Structural insights into the distinct substrate preferences of two bacterial epoxide hydrolases

Epoxide hydrolases (EHs), which catalyze the transformation of epoxides to diols, are present in many eukaryotic and prokaryotic organisms. They have recently drawn considerable attention from organic chemists owing to their application in the semisynthesis of enantiospecific diol compounds. Here, we report the crystal structures of BoEH from Bosea sp. PAMC 26642 and CaEH from Caballeronia sordidicola PAMC 26510 at 1.95 and 2.43 Å resolution, respectively. Structural analysis showed that the overall structures of BoEH and CaEH commonly possess typical α/β hydrolase fold with the same ring-opening residues (Tyr-Tyr) and conserved catalytic triad residues (Asp-Asp-His). However, the two enzymes were found to have significantly different sequence compositions in the cap domain region, which is involved in the formation of the substrate-binding site in both enzymes. Enzyme activity assay results showed that BoEH had the strongest activity toward the linear aliphatic substrates, whereas CaEH had a higher preference for aromatic- and cycloaliphatic substrates. Computational docking simulations and tunnel identification revealed important residues with different substrate-binding preferences. Collectively, structure comparison studies, together with ligand docking simulation results, suggested that the differences in substrate-binding site residues were highly correlated with substrate specificity.

Epoxide Hydrolases: Multipotential Biocatalysts

Epoxide hydrolases are attractive and industrially important biocatalysts. They can catalyze the enantioselective hydrolysis of epoxides to the corresponding diols as chiral building blocks for bioactive compounds and drugs. In this review article, we discuss the state of the art and development potential of epoxide hydrolases as biocatalysts based on the most recent approaches and techniques. The review covers new approaches to discover epoxide hydrolases using genome mining and enzyme metagenomics, as well as improving enzyme activity, enantioselectivity, enantioconvergence, and thermostability by directed evolution and a rational design. Further improvements in operational and storage stabilization, reusability, pH stabilization, and thermal stabilization by immobilization techniques are discussed in this study. New possibilities for expanding the synthetic capabilities of epoxide hydrolases by their involvement in non-natural enzyme cascade reactions are described.

Simultaneous improvement of the thermostability and activity of lactic dehydrogenase from Lactobacillus rossiae through rational design

d-Phenyllactic acid, is a versatile organic acid with wide application prospects in the food, pharmaceutical and material industries. Wild-type lactate dehydrogenase LrLDH from Lactobacillus rossiae exhibits a high catalytic performance in the production of d-phenyllactic acid from phenylpyruvic acid or sodium phenylpyruvate, but its industrial application is hampered by poor thermostability. Here, computer aided rational design was applied to improve the thermostability of LrLDH. By using HotSpot Wizard 3.0, five hotspot residues (N218, L237, T247, D249 and S301) were identified, after which site-saturation mutagenesis and combined mutagenesis were performed. The double mutant D249A/T247I was screen out as the best variant, with optimum temperature, t_1/2, and T¹⁰₅₀ that were 12 °C, 17.96 min and 19 °C higher than that of wild-type LrLDH, respectively. At the same time, the k_cat/K_m of D249A/T247I was 1.47 s⁻¹ mM⁻¹, which was 3.4 times higher than that of the wild-type enzyme. Thus rational design was successfully applied to simultaneously improve the thermostability and catalytic activity of LrLDH to a significant extent. The results of molecular dynamics simulations and molecular structure analysis could explain the mechanisms for the improved performance of the double mutant. This study shows that computer-aided rational design can greatly improve the thermostability of d-lactate dehydrogenase, offering a reference for the modification of other enzymes.

The d-LDH was engineered using computationally-assisted rational mutagenesis. The two mutants D249A and D249A/T247I showed significantly enhanced thermostability and catalytic activity to sodium phenylpyruvate compared with the wild-type enzyme.

Highly regio- and enantio-selective hydrolysis of two racemic epoxides by GmEH3, a novel epoxide hydrolase from Glycine max

A novel epoxide hydrolase from Glycine max, designated GmEH3, was excavated based on the computer-aided analysis. Then, gmeh3, a GmEH3-encoding gene, was cloned and successfully expressed in E. coli Rosetta(DE3). Among the ten investigated rac-epoxides, GmEH3 possessed the highest and best complementary regioselectivities (regioselectivity coefficients, αS = 93.7% and βR = 97.2%) in the asymmetric hydrolysis of rac-m-chlorostyrene oxide (5a), and the highest enantioselectivity (enantiomeric ratio, E = 55.6) towards rac-phenyl glycidyl ether (7a). The catalytic efficiency (kcatS/KmS = 2.50 mM-1 s-1) of purified GmEH3 for (S)-5a was slightly higher than that (kcatR/KmR = 1.52 mM-1 s-1) for (R)-5a, whereas the kcat/Km (5.16 mM-1 s-1) for (S)-7a was much higher than that (0.09 mM-1 s-1) for (R)-7a. Using 200 mg/mL wet cells of E. coli/gmeh3 as the biocatalyst, the scale-up enantioconvergent hydrolysis of 150 mM rac-5a at 25 °C for 1.5 h afforded (R)-5b with 90.2% eep and 95.4% yieldp, while the kinetic resolution of 500 mM rac-7a for 2.5 h retained (R)-7a with over 99% ees and 43.2% yields. Furthermore, the sources of high regiocomplementarity of GmEH3 for (S)- and (R)-5a as well as high enantioselectivity towards rac-7a were analyzed via molecular docking (MD) simulation.

