electrostatic interaction. The results can shed light on the underlying mechanism of the influence of anionic surfactants on the adsorption of MB by biochar.

A Novel Nitrogen Enriched Hydrochar Adsorbents Derived from Salix Biomass for Cr (VI) Adsorption

Hydrochars were prepared from Salix by hydrothermal carbonization, and characterized by FT-IR, ¹³C NMR, XPS, UV-vis, TG, SEM and BET techniques. The results showed that the hydrochars with molecular sieve-type open pore structure contained numbers of oxygen and nitrogen functional groups, which benefited the adsorption and diffusion of adsorbent Cr (VI). The hydrochar obtained from 26 h reaction (HC-26) was indicated an excellent adsorbent compared to the commercial activated carbon, and its maximum removal efficiency for Cr (VI) reaches up to 99.84% at pH 1. Langmuir´s model is well fitted the experimental equilibrium adsorption data of total Cr. The bath experiment results showed that Cr (VI) could be removed rapidly in the first 300 min. Furthermore, the adsorption kinetics process of HC-26 could be described by pseudo-second-order model. Based on the above results, HC-26 could be acted as a potential efficient adsorbent for removal of Cr (VI) from aqueous solution.

One-pot synthesis of nitrogen-enriched carbon spheres for hexavalent chromium removal from aqueous solution

Nitrogen-enriched carbon spheres (NECS) with high nitrogen content (10.21 wt%) had been prepared and presented superior Cr(vi) removal capacity as high as 279 mg g⁻¹.

Efficient batch and column removal of Cr(vi) by carbon beads with developed nano-network

Alginate-derived carbon beads with a developed nano-network were successfully synthesizedviaa facile carbothermal reduction and acid-washing treatment. The product was used for Cr(vi) removal with easy recovery features.

Monolithic magnetic carbonaceous beads for efficient Cr(vi) removal from water

Alginate-derived magnetic monolithic carbonaceous beads were synthesized for the first time, aiming for efficient Cr(vi) removal, easy recovery and reusability.

Microstructured macroporous adsorbent composed of polypyrrole modified natural corncob-core sponge for Cr(vi) removal

A high-performance, cost-effective and spongy adsorbent is rationally designed for Cr(vi) removal based on polypyrrole modified corncob-core natural microsheets.

Versatile Cellulose-Based Carbon Aerogel for the Removal of Both Cationic and Anionic Metal Contaminants from Water

Hydrothermal carbonization of cellulose in the presence of the globular protein ovalbumin leads to the formation of nitrogen-doped carbon aerogel with a fibrillar continuous carbon network. The protein plays here a double role: (i) a natural source of nitrogen functionalities (2.1 wt %) and (ii) structural directing agent (S(BET) = 38 m(2)/g). The applicability in wastewater treatment, namely, for heavy metal removal, was examined through adsorption of Cr(VI) and Pb(II) ion solely and in a mixed bicomponent aqueous solutions. This cellulose-based carbogel shows an enhanced ability to remove both Cr(VI) (∼68 mg/g) and Pb(II) (∼240 mg/g) from the targeted solutions in comparison to other carbon materials reported in the literature. The presence of competing ions showed little effect on the adsorption efficiency toward Cr(VI) and Pb(II).

A magnetically-separable Fe3O4nanoparticle surface grafted with polyacrylic acid for chromium(iii) removal from tannery effluents

A magnetically-separable nanoadsorbent was synthesized, and evaluated as an alternative for chromium(iii) removal from tannery effluent.

The efficient adsorption removal of Cr(vi) by using Fe3O4 nanoparticles hybridized with carbonaceous materials

Carbonaceous materials, such as pinecone and graphene, have been hybridized with Fe₃O₄ to modify its surface properties and enhance its adsorption efficiency for Cr(vi) removal in aqueous solution.

Sodium alginate-based magnetic carbonaceous biosorbents for highly efficient Cr(vi) removal from water

A novel magnetic alginate-based biosorbent, aiming for efficient removal of Cr(vi) from aqueous system, was successfully synthesized.