Fully Flexible Covalent Organic Frameworks for Fluorescence Sensing 2,4,6-Trinitrophenol and p-Nitrophenol

Nitrophenols are important nitroaromatic compounds, both important environmental pollutants and dangerous explosives, posing a devastating danger and pollution threat to humans. It is vital to detect efficiently trace nitrophenols in the environment. In this contribution, a series of fully flexible cyclotriphosphazene-based COFs (FFCP COFs: HDADE, HBAPB, and HBPDA), prepared with both a flexible knot and flexible linkers of different lengths, were used for sensing 2,4,6-trinitrophenol (TNP) and p-nitrophenol (p-NP) in real time with excellent sensitivity and selectivity. The quenching constants of HDADE by TNP, HBAPB, and HBPDA by p-NP are 6.29 × 10⁴, 2.17 × 10⁵, and 2.48 × 10⁵ L·mol^-1, respectively. The LODs of TNP and p-NP are 1.19 × 10^-11, 6.91 × 10^-12, and 6.05 × 10^-12 mol·L^-1. Their sensitivities increase with the linker length, which is better than the corresponding COFs composed of rigid linkers. There is only a photoinduced electron transfer mechanism in the fluorescence quenching of HBPDA by p-NP. Meanwhile, the mechanisms of photoinduced charge transfer and resonance energy transfer exist in the fluorescence quenching of HDADE by TNP and the fluorescence quenching of HBAPB by p-NP.

Molecularly Imprinted Polymer-Based Sensors for Priority Pollutants

Globally, there is growing concern about the health risks of water and air pollution. The U.S. Environmental Protection Agency (EPA) has developed a list of priority pollutants containing 129 different chemical compounds. All of these chemicals are of significant interest due to their serious health and safety issues. Permanent exposure to some concentrations of these chemicals can cause severe and irrecoverable health effects, which can be easily prevented by their early identification. Molecularly imprinted polymers (MIPs) offer great potential for selective adsorption of chemicals from water and air samples. These selective artificial bio(mimetic) receptors are promising candidates for modification of sensors, especially disposable sensors, due to their low-cost, long-term stability, ease of engineering, simplicity of production and their applicability for a wide range of targets. Herein, innovative strategies used to develop MIP-based sensors for EPA priority pollutants will be reviewed.

Detection of tartrazine in fake saffron containing products by a sensitive optical nanosensor

A fluorescent assay for the selective analysis of tartrazine was developed. Tartrazine is a health-threatening food additive commonly used as fake saffron. An optical nanosensor was fabricated based on molecular imprinting technique in which carbon dots (CDs) as fluorophores and tartrazine as a template molecule were embedded in molecularly imprinted polymer (MIP) matrix. The synthesized CDs embedded in MIP (CDs-MIP) was characterized by various methods. The fluorescence intensity of (CDs-MIP) was selectively quenched in the presence of tartrazine in comparison with other similar food color additives. The correlation between the quenching of CD-MIP and the concentration of tartrazine was used as an optical sensing for rapid detection of tartrazine in the range of 3.3-20.0 nM (1.8-10.7 μg L^-1) with detection limit of 1.3 nM (0.70 μg L^-1). Eventually, the designed nanosensor was successfully applied for tartrazine detection in foodstuffs such as fake saffron, saffron tea and saffron ice cream samples.

Serratia marcescens-derived fluorescent carbon dots as a platform toward multi-mode bioimaging and detection of p-nitrophenol

Carbon dots (CDs) have excellent application prospects in various fields such as fluorescent dyes, but expanding their application, especially in bioimaging and the detection of organic pollutants, is still a major research objective. In this study, fluorescent CDs were successfully synthesized via the hydrothermal method using Serratia marcescens KMR-3. The platform based on CDs-KMR3 exhibited excellent stability, good biocompatibility, and low biotoxicity, and can be effectively applied to the imaging of bacteria, fungi, plant cells, protozoa and mammalian cells, and can specifically stain the membranes of all tested cells. In this study, for the first time, bacteria-derived CDs were used to image the representative species of organisms ranging from lower-order to higher-order organisms, thereby proving the feasibility of the application of CDs in the fluorescence imaging of Paramecium caudatum. Additionally, CDs-KMR3 can rapidly diffuse into all the parts of the leaf through diffusion into the veins and intercellular interstitium in response to the induction of transpiration. Moreover, the data illustrate that CDs-KMR3 are likely to enter the digestive tracts of microworms by ingestion through the oral cavity and pharynx, and spread to the pseudocoelom and somatic cells, and finally to be excreted from microworms through the anus. Furthermore, this platform can be utilized as fluorescent probes for the rapid and highly selective detection of p-nitrophenol (p-NP). Moreover, this study contributed to the increased application of bacteria-derived CDs in bioimaging and detection of p-NP.

A novel magnetic fluorescent molecularly imprinted sensor for highly selective and sensitive detection of 4-nitrophenol in food samples through a dual-recognition mechanism

In this study, surface imprinting, magnetic separation, and fluorescent detection were integrated to develop a dual-recognition sensor (MF-MIPs), which was used for highly selective and sensitive detection of 4-nitrophenol (4-NP) in food samples. Silane-functionalized carbon dots (Si-CDs) participated in the imprinting process and were uniformly distributed into the MIPs layers. MF-MIPs sensor exhibited a high fluorescence response and selectivity based on the dual-recognition mechanism of imprinting recognition and fluorescence identification. The relative fluorescence intensity of MF-MIPs sensor presented a good linear relationship in the range of 0.08-10 μmol·L^-1 with a low limit of detection (23.45 nmol·L¹) for 4NP. MF-MIPs sensor showed high anti-interference, as well as excellent stability and reusability. The 4-NP recovery from spiked food samples ranged from 93.20 to 102.15%, and the relative standard deviation was lower than 5.0%. Therefore, MF-MIPs sensor may be a promising method for 4-NP detection in food samples.