Greatly enhancing the enantioselectivity of PvEH2, a Phaseolus vulgaris epoxide hydrolase, towards racemic 1,2-epoxyhexane via replacing its partial cap-loop

To achieve the kinetic resolution and enantioconvergent hydrolysis of rac-1,2-epoxyhexane, the E value of PvEH2 was enhanced by substituting its partial cap-loop. Based on the experimental results reported previously and computer-aided analysis, the flexible and variable cap-loop, especially its middle segment, was speculated to be related to the catalytic properties of PvEH2. In view of this, four PvEH2's hybrids, Pv2St, Pv2Pv1, Pv2Vr1 and Pv2Vr2, were designed by substituting the middle segment (¹⁹⁰EGMGSNLNTSMP²⁰¹) of a cap-loop in PvEH2 with the corresponding ones in StEH, PvEH1, VrEH1 and VrEH2, respectively. Then, the hybrid-encoding genes, pv2st, pv2pv1, pv2vr1 and pv2vr2, were constructed by fusion PCR, and expressed in E. coli Rosetta(DE3). The expressed hybrid, Pv2St, displayed the highest specific activity of 35.3 U/mg protein towards rac-1,2-epoxyhexane. The corresponding transformant, E. coli/pv2st, exhibited the largest E value of 24.2, which was 11.5-fold that of E. coli/pveh2 expressing PvEH2. The scale-up kinetic resolution of 280 mM rac-1,2-epoxyhexane was carried out using 40 mg dry cells/mL of E. coli/pv2st at 25 °C for 4.5 h, retaining (S)-1,2-epoxyhexane with >99.5% ee_s and 36.9% yield. Additionally, the chemo-enzymatic enantioconvergent hydrolysis of rac-1,2-epoxyhexane using E. coli/pv2st followed by sulfuric acid produced (R)-hexane-1,2-diol with 73.0% ee_p and 86.5% yield.

Enantioselective Hydrolysis of Styrene Oxide and Benzyl Glycidyl Ether by a Variant of Epoxide Hydrolase from Agromyces mediolanus

Enantiopure epoxides are versatile synthetic intermediates for producing optically active pharmaceuticals. In an effort to provide more options for the preparation of enantiopure epoxides, a variant of the epoxide hydrolase (vEH-Am) gene from a marine microorganism Agromyces mediolanus was synthesized and expressed in Escherichia coli. Recombiant vEH-Am displayed a molecular weight of 43 kDa and showed high stability with a half-life of 51.1 h at 30 °C. The purified vEH-Am exhibited high enantioselectivity towards styrene oxide (SO) and benzyl glycidyl ether (BGE). The vEH-Am preferentially converted (S)-SO, leaving (R)-SO with the enantiomeric excess (ee) >99%. However, (R)-BGE was preferentially hydrolyzed by vEH-Am, resulting in (S)-BGE with >99% ee. To investigate the origin of regioselectivity, the interactions between vEH-Am and enantiomers of SO and BGE were analyzed by molecular docking simulation. In addition, it was observed that the yields of (R)-SO and (S)-BGE decreased with the increase of substrate concentrations. The yield of (R)-SO was significantly increased by adding 2% (v/v) Tween-20 or intermittent supplementation of the substrate. To our knowledge, vEH-Am displayed the highest enantioselectivity for the kinetic resolution of racemic BGE among the known EHs, suggesting promising applications of vEH-Am in the preparation of optically active BGE.

An Overview on the Enhancement of Enantioselectivity and Stability of Microbial Epoxide Hydrolases

Epoxide hydrolases (EHs; 3.3.2.x) catalyze the enantioselective ring opening of racemic epoxides to the corresponding enantiopure vicinal diols and remaining equivalent unreacted epoxides. These epoxides and diols are used for the synthesis of chiral drug intermediates. With an upsurge in the methods for identification of novel microbial EHs, a lot of EHs have been discovered and utilized for kinetic resolution of racemic epoxides. However, there is still a constraint on the account of limited EHs being successfully applied on the preparative scale for industrial biotransformations. This limitation has to be overcome before application of identified functional EHs on large scale. Many strategies such as optimizing reaction media, immobilizing EHs and laboratory-scale directed evolution of EHs have been adopted for enhancing the industrial potential of EHs. In this review, these approaches have been highlighted which can serve as a pathway for the enrichment of already identified EHs for their application on an industrial scale in future studies.