Applications of hydrothermal synthesis of Escherichia coli derived carbon dots in in vitro and in vivo imaging and p-nitrophenol detection

Carbon dots (CDs) have broad prospective applications in various fields, and expanding the applications of fluorescent CDs, especially for CDs derived from bacteria, is a major research goal. In this study, novel CDs derived from Escherichia coli BW25113 (WT) were successfully synthesized via a one-step hydrothermal method. Unlike previously developed CDs-E. coli, CDs-WT can be used for microbial imaging of both live and dead cells. We demonstrated the biocompatibility, excellent penetrability, and nontoxic characteristics of CDs-WT for use as fluorescent probes for bioimaging both in vitro and in vivo. Importantly, we provide the first demonstration of CDs-WT distribution in various organs of mice, including the ability to cross the blood-brain barrier and the potential for rapid excretion through the intestines. Additionally, CDs-WT can be instantly utilized as a fluorescent probe for the highly selective and rapid detection of p-nitrophenol (p-NP) by the inner filter effect, with a limit of detection for p-NP of 11 nM, the lowest value reported to date. Hence, our results demonstrate the feasibility of p-NP detection and extend the bio-imaging applications of CDs prepared from bacteria.

Molecularly imprinted polymers-captivity ZnO nanorods for sensitive and selective detecting environmental pollutant

To develop the semiconductor of ZnO nanomaterials as the fluorescence sensor without leakage toxicity. Here, a molecularly imprinted polymer captivity ZnO nanorods (NRs) (MIPs-captivity ZnO NRs) was fabricated by precipitation polymerization. Such traditional technology was not only achieved the specific recognition for direct fluorescent quantification of the target tetracycline (TC) through fluorescence quenching, but also formed the shield to reduce the toxic effects of ZnO towards organisms. Under the optimized experimental conditions, the MIPs-captivity ZnO NRs were effectively applied to the direct fluorescence quantification of TC with excellent stability. Moreover, the practical analytical performance of the MIPs-captivity ZnO NRs was assayed by appraising the detection effects of TC in water sample from the Yangtze River with satisfactory results.

Bacteria-derived fluorescent carbon dots for highly selective detection ofp-nitrophenol and bioimaging

Schematic of the synthetic route for fluorescent CDs-BC and their applications in the detection ofp-NP and bioimaging.

Imprinted Oxide and MIP/Oxide Hybrid Nanomaterials for Chemical Sensors †

The oxides of transition, post-transition and rare-earth metals have a long history of robust and fast responsive recognition elements for electronic, optical, and gravimetric devices. A wide range of applications successfully utilized pristine or doped metal oxides and polymer-oxide hybrids as nanostructured recognition elements for the detection of biologically relevant molecules, harmful organic substances, and drugs as well as for the investigative process control applications. An overview of the selected recognition applications of molecularly imprinted sol-gel phases, metal oxides and hybrid nanomaterials composed of molecularly imprinted polymers (MIP) and metal oxides is presented herein. The formation and fabrication processes for imprinted sol-gel layers, metal oxides, MIP-coated oxide nanoparticles and other MIP/oxide nanohybrids are discussed along with their applications in monitoring bioorganic analytes and processes. The sensor characteristics such as dynamic detection range and limit of detection are compared as the performance criterion and the miniaturization and commercialization possibilities are critically discussed.

Synthesis of molecularly imprinted carbon dot grafted YVO4:Eu(3+) for the ratiometric fluorescent determination of paranitrophenol

A facilely prepared ratiometric fluorescent molecularly imprinted sensor has been constructed for highly sensitive and selective detection of 4-nitrophenol (4-NP) using carbon dots (CDs) as the target sensitive fluorophore and YVO4: Eu(3+) nanoparticles (NPs) as the reference fluorophore. Through the hydrolysis and condensation reactions of the silica precursor, CDs and YVO4 Eu(3+) NPs can be incorporated into silica networks through silylation reaction by one pot synthesis procedure. The as-prepared fluorescent molecularly imprinted sensor shows characteristic fluorescence emissions of CDs (blue) and YVO4:Eu(3+) (red) under a single excitation wavelength. With the addition of 4-NP, the fluorescence of CDs is selectively quenched, resulting in the ratiometric fluorescence response. Under optimum conditions, the proposed sensor exhibits a high sensitivity with a linear range from 0 to 12.0μM and shows the limit of detection as low as 0.15μM in the determination of 4-NP, which is probably benefits from the tailor-made imprinted cavities for binding 4-NP. Furthermore, the proposed method was successfully applied for the determination of 4-NP in real water samples and human urine samples with great potentials for monitoring of 4-NP in environmental application.

Preparation of hemoglobin imprinted polymers based on graphene and protein removal assisted by electric potential

Hemoglobin (Hb) imprinted polymers based on graphene were prepared on the surface of Au electrode and protein removal assisted by electric potential was studied in detail.

A mesoporous fluorescent sensor based on ZnO nanorods for the fluorescent detection and selective recognition of tetracycline

Schematic for preparation of the mesoporous MIPs-ZnO NRs and non-mesoporous MIPs-ZnO NRs.